chocolate machine used for sale

This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details.

This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details.

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details.

This 3-axis DMG MORI CLX 450 V3 was manufactured in 2018. It features a maximum turning diameter of 400 mm and a turning length of 800 mm, with an impressive spindle speed of 4,000 rpm. The machine includes a 12-position VDI 40 turret and driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 1996. This Estarta 318 MV features a grinding diameter range of 1.5–120 mm and a maximum infeed grinding length of 254 mm. It includes a grinding wheel with dimensions of 610 × 254 × 304.8 mm and a powerful 22 kW drive motor. If you are looking to get high-quality grinding capabilities, consider the Estarta 318 MV machine we have for sale. Contact us for further details regarding this machine.

Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

This linear handing Krauss Maffei LRX150-MC5 was manufactured in 2008. It features an X-axis travel of 900 mm, Y-axis travel of 700 mm, and Z-axis travel of 2000 mm. The machine offers a versatile C-axis rotation of 0-180 degrees and an A-axis rotation of 0-270 degrees. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei LRX150-MC5 machine we have for sale. Contact us for further details.

wire EDM machine, year 2000. Used machine. More info & price on IndustrialBuyer.

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

Grinding machine XXIII DH3 ready for use from site in actual condition

die-sinking EDM machine, year 2009. Used machine. More info & price on IndustrialBuyer.

die-sinking EDM machine, year 2013. Used machine. More info & price on IndustrialBuyer.

The Konica Minolta AccurioPress C4080 is a high-performance production press for demanding print jobs. It combines high productivity with excellent color quality, precise register accuracy and exceptionally flexible media handling. Whether high-quality brochures, catalogues, mailings, business cards or personalised print products: The AccurioPress C4080 delivers reliable, professional-quality results. Intelligent automation functions reduce makeready times, optimize workflows and ensure economical production – even for short runs and frequently changing orders. With its wide range of finishing and configuration options, the AccurioPress C4080 adapts optimally to individual requirements. A future-proof solution for printers, in-house print centres and companies that want to combine quality, flexibility and efficiency. (This content was created using artificial intelligence ...

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

4000 x 2000mm 6000w with auto pallet changer

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VEB s/s bunker, type: 8260, machine number: 10227, year of construction: 1974, 220/380 V, roller width: 620 mm, inside dimensions: (2x) 790 mm x 1790 mm x 2500 mm, plastic belt width: (2x) 400 mm, total dimensions: 1950 mm x 1570 mm x 3600 mm.

Verbufa mobile hamburger forming machine, type: 51764-A-0004, serial number: 222442, year of construction: 2015, 230 V, 50 Hz, 10 A, 4 kW, weight: 300 kg, plastic belt, belt width: 150 mm, total dimensions: 1400 mm x 700 mm x 1650 mm. Including crate with spare parts.

Vemag vacuum filling machine, model: Robot 500, type: 128/40, number: 128.1087-1, 380/280 V, 50 Hz, 25 A, Rietschle vacuum pump, type: VVL I5 (01), capacity: 15 m³ per hour, dimensions: 580 mm x 1020 mm x 1320 mm.

Spiral kneader for 80 kg dough Dust cover stainless steel 2 drives (shell and dough hook separated) Mobile on wheels/ Weight 390 kg Exhibition machine therefore special price

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

Seval vertical bag form-, fill- and seal machine, diameter filling pipe: 75 mm, vertical seal length: 320 mm, horizontal seal length: 250 mm, total dimensions: 1600 mm x 1150 mm x 1670 mm. Including extra filling pipes, diameter filling pipes: (1x) 55 mm, (1x) 70 mm.

Steen mobile skinning machine for poultry, type: ST 600, serial number: 2G8/0321G, 380/480 V, 50/60 Hz, 5.8 A, 1950 W, working width: 430 mm, plastic belts, belt width: 430 mm, total dimensions: 2850 mm x 800 mm x 1480 mm. Including crate with spare parts.

Risco S.P.A. vacuum filling machine with lifter for 200 liter meat bins, type: RS 4001CP, serial number: Q294004, 380 V, 3 Ph, 50 Hz, 15/20 A, 6.3 kW, Becker vacuum pump, type: U 1.16 SA-31, year of construction: 1994, capacity: 16 m³/h, dimensions: 2100 mm x 1200 mm x 1950 mm.

bore capacity in steel (diameter): 16 mm throat: 185 mm bore stroke: 50 mm : 20 mm spindle taper: MK 2 spindle diameter: mm spindle turning speed range: 100-1500 / 200-3000 U/min : 175 mm : 280 mm table surface area: 500 x 180 mm connected load frequency: 230 V total power requirement: 0,85 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manter BV 10-heads linear weigher, machine code: DIS 30-240 and VP 10000, machine number: 203-1045 and 203-043, year of construction: 05-2003, machine weight: 175 kg and 1450 kg, plastic belt, belt width: 250 mm, 10000 liter, total dimensions: 2700 mm x 2300 mm x 2850 mm.

VEB mobile drum washer, machine number: 1204, 380 V, 50 Hz, , drum width: 470 mm, ø perforations: 10 mm, total dimensions: 1250 mm x 1100 mm x 1790 mm.

CVP Systems Inc atmospheric packaging machine, model: A200, seal length: 1500 mm, Busch vacuum pump, type: RA 0040 E 501, number: 02009205, capacity: 40 m³ per hour, total dimensions: 1610 mm x 970 mm x 1930 mm.

Copy Shaper / Copy Lathe Brand: Geiger Model: 8CD Milling + Grinding Workpiece length max. 1500mm

Bosch PKS vacuum packing machine for coffee Packed in 250 g and 500 g packages Year 1994 / renovated in 2017 Good working condition

CMT forming machine for mozzarella, dye: Ø 40 mm, Ø 20 mm, and 280 mm x 80 mm, total dimensions: 1250 mm x 950 mm x 1900 mm.

CMT forming machine, type: H4/2C, model: H4C-91-2379, year of construction: 1991, 6 kW, 4 heads, diameter: (4x) 120 mm, total dimensions: 2100 mm x 1550 mm 1810 mm.

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm table-size: 1300 x 600 mm max. workpiece weight: 2000 kg spindle taper ISO: 50 spindle turning speed - stepless: 30 - 3500 U/min feeds -stepless-: 1 - 6000 mm/min rapid traverse: 10 m/min power capacity - milling spindle: 18 kW max. torque on the spindle: 500 Nm distance work spindle /surface of the table: 267 - 867 mm distance table-vertical head: 58 - 658 mm voltage: 380 V / 50 Hz control voltage: 230 V total power requirement: 22 kW weight of the machine ca.: 6,5 t dimensions: 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, • coolant device, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I.M.A. butter portioning and packing machine, dimensions: 2500 mm x 1500 mm x 1200 mm.

I.M.A. butter portioning and packing machine, dimensions: 2500 mm x 1500 mm x 1850 mm.

The Diosna SP 160D mixer is suitable for every test. Reliability and German quality are the main advantages of Diosna mixers. Two-speed spiral dough mixer. The bowl and dough kneading organ are made of stainless steel. Technical data: - stainless steel base and spiral, - protective lid with safety switch, - max. flour quantity: 100 kg, - max. dough quantity: 160 kg, - 2 speeds; 2 timers, - electromechanical control panel, - automatic changeover from first to second speed, - reverse rotation for easy cleaning. Warranty on all parts - 6 months. Call and arrange a demonstration of the machine!

Those dough dividers and rounders allow you to make 30 identical products in 1 work cycle. The products can be cut into pieces or rounded - depending on your needs! Weight ranges: Fortuna 3: 32-80 g Fortuna 4: 40-110 g Both machines are available both in semi- and in full automat. If you have any questions, don't hesitate to contact me via phone, mail or whatsapp!

Handtmann vacuum filling machine with lifter for 200 liter meat bin, type: VF 830, serial number: 43287, year of construction: 2019, 200/575 V, 50/60 Hz, 7.2/17.3 A, 6 kW, Busch vacuum pump, dimensions: 2200 mm x 1500 mm x 2150 mm. Including crate with parts. Completely overhauled in August 2026 by Kalteks.

VEB drum washer, machine number: 1204, 380 V, 50 Hz, , drum width: 470 mm, ø perforations: 10 mm, total dimensions: 1250 mm x 1100 mm x 1790 mm.

Rheon VX is a series of stress free dividers, which can divide most of doughs - even extremely moist. From rye tin bread to italian ciabatta flat bread (see photos for examples and our test products). The machine has been fully renovated in 2020 and is ready for work! Weight range: One row: 100 - 2000 gr two rows: 30 - 1500 gr Length range: 75 - 999 mm Max. cutting speed per row: 20 cuts per minute. If you find the machine interesting, let me know via phone, mail or whatsapp!

Handtmann vacuum filling machine with lifter for 200 liters meat bin, type: VF 830, serial number: 40246, year of construction: 2017, 200/575 V, 50/60 Hz, 9.6/17.3 A, 8 kW, Busch vacuum pump, dimensions: 2200 mm x 1500 mm x 2150 mm. With spare parts.

Almac forming machine for mozzarella, model: F.CMT, serial number: 122/02, year of construction: 09/02, 400 V, 3 Ph, 50 Hz, 20 A, diameter mozzarella: 75 mm, total dimensions: 2600 mm x 1100 mm x 2150 mm.

Rheon KN-171 encrusting machine The new Cornucopia® KN-171 was designed to specialize in confectionery. Even more compact than former models, the KN-171 boasts versatility and adaptability. And the possibilities keep expanding. Flexible product weight, filling/dough ratio and length Description: Output: 1200~max. 6000 pcs./h At conveyor’s up and down mechanism: 3600 pcs./h (differs according to product weight), Capacity: max. 180 kg/h Product Length Range (cylindrical) no limitation Product Weight Range (spherical) 10~90 g Dimensions:1516x874x1360 mm. Call and make an appointment for the Machine show!

used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW