cheese process used for sale

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Power: 0.22 kW at 17250 rpm at 300 Hz -Voltage: 133/200 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 3 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.4 kW 2890 rpm at 50 Hz -Power: 6.6 kW 5880 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 240 x 20 mm -Dimensions: 550/270/H150 mm -Weight: 51 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 165 x 10 mm -Dimensions: 500/250/H160 mm -Weight: 42 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 35 mm -Tool: Ø 180 x 40-55 mm -Dimensions: 540/250/H160 mm -Weight: 46 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 153 x 117 mm -Dimensions: 630/400/H200 mm -Weight: 56 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2880 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 220/380 volts -Receiving shaft: Ø 40 mm -Tool: electrically movable -Tool: Ø 180 x 28-48 mm -Dimensions: 830/400/H200 mm -Weight: 70 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 20 mm -Tool: mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H155 mm -Weight: 4.2 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H140 mm -Weight: 3.8 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Perske, milling motor for edge processing machines -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 15 x 17 mm / M12 -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DVMS 903/2 -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 30 x 32 mm -Tool: Ø 70 x 20 mm / insert milling cutter -Number: 1 piece available -Dimensions: 250/59/H140 mm -Weight: 3.8 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KN 71.14/2 with bracket -Power: 3 kW 2880 rpm -Voltage: 380V / 50Hz -Receiving shaft: Ø 30 x 70 mm -Tool: max. Ø 440 mm -Dimensions: 700/570/H480 mm -Weight: 100 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21.05-2 with bracket -Power: 0,15 kW 11160 U/min -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Number: 2x milling motor available -Price: per piece -Dimensions: 260/200/H200 mm -Weight: 4.8 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DKNS 502/2 with bracket -Power: 0.15 kW 11160 rpm -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21 05/2 with bracket -Power: 0.15/0.22 kW 11160/17250 rpm -Voltage: 133/200V / 200/300 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KCS 71.14-2 D -Power: 4.4 kW 2820 rpm -Voltage: 400 V / 50 Hz -Mounting shaft: Ø 30 x 40 mm / M30 x 3,5 -Number: 2x motor available -Price: per piece -Dimensions: 515/230/H150 mm -Weight: 37 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KCS 70.12-2 D -Power: 5.0 kW 5860 rpm -Voltage: 400 V / 100 Hz -Mounting shaft: Ø 40 x 80 mm -Number: 4x motor available -Price: per piece -Dimensions: 480/232/H150 mm -Weight: 34 kg/piece

Image processing system, central unit, high-end image processing, image processing controller, camera controller -Manufacturer: Keyence, image processing system image processing controller -Type: XG-X1500 -Extension modules: -DC40E / -NEC20E see photos -Shipping/Price: complete -Dimensions: 180/150/H175 mm -Total weight: 2.5 kg

Image processing system, central unit, high-end image processing, image processing controller, camera controller -Manufacturer: Keyence, Image processing system, Image processing controller -Type: XG-X2800 -Expansion module: CA-E200L (see photos) -Submission/Price: complete -Dimensions: 200/155/H175 mm -Total weight: 2.5 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power output at 50 Hz: 4.4 kW, 2890 rpm -Power output at 100 Hz: 6.6 kW, 5860 rpm -Hole: Ø 35 mm -Tool: Ø 250 mm -Number: 3x motors available Price: per piece (other types of engines also available) -Dimensions: 560/240/H160 mm -Weight: 50 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Number: 2x motors available -1x: right-hand thread -1x: left-hand thread Price: per piece -Weight: 20 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Motors: some with right-hand or left-hand threads -Number: 9 motors available Price: per piece -Weight: 3 kg/piece

Three-phase motor, electric motor, double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.49 kW -Speed: 2800 rpm -Shaft: Ø 15 x 25 mm -Design: B5 -Protection class: IP 54 Price: per piece Quantity: 3 pieces -Dimensions: 320/130/H155 mm -Weight: 13.7 kg/piece

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 38 mm -Tool: Ø 200 x 30-60 mm -Dimensions: 640/150/H250 mm -Weight: 52 kg

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg

Manufacturer: Koehler Bosshardt & Cie (France) Material: Stainless steel Construction: Vertical cylindrical tank Mounting: Installed on reinforced metal frame with fork arches Background: Domed back with low center outlet Draining: Stainless steel ball valve with connection and hose Use: Mixing or storage tank for liquid products Auction-ID: A1-44895-19

Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg

IN WORKING CONDITION. TESTED FOR FUNCTION There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-93

Additionally avaiablle BCF PP & PET Neumag 2 4 ✔ 2021 - 10 BCF PP & PET Neumag 6 6 ✔ 2022 - 15 Twisting & Cabling Saurer Volkmann 2021 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2021 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2021 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Twisting & Cabling Saurer Volkmann 2022 176 Avg. 3 Heatset Superba TVP 3 S 2021 72 8 Heatset Superba TVP 3 S 2022 72 8 Heatset Superba TVP 3 S 2022 72 8 PP & PET Spinnerets Mono Tricolor 144 144 240 210 360 330 420 420 Find more here - / Contact us at -

Key data: 630 mm, 630 mm, 630 mm

Spindle replacement 12/2018 Technical data: Manufacturer: Heller Type: H1000 Control: Siemens 840D SL Year of construction: 2008 (commissioning 2010/11) Travel X/Y/Z: X 630 mm, Y 630 mm, Z 630 mm Travel B-axis: 360° Working spindle Speed: 10,000 rpm (Kessler) Tools Tool changer: 54-fold Tool holder: SK40 Pallet changer: 2-fold Pallet size L/W: 500 x 400 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring system Drill Break Detection Chip conveyor Knoll coolant system with high pressure

Manufacturer: Boshite Model: TD-100 Type:Quilting Machine Voltage: AC 100-240V Frequency: 50/60 H Find more here - / Contact us at -

WEINIG UNICONTROL 10 3-spindle machining centre , cut-off saw and glazing saw. Width 30–220 mm, height 30–100 mm, length 330–2600 mm. Outputs 7.5–12 kW, speeds 2800–7000 rpm. Spindles Ø40 mm, transverse clamping 240 mm, longitudinal 160–240 mm. Estimated weight 2500 kg. Auction-ID: A1-45443-63

Key data: 762 mm, 508 mm, 610 mm

Hurco VMX 30 Year 04/2007 Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Spindle holder SK 40 Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Control HURCO WinMax ver. V8 01.09.25... Options see pictures Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m Interior was painted, scrapers of the telescopic covers were renewed. Machine can be viewed under power by appointment. Price is net plus VAT. Freely loaded onto trucks

Multi-Process Welding Machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-400 amps duty cycle: 100% duty cycle at 221 Amps Equipped with: LCD color display Equipped with: wire feed unit Includes: MIG/MAG torch Includes: MMA torch Includes: TIG torch Including: ground cable Includes: Electronic gas regulator Connection: 380 volts (plug not included) Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging Auction-ID: A3-43506-444

Water-cooled multi-process welding machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 60% duty cycle (250 A) Equipped with: LCD color display Equipped with: water cooler for MIG/MAG torch Includes: water-cooled MIG/MAG torch Including: TIG torch with accessories Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging Auction-ID: A3-43506-452

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

Stainless steel industrial V-mixer for homogeneous mixing of powders and granulates. Equipped with a double-conical V-drum on a robust frame. Driven via electric motors with gearboxes. Equipped with top inlet and bottom outlet valve for unloading the product. Suitable for applications in food, chemical, pharmaceutical and other powder processing processes. Condition: used; Visual signs of use, operation not tested. Construction: all stainless steel. Auction-ID: A3-43506-34102

General description Sapiens 1001 TFF machining center dedicated to sawing, drilling and machining components for windows/doors. Fixed gantry structure with crossbar on rigid columns. Pneumatic devices for automatic positioning of parts. Double work area with electronically controlled clamps (X1/X2). Two spindles with Y/Z axes, slewing heads and tool magazine (16+16+1). Soundproof enclosure. User-friendly interface and optimized security. Technical details Workpiece section: min 30x18 mm / max 230x140 mm Length: 300 to 2800 mm Strokes: X 4735 mm / Y 1235 mm / Z1,300 mm / Z2,405 mm Axis speed: X 120 m/min / Y 60 m/min / Z 45 m/min Pins: 10 kW + 12 kW, HSK F63, 12,000-18,000 rpm Saw blade: Ø max 450 mm, flange 140 mm Working height: 960 mm Pressure: 5 bar / Thrust: 720 N Weight: approx. 3600 kg Colours: RAL 7035 / RAL 5015 Dimensions: 5710 x 2600 x 2075 mm Included acces ...

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm