chin fan used for sale

Centrifugal fan, centrifugal fan, centrifugal fan UTENTRA U/AP 35 motor: 2.2 kW 2800 rpm 230 / 400 V New ! Dimensions: 650 x 550 x 650 mm

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Centrifugal fan, centrifugal fan, centrifugal fan AC MOTORS FBA63B - 2 n: 2715 rpm motor : 0.25 kW 220 / 380 V IP55 with airflow monitoring ! Dimensions: 310 x 230 x 220 mm

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.62 kW -Volume output: approx. 45 m3 / min -Connection air duct: 285 x 140 mm -Number: 2x fans available -Price per piece -Dimensions: 390/340 / H340 mm -Weight: 15 kg

Centrifugal fan, centrifugal fan, centrifugal fan SIEMENS blower 2CW5367-1 n: 2760 rpm motor : 0.0.000 rpm 26 kW 230 / 400 V IP55 Dimensions: 335 x 310 x 300 mm used, tested !

Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.0 kW -Speed: 1420 rpm -Volume flow: m³/h -Pressure: Pa -without: housing -Impeller outside: Ø 430 mm -Impeller inside: Ø 270 mm -Sash: 100 x 180 mm -Sheet metal plate diameter: 650 mm -Sheet metal plate bolt circle: 600 mm -Number: 3x fans available -Price: per piece -Dimensions: 400/650/H650 mm -Weight: 52 kg

Centrifugal fan, Centrifugal fan, Centrifugal fan PAGUS Pneumatic wheel diameter: Ø 800 mm Intake flange: Ø 350 mm, Inner diameter: Ø 290 mm Output flange: 350 x 280 mm, Inner dimension: 290 x 220 mm Motor : VEM KMER 132 M4 7,7,000 5 kW 1485 rpm 380 / 660 V 3AC IP54 New !' Dimensions: 1800 x 800 x 1340 mm

Centrifugal fan, centrifugal fan GEBHARDT P2M-F3B2E-RRB LG/90 Vmax.: 1670 m3/h ptmax.: 1700 Pa Motor : 1,1,000 5 kW 230 / 400 V IP55 with airflow regulation and filter ! used, tested ! Dimensions: 1200 x 560 x 730 mm

Fan, ventilator, electric motor, blower, axial high-performance fan -Manufacturer:Helios, axial fan axial fan suction fan -Power: 1.1 kW 2890 rpm / 1.1 kW 2880 rpm -Fan: Ø 400 mm -Number: 7x fans available -Price: per piece -Dimensions: 610/350/H610 mm / 635/350/H635 mm -Weight: 28 kg/piece / 32 kg/piece

Axial fan, axial fan, axial fan SIEMENS 2CC2352-1AA1 V: 1,1,000 45 m3 / s Motor : 0.56 kW 2770 rpm 230 / 400 V IP55 used, tested ! Dimensions: 480 x 480 x 330 mm

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm -Weight: 21 kg

Centrifugal fan, centrifugal fan, centrifugal fan A. WIDMER AG RH 31M-V DK., 2 C.1R n: 1370 / 1120 rpm motor : 0.15 kW 380 V IP44 for AGIE CUT 300 ! used, tested ! Dimensions: 490 x 340 x 500 mm

Control cabinet fan, filter fan RITTAL, EBM TYPE: SK 3153100 ( SK3153100 ) W2E200-HH38-07 Fan wheel: Ø 200 mm Motor : 64 Watt 230 V used, tested ! Dimensions: 325 x 325 x 145 mm

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: Witt & Sohn, Mushroom head hood type PK wd 500 x-schw. VZ -Hood opening: mechanically lockable, handwheel -Bolt circle Ø 550 x 12 mm -Quantity: 2x hoods available -Price: per piece -Overall dimensions: Ø 905 x 820 mm -Weight: 89 kg/unit

Axial fan, axial fan set EBM PAPST 4656 N Blade diameter: 110 mm Installation dimensions: 119 x 119 x 38 mm 19 / 18 W 230 V 50 - 60 Hz Price is for 2 pcs. New ! Dimensions: 120 x 120 x 80 mm

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Quantity: 6x hood available -Price: per piece -Dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.

Fan wheel, axial impeller WINGFAN P9TR diameter: Ø 990 mm necessary shaft diameter: Ø 48 mm wavelength: 112 mm groove width: 14 mm hub diameter: Ø 100 mm hub length: Ø 70 mm New !' Dimensions: 9990 x 990 x 210 mm

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 40 GL 37081-86 HH -Bolt circle Ø 110 x 18 mm -Quantity: 1x hood available -Dimensions: 220/140/H220 mm -Weight: 5.4 kg

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 65 GL 37081-86 HH -Flange: DIN 2576 ND10-NW65/76 -Bolt circle Ø 143 x 18 mm -Number: 2x hood available -Price per piece -Total dimensions: 280/185/H255 mm -Weight: 9 kg/pc.

Cooling fan for engine brake, external fan LENZE A 29130 motor: 0.048 kW 220 / 380 V Inner diameter: Ø 154 mm New ! Dimensions: 156 x 205 x 156 mm

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Quantity: 5x hood available -Price: per piece -Dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 150 GL 37081-86 HH -Bolt circle Ø 238 x 22 mm -Number: 1x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 35 kg/pc.

Sound insulation box with fan MAPRO fan: 0.25 kW PF1K6 400/4 1400 rpm Dimensions inside: 1450x 750 x 690 matching LU58, FI29, EL419, EL420 ! Dimensions: 1580 x 830 x 800 mm

Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Ziehl-Abegg, axial fan -Type: FE050-4EK.41.V7 -Power: 0.78 kW / 1250 rpm -Fan: Ø 585 mm -Number: 1x fan included -Price: per piece -Dimensions: 585/585/H185 mm -Weight: 13 kg/pc.

