22706 offers chiron fz 15

maximum number of results exceeded > 1000
please refine your search

Category: 103 milling machines / CNC Universal Milling Machines
Latest update: 27.05.2020 No.: 145089795
approved
dealer
New in: 2001
used
Seller: country-de Detlef Jahn e. K.
Location: Deutschland

x-travel: 550 mm y-travel: 400 mm z-travel: 360 mm control: Sinumerik 840 D Main spindle:: Step-Tec turning speed range - main spindle: max. 20.000 min/-1 power capacity - main spindel: 14 / 9,5 kW max. Torque: 90 Nm tool taper: HSK A 63 work table:: table surface area: 1050 x 450 mm max. table load: 500 kg max. workpiecediameter: 280 mm max. workpiece height: 250 mm tool magazin:: number of toolpositions: 48 pos. max. tool diameter: 82 mm max. tool-dia with free toolbox: 125 mm max. tool weight: 5/10 kg change-time chip to chip: 2,4 sec feeds:: rapid traverse: 60 m/min Number of working hours: 34716 h total power requirement: 19 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,7 x 4,0 x 3,5 m Documents: ja Chip conveyor: ja Coolantsystem: ja paper band filter: ja elektr. hand wheel: ja fire distinguisher: ja oil mist filter: ja 5 axis CNC Machining Center Univers ...

Category: 103 milling machines / CNC Universal Milling Machines
Latest update: 27.05.2020 No.: 145089784
approved
dealer
New in: 2004
used
Seller: country-de Detlef Jahn e. K.
Location: Deutschland

x-travel: 550 mm y-travel: 400 mm z-travel: 360 mm control: Sinumerik 840 D Main spindle:: Kessler-Spindel turning speed range - main spindle: max. 20.000 min/-1 power capacity - main spindel: 14 / 9,5 kW max. Torque: 90 Nm tool taper: HSK A 63 work table:: table surface area: 1050 x 450 mm max. table load: 500 kg max. workpiecediameter: 280 mm max. workpiece height: 250 mm tool magazin:: number of toolpositions: 48 pos. max. tool diameter: 82 mm max. tool-dia with free toolbox: 125 mm max. tool weight: 5/10 kg change-time chip to chip: 2,4 sec feeds:: rapid traverse: 60 m/min Number of working hours: 33604 h total power requirement: 19 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,7 x 4,0 x 3,5 m Documents: ja Chip conveyor: ja Coolantsystem: ja paper band filter: ja elektr. hand wheel: ja fire distinguisher: ja oil mist filter: ja 5 axis CNC Machining Center  ...

Category: 103 milling machines / CNC Milling Centers
Latest update: 22.11.2019 No.: 143618430
approved
dealer
New in: 2001
used
Seller: country-dk DenTool LTD
Location: 0 Naestved

Bearing number: 3451 CNC-VERT. Processing Manufacturer: Chiron, Type: FZ 15W Machinen NR.: 145-35, built: 2001 Specifications: Longitudinal movement (X) 550 mm Transverse movement (Y) 400 mm Vertical movement (Z) 425 mm Spindle cone 40 ISO Spindle speeds 12000 rpm Spindle motor 9.5 - 14 Kw Tool changers/number stations 20 stations Rapid 40 m/min Control Fanuc 18i - M Fabr. Accessories: Controlled in axis 4 Palletten 2 stck Integrated pallets with turntable AWU 160 P Cooling water system. Chip promotion. High Speed package Weight: 7200 kg

Category: 101 boring mills and machining centers / Milling machine centers
Latest update: 11.05.2020 No.: 21651689
approved
dealer
New in: new
Seller: country-it Mimu Werkzeugmaschinen

Twin pallet vertical machining center Chiron FZ08W 15000 RPM Spindel Pallet changer FANUC 21 M X-300 Y-250 Z-250 X/Y = 40m/min Z = 60m/min Pallet: 2 x 550 x 300 Drilling in steel: 16 mm Milling in steel: 60 cm3/mn Threading in steel: M 12 Rigid tapping: SI Tools : 12 HSK-A32 Tool dia: 40 mm Tool length (max): 160 mm Distance table - spindle nose: 170-450 mm Swarf conveyor Under power in our warehouse Mimu Machine Tools (Italy) I-25064 Gussago BS Italy

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 146566401
New in: 2010
used
Seller: country-de Innovac GmbH
Location: Deutschland

X-travel: 550mm, y-travel: 400mm, z-travel: 360mm, rotational speed: 15,000/min, tool cone: HSK 50, number of tool slots: 64, controls: SIEMENS 840D, coolant container capacity: 1200l, operational hours: 39,500h, including chip conveyor, spindle changed in 2018.

