chin fan used for sale

Faecherklebebinder - Fanbinder Schmedt PraeColl Year 1986 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung  - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhoehung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Faecherbindegeraet - Fanbinder Schmedt PraeColl Year 1974 - Serial-No. 91 Book block thickness max. ca. 80mm Book block height max. 345mm Power supply 230V (A. C.) -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Rosenberg, axial fan axial fan suction fan -Type: ... -Power: 0.52 kW / 1340 rpm -Fan: Ø 500 mm -Transport dimensions: 950/455/H740 mm -Weight: 21 kg/pc.

Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung  - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung  - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Side channel compressor, side channel blower, vacuum pump, blower, dust extraction fan, exhaust gas extraction, welding fume extraction, suction, fan, pressure blower, vacuum blower, low pressure fan -Pressure blower: High pressure blower with transport rollers -Motor: elsto Type:ES 160M2A-40 H -Motor power: 11 kW / 2900 rpm -Volume flow: m³/min -Connection input: Ø 185 mm -Connection output: Ø 160 mm -Base plate: 800 x 250 mm -Dimensions total: 1260/920/H1170 mm -Weight: 161 kg with pallet

Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Motor power: 15 kW / 2935 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg

Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

Centrifugal fan, fan, exhaust, fan wheel, fan blades, fan blades -Fan wheel: fan blades for exhaust fans -Diameter: 900mm -Receptacle: Ø 38 mm -Quantity: 9x fan wheel available -Price per piece -Dimensions: Ø 900 x 85 mm -Weight: 16 kg/pc.

Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Robotized cell for 3D laser cutting 3D laser cutting cell, powered by a TRUMPF LASER TRUDISC 2000 (FD24) source. The line includes: ROBOT FANUC R-2000iB 165 F year. 2007.XII. + CABINET + TEACH PENDANT HEAD FOR LASER CUTTING PRECITEC LD 30C D50 YR30 LENZE MCM09C30 -RS0F1 SYNCHRONOUS SERVO DRIVE 2 PCS ROTARY TABLE EXPERT-TUNKERS TYPE ED920 / 1655/2 POWER SOURCE TRUMPF LASER TRUDISC 2000 (FD24) SICK SAFETY CURTAINS INSTALLED ALBANY DOOR HIGH-SPEED DOOR SYSTEM MP300 CONTROL PANEL SIEMENS SIMATIC MULTI PANEL + SOFTWARE CONTROL CABINET FIBER OPT CUTTING CELL (external 3.4 x 5.2 m, height 2.9) Additionally, we include full cabling necessary for the operation of the 3D cell. If you have any questions, we remain at your disposal

Centrifugal fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan centrifugal fan type MPR 351 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Connection: input Ø 305 mm -Connection: output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Axial fan set , axial fan EBM PAPST 3x TYPE: 4650N 19 Watt 230 V 1AC 50 / 60 Hz New !br /New ! Dimensions (fan): 119 x 119 x 38 mm Dimensions ( packaging ): 120 x 120 x 120 mm

Centrifugal fan, centrifugal fan, centrifugal fan S&P, ABB CBT-60 N PTC fan wheel diameter: approx. Ø 240 mm motor: 0.18 kW 2780 rpm 230 / 400 V 3 AC 50 Hz intake connection: Ø 110 / 155 mm output flange: Ø 61 / 94 mm fan base: 120 x 120 mm used, tested ! dimensions: 335 x 260 x 380 mm

Centrifugal fan, centrifugal fan, centrifugal fan PAGUS SKg 63-2A2 fan wheel diameter: approx. Ø 240 mm motor: 0. 18 kW 2760 rpm 220 - 240 / 380 - 420 V 3 AC 50 Hz IP55 intake connection: Ø 100 / 110 / 165 mm output flange: Ø 68 / 110 / 115 mm fan base: 160 x 125 mm used, tested ! Dimensions: 480 x 290 x 340 mm

