cheese press used for sale

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: WIPA, radial fan pressure blower from friction disc friction washing system -Type: WTG75-15-500 -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm -Blower dimensions: 1000/820/H1100 mm -Dimensions of base: 805/1210/H1425 mm -Weight: 358 kg

Key data: 40 t, 2050 mm

Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control - 3 controlled axes (Y1, Y2, X) - Manual Wila crowning table - 2 adjustable support arms - Light barriers - Incl. bending tools & operating instructions - Year of construction 2008 Technical data - Pressing capacity: 40 t - Bending length: 2050 mm - Distance between stands: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Projection: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of ...

Ponscapaciteit: 80 ton Diameter x plaatdikte: 40 x 15 mm / diameter 60 x 10 mm Keeldiepte: 510 mm Maximale snijdikte in plaat: 500 x 20 mm / 400 x 19 mm Bladlengte: 510 mm Hoekstuk van 90° afgesneden: 120 x 120 x 13 mm Hoek van 45° afgesneden: 90 x 90 x 10 mm Rond op lengte snijden: 45 mm Op maat gesneden vierkant: 40 mm Maximale materiaaldikte door inkepingen: 90 x 10 x 13 mm Length: 1800 mm Depth: 900 mm Height: 1800 mm Weight: 2380 kg

Shelf press for veneering SIPA 2500×1280 Shelf length 2500mm Shelf width 1280mm Load height 440mm Operating pressure 120bar Press on 4 cylinders Shelves heated with boiler water

A Bucher pneumatic horizontal membrane tank press for the food industry is available. Nominal volume: 100hl, max. throughput capacity (grapes): 6000kg/batch, machine dimensions X/Y/Z: approx. 6300mm/2200mm/2250mm, weight: approx. 5000kg. Including central filling and drip tray. An on-site inspection is possible.

Manni 2500×1300 veneer shelf press Shelf length 2500mm Shelf width 1300mm Load height 410mm Working pressure 300bar Press on 4 cylinders Net price

Manufacturer: Boschert Model: Profi 56/2200 T Type of machine: CNC press brake Year of manufacture: 2014 Operating hours: 1984 hours Control system: License-free Cybelec SA control system. Included tooling: An extensive, original premium tool set from a well-known manufacturer,supplemented by a complete, immediately usable tooling package. Upper and lower tools 3 to 10 mm, approximately 30 sets. Dies 4 to 15 mm, approximately 30 pieces. Special punches and drawing punches. Own tool cabinet included. Additional equipment included: Thread cutting device and Suhner PowerMaster. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 100 t, 2600 mm

Manufacturer: ERMAKSAN Model: Speed-Bend Pro 2600×100 Year: 2022 Condition: Used Stock number: 9340 Control system: Delem DA-66T Press force: 100 t Maximum bending dimension: 2600 mm Motor power: 11 kW Machine height: 2550 mm Machine length: 4350 mm Machine width: 2500 mm Machine weight: 6273 kg Equipments: Back stop Front Support Arms Foot control Safety Covers Bending fixtures

reflex diaphragm pressure expansion vessel Variomat VF with 3,000 l MAG from 2017 with 3,000 l capacity, Three are available, price is per piece. Manufacturer: reflex Model: Variomat VF Type: Diaphragm Pressure Expansion Vessel Serial Number: 18T02235003 Volume [l]: 3,000 Operating temperature [°C]: -10 / 70 permissible. VL temperature [°C]: 120 permissible. Operating pressure [bar]: 6 Test pressure [bar]: 9.5

Manufacturer: Neff Model: DZP630 Type of machine: Press Year of manufacture: 2020 Press force: 630 t Counter press force: 250 t Opening max: 1200 mm Press movement max: 800 mm Counter movement max: 250 mm Counter press area: 1500 x 1200 mm Press area: 1800 x 1500 mm Counter press pins diameter: 38 mm Operating Hours : 5,935 hours since February 2020 Find more here - .ucymachines/ Contact us at - sales@ucymachines

- Basket capacity: 1200l - Elastic membrane new, 2026 - Machine with integrated compressor - With central filling, ball valve NW 80 - Feet: H: 300 mm - Probes in the juice vat for cider pump control - With tester emptying trolley - Machine in very good condition, little used

- Elastic membrane in good condition - Diaphragm in very good condition - Machine with integrated compressor - With central filling, ball valve NW 80 - With Pressostat and alarm siren - Feet: H: 500 mm - Probes in the juice vat for cider pump control - Machine in good condition

The used DORST DK 100 is a robust sizing and powder compaction press designed for high-performance industrial applications. Capable of a maximum pressing force of 1000 Kn and a withdrawal force of 500 Kn, this machine provides powerful and reliable operation. It accommodates a filling height of up to 110 mm with a pressing travel of 50 mm, ensuring versatility for various compaction tasks. The upper punch stroke is 140 mm, with adjustable travel up to 75 mm, allowing for precise control over pressing operations. This model offers between 5 and 22 strokes per minute, giving you flexibility in production rates. The die return force is 100 Kn, while the supporting force in the pressing position reaches 300 Kn. Pneumatic operations are supported with an upper punch preload of up to 30 mm and compressed air consumption of approximately 80 liters per minute. It requires a total connected load  ...