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 11.05.2020 No.: 66814995
approved
dealer
New in: 1999
used
Seller: country-it Mimu Werkzeugmaschinen

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Category: 101 boring mills and machining centers
Latest update: 30.09.2019 No.: 141480982
approved
dealer
New in: 2001
used
Seller: country-it Industrialbay
Location: 23801 Calolziocorte, via serta 23

2001 Siemens CNC ROTOPALLET 20 tools 40 iso RPM 12000 Power 28 Kw 550x400x425 races pallet size 660x350 rapid 60 m / min High pressure through the spindle axis Quarto evacuator chips

Category: 101 boring mills and machining centers
Latest update: 23.06.2019 No.: 121679387
approved
dealer
New in: 2001
used
Seller: country-de Zölch GmbH & Co. KG
Location: D - Bayern
Price: 10.900 €

Built 2001 Siemens 810 Control 12 tool panels Tool change time chip-to-chip 2.9 s travel distance 550 x 300 x 425 distance spindle holder - table top 190 - 615 mm speed range 20 - 10000 rpm speed 40 m/min tool holder ISO 30. drilling capacity in ST60 - 20 mm weight approx. 3590 kg Zubehoer: Spaenefoerderer; div. Tool A visit under electricity is possible. ; Very good

Category: 101 boring mills and machining centers / Processing Centers
Latest update: 01.04.2020 No.: 145265695
approved
dealer
New in: 2001
used
Seller: country-de IDS Trade GmbH

BAZ Chiron FZ 12 KS BJ 2001 five axis high speed We currently have a machine which we have for sale. Is already dismantled, as we have installed a new machine here.

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 13.03.2020 No.: 145482788
approved
dealer
New in: 1987
used
Seller: country-de METEC GmbH

CNC machining center vertical Manufacturer: Chiron Type: FZ 12 S Built: 1987 Control: Siemens 810M Travel X/Y/Z axis: 550 x 300 x 280 mm Drilling capacity in ST: 20 mm Thread cutting: M16 Tool slots: 12 Tool holder: SK30 Speed range, infinitely variable: 20-7.100 rpm Rigid table clamping area: 950 x 370 mm Coolant device Machine Weight: 2.5 to

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 145093925
approved
dealer
New in: 1990
used
Seller: country-ch Gromag AG
Location: Grenzach-Wyhlen

x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm Control: Fanuc table surface area: 950x370 mm tool taper: SK 40 turning speed range - spindle: 10500 U/min total power requirement: kW weight of the machine ca.: 5,5 t CNC path control FAnuc electronic handwheel 4th axis rotary table chip conveyor automatic tool changer 12 times cooling device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 24.04.2020 No.: 146023735
approved
dealer
New in: 1999
used
Seller: country-de WMH24

Control Siemens Sinumerik 840D Shopmill Travel X / Y / Z: 550 x 300 x 425 mm Spindle speed 10,500 min-1 Tool magazine for 20 tools, SK 40

Category: 101 boring mills and machining centers / Processing Centers
Latest update: 27.05.2020 No.: 145089595
approved
dealer
New in: 2006
used
Seller: country-de Christoph Busch GmbH
Location: Glehn

Control: Siemens Sinumerik 840 x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm taper ISO: ISO40 toll turrets: 12 : weight of the machine ca.: 4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 205 boring mills, machining centers / Numerically Controlled Machining Centres
Latest update: 27.05.2020 No.: 145092925
approved
dealer
New in: 1988
used
Seller: country-de Markus Hirsch GmbH
Location: Willich

x-travel: 550 mm y-travel: 300 mm z-travel: 280 mm Control: Siemens type: 810 M spindle speed:: 20-7100 U/min Tool changer: Feed: 4000 mm/min table surface area: 870x550 mm total power requirement: 22 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,8x1,8x2,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 145091906
approved
dealer
New in: 1992
used
Seller: country-de KIRCHGEORG Werkzeugmaschinen GmbH
Location: Dreieich

