130,254 used machines on RESALE, but how to find them? Machine Search
Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12,000 1/min IKZ 30 bar Belt filter system Probe Tool magazine for 30 Wkz. SK 40 Conveyor
used
Key data: 7300 mm, 1000 mm, 650 mm
- Swivel angle A-axis: 0-90° freely programmable - C-axis swivel angle 0-355° freely programmable - Max. machining length without frontal machining: 7300mm - Max. machining length with front machining: 6980mm - Tool changer with 10 places, as well as a saw blade holder - 9 Material tensioner - Tool holder SK30 - 2-layer machining
Manufacturer: ETSCHEID Content: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good
Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm
Inv. Num. : 7911 Type: FZ 12 WM Producer: Chiron Created: 2011 Parameters: Control system: Fanuc Series 21iM Switch-on hours: 94645 h Hours: 45953 h Work table length: 850 mm Work table width: 350 mm X-axis travel: 550 mm Y-axis travel: 300 mm Z-axis travel: 425 mm Machine height: 2600 mm Machine length: 2800 mm Machine width: 1800 mm Equipment: Grips
Inv. Num. : 7917 Type: VF-2SS Producer: HAAS Created: 2015 Parameters: Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Spindle drive power: 22.4 kW Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg
Key data: 635 mm, 510 mm, 460 mm
CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions
Key data: 1000 mm, 600 mm, 700 mm
Ref.Nr. 00837 Name of the system: Vertical machining center Manufacturer: AXA Model VSC 2-M Year of construction 2000 Operating hours control on 51.155 h:56:02 Machine One 108350:06:047 Program run 34892:28:03 X axis stroke 2360mm/2 x 1000mm Y axis stroke 600mm Z axis stroke 700mm 1 spindle design SK 40 DIN 69 871 A 1 tool changer for 22 mounts side version 1 control panel with CNC path control Heidenhain TNC 426/430 on the left side of the machine 1 control cabinet integrated in the back of the machine Ball screws make Deutsche Star X axis 1510 – 4 – 3914 Ǿ 40 x 20 x 2960lg. Y axis 1510 – 4 – 5103 Ǿ 49 x 29 x 1300 lg. Z axis 1510 – 4 – 4811 Ǿ 40 x 10 x 1190 lg. Measuring system: Make Heidenhain X axis: LS 186 C 2440 ML Y axis: LS 186 C 740 ML Z axis: LS 186 C 940 ML Central lubrication aggregate make Bielomatik Hydraulic ...
used
Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg
4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg
This geared motor is manufactured by Muller Martini Weiterverarbeitungsmaschinen, under item no. 3672.1797.2. The price is CH 3000.- at Muller Martini.
Key data: 750 mm, 750 mm, 725 mm
GENERAL Project No.: 905674 Quantity: 1 pcs. Manufacturer: HECKERT (STARRAG) Type: HEC 500 D Control: Siemens 840 D solutionline Year of Make: 2011 Condition: Used machine Layers approx.: 2-3 layers DESCRIPTION MILL Travel in X 750 mm Travel in Y 750 mm Travel in Z 725 mm Max. rapid traverse speed in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 11/14/11 m/s2 Tool holder HSK 63 Max. speed milling spindle 15000 1/min Max. power at ED 10-40/100% 31/– kW Max. torque at ED 10-40/100% 200/– Nm Spindle diameter in the front bearing 75 mm 1 pc. horizontally arranged milling spindle/s Torque support for multi-spindle drill heads Tool magazine 60 stations Max. tool diameter 160 mm Max. tool length 400 mm Max. tool weight 10 kg Chip to chip time 2.7 s Rotary pallet changer 2-fold Pallet size 500×630 mm Max. workpiece weight per pallet 600 kg Rotary ...
