cheese press used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : fix : 1500 mm : 300 mm : 1520 mm : 680 mm : 10 mm/s : 5 mm/s : 6 mm : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2275 mm : 2500 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand operating panel Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 2.700 kN injection volume: 6.000 cm³ screw diameter: -- mm platen size: 560 x 630 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 2.700 kN - Platen size: 560 x 630 mm - Max. stroke: 550 mm (see data sheet) Injection unit: - Max. injection volume: 6,000 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Motor power: 28,2 kW - Installed heating capacity: 49,9 kW - Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 1,860 kg Total weight approx.: 10.600 kg - For dime ...

Key data: 163 t

Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 t. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm and a stroke of 700 mm, making it suitable for forming, straightening, pressing, press-fitting and assembly work in industrial use. Technical data + information: Hydraulic 4-column press – 163 T – 2,000 × 1,400 mm General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4 160-K3 - Machine number: 1606.18 - Year of construction: 2015 - Press force: 163 t - Nominal force: 1,600 kN - Table size (usable area): 2,000 × 1,400 mm - Plunger plate size: 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,300 mm - Stroke: 700 mm - Front passage: 2,010 mm - Side passage: 900 mm - Total height ...

clamping force: 4.500 kN injection volume: 3.300 cm³ screw diameter: -- mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 600 mm (see data sheet) Injection unit: - Max. injection volume: 3,300 cm³ - Injection pressure: 2150 bar - Power supply: 3x 400 V, 50 Hz, N - Motor power: 35,5 kW - Installed heating capacity: 73,9 kW - Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg Total weight approx.: 16.300 kg - For dimensions, see the installation data in the appe ...

clamping force: 4.500 kN injection volume: 5.600 cm³ screw diameter: 610 - 985 mm platen size: 670 x 780 mm Condition: second-hand, Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300 Clamping unit: - Clamping unit: vertical - Clamping force: 4500 kN - Platen size: 670 x 780 mm - Max. stroke: 610 - 985 mm (see data sheet) Injection unit: - Injection unit type: ADV - Max. injection volume: 5,600 cm³ - Injection pressure: 2200 bar - Power supply: 3x 400 V, 50 Hz, N, PE - Pump capacity: 27 kW - Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.: 21,000 kg - For dimensions, see the installation data in the appendix The data for this ad w ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 € : 786.92 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5.5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combina ...

: neu : 2025 : 080091 : prompt, Zwischenverkauf v : Türkei : 51120 € : 966.17 € : 1 : 60 to : 2550 mm : Y1 / Y2 und X Achse : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 120 mm/s : 9 mm/s : 70 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table interm ...

Hydro-pneumatic corner jointing presses with support arms and new foot switches Profile height max. 140 mm Punching height max. 93 mm Punching stroke: 15 mm Press force 45 kN Weight approx. 280 kg

Centrisys decanter centrifuge set including: - a centrifuge -complete electrical cabinet -polymer preparation -eccentric pump All in perfect condition Currently in operation until the end of August 2026

Offer 26226 Technical data: - Pressure capacity 220 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table height 950 mm - Projection 450 mm - Installation height 550 mm - Drive 400 V / 18.5 kW - Floor recess - Space requirement approx. W 3500 x H 2950 x D 2000 mm - Weight machine approx. 17500 kg - Two-hand control panel with foot switch - Back gauge adjustable from the front by handwheel - Various bending tools

Press Gierlich P6000 Year of manufacture 1976

The technical specifications of the Elektror HRD 16T FU-115/4.0 fan include: Volume flow: Up to 97 m³/min Pressure: 21,000 Pa

Key data: 300 t

Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine Type: Hydraulic Press Year of Make: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table surface: 2,000 × 1,550 mm Plunger area: 2,000 × 1,540 mm Passage at the front: 2,000 mm Side passage: 1,050 mm Table height: 800 mm Fast forward: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Throw pillow: no Equipment: Complete DREHER conveyor system DREHER Belt Unwinder DREHER Belt Feed DREHER belt conveyor system Hydraulic cut impact damping with parallel hold Hydraulic Rolling Blocks Tool change consoles Siemens SIMATIC control ...

Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Engine No.: A05036-02 Year of Make: 2006 Machine Type: Eccentric Press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Plunger adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected load: 100 kW Weight: 47,000 kg Throw cushion: No Condition: Used Machine loses hydraulic oil Several leaks present in the hydraulic area Clamping pins for plunger adjustment deactivated due to hydraulic leaks Sale without conveyor system Videos available on request Location: Freiburg

CONTROLS   conventional PRESS FORCES   total force (nominal): 800 to Safety distance 141 mm, maximum overrun 39 mm, rapid lowering speed 400 mm/s

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 252800 € : 600 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3100 mm : 410 mm : 700 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 280 l : 5750 mm : 2500 mm : 4000 mm : 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transp ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 69320 € : 1310.15 € : 100 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 500 mm/s : 900 mm : 104 mm : 11 kW : 4200 mm : 1670 mm : 2850 mm : 8500 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC CONTROLLED CROWNING TABLE  ...

Key data: 45 t, 2000 mm

Manufacturer: Gasparini Model No.: PBS 045 Year: 2000 Condition: Used Stock number: 9391 Compressive force: 45 t Maximum bending length: 2000 mm Machine weight: 3450 kg

pressure: 100 t Working width max.: 300 mm serial number: 55505 voltage: 380 V weight: 5000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 € : 455.04 € : 40 to : 800 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Features Volume 6000 L Material No. V2A Operating pressure 8 bar Total height 1600 mm Cylinder height 1300 mm Outer diameter 1400 mm Depth 4600 mm Description Tank crest: Flange connection for pressure fitting with piping pulled forward Front: Clapper bottom Pressure fitting Flanges with sample tap Manhole 410 x 320 Clarification drain with pressure fitting Franz Vogel Rear: Clapper bottom Underbody: Residual drain pipe with angled seat valve DN50 2 bearing cups

: neu : ca. 4 Monate ab Auftragse : Italien : 70000 € : 1323 € : 300 to : fix : 500 mm : 1500 mm : 20 mm/s : 2 mm/s : 2800 mm : 1500 mm : 3200 mm : 6000 kg table with integrated cylinder to lift the workpiece control by levers as well as control panel (2- hand) regulable maximum pressure Manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Extruion Press Mfc.: UBE Force: 2750 MT Type: Horizontal, Oil hydr., Built: 2017 Stopped: 2025 Billet size: Ø 254 × 1000 mm Length Speed press go out: 20 ㎜/sec Empty vehicle forward one cycle: 20 sec Output-theoretical cycle time: 160 sec

pressure: 35 t no. of strokes: ca 72 Hub/min dayligth: 195 mm total power requirement: 1,5 kW weight of the machine ca.: 330-400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 € : 504.24 € : 1 : 40 to : 1500 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2000 mm : 950 mm : 1900 mm : 1800 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 202100 € : 3869.08 € : 320 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 1100 mm : 154 mm : 160 l : 7500 mm : 1910 mm : 3350 mm : 29000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and  ...

A valve for regulating the flow and pressure of a hydraulic system. Model A: max flow rate of 60l/min, factory set pressure at 140 bar. The set pressure can be increased up to 220 bar.

Hydraulic Flow and Pressure Control Valve14 Model B: max flow rate of 114 l/min, pressure set at the factory at 140 bar. The set pressure can be increased up to 220 bar.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 € : 982.8 € : 150 to : fix : 1250 mm : 500 mm : 700 mm : 1500 mm : 20 mm/s : 10 mm/s : 3 mm/s : 1200x700 mm : 1250x400 mm : 2400 mm : 1200 mm : 2800 mm : 5200 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

: neu : ca. 4 Monate ab Auftragse : Italien : 160000 € : 3024 € : 300 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 3550 mm : 4000 mm : 2600 mm : 15000 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.800 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 38000 € : 725.8 € : 100 to : fix : 1250 mm : 500 mm : 780 mm : 1500 mm : 25 mm/s : 10 mm/s : 4 mm/s : 1300x600 mm : 1250x400 mm : 2400 mm : 1200 mm : 2450 mm : 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

Features Volume 10600 L Material No. V2A Working pressure 2 bar Operating temperature range 2 C Total height 3900 mm Diameter 2000 mm Description Topsoil: Clapper bottom/ curved back Threaded connection DN32 Ladder hooks Cylinder: Level indicator with DN20 hose Manhole oval 440 x 340 Sample tap DN15 CIP line with airflow valve with pressure relief valve and pressure gauge with Disc Valve DN20 with T-Piece with Disc Valve DN32 Underbody: Clapper bottom/ curved back Central outlet with residual drain pipe pulled forward with disc valve DN65 flush with the tank wall 4 profile feet with calottes - height adjustable

Features Volume 10000 L Material No. V2A Working overpressure range 2.5 bar Operating temperature 2 °C Total height 3900 mm Diameter 2000 mm Description Topsoil: Clapper bottom/ curved back Threaded connection DN32 Ladder hooks Cylinder: Level indicator with DN20 hose Manhole oval 440 x 340 Sample tap DN15 CIP pipeline with airflow valve with pressure relief valve and pressure gauge with disc valve DN20 with T-piece with disc valve DN32 Underbody: Clapper bottom/ curved back Central outlet with residual drain pipe pulled forward with disc valve DN65 flush with the tank wall 4 profile feet with calottes - height adjustable

Features Operating pressure 3 bar Operating temperature 20 °C Material No. V2A Total height 3900 mm Diameter 2000 mm Volume 8000 L Description Topsoil: Clapper bottom/domed back Central connection DN25 threaded weld-on socket with CIP performance Cylinder: Level indicator with plastic hose DN25 Manhole oval 450 x 350 Sample tap DN15 Threaded Weld-on Socket with CIP Pipe with Fermentation Spun Valve with Pressure Gauge with Cross Piece with Disc Valve DN25 Underbody: Clapper bottom/ curved back Central outlet DN65 with residual drain pipe pulled forward with disc valve DN65 flush with the tank wall 4 trumpet feet with domes - height adjustable

Features Volume 10160 L Test pressure 4.3 bar min./max. operating pressure (hp) 3 bar min./max. operating temperature (TS) +50/-10 °C Total height 4100 mm Diameter 2050 mm Vertical design Surface inside 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom/ curved back 2 crane eyes Cylinder: Level indicator with DN20 hose with bar and scale with DN20 disc valve Ladder hooks Manhole oval 440 x 340 Sample tap DN15 Airlock sheet pile DN40 with pressure relief valve with airlock connection Underbody: Clapper bottom/ curved back forward-drawn residual drain pipe with DN65 with disc valve 4 profile feet with carrots - height adjustable

Features Volume 3000 L Material No. V2A Total height 3150 mm Diameter 1300 mm Operating pressure 2 bar Description Topsoil: Clapper bottom/curved back CIP Cleaning with CIP Ball Cylinder: Level indicator with hose 20 mm Manhole oval 440 x 350 Sample tap DN15 Fermentation pulp valve DN32 with pressure gauge with cross connection with disc valve DN32 Underbody: Clapper bottom/ curved back Forward-drawn pipe with disc valve DN65 3 profile feet with calottes - height adjustable

Qty. 1 Second-hand extrusion press Mfc.: TBA Force: 85 MN Type: Loading Single action short stroke Built: 2026 – Never used! Billet dia.: 520 mm x 900 - 1800 mm L Ready for painting according to buyer’s requirement. Ready for shipment! All missing parts of the complete line can be also quoted, if requested. SCOPE OF SUPPLY 85 MN short stroke single action direct extrusion press Hydraulic type loader Billet-transfer loader Scrap-transfer device Billet lubrication device Extrusion tool Scrap Knocker Die shuffle Die Pusher Hydraulic System Electric System Spare parts

