136,886 used machines on RESALE, but how to find them? Machine Search
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50799-418
Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46142-1294
200 bar / 200 L / 180 degrees Brand: Kärcher Range: Professional Type: Hot Water Pressure Washer Series: HDS Mounting: movable on wheels Visible equipment: high-pressure gun, high-pressure lance and hose Heating: integrated boiler/burner to produce hot water Visible reference: 4.640-141.0 Coil Part Number: 4.680-135.0 Auction-ID: A3-46142-35906
An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-262
garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A3-46142-1285
MKS 600 Series Pressure Controller (10 Torr) Type 252 Exhaust Valve Controller Type 152 Automatic Pressure Controller Baratron 390HA-00100SP12 (100 Torr) Valves & Actuators Tags HP Lamination Auction-ID: A1-51157-19
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-136
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-39
An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-62
Batch used various manual high-pressure valves (Rotarex / Tescom / Veriflo / GTC) incl bucket Auction-ID: A1-50936-273
Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50799-300
Used Mbraun vov-1250 vacuum pressure vessel / vacuum boiler, without trolley Auction-ID: A1-50936-31
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-249
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50799-347
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50798-224
With buffer tank; with water meter; engine brand Elmot Schäfer 2.2kW; on pallet Auction-ID: A1-50864-55
Plot has been tested for operation Auction-ID: A1-40164-10
Code: 0504 Brand: ORMAMACCHINE Model: NPC 4/40 Hydraulic cold press for panels, furniture, woodworking shops, custom-made furniture, doors, composite materials, aluminum, and various other applications Sturdy structure Platens dimensions mm 2500 x 1200 covered with new aluminum sheets N° 4 pistons Total thrust 40 tons Motor Hp 2 Perimeter emergency cable Overall dimensions mm 3000 x 1450 x 2100 h Weight kg 2200
Power (ton) 200 Table dimensions ( x-y/mm) 1400 x 800 Slide Dimensions X-Y (mm) 900 x 600 Stroke (mm) 20 - 200 Slide Adjustment (mm) 120 Light at T.D.C.(mm) 600 Strokes type fixed Stroke per minute 45 Motor Power (kw) 15 Type of security hydraulic overload Accessories Millutensil feeding straightener and Cattaneo decoiler
Has N2 Nitrogen been in; Test pressure 16.5 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-196
MATABOSCH H-6 – Hydraulic Vertical Baling Press Manufacturer: J. Matabosch S.A. Model: H-6 Year of Manufacture: 1985 Country of Origin: Spain Condition: Used Technical Specifications Description Specification Manufacturer J. Matabosch S.A. Model H-6 Machine Type Vertical Hydraulic Baling Press Year of Manufacture 1985 Pressing Force 10 Tons Motor Power 2 HP (CV), approx. 1.47 kW Electrical Supply 380 V Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Chamber Hydraulic Cylinder Vertical Operation Manual Hydraulic Controls Bale Ejection To be confirmed Machine Serial Number 2676 Construction Heavy-Duty Steel Frame Manufacturer Location Barcelona, Spain Auction-ID: A1-51153-101
SCHULER mechanical eccentric press, approx. 25 ton according to visible plate. Foot pedal and lubrication unit visible. Older machine, condition as shown; safety equipment and operation must be checked before use. Auction-ID: A1-51153-15
Case IH Puma 240 CVX 4WD tractor – 2019 – 9,475 hrs – Dutch registration Specifications: Brand/type: Case IH Puma 240 CVX Year of construction: 2019 Engine: 6-cylinder diesel engine Power: approx. 177 kW / 240 hp Hours: approx. 9,475 hours Transmission: CVX, stepless Top speed: 50 km/h PTO: 540/540E/1,000/1,000E rpm Front tyres: Trelleborg 600/60R30 Rear tires: Trelleborg 710/60R42 Weight: approx. 12,000 kg Technical total weight: approx. 14,000 kg Dimensions l x w x h: approx. 560 x 255 x 325 cm Features: 4WD Suspended front axle Cab suspension Air conditioning Leather cab upholstery Grammer Dual Motion Driver's Seat AFS touchscreen Front linkage management GPS Preparation Cruise control Radio Front linkage Front PTO K80 Clutch Drawbar Tipper knob in the carriage Double-acting hydraulic valve on the front 3-pin plug on the front 7-pin plug ...
