chin fan used for sale

This 5-axis FANUC ROBOCUT α-1iA was manufactured in 2000. It features a stroke of 520 mm on the X-axis, 370 mm on the Y-axis, and 310 mm on the Z-axis, providing versatile machining capabilities. The machine has a permissible mass of workpiece up to 1000 kg, making it suitable for various applications. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT α-1iA machine we have for sale. Contact us for further details.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

6-axis industrial robot for handling components with a payload capacity of up to 25 kg. Designed in IP67 protection class, suitable for demanding environmental conditions and compliant with ISO Class 5 cleanroom requirements. Incl. separate control cabinet for each robot. 2 identical robots available.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 -Type: A20B-2002-052 MES-1A -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Fanuc, AC Spindle Motor from Santenberg GTC S 2 CNC machining center -Type: A06B-1448-B200 -Technical data: see photo of the nameplate -Shaft: Ø 48 x 110 mm -Dimensions: 535/290/H335 mm -Weight: 100 kg

Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.

Permanent magnet motor, electric motor, servo motor, DC motor, stepper motor, spindle motor, AC servo motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B000 -Shaft: Ø 18/13 x 30 mm -Technical data: see photo of the nameplate -Number: 2x servo motors available -Price: per piece -Dimensions: 280/130/H165 mm -Weight: 12.9 kg/pc.

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - / Contact us at -

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor, Spindle Motor, Permanent Magnet AC Servo Motor, AC Spindle Motor, AC Servo Motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B300 -Power: 1.6 kW 3000 rpm -Shaft: Ø 16/13 x 30 mm -Techn. Data: see photo type plate -Number: 2x servomotors available -Price per piece -Dimensions: 280/130/H165 mm -Weight: 15.2 kg/pc.

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet AC Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC spindle motor from CNC machining center Santenberg GTC S 2 -Type: A06B-1448-B100 -Techn. Data: see photo type plate -Shaft: Ø 48 x 110 mm -Dimensions: 580/500/H310 mm -Weight: 127 kg

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat temperature switch, unused, original packaging -Type: TBFR 112 spec. -Temperature range: 18 to 55 °C -Cardboard dimensions: 220/120/H50 mm -Weight: 0.5 kg

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Unit, Control Panel, Keyboard, Control Panel Teach Pendant -Manufacturer: Fanuc, Operator Panel -Type: Oi-TD -MDI Unit: A02B-0319-C125 -Interface: A02B-0319-B500 -Operator Panel: A02B-0319-C243 -Individual components: see photos -Submission/Price: complete -Transport dimensions: 1340/900/H390 mm -Weight: 64 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-1513-B200 -Power: 26 to 45 kW -Speed: 1500 to 6000 rpm -Technical data: see photo type plate -Shaft: Ø 60 x 140 mm -Dimensions: 880/320/H410 mm -Weight: 286 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B400 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 360/175/280 mm -Weight: 30 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B100 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 320/175/280 mm -Weight: 23 kg

DC spindle motor, electric motor, DC motor, servo motor -Power: 11.5/18.5 kW -Speed: 1160/3500 rpm -220 V -79/96 A -Speedometer: 6V/krpm -Shaft: Ø 50 mm -Design: B3 -Additional cooling -Dimensions: 910/340/H400 mm -Weight: 200 kg

DICER MACHINE, FAM TYPE YURAN Technical description: FAM, Type YURAN. Serial number: 6162 400 V, 3 Ph, 50 Hz, 4 kW Weight: 600 kg, Belt: plastic belt, belt width: 270 mm, working width: 220 mm 28 knives, distance between knives: 8 mm Total dimensions: 2700 mm x 850 mm x 1450 mm

FANUC M-710iC/12L robotic welding station was built in 2014 in Japan by Fanuc Corporation. All components of the welding station are brand new. It has never been in operation after purchase. The FANUC M-710iC/12L is a state-of-the-art welding system designed for automated arc welding of structural components with even the most complex geometries. The machining process is performed by a FANUC 6-axis robot, distinguished by, among others, its clever design and robust arm with a large range of movement. The arm’s reach of 3323 mm and a payload of 12 kg enable the welding of complex workpieces, while maintaining a highly dynamic and repeatable process. Directly on the machine body, a reliable LINCOLN ELECTRIC wire feeder is placed, which ensures dynamic and accurate feeding of the welding wire. The welding torch, in turn, is automatically cleaned at predetermined intervals by the ABICOR ...

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Used Robot Palletizer FANUC 10800 bph General Description of the Robot The Used Robot Palletizer FANUC 10800 bph is a high-performance industrial robotic unit specifically designed for automated palletizing operations in bottling plants. The configuration combines the FANUC R-2000iC/165F robot and the R-30iB Plus controller. As a result, the system ensures excellent reliability, mechanical robustness, and positioning accuracy in high-intensity production environments. Operational Capacity and Mechanical Configuration Equipped with a six-axis articulated arm, the Used Robot Palletizer FANUC 10800 bph delivers ±0.05 mm repeatability, in full compliance with ISO 9283 standards. Furthermore, it achieves a maximum reach of 2655 mm and supports payloads of up to 165 kg at the wrist. Thanks to its rotating arm design, the system executes palletizing cycles with high precision. In particular, ...

Used Robot Depalletizer Fanuc 2003 – The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations? Look no further than the 2003 Fanuc Robot Depalletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and an available base, this depalletizer is designed specifically for depalletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can depalletize products up to a height of almost 2.7 meters. The integrated base and controller in the pedestal (or the available ...

Used Robot Palletizer Fanuc 2003 – The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations? Look no further than the 2003 Fanuc Robot Palletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and available base, this palletizer is designed specifically for palletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can develop pallets up to a height of almost 3 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) ...

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

x-travel:500 mm y-travel:400 mm z-travel:330 mm control:FANUC 31i B5 tool change unit:21 fach rapid traverse in x-y-z axis:54 m/min taper ISO:BT 30 turning speed range::10.000 1 / min spindle drive:11 / 3,7 kW max. table load:300 kg surface area:600x 400 mm Dimensions (L/W/H):1,6 x 2,1 x 2,25 m rapid traverse:48 m/min total power requirement:11 kVA weight of the machine ca.:2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

Fanuc ROBOSHOT α-S30iB (2023) Model: FANUC ROBOSHOT α-S30iB Clamping Force: 300 kN Max. / Min. Mold Height: 330 mm / 150 mm Tie Bar Distance (HxV): 310 x 290 mm Platen Diameter: Ø 100 mm Injection Speed: 600 mm/s Screw Diameter: 22 mm Screw Volume: 11 ccm Resin Compatibility: Glass fiber content up to 30% Machine Type: Fully Electric Injection Molding Machine

General SKU215W150 LocationBarneveld CEcheck MakeFansider Main Features Motor1.1 KW Length2100 mm Inlet diameter160 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Horizontal conveyor screwcheck Tube-typecheck Diameter160 mm Length2100 mm Between inlet and outlet1510 mm Shaft diameter90 mm Pitch100 mm Inlet580 x 160 mm OutletDia. 160 mm Motor1,1 kW, 400V, 1435 rpm Screw speed23 rpm Information TypeCT168 Mach.No.21443 Year of construction2022 Floorspace3,45 x 0,80 m Total height0,40 m Weight410 kg Extra SpecificationsCap. Approx 1800 l/hHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes &  ...

We have 6 Hongyuan HY-6 texturizing machines for sale,V-type,manufacture year:2011,240 spindles,with airjets,unitens,pneumatic yarn feeders PU discs,godets drawing,same like Barmag EFK texturizing machine..still working now.Very good condition.Sirous buyers contactus,please. We have many brands, models, years texturing machines, tell me what you need seriously!

0.77:1 VPR Lens SANYO-CHINA YF-W21B Auction-ID: A1-44225-241

0.77:1 VPR Lens SANYO-CHINA YF-W21B Auction-ID: A1-44225-240

0.77:1 VPR Lens SANYO-CHINA YF-W21B Auction-ID: A1-44225-242

Centrifugal fan REITZ type MAE 045-017030-00Fabr. No. 601438 year of construction 2017Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³Air inlet 300 mm (nozzle diameter in the base plate)Air outlet 345 x 345 mmEngine speed 2940 rpm. Motor power 18.5 kWNet connection 400 Volt 50 Hz- fan wheel with 8 fan blades- directly flanged drive motor- flange dimensions for air outlet 450 x 450 mm- stable metal housing made of 8 mm steelSpace requirement L x W x H 1930 x 1240 x 950 mmWeight

Centrifugal fan REITZ type: MAE 031-007130-00Fabr. No. 601475 year of construction 2017Volume flow 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³Air inlet 250 mm (nozzle diameter in the base plate)Air outlet 245 x 195 mmMotor speed 2915 rpm. Motor power 7.5 kWNetz connection 400 Volt 50 Hz- fan wheel with 9 fan blades- directly flanged drive motor- flange dimensions for air outlet 310 x 260 mm- stable metal housing made of 5 and 6 mm steelSpace requirement L x W x H 1390 x 1030 x 600

Centrifugal fan KASTRUPFabr. No. 27688/1 Year of construction approx. 1985Volume flow approx. 4000 m3/hIntake pipe 250 mmExhaust air connection 400 x 120 mmEngine speed 1440 rpmEngine power 5.5 kWNee connection 380 volts, 50 Hz.- Metal housingSpace requirement L x W x H 1100 x 900 x 1220 mmWeight approx. 150 kgGood condition; used

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized

Type: Centrifugal fan for dust extraction systems Electrical supply: 380V Motor power: 2 †7.5 kW Transmission: Belt and pulley drive; electrical cabinet not included Auction-ID: A7-44526-17

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€

Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used

Suction blowers 11 kW approx. 1200 mm direct drive

complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum  ...

Fans 500 to 28,000 m3/h Sales prices: € 100,- per 1000 m3/h so a fan with 5000 m3/h costs € 500,- plus VAT. We have fans for painting booths, suction walls, drying booths, paint storage rooms and other applications in stock. Please ask us. For painting systems we have complete units, luminaires, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

ABEGG Ventilatore ZIEHL. noch nie benutzt NEW 4 PCs.