High-speed rotary tablet press for the pharmaceutical industry. With integrated safety systems. CHARACTERISTICS - Exchangeable turrets - Included turrets: EU-B; EU-D - Only 900 working hours - Number of stations: 45 PRODUCTION - Single layer tablet output: 158,000 - 282,000 tablets/hour - Tablet diameter: 14 mm - Tablet thickness: 8.5 mm - Pressure: 10,000 kg - Main pressure: 10,000 kg DIMENSIONS - Footprint: 1,659 x 1,285 mm - Height: 2,044 (without hopper)/2,199 (with hopper) mm - Weight: 4,000 kg (approx)

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

Used Chamber Filter Press van Roll HV6 1200 Year: 1984 Panel format: 1200 x 1200 mm Panel material: Polypropylene Number of chambers: 50, expandable to 70 Press capacity: approx. 1650 litres, expandable to approx. 2300 litres Cake thickness: 30 mm Filter area: approx. 103 m2, expandable to approx. 144 m2 Filtration pressure: max. 15 bar Incl.: Hydraulics, light barrier, filter cloth washer, control cabinet, trough chain conveyor, technical documentation Expected availability late 2026/early 2027 Subject to prior sale - errors possible! Internal reference number: F-1226

Offer 26185 Technical data: - Max. pressing force 160 t - Max. ram stroke approx. 500 mm - Average working speed approx. 92 mm/s - Return speed 125 mm/s - Installation height approx. 1000 mm - Projection to the middle of the ram 360 mm - Plunger clamping pin 40 mm - Table size 900 x 630 mm - Table bore / breakthrough 220 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 17 kW - Space requirement approx. W 1150 x H 3400 x D 1850 mm - Weight approx. 7500 kg

Hydraulic briquetting press manufactured by UMP Technika, model BP-600A, designed for the compaction of biomass and various industrial by-products in high-density briquettes. It offers a production of up to 600 briquettes/hour and a maximum compaction pressure of 1,700 kg/cm², to process product with a maximum humidity of 15% and produce briquettes of 150 x 60 mm (base) x 40-105 mm (adjustable height). The machine works continuously and automatically, and incorporates an electrical panel with Siemens PLC, frequency inverter and hydraulic group. Technical characteristics Model BP-600A Year of manufacture 2017 Power supply 33kW 400 V 50 Hz Production 600 Kg/h Documentation Maintenance Manual Operation Manual Electrical diagrams In your state

Industrial pellet press manufactured by Bühler, model DPUC, designed for the continuous production of pellets from different raw materials. The equipment incorporates a 6 mm die and is prepared for a capacity of approximately 2.5 tons per hour, depending on the product and process conditions. The press is equipped with a roller compression chamber, conditioner for product pre-treatment and support bed. The assembly is complemented by a stainless steel worm conveyor, intended for feeding or evacuating the product in the pelletizing line. Technical characteristics DPUC Model Year of manufacture 2005 Production 2,500 Kg/h In your state

Pressure: 16 tons Table dimensions: 800 mm x 410 mm Hammer dimensions: 350 mm Maximum stroke: 90 mm Motor power: 0.9 kW Weight: approx. 500 kg Machine dimensions: 800 mm x 900 mm x 1400 mm Very fast and powerful Two-hand operation for safe use Simple and intuitive operation Machine in perfect working order

pressure: 40 t throat: 220 mm stroke: 8-88 mm stroke - stepless adjustable: 30-140 mm ram adjustment: 63 mm weight of the machine ca.: 2600 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6,3 t throat: 200 mm stroke: 200 mm dayligth: 600 mm total power requirement: 2,2 kW weight of the machine ca.: 0,78 t dimensions of the machine ca.: - m Hydraulic Press 63 kN Stroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg. Workspace: Table 450 x 380 Drive: 2.2 Movie: https://www.youtube.com/watch?v=tcxXfKlrFLY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 5 t distance between columns: ca. 300 mm table surface area: ca. 280 260 mm dayligth: ca. 200 mm ram - range of adjustment: ca. 150 mm Shipping weight: ca. 450 kg Packing: ca. 0,8 0,7 1,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 t chamfer lenght: 4080 mm distance between columns: 3680 mm column arm: 410 mm dayligth: 385 mm stroke: 215 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 200 mm table height: 1050 mm Number of working hours: 25.430 h oil volume: 350 l total power requirement: 29 KVA weight of the machine ca.: 16.450 kg. range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency ...

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATL 550 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=cp3ge7VbjTA Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front - Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crow ...

pressure: 40.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 200 mm stroke: 100 mm dayligth: 308 mm ajustment speed: 150 mm/sec working feed: 1-10 mm/sec return speed: 100 mm/sec table width: 100 mm table height: 900 mm control: DNC 60 PS oil volume: 100 l voltage: 400 V total power requirement: 5.5 kW weight of the machine ca.: 2750 kg - in checked conditions - machinevideo - https://www.youtube.com/watch?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library - CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder - 4V universal die block w ...