Galvanized metal; equipped with lifting eyes Auction-ID: A1-50864-92
1. Ford Gasoline Pressure Washer Gasoline-powered Ford pressure washer, model FPWG33400H, suitable for cleaning patios, driveways, vehicles and machinery. Equipped with a powerful motor, mobile frame and several interchangeable nozzles. Maximum working pressure approximately 234 bar (3,400 PSI) and water output approximately 10 liters per minute. 2. Hyundai Gasoline Pressure Washer Hyundai Power Products pressure washer, model 57535, with a maximum working pressure of 207 bar. Suitable for a variety of cleaning tasks around the house, workshop and company premises. Equipped with a mobile frame, high-pressure hose and spray gun. 3. Unbranded gasoline pressure washer Hyundai petrol pressure washer with a 170 cc engine, a power of approximately 6.5 hp and a maximum pressure of 2,500 PSI (approximately 172 bar). The machine has a water output of approximately 34 liters per minute according t ...
On adjustable tripodLot is equipped with flange valves and wall-mounted pressure gauge Auction-ID: A1-50864-80
HSM 18 – Vertical Hydraulic Baling Press Manufacturer: HSM Pressen GmbH, Germany Model: HSM 18 Machine Type: Vertical Hydraulic Baling Press Year of Manufacture: 1981 (identification plate) Condition: Used Technical Specifications Description Specification Manufacturer HSM Pressen GmbH Model HSM 18 Pressing Force 18 Tons Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Door Bale Ejection To be confirmed Compression Chamber Heavy-Duty Steel Construction Electrical Supply To be confirmed Hydraulic Power Unit Integrated Control System Push-Button Controls Safety Mechanical Door Locking System Machine Number 180 071 Year 1981 Inventory Number 644987 Auction-ID: A1-51153-97
Used REIS 4-column hydraulic press / try-out press. 380 V, 50 Hz, serial no. 02037 visible on plate. Large working area, hydraulic unit and control panel included. Condition as shown in photos; capacity and full specifications to be confirmed. Auction-ID: A1-51153-3
Different brands: sayer, Reigter, Leitenberg, Man and Gesa. Auction-ID: A1-47450-2056
Test pressure 16 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-91
Tank capacity is 2000 liters; Lot is sold up to 1st flange coupling; equipped with lifting eyes Auction-ID: A1-50864-79
Hydraulic die spotting press for assembly, adjustment, inspection, maintenance and testing of large moulds and dies. Year 1991. Serial no. 635/2036. Useful platen dimensions approx. 2,000 × 1,500 mm. Distance between columns 2,130 × 1,630 mm. Vertical stroke 1,200 mm. Maximum closing force 1,500 kN (approx. 150 t). Maximum opening force 350 kN (approx. 35 t). Adjustable hydraulic pressure 0–250 bar. Maximum load on lower platen 30,000 kg and upper platen 15,000 kg. Upper platen rotation 100° and lower platen rotation 70°. T-slots 22 mm, DIN 650. Lower platen height from floor 770 mm. Rapid approach speed 65–80 mm/s, working speed 8 mm/s and return speed 35–50 mm/s. Main motor power 11 kW, auxiliary motor 1.1 kW, total installed power 12.1 kW. Electrical supply 380 V / 50 Hz. Approx. overall dimensions 6,150 × 2,130 × 4,700 mm. Approx. machine weight 27,000 kg. Equipped with o ...
Mobile pressurised tank set with pump, hoses and accessories. Plate visible: type SCO/50, 50 L, 8 bar, year 2004. Sold as a lot; condition and pressure certification to be checked by buyer. Auction-ID: A1-51153-83
proof pressure 16.2 bar; equipped with lifting eyes Auction-ID: A1-50864-67
Tank capacity 5000 liters; proof pressure 15.73 bar; equipped with lifting eyes Auction-ID: A1-50864-82
225x127x155 No keys available for shutters No coc present Trailer 750kg Auction-ID: A3-46140-11445
pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...
pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...
pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...
pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden
pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden
pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden
pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic
pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m
pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250
maximum number of results exceeded
please refine your search
270 € 
