cheese press used for sale

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 2324.7 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 3109.05 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 46400 € : 886.24 € : 100 to : 500 mm : 700 x 350 mm : 800 x 600 mm : 500 mm : 300 mm : 25 mm/s : 4 mm/s : 4 kW : 1900 mm : 1200 mm : 2600 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 28800 € : 550.08 € : 20 to : 1.7 mm : 360 mm : 550 mm : 140 mm : 1 - 50 mm : 160 1/min : 4 : 40 mm : 35 mm : 200 mm : 240 mm : 2.2 kW : 1360 mm : 1100 mm : 1860 mm : 1250 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting periphera ...

: neu : 2026 : 070125 : prompt, Zwischenverkauf v : Türkei : 40200 € : 767.82 € : 1 : 40 to : 2.5 mm : 450 mm : 650 mm : 150 mm : 1 - 80 mm : 125 1/min : 4 : 75 mm : 40 mm : 225 mm : 300 mm : 835 mm : 4 kW : 1350 mm : 1370 mm : 2330 mm : 2100 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual rammer adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free ...

Manual ham press in stainless steel, Volume approx. 90 litres, with 3 plastic boards, 33 stainless steel brackets, Total dimensions LxWxH approx. 70x40x90cm, weight approx. 63kg, good used condition

- Total installed power 1.80 KW. - 3 x 2 vertical pressure cylinders. - 2 x 2 horizontal pressure cylinders. - 2 independent work areas. - Maximum pressing dimensions approx. 2350 x 600 x 1200 mm. - Working pressure: 0-100 kg/cm². - Operating conditions of this machine: unchecked. - Dimensions for transport approximately XXXX x XXXX x XXXX mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-4

press pressure: 1500 KN, punch surface: 1700 x 75 mm, passage width: 1730 mm, passage height: 40-160mm, 1x spare base plate Auction-ID: A1-50060-13

Builder: Ter Hart/Nubec // Control: A+A Schoenmakers, equipped with digital piece counter and emergency stop protection, with transport cart and Perfo blocks Auction-ID: A1-50060-36

Extension: 130mm, including 1x box Nesting (GA51/54)+ Stamps, various colors Auction-ID: A1-50060-159

Execution: 130mm, including 2x box of snaps, nickel, bronze and black Auction-ID: A1-50060-166

including 2x box of Nestles VL 31, gold, nickel, bronze, Tie + stamp Auction-ID: A1-50060-162

Extension: 130mm, including 3x box with pushers Auction-ID: A1-50060-158

Builder: Ter Hart/Nubec // Control: A+A Schoenmakers, equipped with digital piece counter and emergency stop protection. including table with perforated blocks Auction-ID: A1-50060-34

Output: 130mm, including 2x box, including: R6-10 staple/studs, R6-7+ stamp, various colors Auction-ID: A1-50060-164

Builder: Ter Hart/Nubec // Control: A+A Schoenmakers, equipped with digital piece counter and emergency stop protection. Including table with perforated blocks Auction-ID: A1-50060-35

press pressure: 630KN, standing surface: W1600 x D650mm, equipped with laser curtain protection, with spare base plate Auction-ID: A1-50060-1

2x SIPOCH HF Series 300 mL High-Pressure Metering Pump Systems Manufacturer/Brand: SIPOCH Series: HF Series Pump capacity: 300 mL Quantity: 2 units Control: Unitronics Vision120 Equipment type: High-Pressure / Precision Liquid Metering Pump Systems Location: 91701 Trnava Two stainless-steel high-pressure precision liquid pumping systems formerly used by GA Drilling. The units are identified as HP.Pump.3 and HP.Pump.5 and are equipped with Unitronics Vision120 programmable operator interfaces. Identification / markings: HF Series Pump 300 mL MEG VTX-P25SEY04 Unit labels: HP.Pump.3 and HP.Pump.5 Asset references: Z0000840 / 20IM0011 and Z0000531 / 16IM0031 Equipment: Unitronics Vision120 programmable operator interfaces Dual stainless-steel pump heads High-pressure stainless-steel tubing Valve and manifold assemblies Associated tubing and cabling Condit ...

