chin fan used for sale

This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

This 6-axis FANUC R-2000iC 165F robot arm was manufactured in 2019. It features a maximum reach of 2655 mm and can handle wrist weights up to 165 kg. The robots footprint is 771 x 610 mm, and it operates on a 380-575V, 3-phase electrical system. Consider the opportunity to buy this FANUC R-2000iC 165F robot arm. Contact us for more information about this machine.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 -Type: A20B-2002-052 MES-1A -Extension module: Type: A03B-0815-C001 4 pcs. -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Fanuc, AC Spindle Motor from Santenberg GTC S 2 CNC machining center -Type: A06B-1448-B200 -Technical data: see photo of the nameplate -Shaft: Ø 48 x 110 mm -Dimensions: 535/290/H335 mm -Weight: 100 kg

Permanent magnet motor, electric motor, servo motor, DC motor, stepper motor, spindle motor, AC servo motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B000 -Shaft: Ø 18/13 x 30 mm -Technical data: see photo of the nameplate -Number: 2x servo motors available -Price: per piece -Dimensions: 280/130/H165 mm -Weight: 12.9 kg/pc.

For sale is a Fanuc control panel Type AO5B-2301-C375 Fully functional Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor, Spindle Motor, Permanent Magnet AC Servo Motor, AC Spindle Motor, AC Servo Motor -Manufacturer: Fanuc, AC servo motor with brake from CNC machining center Santenberg GTC S 2 -Type: A06B-0227-B300 -Power: 1.6 kW 3000 rpm -Shaft: Ø 16/13 x 30 mm -Techn. Data: see photo type plate -Number: 2x servomotors available -Price per piece -Dimensions: 280/130/H165 mm -Weight: 15.2 kg/pc.

CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg

Fanuc LR Mate 200iD/7L. Key Model Identification - Manufacturer: Fanuc - Series: LR Mate 200iD - Specific Model: LR Mate 200iD/7L (The "L" suffix denotes the "Long Arm" version, which matches the 911 mm reach). - Haas Designation: Robot Package 1 (or HRP-1). Matching Specifications from your PDF: - Payload: 7 kg (Matches the "7" in the model name). - Reach: 911 mm (Specific to the "7L" long-arm version; the standard 200iD/7 has a shorter reach of 717 mm). - Axes: 6 (Articulated arm). - Repeatability: 0.010 mm (Standard for this Fanuc series). - Weight: 27 kg (Matches the mechanical weight of the LR Mate 200iD/7L unit). Find more here - / Contact us at -

This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information.

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet AC Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC spindle motor from CNC machining center Santenberg GTC S 2 -Type: A06B-1448-B100 -Techn. Data: see photo type plate -Shaft: Ø 48 x 110 mm -Dimensions: 580/500/H310 mm -Weight: 127 kg

This 6-axis FANUC M-10iA / 8L robot arm was manufactured in 2018. It features a maximum reach of 2032 mm, a sound power level of 57.4 dB, and operates within an ambient temperature range of 0-45°C. The robot includes an R-30iB Plus controller and supports a maximum wrist load of 8 kg. Consider the opportunity to buy this FANUC M-10iA / 8L robot arm. Contact us for more information about this machine.

This 6s FANUC M20IA robot arm was manufactured in 2020. It features a maximum payload of 20 kg and a reach of 1,811 mm, making it suitable for various applications. With its versatile mounting options and robust protection ratings, consider the opportunity to buy this FANUC M20IA robot arm. Contact us for further details.

1.0 St. gebr. Robots Manufacturer: FANUC Series: M-10iA/10MS Type: A05B-1221-B902 Year of manufacture: 2018 Max. reach: 1,441 mm Lifting weight: 12 kg The design is food-safe. At present, the robot is installed in a production cell. You can purchase the robot with or without a production cell. The robot was only in use for one year.

1.0 St. gebr. Robots Manufacturer: FANUC Series: M-10iA/10MS Type: A05B-1221-B902 Year of Make: 2019 Max. reach: 1,441 mm Lifting weight: 12 kg The design is food-safe. At present, the robot is installed in a production cell. You can purchase the robot with or without a production cell. The robot was only in use for one year.

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

6-axis industrial robot for handling components with a payload capacity of up to 25 kg. Designed in IP67 protection class, suitable for demanding environmental conditions and compliant with ISO Class 5 cleanroom requirements. Incl. separate control cabinet for each robot. 2 identical robots available.

Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - / Contact us at -

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat temperature switch, unused, original packaging -Type: TBFR 112 spec. -Temperature range: 18 to 55 °C -Cardboard dimensions: 220/120/H50 mm -Weight: 0.5 kg

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Unit, Control Panel, Keyboard, Control Panel Teach Pendant -Manufacturer: Fanuc, Operator Panel -Type: Oi-TD -MDI Unit: A02B-0319-C125 -Interface: A02B-0319-B500 -Operator Panel: A02B-0319-C243 -Individual components: see photos -Submission/Price: complete -Transport dimensions: 1340/900/H390 mm -Weight: 64 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-1513-B200 -Power: 26 to 45 kW -Speed: 1500 to 6000 rpm -Technical data: see photo type plate -Shaft: Ø 60 x 140 mm -Dimensions: 880/320/H410 mm -Weight: 286 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B400 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 360/175/280 mm -Weight: 30 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B100 -Power: 5.5 kW -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 320/175/280 mm -Weight: 23 kg