Centrifugal fan, centrifugal fan, centrifugal fan DIETZ MOTOREN type GT 100 - T - 080 / 2 fan wheel diameter: approx. Ø 300 mm V: max. 20 m3/min Ps: 2,38 kPa motor: 1.0 kW 2840 rpm 220 - 240 / 380 - 420 V 3 AC 50 Hz IP54 intake connection: Ø 125 / 205 mm outlet flange: Ø 95 / 165 mm used, tested ! Dimensions: 460 x 350 x 450 mm

Centrifugal fan, centrifugal fan, centrifugal fan DIETZ MOTOREN type DN 16 Q fan wheel diameter: approx. Ø 160 mm V: max. 26 m3/min Ps: 0,9 kPa motor: 0.9 kW 2880 rpm 230 / 400 V 3 AC 50 Hz IP56 intake connection: Ø 118 / 135 mm outlet flange: 140 x 140 mm / Ø 118 / 135 mm fan base: 125 x 95 mm used, tested ! Dimensions: 460 x 330 x 440 mm

Centrifugal fan, centrifugal fan, centrifugal fan DIETZ MOTOREN Type GT 100 - T - 80 / 2 fan wheel diameter: approx. Ø 320 mm V: max. 20 m3/min Ps: 2,38 kPa motor: 1.0 kW 2910 rpm 220 - 240 / 380 - 420 V 3 AC 50 Hz IP54 intake connection: Ø 115 / 134 mm outlet flange: Ø 100 / 165 mm used, tested ! Dimensions: 500 x 440 x 445 mm

Centrifugal fan, centrifugal fan, centrifugal fan DIETZ MOTOREN type GT 100 - T - 080 / 2 fan wheel diameter: approx. Ø 320 mm V: max. 20 m3/min Ps: 2,38 kPa motor: 1.0 kW 2880 rpm 220 - 240 / 380 - 420 V 3 AC 50 Hz IP54 intake connection: Ø 115 / 134 mm outlet flange: Ø 100 / 165 mm used, tested ! Dimensions: 500 x 440 x 450 mm

Centrifugal fan, centrifugal fan, centrifugal fan DIETZ MOTOREN type GT 080 - T - 071 / 2 fan wheel diameter: approx. Ø 250 mm V: max. 10 m3/min Ps: 1,54 kPa motor: 0.3 kW 2830 rpm 220 - 240 / 380 - 420 V 3 AC 50 Hz 60 Hz - operation is possible ! IP54 intake connection: Ø 100 / 114 mm outlet flange: Ø 80 / 150 mm used, tested ! Dimensions: 390 x 345 x 410 mm

Hardly used exhaust fan - was only in operation from 2015 - 2019 and was then dismantled again Data sheets available Engine power: 110 kW Flow rate 80,000m³/h Matching exhaust tower with heat exchanger can be purchased as an option, but is very large (3.33.810m)

Axial fan, axial fan VEM, MASCHINENFABRIK NEMA LANW 630.6 PAS TGL 20675 impeller: Ø 600 mm engine: ALM 174/6-A1S/210 0,8 kW 910 rpm 220 / 380 V 3AC 50 Hz IP43 New ! Dimensions: 880 x 880 x 290 mm

Electric air heater with centrifugal fan VOLTA Type ERRG 10,0 kW 400 C 3AC flange ( inside / outside ): 480 x 300 / 520 x 340 mm centrifugal fan: DIETZ MOTORS type DN 16 Q fan wheel diameter: approx. Ø 160 mm V: max. 26 m3/min Ps: 0.0.0 m3/min. 9 kPa motor: 0.9 kW 2880 rpm 230 / 400 V 3 AC 50 Hz IP54 intake connection ( inside / outside ): Ø 120 / 135 mm outlet flange ( inside / outside ): 135 x 135 / 180 x 180 mm used, tested ! Dimensions: 620 x 400 x 640 mm

Fan, fan, electric motor, blower, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan, diagonal fan, pipe fan, diagonal fan -Manufacturer: Maico, axial fan tube fan diagonal fan -Type: EDR 71-0080.0665 -Power: 3.74 kW -Flow volume: approx. 23140 m³/h -Quantity: 3x fans available -Price per piece -Dimension: 730/720/H720 mm -Weight: 48 kg/pc.