DRUKOV BRNO 2,000 L Pressure Vessel Manufacturer: DRUKOV BRNO Equipment type: Pressure Vessel Year: 2015 Serial number: 18616 Location: 91701 Trnava Industrial pressure vessel with a nominal volume of 2,000 litres. Manufactured in accordance with pressure equipment requirements and CE marked. Technical specifications: Volume: 2,000 L Maximum allowable pressure (PS): 16 bar Test pressure (PT): 23 bar Maximum allowable temperature (TS max.): 50°C Minimum allowable temperature (TS min.): 0°C Weight: 575 kg Fluid group: 2 Year of manufacture: 2015 CE marking: CE 1015 Condition: Used extensively over a long period. Reported to have been working when last used. Current operational condition and pressure certification status have not been verified. Auction-ID: A1-50694-118

Press pressure: 300 ATM, with oil pump unit, including rack with 6 outrigger plates, plate size: L1370 x W660 mm Auction-ID: A1-50060-11

Extension: 130mm, including 3x box Nesting (1450R) + Stamps, various colors Auction-ID: A1-50060-160

press pressure: 1500 KN, punched surface dimension: L1700 x W1065 mm, equipped with Sick optik electronik personal laser curtain protection, 1x oil pump generator and safety fencing, 1x spare base plate Auction-ID: A1-50060-12

Key data: 200 t

Manufacturer: Müller Model No.: CE 200.1.1 Year: 1972 Condition: Used Stock number: 9604 Compressive force: 200 t

Hochdruck-Systeme HPTC130-300 ISO High-Pressure Testing System Manufacturer: Hochdruck-Systeme GmbH Model: HPTC130-300 ISO Year: 2011 Equipment type: High-Pressure Testing System Certification: CE marked Location: 91701 Trnava Industrial high-pressure testing system designed for pressure testing of components under controlled pressure and temperature conditions. Equipped with high-pressure test chambers, hydraulic power unit, pressure gauges, electrical controls and associated high-pressure tubing. Technical specifications: Working pressure: 1,300 bar Test pressure: 2,240 bar Chamber volume: 1.08 L Operating temperature range: 18–300°C Maximum clamping force: 15,000 kp Equipment: High-pressure test chambers Hydraulic power unit Pressure gauges Electrical control system Associated high-pressure tubing Condition: Used only a few times and reported to  ...

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 1600 MT Built: 1996 Billet dia.: 6”, 157 x 560 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 110 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 75 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 900 MT Built: 2007 Billet dia.: 5”, 127 x 390 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 90 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 7 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg Auction-ID: A1-50718-39

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-64

LVD PPEB 220 Hydraulic Brake Type: Industrial Hydraulic Press Brake Brand: LVD Model/series: PPEB Bending force: 220 tons Control: Numerical / Electronic Control Actuation: Hydraulic Use: bending and forming of sheet metal and metal parts Marking: CE Manufacture: LVD Company N.V., Belgium Please note that the tools are not included in the sale Auction-ID: A3-46137-35248

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-63

Submersible pressure priming pump 5900/4 for watering work, even for water extraction from great depths up to 12 m. With up to 5900 l/hr and a working pressure of 3.5 bar, this powerful submersible pump can run up to three large nozzles simultaneously. Thanks to the small diameter of 149 mm, it is very suitable for use in wells with a diameter of 150 mm. Included: 20 m long fastening cord and the 15 m long connection cable. The 5900/4 stainless steel pump is equipped with a robust stainless steel housing and a stainless steel connection. This protects the pump during underwater operation and ensures stability. Thanks to the large volume filter, the pump and the connection equipment do not become clogged or damaged The pump can also be used with a floating suction set, when sediments form on the bottom. . Thanks to the float switch, the pump is protected when the reservoir is empty; This  ...

Standard configuration Machine ⦁ Box frame ⦁ Press beam ⦁ Spherical bearing of the press beam with press beam tilting ⦁ Electro-hydraulic upper drive ⦁ Block hydraulics ⦁ Distance measurement system (Y axis) with dynamic deflection compensation ⦁ Hydraulic oil filling (life-long filling) ⦁ Oil cooler Crowning ⦁ Self-regulating, combined crowning Backgauge ⦁ Gauge fingers (2 pieces) Tool clamping ⦁ Manual upper and lower tool clamp Control ⦁ T3500T Multi-Touch machine control ⦁ Integrated TRUMPF technology data Data transmission ⦁ USB interface ⦁ RJ45 network interface Operation ⦁ Operating unit with foot switches Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Crowning ⦁ CNC crowning Backgauge system ⦁ 5-axis backgauge system : R1, Z1, Z2, X1, X2 (Delta X) Tool clamping ⦁ Hydraulic upper tool clamping Contr ...