Manufacturer: Trumpf Year of Manufacture: 2005 Model: TrumaBend S 700-45 Type of Machine: CNC Hydraulic Press Brake Technical Specifications: - Working Length: 4,550mm - Pressing Force: 7,000 kN (approximately 700 tonnes) - Weight: 49,000 kg - Oil Quantity: 700 liters - Operating Voltage: 3 x 400V AC, 50Hz - Control Voltage: 24V - Control Type: ModEva 12S (Cybelec) - Main Fuse Nominal Current: 200A - Connected Load: 69 kW - Distance Between Machine Frames: 3,500mm - Maximum Bending Length: 4,550mm at a bending depth of 590mm - Bending Arm (without tool): 490mm. Obstruction edge protrudes 300mm from the bending arm. - Maximum Bending Depth at 3,500mm Length: 1,750mm for single bends, 1,250mm for Z-bends Hours are being check, but it was used in 2x shift operation. Will be available end of the year. No tools included, only the machine The machine has been running continuously for  ...

: neu : 2024 : 7306 : prompt, Zwischenverkauf v : Italien : 11800 € : 205.44 € : 1 : 10700 € : 50 to : horizontal verschiebbar : 350 mm : 900 mm : 900 mm : max. 9 mm/s : 0,75 kW : 1700 mm : 700 mm : 2100 mm : 720 kg : 550 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only ",M", versions) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 80100 € : 1513.89 € : 60 to : 350 mm : 550?850 mm : 600?1000 mm : 600 mm : 100 mm/s : 10 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2850 mm : 5350 kg : 170 bar : 24 to : 150 mm : 100 mm : 156 bar : 65 mm/sec. : 470?650 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 74100 € : 1400.49 € : 100 to : 300 mm : 600 x 900 mm : 700x1100 mm : 550 mm : 100 mm/s : 8,5 mm/s : 165 mm/s : 11 kW : 2100 mm : 2050 mm : 3050 mm : 6500 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main characteristics : • Overall dimensions: LxWxH: 2200mm. x 650mm. x 1950mm.; • Designed for shaping sausages in the drying process; • Mobile performance: movement through 6 polyamide wheels; • The pressure on the product is exerted by pneumatic cylinders located at the top of the machine; • Determination of the pressure on the product is carried out by adjusting the pressure of the compressed air supplied to the cylinders; • Compressed air connection: 1/2" (quick connection with spiral hose);

Technical data • Manufacturer: Komage • Model: S60 CNC • Year of construction: 2011 • Drive: Hydraulic • Press system: Flexible, modular press system based on the ejection method • Operating hours: approx. 20 hours • Total lifts: 3,207 For sale is a Komage S60 CNC powder press in exceptionally good condition. The machine was used exclusively for testing purposes and therefore has only approximately 20 operating hours and 3,207 strokes. The press is in near-mint condition, both technically and visually. There are no significant signs of wear. It is ideally suited for companies seeking a high-quality CNC powder press in virtually unused condition. Equipment • High-performance hydraulic powder press • CNC control • Flexible, modular press system • Ready for immediate use Find more here - .ucymachines/ Contact us at - sales@ucymachines

: neu : ca. 4 Monate ab Auftragse : Italien : 26500 € : 506.15 € : 100 to : horizontal verschiebbar : 500 mm : 700 mm : 1050 mm : 25 mm/s : 2 mm/s : 1900 mm : 1200 mm : 2450 mm : 1770 kg HORIZONTAL MOVABLE CYLINDER 600 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 25400 € : 485.14 € : 40 to : 1250 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 35400 € : 676.14 € : 40 to : 500 mm : 700x350 mm : 700x500 mm : 500 mm : 250 mm : 26 mm/s : 9 mm/s : 4 kW : 1500 mm : 1000 mm : 2500 mm : 1500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 91200 € : 1723.68 € : 100 to : 500 mm : 600 x 900 mm : 700 x 1100 mm : 750 mm : 320 mm : 100 mm/s : 8,5 mm/s : 165 mm/s : 11 kW : 2100 mm : 1900 mm : 3350 mm : 7300 kg : 240 bar : 30 to : 200 mm : 120 mm : 170 bar : 52 mm/sec. : 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57920 € : 1094.69 € : 60 to : 2050 mm : 3 (Y1, Y2, X) : 265 mm : 1700 mm : 450 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 110 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 7.5 kW : 3200 mm : 1550 mm : 2850 mm : 5600 kg : 650 mm 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double l ...