x-travel: 750 mm y-travel: 520 mm z-travel: 630 mm CNC-control: SINUMERIK 810 M table-size: 1150 x 570 mm max. table load: 1200 kg spindle taper: SK 40 spindle turning speed range: 20 - 7100 U/min rapid traverse: 30 m/min drive capacity - spindle motor: 18 kW tool change unit: 20 Pos. coolant: voltage: 380 V total power requirement: 20 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 2,00 x 3,50 x 2,80 m - Serial No.: T2228092-92 - Control: SIEMENS Sinumerik 810 M - with 4th Axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 146566216
New in: 1991
used
Seller: country-de Innovac GmbH
Location: Deutschland

X-travel: 1600mm, y-travel: 400mm, z-travel: 425mm, spindle column/ table distance: 435/ 190-615mm, max. table load: 500kg, clamping surface: 1880x475mm, T-groove number/ width/ distance: 3/ 18/ 150mm, table height: 900mm, tool cone: SK 40, controls: SIEMENS SINUMERIK, the main spindle received new bearings in 2016.

Category: 101 boring mills and machining centers
Latest update: 14.08.2019 No.: 139170128
approved
dealer
New in: 2006
used
Seller: country-pl INTER-PLAST Andrzej Bodziachowski
Location: 42200 Czêstochowa, Meliorantów 67 A,B

CNC Machining Center CHIRON FZ 18L Built: 2006 Workspace: X- 2,600 mm Y- 520 mm Z- 630 mm Table: 3,000 x 500 mm Tool magazine: 20 pcs. Control: CNC Heidenhain Weight: 7,200 kg

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 04.11.2019 No.: 40096339
approved
dealer
New in: 1988
used
Seller: country-de Santos Werkzeugmaschinen

Article No. 200-668 Machining center vertical Make: Chiron Type: FZ 16 L Year of construction: 1988 Control: Siemens 3M 12 x tool changer, chip to Span 3.2 sec. Air-conditioned cabinet Chip conveyor Minimal quantity lubrication Werucon Pibomulti angle head various spare parts (second Control cabinet), used spindle, Axle motors, etc approx. 25 STK. SK30 recordings Technical details: X-axis: 5600mm Y-axis: 400mm z-axis: 425mm SK30 spindle recordings Spindle speed 7000 RPM Rapid feed 15 m / min Paltzbedarf: 9, 0 x 2, 8 x 2, 7m Weight: 8000kg

Category: 103 milling machines
Latest update: 26.05.2020 No.: 146562651
New in: 1996
used
Seller: Pagus Maschinenhandel
Location: Pagus NL. Jena Deutschland

x-travel:550 mm y-travel:300 mm z-travel:425 mm CNC-control:Sinumerik table-size:950 x 350 mm max. table load:500 kg spindle taper ISO:30 spindle turning speed range:20 - 10500 U/min spindle drive motor:5,5 kW tool change unit:12 Pos. coolant:inkl. voltage:380 V tool adaptor:Steilkegel 40 groove width:32/28 mm no. of flutes:3 rapid speed:40.000 mm/min total power requirement:15 kVA weight of the machine ca.:3,3 t chip conveyor:inkl. dimensions of the machine ca.:2000x 3000 x2500 mm Documents:vorhanden - Serial Number: 186 - 78 - Control: FANUC O-M - with various tool holders - coolant equipment

Category: 103 milling machines / Vertical Milling Machines
Latest update: 16.12.2019 No.: 144064348
New in: 1990
used
Seller: country-de Tavsit UG

Vertical machining center Chiron FZ 22 L 2200 Description Name: FZ 22 L 2200 176-73 Built: 1990 Control: Siemens Operating hours approx. 13,000 h Tool slots: 40 X- axis: 2200mm Y axis: 400 mm Z- Axis: 424 mm Pushthrough for long parts With Knoll chip conveyor Visit under electricity possible

Category: 101 boring mills and machining centers / Processing Centers
Latest update: 04.07.2019 No.: 137466975
approved
dealer
New in: 2005
used
Seller: country-de G+S Werkzeugmaschinen
Location: 82140 Olching, Gewerbering 6