Filmbelichter / Film Processor ECRM 360 Laser Red Serial-No. 4943 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Salvagnini Mod. Performer Year 2000 Manual loading Manual blades
Druckplatten - Entwicklungsmaschine / Plate Processor AZ FE Year 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Key data: 1120 mm, 510 mm, 510 mm
For sale. Mazak vertical machining center type VTC-20B with Kitagwa integrated rotary axis. X-, Y- and Z-axis travels are 1,120 x 510 x 510 mm. Table size: 1410 x 510mm. Table capacity: 800Kg. Maximum speed is 6,000 rpm. SK-40 spindle holder. The number of tool positions is 24 pieces ATC, max. tool Ø / max. tool Ø 80 mm ditto for free places / max. tool Ø with free places besides 110 mm max. tool length 350 mm max. tool weight 8 kg Feed range xy / feed range xy 1-8000 mm/min. Vorschubbereich z / feed range z 1-8000 Mm/min. Rapid traverse X/Y / rapid feed X/Y 30 m/min. Drive power / drive capacity 15 kW Weight of the machine approx. / weight 6500 kg
Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75 Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Number of axes: 5 Feed speeds in the X/Y/Z axis: 500/420/380 mm Feed rates in the C/B axes: 180°/360° Dimensions of the work table (L x W): 500 x 380 mm Maximum workpiece weight: 350 kg Spindle power: 15 kW Maximum spindle speed: 18000 rpm Tool magazine capacity: 30 pcs. Overall dimensions (L x W x H): 3360 x 2550 x 2600 mm Total weight of the DMU 50 eVolution machine: 6000 kg
x-travel: 350 mm y-travel: 240 mm Ucblcnl2H9 z-travel: 340 mm Speed: 20 - 4,500 1/min Table: D 400 x 280 Control: 810 D Shop mill SIEMENS Tool holder: SK 40 Rapid traverse: 5 m/min Spindle: 6.3 / 10 kW Total connected load: 15 kVA Approx. space requirement: 1.7 x 1.55 x 2.1 m Universal CNC Milling Machine, Rotary swivel table manual with angle display on the screen, El. Handwheel
ADIGE BLM LT652 Model : LT652/B Year of Manufacture : 2002 Laser Generator: DC025 (2500 Watts) Loading Length : 6500 Drain Length : 4500 Hours of Electrical Panel : 60433 Tension Laser Ore : 62285 Chiller : recently replaced Disassembly options - available now.
Eyeletting machine Make Hang Model Piccolo Year 1980 eyelet model 8E (5mm) Available direct
Eyeletting machine Make Hang Model Piccolo III Year 2000 eyelet model 24 (4mm) Available direct
Eyeletting machine Make Hang Model Piccolo Year 1990 eyelet model 8E (5mm) Available direct
Inv. Num. : 7814 Type: CWK 800 Producer: Starrag Heckert Created: 2004 Parameters: Control system: Siemens Sinumeric Switch-on hours: 60035 h Hours: 31689 h Work table length: 800 mm Work table width: 800 mm Maximum workpiece weight: 1500 kg Spindle power: 28 kW Machine length: 6330 mm Machine width: 5760 mm Machine weight: 18100 kg In 2021 repairs: Replacement of linear guides and ball screws on the X, Y and Z axes Spindle replacement and ATC cabling Machine geometry ATC Function Test
Inv. Num. : 7815 Type: HEC 800 Producer: Starrag Heckert Created: 2008 Parameters: Switch-on hours: 46529 h Hours: 19542 h Work table length: 800 mm Work table width: 800 mm Maximum workpiece weight: 2000 kg Spindle drive power: 28 kW X-axis travel: 1450 mm Y-axis travel: 1100 mm Travel distances Z-axis: 1300 mm Cone: SK 50 Machine length: 8300 mm Machine width: 5500 mm Machine weight: 27000 kg
Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spines 1-17,500 rpm, torque motor drive system, equipment including: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension 144 tool positions (2 x 72), clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air query control, inductive tool breakage detection, scraper belt conveyor KNOLL 800 K-1/400, coolant cleaning compact belt filter KNOLL FKA 1200 and much more.
