cheese process used for sale

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,

Top perforating machine with foot operation, 60 cm working width

Case bending machine Make Tränklein Model DBM 61 Year 1970´s Width 610 mm Condition refurbished after order Available Direct

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Case bending machine - automatic Make Tränklein Model BDM60 Year 1970´s Width 600 mm Condition refurbished after order Available Direct

Case rounding machine Make Schmedt Model Prärund HHS17-45 Year 1997 Size 450 mm working width and spine width up to 100 mm Available direct

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

• More information: on request

FINN POWER PRIMA POWER EBe system Year 2011 4kw All-electric machine tower warehouse 10 levels punching machine with electric shear Loading and unloading robots Electric panel bender 2200 height 205 Available April 2024

Laser Salvagnini L5 FIBER 3 KLW Year 2011 with automatic stacker Unloading robots Visible in operation Available January 2024

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Vertical machining center Chiron FZ08W :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 21M Tool connection: HSK 32 Spindle power: 3,7Kw Number of spindle revolutions: 15000 Number of tools: 12 X Axis Stroke: 300mm Y Axis Stroke: 250mm Z Axis Stroke: 250mm Rapid feeds linear axes X Y Z: 40 40 60m/min Guides: roller Pallet change: yes Pallet size: 550 x 300mm Maximum load allowed: 200Kg Rotopallet: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 2600mm Width: 1400mm Height: 2100mm Weight: 2200Kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2820 rpm at 50 Hz -Motor: 2.2 kW 5800 rpm at 100 Hz -Voltage: 380 V -Shaft mounting: Ø 30 mm -Weight: 15 kg

Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.85 kW at 17570 rpm at 300 Hz -Voltage: 165 V -Receptacle: Shaft collet -Number: 8 motors available -Price: per piece -Dimensions: 350/75/H160 mm -Weight: 12 kg

Wire-O punching & binding machine Make Rilecart Model FP340 Year 2000 Workingwidth 340 mm Tools 1 x 3:1 with square holes for books Closing all standard thicknesses by manual lever Details with precise side lay, electric foot switch Available Direct

Double End Processing Machine Bar feeder Rod diameter 10 - 60 mm Workpiece length 30 - 340 mm Saw blade diameter 350 mm

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg

Key data: 1000 mm, 500 mm, 500 mm

Inv. Num. : 5515 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: Siemens 810D Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 20 Drehzahl: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 cm Spindelleistung: 25 kVA Kegel: SK 40 Maschinengewicht: 4619 kg Ausstattung: Späneförderer Verfügbarkeit: April 2022 2022: GO Spindel

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm L 25 mm -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 15 mm L 25 mm -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Key data: 1000 mm, 500 mm, 500 mm

Inv. Num. : 6776 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: SIEMENS Sinumerik Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Maximale Drehzahl der Spindel: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 mm Spindelleistung: 25 kVA Kegel: SK 40 Anzahl der Stapelpositionen: 20 Stücke Maschinengewicht: 4619 kg

Key data: 900 mm, 560 mm, 480 mm

Inv. Num. : 5373 Type: MCV 1000 POWER 5AX Producer: MAS Created: 2009 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 57709 h Spindle hours: 47727 h Table diameter: 520 mm Maximum table load (even): 400 kg Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 8000 1/min Mechanical feed length axis X: 900 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 480 mm Cone: ISO 50 Number of tools: 40 pieces Tool diameter: 125 mm Max. tool weight: 15 kg Machine height: 3300 mm Machine length: 4600 mm Machine width: 3600 mm Machine weight: 13 t 2020: new spindle

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 16 mm L 10 mm -Number: 2x motors available -Price: per piece -Weight: 3.3 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

Key data: 1800 mm, 850 mm, 800 mm

Inv. Num. : 6502 Type: FTV 850 Producer: Cincinnati Created: 2002 Parameters: Control System: Acramatic Work table length: 2300 mm Work table width: 900 mm Tool magazine: 36 pieces X-axis travel: 1800 mm Y-axis travel: 850 mm Z-axis travel: 800 mm Spindle power: 42 kW Machine height: 3800 mm Machine length: 7200 mm Machine width: 3500 mm Machine weight: 17000 kg Equipment: Technical Documentation 40x Tool Holder 1x D100 cutter

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

Key data: 1050 mm, 510 mm, 560 mm

Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ

Key data: 400 mm, 700 mm, 400 mm

Inv. Num. : 6723 Type: BA400-2 Producer: SW Created: 2004 Parameters: Control system: Siemens - Sinumerik 840D Maximum spindle speed: 17500 1/min Tool magazine: 120 pieces X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ High Pressure Pump Filtration Knoll Preparation for 5 axis

plastic container standing 3x12 m, free loading

Good condition Auction-ID: A7-45427-196

Key data: 760 mm, 430 mm, 450 mm

Inv. Num. : 6921 Type: VMCF-760 Producer: Microcut Created: 2007 Parameters: Control system: Fagor 8055 MC Work table length: 900 mm Work table width: 410 mm X-axis travel: 760 mm Y-axis travel: 430 mm Z-axis travel: 450 mm Cone: ISO 40 Machine weight: 3,300 kg

Key data: 600 mm, 4450 mm, 450 mm

Control Heidenhain TNC 426 Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 min-1 Tool magazine for 30 Wkz., SK 40

Key data: 1630 mm, 860 mm, 760 mm

Basic machine data Used 3-axis machining center from HURCO Make: HURCO Type: VMX64 Year of Make: 2006 Condition: Used - In working order Control: Name: HURCO Ultimax 4 CNC Track Control Drive power: 285 kW Travels: x-travel: 1630 mm // y-travel: 860 mm // z-travel: 760 mm Technical data: • Spindle 25-8000 rpm • SK 50 interface • Clamping table size: 1650 mm x 9000 mm • 32-fold tool changer • Feed range: 1-18000 mm/min • IKZ • Dividing head type Kitagawa NC 300 rotary and swivel table • Chip conveyor The machine is in good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 1010 mm, 800 mm, 1010 mm

Inv. Num. : 6942 Type: H63 Producer: ZPS Created: 2005 Parameters: Control system: Siemens Work table length: 800 mm Work table width: 630 mm X-axis travel: 1010 mm Y-axis travel: 800 mm Z-axis travel: 1010 mm

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...

Key data: 3200 mm, 750 mm, 695 mm

Basic machine data Used 5-axis machining center from HEDELIUS Make: HEDELIUS Type: Tiltenta 7 Magnum Year of Make: 2016 Condition: very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Travel: x-axis: 3200 mm // y-axis: 750 mm // z-axis: 695 mm Technical data: • Spindle: 50-12,000 rpm • SK40 interface • Fixed machining table with integrated NC rotary table • Ø table: 750 mm • Max. workpiece weight: 800 kg • B-axis infinitely variable: + 98°/- 98° • 50-fold tool changer • Max. tool length: 330 mm • Feed speeds: up to 40 m/min • IKZ (internal coolant supply) • 500 L tank with paper belt filter • Chip conveyor Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

The offered enrobing machine is in very good condition. It is currently still in use and can be viewed on site. Further information is available on request. The pressing machine that can be seen at the end of the production chain is not part of this offer, but is also for sale (see our other listings).

max. film width: cm max. speed: /h serial no.: 55C P0009 inlet width: 55 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ascobloc food processor with accessories, 4 grating drums Auction-ID: A7-45677-11