Manufacturer: Chiron Model: FZ 18 S Highspeed Built: 2005 Control: Siemens 840D - Powerline Speed [rpm]: 12,000 Travel X/Y/Z [mm]: 800/520/630 Spindle: Speed: 12,000 rpm Tool holder: SK40 Tool magazine: Technology: Basket changer with 20 stations Tool length (max): 220 mm Tool-a (max.): 65 mm Tool weight (max.): 4 kg general: Clamping area: 1,400 x 570 mm Equipment / Accessories: Distance measuring system: Motor measuring system Chip management: chip conveyor Coolant management: ICZ system with filter, tank capacity 960 l Tool monitoring: buttons

Category: 101 boring mills and machining centers / Universal processing centres
Latest update: 14.10.2019 No.: 137836652
approved
dealer
New in: 1998
used
Seller: country-de WMH24
Location: 73563 Mögglingen, Serenwaldstr. 10

Control Fanuc 21M Travels X / Y / Z: 300 x 250 x 250 mm Spindle speed 15,000 rpm Tool magazine for 12 tools, HSK-A32 4-5th Axis Peiseler

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 18.12.2019 No.: 143246445
New in: 2002
used
Seller: country-si H&S machines

Corsa Asse x 300 mm Corsa Asse y 250 mm Corsa Asse Z 250 mm Potenza Totale 8 kW Peso della Macchina 2.6 t circa CNC FANUC 21 M Velocità Mandrino Fino a 10,500 giri/min Traversa Rapida Fino a 60 m System di Misurazione Utensili, controllo della Rottura utensile

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 14.10.2019 No.: 137836656
approved
dealer
New in: 2001
used
Seller: country-de WMH24
Location: 73563 Mögglingen, Serenwaldstr. 10

Control Fanuc 21M Travels X / Y / Z: 300 x 250 x 250 mm Spindle speed 15,000 rpm Tool magazine for 12 tools, HSK-A32 Pallet changer

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 17.02.2020 No.: 145047684
approved
dealer
New in: 1997
used
Seller: country-de WMH24
Location: 73563 Mögglingen

Control Fanuc 21M Travel X/Y/Z: 300 x 250 x 250 mm Clamping area 620 x 270 mm Spindle speed 15,000 rpm Tool magazine for 12 wks., HSK-A32

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 146562692
New in: 1997
used
Seller: S+B Maschinenhandelsgesellschaft mbH
Location: Karlsbad Ittersbach Halle 1

x-travel:2000 mm y-travel:520 mm z-travel:630 mm Table area:2.700 x 570 mm tool change unit:40 Pos. control:Siemens 840D tool taper:SK 50 bore capacity in St 60 - full boring:88 mm thread cutting up to max.:M 56 :in St 60: 1.200 cm³/min turning speed range - stepless:20-6000 1/min rapid travel x/y/z:40 / 30 / 30 mm/min main drive motor:38/20 kW total power requirement:50 kVA weight of the machine ca.:10 t machine dimensions LxWxH:4,45 x 2,85 x 2,8 m vertical machining center, two table machining with dividing wall 2x560mm, chipconveyor, internal coolant supply 20bar, flushgun, flushing of machine bed,

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 146562701
New in: 2010
used
Seller: S+B Maschinenhandelsgesellschaft mbH
Location: Karlsbad Ittersbach Halle 1

x-travel:550 mm y-travel:400 mm z-travel:360 mm control:SIEMENS 840D tool taper:HSK 50 tool change unit:64 Pos. turning speed range - stepless:15.000 1/min total power requirement:51 kVA weight of the machine ca.:6,5 t 5-axis simultaneously machining center, NC-rotary-swivelling table, machine protection system BRANKAMP CMS 100, coolant box 1200 l (vaccum filter for cleaning of coolant ICS max. 70bar, chipconveyor throw-off height 1050mm, pneumatic device for vaccum-clamping in working area, incl. zero point clamping system, approx. 100 pcs. toolholders type HSK 50, in 2018 exchange of milling spindle and X-guideways approx. 40.500 working hours

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 146571674
New in: 2013
used
Seller: country-de Surplex GmbH
Location: Deutschland, 82140 Olching
Price: used machinery auction RESALE 19.500 €