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan, extraction filter system -Manufacturer: Oelde, suction system suction filter system type size 16 -Air output: 22 m³/h -Motor: 1.85 kW / 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Fan motor, three-phase electric motor VEM ALM 142/4-A1 ( ALM142/4-A1 ) TGL20675 0,4 kW 1390 rpm 220 / 380 V IP 43 flange diameter (fan wheel): Ø 150 mm flange diameter (motor): Ø 142 mm New ! Dimensions: 153 x 153 x 170 mm

Fan for chip transport

Centrifugal fan, centrifugal fan, centrifugal fan ZIEHL-ABEGG type: RD20S-4EW.4C.1L speed: 1140 rpm Motor : 0.36 kW 230 V AC used, tested ! Dimensions: 380 x 320 x 350 mm

axial fan, axial fan, axial fan VENTO type WL4 impeller: Ø 280 mm grid diameter: Ø 550 mm Material ( impeller ): Sheet steel Motor: 0,075 kW 1300 rpm 220 V 1AC 50 Hz control box cover missing ! used, checked! Dimensions: 340 x 330 x 190 mm

Description: Lot composed of approximately 113 spacers for YANMAR fan - art.129457-44760 ITEMS NEVER USED STILL IN ORIGINAL PACKAGING Approx. Onsite Dimension. (l x w x h): 600 x 400 x 400 mm, weight approx.: 15 kg

Approx. Onsite Dimension. (l x w x h): 300 x 300 x 150 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 400 x 180 x 400 mm, weight approx.: 10 kg

Description: • Centrifugal extraction fan • Serial number 22 • Motor power 55 KW-1475 rpm • Fan diameter approx. 700 mm • Belt drive • Input pipe diameter approx. 700 mm • Output pipe diameter approx. 650 mm Approx. Onsite Dimension. (l x w x h): 2,550 x 1,740 x 2,050 mm, weight approx.: 900 kg

Description: • Centrifugal extraction fan • Serial number 1046 • Motor power 75 KW-1475 rpm • Fan diameter approx. 1200 mm • Belt drive • Input pipe diameter approx. 800 mm • Output pipe diameter approx. 750 mm Approx. Onsite Dimension. (l x w x h): 3,100 x 2,000 x 2,250 mm, weight approx.: 1,100 kg

Description: • Centrifugal extraction fan • Serial number 308 • Motor power 37 KW-1475 rpm • Fan diameter approx. 1000 mm • Belt drive • Input pipe diameter approx. 650 mm • Output pipe diameter approx. 550 mm Approx. Onsite Dimension. (l x w x h): 2,530 x 1,550 x 1,850 mm, weight approx.: 700 kg

Description: • Centrifugal extraction fan • Motor power 15 KW-2940 rpm • Fan diameter approx. 500 mm • Belt drive • Input pipe diameter approx. 300 mm • Output pipe diameter approx. 300 mm Approx. Onsite Dimension. (l x w x h): 1,470 x 1,080 x 1,420 mm, weight approx.: 320 kg

Description: Features: Approx. Onsite Dimension. (l x w x h): 570 x 860 x 520 mm, weight approx.: 30 kg

Welding robot robot FANUC 100i OConstruction year: 1998 Country of origin: Japan Axis range: J1: +/-165° J2: +135 -75° J3: +150 -149° J4: +/-190° J5: +/-140° J6: +/-320° Max arm area: 1 368 mm Pallet: 850 x 810 mm Power source: OTC Max payload: 6 kg Control: CNC SYSTEM R-J2

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X And Z-Axes ...

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 I09rgztr Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X  ...

QUASER MK-60 Milling machine with two pallets 1993 with Fanuc O-M 3 axis machine. Work normally with robotic arm and 30 place for magazine tools. CAT 40. With Chip Conveyer. VMC. Weight 8500kg Axis X 610.0 mm Axis Y 510.0 mm Axis Z 510.0 mm