DC spindle motor, electric motor, DC motor, servo motor -Power: 11.5/18.5 kW -Speed: 1160/3500 rpm -220 V -79/96 A -Speedometer: 6V/krpm -Shaft: Ø 50 mm -Design: B3 -Additional cooling -Dimensions: 910/340/H400 mm -Weight: 200 kg

DICER MACHINE, FAM TYPE YURAN Technical description: FAM, Type YURAN. Serial number: 6162 400 V, 3 Ph, 50 Hz, 4 kW Weight: 600 kg, Belt: plastic belt, belt width: 270 mm, working width: 220 mm 28 knives, distance between knives: 8 mm Total dimensions: 2700 mm x 850 mm x 1450 mm

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

FANUC M-710iC/12L robotic welding station was built in 2014 in Japan by Fanuc Corporation. All components of the welding station are brand new. It has never been in operation after purchase. The FANUC M-710iC/12L is a state-of-the-art welding system designed for automated arc welding of structural components with even the most complex geometries. The machining process is performed by a FANUC 6-axis robot, distinguished by, among others, its clever design and robust arm with a large range of movement. The arm’s reach of 3323 mm and a payload of 12 kg enable the welding of complex workpieces, while maintaining a highly dynamic and repeatable process. Directly on the machine body, a reliable LINCOLN ELECTRIC wire feeder is placed, which ensures dynamic and accurate feeding of the welding wire. The welding torch, in turn, is automatically cleaned at predetermined intervals by the ABICOR ...

Model: M-10iA/6L Serial Number: R11Y01899 Year of manufacture: 2011 Load capacity: 6 kg Reach: 1630 mm Number of axles: 6 Weight: 135 kg

This 5-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X, Y, and Z travels of 700 mm, 400 mm, and 330 mm respectively, along with a spindle speed of 24,000 rpm. The machine offers a maximum feed rate of 54,000 mm/min and can accommodate a workpiece diameter of up to 300 mm on a 5-axis table. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for more information about this machine.

This 4-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine is capable of a spindle speed of 24,000 rpm and a maximum feed rate of 54,000 mm/min. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for further details.

This 6-axis FANUC M-20iA robot arm was manufactured in 2015. It features a maximum payload of 20 kg and an impressive reach of 1,811 mm. The robot can be mounted in various configurations, including floor, ceiling (inverted), and angle mounting. If you are looking to get high-quality automation capabilities, consider the FANUC M-20iA robot arm we have for sale. Contact us for further details.

This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-speed spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details.

Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: piecesﻠ...

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - / Contact us at -

Fanuc M-2iA/3SLYear of manuf. : 2021 Control : Fanuc R-30iB Mate Plus ____________Description:In General:Number of axes:4Repeatability:+/- 0.1 mmWorking range:1,130 x 400 mmMaximum wrist weight:3 kgController:Fanuc R-30iB PlusRemote Controll:iPendant Touch

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm total power requirement: kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 palletizing robot 6-axis robot, for payloads up to 165 g, set to Euro pallet dimensions, robot reach 2655 mm, The robot is energized due to programming, installation dimensions 771 x 610 mm, average power 2.5 kW, electrical voltage 380 - 575 V, mechanical protection IP54, wrist and arm protection IP67 The plant was shut down in 2024. Roller conveyor and feed conveyor belt can be purchased for an extra charge

Manufacturer: Matra Model: Type FANUC A04 Type: Wire EDM Control System: Fanuc Year of Manufacture: 2001 Find more here - / Contact us at -

Manufacturer: Matra Model: Type FANUC A04 B Type: Wire EDM Control System: Fanuc Year of Manufacture: 2002 Find more here - / Contact us at -

Manufacturer: Matra Model: Type FANUC A04 B Type: Wire EDM Control System: Fanuc Year of Manufacture: 2000 Find more here - / Contact us at -

Robot Fanuc M710iC/20L , R30iA complete Year of manufacture: 6/2012 Control: R30iA Number of Axes: 6 Max. Payload: 20 kg max. Working range: approx. 3110 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Fanuc LR Mate 200iC/5L R30iA Robot Control: R30iA Year of manufacture: 11/07 Number of axes: 6 Max. load capacity: 5kg Max. working range: approx. 892 mm Scope of delivery: robot, controller, scope of delivery, cable, teach panel In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M710iC/50, R30iA complete Year of manufacture: 7/2006 Control: R30iA Number of axes: 6 Max. load capacity: 50 kg Max. working range: approx. 2050 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Number of axes: 6 Max. load capacity: 7Kg Max. working range: approx. 1633 mm Year of Make: 2016 Table surface each 750x500mm Total dimensions: approx. 2500x1500x2200 Total weight: approx. 2000kg In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Robot Fanuc M20iA , R30iA complete Year of manufacture: 8/2012 Control: R30iA Number of axes: 6 Max. load capacity: 20 kg Max. working range: approx. 1811 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Roboter Fanuc Robot LR Mate 200iC Robot Controller R-30iA Mate Year of Make: 2011 Scope of delivery: Robot LR Mate 200iC Type A05B-1139-B204 I Pendant A05B-2518-C202#EGN Fanuc System R-30iA Mate Type A05B-2553-B061 Cables In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.