Weight approx.: 9200 kg Dimensions (l x w x h) approx.: 4000 x 4000 x 2900 mm Description: Serial no. 322-48 Control System: Siemens 840D Spindle speed: 10.500 Movement [in mm]: 730/550/630 Spindle: Speed: 10.500 rpm Power approx.: 34 kW Torque approx.: 200 Nm Taper: SK40 In general: Tool magazine: Basket changer, 20 stations Clamping surface approx.: 1.070 x 440 mm Equipment / Accessories: Position sensor: Direct scales Chip management: Chip conveyor Work piece measuring: Touchprobe, Renishaw OMP 40-2LS Cooling management: Internal cooling unit with paperbeltfilter Work piece clamping: Preparation Hydraulic clamping Oilmist seperator: Preparation Extraction Additional accessorie: Signal lamp ATTENTION: The Toolholders shown are not included in the offer! Further technical Details according to photos and video! The machine could be inspected under power!

Category: 101 boring mills and machining centers / Processing Centers
Latest update: 13.02.2020 No.: 144766620
approved
dealer
New in: 2001
used
Seller: country-de KW Maschinen GmbH

Year of constuction: 2001 Control /control:Fanuc Series 18i-M Travel X: 300 mm Travel Y: 250 mm Feed force X-/Y axis: 2000 N Travel Z: 250 mm Feed force Z-axis: 3000 N Rapid speed X/Y axis: 40 m/min Rapid speed Z-axis: 60 m/min Spindle drive: 7.4 kW Spindle speed: 20-15,000 rpm max. Torque: 23 Nm Tool slots: 24 chain magazine Tool voltage: 4500 N Tool holder DIN69893: HSK-A32 Drilling capacity in St60: 16 mm Thread cutting: M12 Accessories: chip conveyor, coolant pump with 100l container capacity, automation / loading arm from Schuster, change table Space requirement LxWxH: 4,017m x 1,930 x 2,150m Weight approx.: 2.2 to.

Category: 101 boring mills and machining centers
Latest update: 23.06.2019 No.: 90778525
approved
dealer
New in: 2000
used
Seller: country-de Zölch GmbH & Co. KG
Location: D - Bayern
Price: 15.000 €

year 2000 Siemens 810 control 12 tool places Tool change time chip-to-chip 2.9 s travel 550 x 300 x 425 distance spindle holder - table top 190 - 615 mm speed range 20 - 10500 rpm express speed 40 m/min 2 clamping flaps 660 x 350 mm tool holder BT 30. drilling capacity in ST60 - 20 mm weight approx. 4000kg spindle hour tamper unfortunately not available. switching hours: 70,000 Zubehoer: Spaenefoerderer A visit under electricity is welcome; ready for use

Category: 101 boring mills and machining centers
Latest update: 10.05.2018 No.: 90778526
approved
dealer
New in: 2000
used
Seller: country-de Zölch GmbH & Co. KG
Location: D - Bayern
Price: 15.000 €

; Operational

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 146572702
New in: used
Seller: country-de Surplex GmbH
Location: Deutschland, 73450 Neresheim
Price: used machinery auction RESALE 1.000 €

Weight approx.: 4500 kg control: SIEMENS SINUMERIK Dimensions (l x w x h) approx.: 3500 x 2000 x 2700 mm Description: CHIRON FZ 18 W 3-Axis Vertical Machining Centre - incl. chip conveyor KNOLL, type 350-K-1, YOM 1991

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 01.05.2020 No.: 146218912
approved
dealer
New in: 1996
used
Seller: country-de WMH24

Control Siemens Sinumerik 810M Travel X/Y/Z: 550 x 300 x 425 mm Spindle speed 10,500 rpm Tool magazine for 20 Wkz., SK 40 4./5. Axis Cooling trough the spindle

Category: 101 boring mills and machining centers
Latest update: 17.02.2020 No.: 145077152
New in: 1990
used
Seller: country-de Gerd Seidler Werkzeugmaschinen
Location: Werk

x-travel: 2200 mm y-travel: 520 mm z-travel: 425 mm Control: SIMENS Sinumerik 810M tool taper: SK 40 turning speeds: 6000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 17.02.2020 No.: 145077153
New in: 1989
used
Seller: country-de Gerd Seidler Werkzeugmaschinen
Location: Werk

x-travel: 1600 mm y-travel: 520 mm z-travel: 425 mm Control: SIMENS Sinumerik 810M tool taper: SK 40 turning speeds: 6000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 26.05.2020 No.: 145132969
approved
dealer
New in: 1997
used
Seller: country-cz KAXIMA International, s.r.o.
Location: 59101 Zdar nad Sazavou