Machining center Victor Taichung VC-205 Fanuc (A3738) Make: Victor Taichung Model: VC-205 CNC: Fanuc YEAR 2016 X-AXIS TRAVEL 2050 mm Y-AXIS TRAVEL 550 mm Z-AXIS TRAVEL 560 mm DISTANCE SPINDLE NOSE-TABLE 180-740 mm DISTANCE COLUMN-SPINDLE AXIS 638 mm RAPID FEEDS X-Y-Z 30 m/min SPINDLE 12000 rpm; 15-18,5 kW; BT-40 TABLE SIZE 2500 x 550 mm MAX ADMITTED LOAD 1200 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE CHAIN-TYPE ; 40 POS MAX TOOL DIAMETER 80 mm MAX TOOL LENGHT 350 mm MAX TOOL WEIGHT 8 Kg CONTROL UNIT FANUC 0i-MF WEIGHT 9050 Kg OVERALL DIMENSIONS 5300 x 3430 x 3045 mm ACCESSORIES SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE PENDULUM MACHINING WITH CENTRAL SPLASH GUARD AND SIDE WINDOW; POWER-ON HOURS 7900.

Victor Taichung G135 Fanuc vertical machining center Make: Victor Taichung Model: G135 CNC: Fanuc X-AXIS TRAVEL 1350 mm Y-AXIS TRAVEL 700 mm Z-AXIS TRAVEL 700 mm DISTANCE SPINDLE NOSE-TABLE 100-800 mm RAPID FEEDS X-Y-Z 20 – 20 – 18 m/min SPINDLE 6000 rpm; 15-18,5 kW; BT-50 TABLE SIZE 1400 x 700 mm MAX ADMITTED LOAD 2200 Kg TOOL MAGAZINE CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER 127 (250) mm MAX TOOL LENGHT 300 mm MAX TOOL WEIGHT 15 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 10 s CONTROL UNIT FANUC 0i-MF WEIGHT 11500 Kg OVERALL DIMENSIONS 4295 x 2965 x 3075 mm

Vertical machining center KOMATECH KT420L Fanuc Make: KOMATECH Model: KT420L CNC: Fanuc X-AXIS TRAVEL 700 mm Y-AXIS TRAVEL 420 mm Z-AXIS TRAVEL 300 mm DISTANCE SPINDLE NOSE-TABLE 170-470 mm RAPID FEEDS X-Y-Z 50 – 50 – 60 m/min SPINDLE 24000 rpm; 3,5-22,6 kW; BBT-30 TABLE SIZE 800 x 400 mm MAX ADMITTED LOAD 300 Kg TOOL MAGAZINE TURRET TYPE ; 21 POS MAX TOOL DIAMETER 80 mm MAX TOOL LENGHT 200 mm MAX TOOL WEIGHT 3 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 1,36 s CONTROL UNIT FANUC 0i-MF WEIGHT 2300 Kg OVERALL DIMENSIONS 2520 x 2065 x 2655 mm

Vertical machining center KOMATECH KT360D Fanuc Make: KOMATECH Model: KT360D CNC: Fanuc X-AXIS TRAVEL 520 mm Y-AXIS TRAVEL 360 mm Z-AXIS TRAVEL 300 mm RAPID FEEDS X-Y-Z 50 m/min SPINDLE 24000 rpm; 2,2-20 kW; BBT-30 TABLE SIZE 650 x 900 mm MAX ADMITTED LOAD 200 Kg HIGH PRESSURE COOLANT 20 Bar TOOL MAGAZINE TURRET TYPE ; 21 POS MAX TOOL DIAMETER 80 mm MAX TOOL LENGHT 200 mm MAX TOOL WEIGHT 3 Kg TOOL EXCHANGE TIME CHIP-TO-CHIP 1,36 s CONTROL UNIT FANUC 0i-MF WEIGHT 4300 Kg OVERALL DIMENSIONS 3150 x 1760 x 2715 mm

Amada C3000 with automation Machine is in good condition year 2001

PAMA 200 CNC Floor Type Horizontal Boring & Milling machine Built 1997 / 2013 X=16.000, Y=6.000, Z=1.330, W=830mm Spindle diam. 200mm ISO 50/60 Spindle RPM: 1-680 75HP CNC FANUC 31i-M Table 5.000x5.000mm, X travel 2.500mm max. loading 120 Ton Rotation 360.000° Floorplates 4.000 x 15.000mm Chip conveyor Angle head This machine disassembled end of 2021. It was in a very good condition.