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...

pressure: 20.0 t chamfer lenght: 850 mm distance between columns: 850 mm back stop - adjustable: 375 + 400 mm stroke of upper beam: 196 mm dayligth: 470 mm ajustment speed: 200 mm/sec table height: ca. 900 mm total power requirement: 5.0 kW weight of the machine ca.: 2500 kg New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - https://www.youtube.com/watch?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of di ...

pressure: 90.0 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 135 mm dayligth: 180 mm throat: 350 mm working feed: 8.0 mm/sec return speed: 68.0 mm/sec work height max.: 805 mm back stop - adjustable: max. 620 mm Control: ENC 310 oil volume: 100 l total power requirement: 7.5 kW weight: 5840 kg range L-W-H: 4000 x 2040 x 2450 mm from a maintenance workshop very good conditions () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=PIiHc2e7h28 Features: - NC electro-hydraulic press brake - with DURMA NC control ENC 310 Illuminated LCD display X-axis control & value display Y-axis control & value display - Swiveling operator panel, front left - NC controlled axes: Y1/Y2 + X - NC electro-motorized backgauge (X-axis) with 2x manually adjustable backgauge fingers including lateral and height adjustment (Z+R axes) - NC electro-moto ...

pressure: 150 t chamfer lenght: 4300 mm distance between columns: 3700 mm ram stroke speed: 100 mm/sec working feed: 8 mm/sec return speed: 80 mm/sec stroke: 175 mm table height: 920 mm Control: DELEM DA 52 total power requirement: 11 kW weight of the machine ca.: 15000 kg dimensions of the machine ca.: 4800 x 1700 x 2850 mm Equipment: - Controlled axes Y1 - Y2 - X, as well as CNC crowning - DELEM DA52 CNC control - Electric backgauge (X-axis) - 4x manually adjustable stop fingers - 2x front support arms - AMADA UKB system upper tool holder - Side guard - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 120 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 90.0 mm oil volume: 230 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 10500 kg range L-W-H: 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAU ...

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm table width: 120 mm table height: 900 mm column arm: 320 mm return speed: 100 mm/sec working feed: 10 mm/sec control: Cybelec DNC 70 quantity of oil: ca. 250 l total power requirement: 11 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille) Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 440 mm working feed: 9.0 mm/sec return speed: 80.0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15.0 kW weight: 10500 kg range L-W-H: 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism - Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal  ...

distance between columns: 300 mm table length: 3550 mm table width: 190 mm table height: 800 mm distance between columns: 3230 mm column arm: 300 mm weight of the machine ca.: 12,5 t dimensions of the machine ca.: 1600 x 3800 x 2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja weight of the machine ca.: 9,5 t serial number: 10457/2 : 160000 KG stroke of worktool slide: 41 Hub/min Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t table length: 2000 mm table width: 1580 mm stroke: mm pressing speed: mm/sec voltage: 400 V return capacity: t max. table loading capacity: 10.000 / 20.000 kg total power requirement: 18 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm max.load upper table no swiveling 10t / swiveling 6t max.load lower table 22t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t table length: 1250 mm table width: 900 mm table travel: 1200 mm dayligth: 700 mm upper clamping surface:: 1000x1200 total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulM ...

number of controlled axis: . workpiece weight: . kg throat: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Position sheet metal clips 8 pieces different sizes The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3000 mm distance between columns: . mm Control: CNC type: DA 65 R stroke: 200 mm safety distance: 136 mm rapid traverse - down: 100 mm/sec rapid traverse - up: 92 mm/sec working feed: 1-10 mm/sec throat: mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...

pressure: 100 t stroke: 300 mm Cylinder: 205 mm distance between table / ram: 520 mm table surface area: 1100X350 mm ram surface: 350X350 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m with roller conveyor, 1: Roller conveyor: 2000x500 inlet 1: Roller conveyor: 2000x500 outlet The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team T ...

pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the  ...

pressure: 630 KN distance between columns: 800 mm stroke: 150 mm table surface area: 720x550 mm ram surface: 720x520 mm dayligth: 420 mm rapid drop speed: 394 mm/sec working feed: 71/17 mm/sec return speed: 390 mm/sec adjustment movement of the stroke: 120 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m Cutting impact dampening The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look  ...

pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t passage width: 1000 mm stroke: 700 mm width: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . t stroke: 500 mm daylight: 800 mm arbor support: 3000 Ram: 600x250 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Banning feed unit Adjustable supports (1300 mm each) 2 x roller conveyors (4000 x 800) Storage area (4000 x 1600) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - ...

pressure: 1000 t distance between columns: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t throat: 1140 mm stroke: 600 mm table surface area: 2000x1000 mm Plate: 4000x1000x300 mm ram head dimension: 2000x1040 mm Cylinder: 300 mm Daylight: 650 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,9x4x4,2 m Machine has been overhauled. Maximum distance from ram to clamping plate: 1250 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your  ...