Year of production: 1997 Control system: Siemens Sinumerik Travel X-axis: 550 mm Travel Y-axis: 300 mm Travel Z-axis: 425 mm Speed: 10 500 rpm Weight: 4 000 kg

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 11.05.2020 No.: 139419052
approved
dealer
New in: 2008
used
Seller: country-it Mimu Werkzeugmaschinen

Chiron FZ12K W HS vertical machining center with Rotopallet Version High speed 48 Tools Y = 400 mm Axe X = 550 mm Axe Z = 360 mm CN SIEMENS 840 D HSK 50 15 000 tr/min Filter system

Category: 101 boring mills and machining centers
Latest update: 26.05.2020 No.: 146565551
New in: 2003
used
Seller: country-de Innovac GmbH
Location: Deutschland

Number of tool slots: 42, hollow taper: HSK 63A, tool mount: SK 40, max. tool length: 280mm, tool diameter: 78-160mm, tool weight: 5-8kg, compressed air supply: 5.5bar, compressed air consumption: 1000Nl/min, control: SIEMENS SINUMERIK 840d, including chip conveyor, 2 rotary axis PEISELER AWUP 160, high pressure plant and drum filter KNOLL, tool changer is in need of repair.

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 145095091
approved
dealer
New in: 2003
used
Seller: country-de STEINHAND GmbH
Location: Lager Düsseldorf

travel -x axis: 830 mm travel -y axis: 550 mm travel -z axis: 630 mm control: Siemens - Sinumerik Automatic tool changer: 20 Stk. tool taper: SK40 Spindle speed max.: 16.000 min -1 3-axis Machining Center equipped with ITC. - Additional control BDE Engineering for processing time recording The machine has exclusively processed aluminum. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ18S | FZ18 S | 18S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 146571700
New in: 2005
used
Seller: country-de Surplex GmbH
Location: Deutschland, 84453 Mühldorf am Inn.
Price: used machinery auction RESALE 9.500 €

Weight approx.: 6000 kg Dimensions (l x w x h) approx.: 4500 x 4500 x 3200 mm Description: Control System: Siemens 840D - Powerline Spindle speed: 12.000 Movement [in mm]: 800/520/630 Spindle: Speed: 12.000 rpm Taper: SK40 Tool magazine: Technology: Basket changer with 20 stations Tool length (max.): 220 mm Tool-ø (max.): 65 mm Toolweight (max.): 4 kg In general: Clamping surface: 1.400 x 570 mm Equipment / Accessories: Positionsensor: Motormeasuring system Chip management: Chip conveyor Cooling management: Internal cooling unit with filter, tank 960 l Tool monitoring: Touch probe Further technical Details according to pdf, photos and Videos! The machine is stored in the meantime and not under power anymore!

Category: 101 boring mills and machining centers / Processing Centers
Latest update: 27.05.2020 No.: 145088440
approved
dealer
New in: 2000
used
Seller: country-de AS Maschinenhandel
Location: Lager Monheim

x-travel: 300 mm y-travel: 250 mm z-travel: 250 mm Control: GE Fanuc Series 21i-M tool taper: HSK-A32 surface area: 2 x 550 x 300 mm turning speeds: 20-15000 U/min total power requirement: kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 145095097
approved
dealer
New in: 2004
used
Seller: country-de STEINHAND GmbH
Location: Lager Düsseldorf

travel -x axis: 830 mm travel -y axis: 550 mm travel -z axis: 630 mm Control: Siemens - Sinumerik Automatic tool changer: 20 Stk. tool taper: SK40 Spindle speed max.: 16.000 min -1 3-axis Machining Center equipped with ITC. - Additional control BDE Engineering for processing time recording The machine has exclusively processed aluminum. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ18S | FZ18 S | 18S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 11.01.2019 No.: 131123390
approved
dealer
New in: 1997
used
Seller: country-de CNC BOTE Johann Demmel
Location: 86971 Peiting, Zechenstr. 10

Year of construction 1997 Steueurung Fanuc 21-M Traverse paths x 300 mm Y 250 mm Z 250 mm Rapid traverse X, Y 40 m / min Z 60 m / min Main spindle 20-15,000 rpm Tool holder HSK32 Tool changer 12 Pocket Weight 2.200 kg

Category: 103 milling machines / CNC Milling Centers
Latest update: 28.11.2019 No.: 143764671
approved
dealer
New in: 1996
used
Seller: country-de GINDUMAC GmbH
Location: 67663 Kaiserslautern, Trippstadter Str.