Saddle Stitcher With brochure function Counter: 1.9 million Connecting Bridge DSF-DSC Duplo LDR , 2017 2 CollationTower Duplo DSC – 10/60, 2020 Cover Feeder Duplo DSF-CFL, 2016 Counter Duplo DKT-K, 2017 Head and foot trimming Duplo DKT-200, 2017 Front Trimmer Duplo DBMS-T, 2017 Stitcher Duplo DBMS-S, 2017 Folder Duplo DBMS-F2, 2017 In production Available: immediately Located: Germany
Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...
Key data: 2 mm, 810 mm, 700 mm
General Manufacturer: Spinner Type: MVC1600-B Year of Make: 2006 Switch-on hours: 30,240 h Control: Siemens 810D ShopMill Travels: X 1,600 mm Y 810 mm Z 700 mm Spindle Speed: 6,000 rpm Power: 25 kW Tool holder: SK50 Tool Changer Number of stations: 24-fold with double arm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Blow-out device for spindle High-pressure system IKZ 26 bar Preparation 4th axis Preparation of workpiece probes
Inv. Num. : 8135 Type: MCV 750 A speed Producer: MAS Created: 2020 Parameters: Control system: Heidenhain 640 Number of axes: 4 pieces Minimum vertical spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Number of all tools: 24 pieces Rapid traverse X/Y/Z: 40000/40000/40000 mm/min Total power: 50 kW Machine height: 2500 mm Machine length: 3400 mm Machine width: 3110 mm Machine weight: 5250 kg Equipment: Chuck TOS UIS 200/4-1-M2; TOS UIS 250/4-2-M1
Electronic Module, Processor Module ALLEN - BRADLEY PLC - 5/20 Ethernet Processor Module ( PLC-5/20 ) 1785 - L20E/E ( 1785-L20E/E ) 96279472 A01 Dimensions: 270 x 170 x 50 mm
Bridge type Machining Centre NICOLAS CORREA EURO 2000 - 18.000 rpm - capacity 2000x1250x650 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x1000 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 1250 mm, Vertical travel z axis: 650 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 30.000 mm/1, Rapid feed x-y-z axes: 30.000 mm/1, Spindle taper type: HSK 63, Automatic tools change nr.: 40, Spindle speed: 0- 18.000 rpm, Spindle motor power: 20 Kw, Cnc: SELCA 4045, Approx net weight: 20.000 Kg, Accessories: through-spindle coolant, chip conveyor
Spray-on gouing machine for rigid box mounting X-Y CNC Make Dalian Jori Model ZH500 Year 2018 Min size 30 x 30 mm Maximum size 500 x 1000 mm Thickness 1 - 3 mm Details after manual placement of the cases the machine can start to spray on a pattern of glue onto the cases, after the operator can place manually a rigiid box onto the case. there are 2 types of heads, , can do circular forms, Available direct
X5 pipeline for pumped food inspection. X-ray inspection Year of manufacture 2019 the device has exactly 12 operating hours and is as good as new The X5 pipeline is perfect for inspection of a wide range of pumped and free flowing applications such as poultry, meat, slurries and sauces. The system, which is available with product pipes of 2.5, 3 and 4”, is capable of offering excellent detection of a wide range of contaminants including all metals, bone, glass, stone and dense plastics. The devices are in excellent condition and were replaced due to software changes. The maintenance was always kept, the devices are 10 years old, operating instructions see attachment. Find more here - / Contact us at -
2000 HAIDA INTERNATIONAL D-E 702-3000K40 Testing chamber Find more here - / Contact us at -
he KARG 2/S is a double twist bunching machine designed for the wire and cable industry. Manufactured by KARG, this machine is utilized for twisting multiple wires or strands together to form cables or bundles, a critical process in cable production. In the context of a 2000 KARG II-S, it is likely a model from the year 2000, serving a similar function in the wire and cable manufacturing sector. For detailed specifications and capabilities of this specific model, consulting the manufacturer´s documentation or contacting them directly would provide the most accurate information. The following accessories are available: Gear set shown in a picture for common lay lengths, see Excel file 7-fold roller set as used in the video On request, about 10 drawing dies made of carbide with signs of wear, which would first have to be reworked by the customer Operating instructions etc... We com ...
Siemens Sinumerik 828D control system with ShopMill Travel X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 min-1 Tool magazine for 24 Wkz. SK 40 IKZ Conveyor Measuring Sensors
500 Liters Cylindrical Standing Stainless Steel Tank Polished interior Hinged lid on the top floor Cone
approx. 500 litres stainless steel container Type: Flow tank Content: approx. 500 litres Technical specifications : Swimmer V2A Dimensions approx: Diameter outside 1,180 mm, cyl. Height 500 mm, total height 1,000 mm Outlet DN 65
200 litre stainless steel tank Manufacturer : Ahrens & Bode Pressure vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Metrics: ca. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65 Documents: Nameplate
200 litre stainless steel tank Content: 200 litres Technical specifications : single-walled container, open at the top
Air blower for Horizon MC 8, totally overhauled by Ryobi rep. and in as new condition- ready for production. Can ship worldwide.
Inv. Num. : 8205 Type: Pratica GLP Producer: Bottero Created: 2015 Parameters: Max. workpiece dimensions: 3150 x 1415 mm Number of axes: 3
- Maximum paper size: A3 (up to SRA3 format) - Functionality: Multifunction finishing for creasing and cutting - Applications: Ideal for business cards, brochures, and other printed materials - Efficiency: Precise cutting and creasing for quick and accurate workflow
Manufacturer JOHNFORD Model SV-41 + APC – pallet changer Year of manufacture 2007 CNC FANUC 18i MC.2 Table dimensions 1,200 x 600 mm Maximum weight allowed on table 1,200 kg Travel (X / Y / Z) 1,050 / 610 / 610 mm Distance from nose spindle to table 100-700 mm. Distance from spindle center to column 640 mm. Fast feed (X,Y axes) 30,000 mm./min. Fast forward (Z-axis) 20,000 mm./min. Work progress 12,000 mm/min. BT-40 Spindle Cone Maximum spindle speed 60-10,000 rpm Spindle power 7.5 / 11 kW Automatic tool loader Charger type Bidirectional RANDOM Tool loader positions 20 Maximum tool diameter 100 mm Maximum tool length 320 mm Maximum tool weight 10 kg Equipment Internal cooling 20 Bar INCLUDED 2 longitudinal chip evacuators INCLUDED 1 x Cross Chip Evacuator INCLUDED Air conditioning in electrical cabinet INCLUDED Portable steering wheel INCLUDED Automatic pall ...
Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h - ...
CNC processing centre Brand: IMA Type: BIMA 310V 120/600 Year: 2004 Technical data: Machining area - in X-direction without gluing 6000 mm - in X-direction motor gluing 5000 mm - in Y-direction 1200 mm - in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm max. clamping height from Upper edge of suction plate Z1 100 mm max. workpiece thickness Z 2 depending on equipment/application Worktable height: approx. 950 mm 1 main spindle with feed stroke pneum. - Drive power: 12 kW in S-1 operation - Tool holder: HSK F63, taper diameter =38 mm - Tool feed: automatic - Pull-in force: 11000 N - Tool weight: max. 6 kg - Direction of rotation: right/left rotation, programmable - Speed range: stepless 1500 - 24000 rpm, programmable - Drive: frequency-controlled three-phase motor Spindle lubrication: unique factory grease lubrication - spindle cooling: water cooling ...
Inv. Num. : 8226 Type: VC 810 Producer: Spinner Created: 2005 Parameters: Control system: Siemens Work table length: 1000 mm Work table width: 600 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 800 mm Y-axis travel: 600 mm Travel Z-axis: 510 mm Machine height: 2600 mm Machine length: 2400 mm Machine width: 2200 mm Machine weight: 6000 kg
Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min
maximum number of results exceeded
please refine your search