Offer 26338 Technical data: - max. Working length 3340 mm - Column passage 2600 mm - Max. pressing force 100 t - Projection 400 mm - Max. stroke 100 mm - max. Installation height 370 mm - Table height approx. 960 mm - Feed speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 9.5 kW - Space requirement approx. W 3500 x H 2350 x D 1950 mm - Weight approx. 6.8 t - with: - CNC control DELEM DA 58 - Back gauge 0 - 600 mm

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with hydraulic power unit. Power supply: 400 V, three-phase. Motor power (per nameplate): 2.5 HP. Control system: Electrical cabinet with Siemens LOGO! mini PLC. Weight (per nameplate): 1,500 kg.

COMET SC 145 floor cleaning brush, an accessory for pressure washers. Compatible with Comet KRM and Comet KRS models. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-42

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with a built-in 15-ton hydraulic power unit. Operating mode: semi-automatic. Power supply: 400 V, three-phase, 50 Hz. Motor power: 4 kW. Controls: digital pressure regulation; downward, upward, and rapid traverse movements. Weight (per nameplate): 700 kg. According to the section of the manual covering intended use, this configuration is designed for compressing filters with a diameter of 210 mm and a height of 1,090 mm.

Number of conrods 2 Table dimensions ( x-y/mm) 3700 x 2200 Stroke (mm) 600 Slide Adjustment (mm) 250 Light at T.D.C.(mm) 1400 Stroke per minute 3-12 Motor Power (kw) 135 Accessories frontal moving bloster Cushion number 3 Cushion type pneumatic Cushion stroke (mm) 200 Cushion power (ton) 50 x 3

Used frame assembly press (model N1071/1253) for assembling wooden frames, carcasses, panels and glued timber parts. - Hydraulic clamping system - Motor: 3 HP / 380 V - 4 vertical cross members (traverses) - Useful working dimensions: height 1.5 m, width 3.25 m - Overall dimensions: height 2.80 m, length 3.80 m, depth 1.10 m - In working condition Auction-ID: A7-50988-157

70mm head Auction-ID: A1-50476-128

GECHTER 8/12 HKPV toggle press. Condition: Condition as shown in the photographs. The machine is offered in untested condition. Missing or damaged parts may be present. Completeness, functionality and quality have not been verified. Auction-ID: A1-50992-4

Equipped with high-pressure cleaner; Auction-ID: A1-50476-185

Wet carpet cleaning pad model JET 5 for pressure washers, with 2 nozzles and an aluminium pole, supplied with hose. Brand is not confirmed for this specific unit. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-47

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46137-1251

Foot control, Auction-ID: A1-50476-13

GECHTER 8/12 HKPV toggle press. Condition: Condition as shown in the photographs. The machine is offered in untested condition. Missing or damaged parts may be present. Completeness, functionality and quality have not been verified. Auction-ID: A1-50992-3

garage press Type: Hydraulic Workshop Press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 98 kg Condition: Unused Auction-ID: A3-46137-1264

\" ELMALI EHSP-150 Hydraulic Deep Drawing Press Manufacturer: Elmali Makina Sanayi ve Ticaret Ltd. Sti. Model: EHSP-150 Machine type: Hydraulic Deep Drawing Press Year: 2021 Serial number: EHSP-150/150 S.01 Certification: CE compliant Working hours: 0 h Heavy-duty hydraulic press designed for deep drawing, stamping and forming of sheet metal. The machine is reported as never used, with 0 working hours. Equipped with ELMALI touchscreen control, separate control cabinet and remote operator station. Technical specifications: Press force: 150 tons Motor power: 30 kW Table / ram dimensions: 1,000 × 1,200 mm Stroke: 600 / 250 mm Hydraulic oil: ISO VG 46 Approx. dimensions (L × W × H): 2,200 × 1,900 × 4,300 mm Machine weight: Approx. 10,500 kg Equipment: ELMALI PLC touchscreen control Separate operator control cabinet Remote operating station Hydraulic po ...

GECHTER 8/12 HKPV toggle press. Condition: Condition as shown in the photographs. The machine is offered in untested condition. Missing or damaged parts may be present. Completeness, functionality and quality have not been verified. Auction-ID: A1-50992-5

NILFISK Autobrush 6411131, a car cleaning brush accessory for pressure washers. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-43