OVERVIEW Brand: CHIRON Model: FZ 22 L Application Type: Milling Machine Type: Machining centers (vertical) Availability: Immediately Production Year: 1996 Location: Germany Origin Country: Germany Production Hours: 21836 GENERAL DATA Machine weight: 7200 kg CONTROL UNIT Brand: Siemens Model: Sinumeric 810M MAIN DRIVE Spindle speed range: 7100 rpm MOVEMENT X-Axis Movement: 2000 mm Y-Axis Movement: 520 mm Z-Axis Movement: 425 mm TOOLS Slots in storage: 20 Type of tool holder: SK40 See full technical specifications of this machine at: http://bit.ly/2q0tp4j

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 11.05.2020 No.: 123817412
approved
dealer
New in: new
Seller: country-it Mimu Werkzeugmaschinen

FZ15KS HIGH SPEED 4 axis vertical machining center X: 550mm Y: 400mm Z: 360mm 4th axis original Peiseler CNC Siemens 840D Table surface 1050 x 450mm Toolchanger 48 posts ISO 40 Spindle speeds up to 12000 1/min with 4th axis Renishaw broken tool detector Coolant through spindle swarf conveyor Can be inspected under power in our warehouse. Mimu machine tools (Italy)

Category: 101 boring mills and machining centers / Vertical Processing Centers
Latest update: 15.02.2018 No.: 123748037
approved
dealer
New in: used
Seller: country-it Mimu Werkzeugmaschinen
Location: Gussago

Chiron Fz08W 4 axis rotopallet 4 Achsen CNC Fanuc 21m Spindel motor 3,7kW 20 - 15000 RPM Machine can be inspected and tested under power in our warehouse in Gussago BS Mimu machine tools

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 11.05.2020 No.: 80512457
approved
dealer
New in: new
Seller: country-it Mimu Werkzeugmaschinen

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0M1995Can be inspected under power in our warehouse.Mimu Machine tools Italy

Category: 103 milling machines / CNC Milling Centers
Latest update: 08.10.2019 No.: 141864909
New in: used
Seller: country-de Blikle Werkzeugmaschinen
Location: 78564 Reichenbach am Heuberg, Franz-Herm

1 x vertical machining center Chiron FZ 22 W high speed Built: 1999 Control: Siemens 810 GA 3 with 4 - axis Peiseler automatic part table Peiseler Spaenekratzfoerderer with filter system Knoll wek tool changer (chain) Technical data: Travel routes: X 630 Y:400 Z: 425 mm Feed X/Y/Z: 1 - 4,000 mm/min Rapid speed X/Y/Z: 20 m/min Spindle: Spindle speed: 40 - 10,500 rpm Tool holder: SK 40 Spindle drive: 18 KW Tool changer: Tool places: 40 Switching time: 1.5 sec. Chip to Chip: 3.5 sec. Changing table: Table size: 850 x 1,250 mm Table load: 500 kg (250 kg per side) Switching time: 4 sec. 9brmzwoq8 4 - Axis: Max.possible plan disc speed: 12 m - 1 Transport load: 280 Kg Circuit: 0.01 Plan run: 0.01 Partial accuracy from screw drive: +/- 10 sec. Accessories: 2 x SK 40 recording as a pattern complete documentation

Category: 101 boring mills and machining centers
Latest update: 27.05.2020 No.: 145090258
approved
dealer
New in: 1999
used
Seller: country-de Franz Hoppe GmbH
Location: Lager Korschenbroich

x-travel: 550 mm y-travel: 300 mm z-travel: 425 mm table surface area: 2 x 660 x 350 mm spindle taper ISO: 40 rapid motion -longitudinal/cross/vertical: 40 m/min spindle motor: 14 kW total power requirement: 21 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3 x 2,3 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines / Milling Machines
Latest update: 01.04.2020 No.: 143157715
approved
dealer
New in: used
Seller: country-de IDS Trade GmbH

Milling machine Chiron FZ12 S

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)