Radiator with blower, cooling fan, oil cooler EBM W2E 250 AB05 01 ( W2E250AB0501 ) radiator : 250 x 240 x 80 mm fan: Ø 250 mm 0,0,0,000 mm /br /br /0,0 135 KW 2500 rpm 220 V Dimensions: 500 x 360 x 200 mm

Fan / Cooler / Dryer, Glue Dryer GATH 80944-120304 Fan 0,0,000 25 kW TECUMSEH refrigeration unit 17.5 m3/h duct connection: 250 x 500 mm Dimensions: 2000 x 800 x 1480 mm

Direction of rotation - housing position LG 0 Operating temperature 20° C Density 1.2 kg/m³ Flow rate 3,600 m³/h Total pressure increase 3947 Pa Speed 2,950 min-1 max. operating temperature 40° C Motor rated power 7.5 kW Voltage 400 V Frequency 50 Hz Weight approx. 218 kg

Used centrifugal blower from Reitz Umwelttechnik – 22 kW, 400 V, 50 Hz - Manufacturer: Reitz Umwelttechnik - Type: MSE 056-009530-00 - Power: 22 kW - Voltage: 400 V, 50 Hz - Volume flow: 95-100 m³/min - Pressure boost: 534-560 daPa - Speed: 2925-2940 rpm (max. 3100 rpm) - Suction temperature: up to 80 °C - Density: 1.205 kg/m³ - Shaft power: 11.5-16.4 kW - Condition: Used, functional. Includes spare engine. - Other blowers with 7.5 kW and 22 kW power available on request.

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

Centrifugal fan, chip extraction fan, fan, extraction, chip fan, fan wheel, fan housing -Fan housing: for exhaust fans -Fan mount: Ø 215 mm, bolt circle Ø330 mm -Inlet: Ø465 mm / bolt circle Ø495 mm M8 -Outlet: 200 x 280 mm -Number: 2x housing available -Price per piece -Dimensions: 780/290/H820 mm -Weight: 30 kg/pc.

centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Boge, fan from compressor type SL 270 -Fan: Ø 420 mm -Engine: Type FC80/2 -Power: 1.1 kW / 2815 rpm -Hole circle: Ø 295 x 22 mm -Total dimensions: Ø 495 x 315 mm -Weight: 13 kg

Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.

Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan -Manufacturer: Alko-Therm, centrifugal fan type RZR 11-355 -Motor: Siemens 0.9/3 kW -Speed: 980/1450 rpm -Connection input: Ø 300 mm -Connection output: 460 x 300 mm -Dimensions: 1200/640/H670 mm -Weight: 89 kg

Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm -Weight: 30 kg/piece

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan -Manufacturer: Ziehl-Abegg, axial fan EAC GR45G-4EK.41.2R -Engine: RH350-4EK -Power: 0,30 kW / 1330 U/min -Fan wheel: diameter 365 mm -Protection rating: IP44 -Dimensions: 430/430/H235 mm -Weight: 7.7 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 310-4-4 -Speed: 1330/1050 rpm -Power: 0.12 kW -Protection class: IP 44 -Dimensions: Ø 310 x 165 mm -Weight: 5.5kg -Quantity: 1 piece available

Ventilator, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, smoke gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 280-2 -Speed: 2800 rpm -Power: 0.4 kW -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: Ø 280 x 175 mm -Weight: 8.5 kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: FB045-6DK.4C.6P -Voltage: 3Ph 230/400V -Power: 0.17 kW / 920 rpm -Hole circle: Ø 515 mm -Quantity: 2x fans available -Price per piece -Dimensions: Ø 545 x 185 mm -Weight: 8.1 kg/pc.

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: EMI, Axial fan Axial fan -Fan motor:Type: 82D-2010/XX -Voltage: 220V / 50/60 Hz -Power: 10/45 W / 1300/1550 rpm -Impeller: Ø 200 mm -Protective cage: Ø 255 mm -Mounting hole circle: Ø 285 mm -Overall dimensions: Ø 305 x 95 mm -Weight: 1.6 kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Ziehl-Abegg, axial fan axial fan suction fan -Type: ... 500-4-4ADsp -Power: 0.42 kW / 1360/1050 rpm -Fan: Ø 500 mm -Quantity: 1x fans available -Price per piece -Total dimensions: 860/850/H180 mm -Weight: 21 kg/pc.

erge-spirale table cooler 185 DM3 Air cooler from 1989, 1 available 6 fans, 185 l, 15 bar Manufacturer: erge-spirale Model: 185 DM3 Type: Table Cooler Serial number: 471-60487 Fans: 6 Volume [l]: 185 permissible. Overpressure [bar]: 15 Year of Make: 1989 Weight [kg]: 2.500 Dimensions LxWxH [m]: 5.20 x 2.45 x 2.00

Radial fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, suction, chip blower, high performance fan -Manufacturer: Reitz, radial fan chip extraction fan type MXE 020-018030-00 -Engine: Dutchi DM 160 MX2 15 kW -Speed: 2935 rpm -Volume flow: 180 m³/min / 10800 m³/h -Connection input: Ø 245 mm -Connection output: Ø 390 mm -Dimensions: 1460/1160/H1500 mm -Weight: 392 kg

Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Fan, fan, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Rosenberg, axial fan axial fan suction fan -Type: ... -Power: 0.52 kW / 1340 rpm -Fan: Ø 500 mm -Transport dimensions: 950/455/H740 mm -Weight: 21 kg/pc.

Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg