136,149 used machines on RESALE, but how to find them? Machine Search
15,000 litre DEFRANCESCHI MO 150 tank press Features: Volume 15000 L Length 6500 mm Width 2200 mm Total height 3000 mm Operating overpressure 2 bar Weight 4400 kg Horizontal design
This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine.
Key data: 250 t, 4100 mm
Bystronic Xpert 250x4100 - CNC press brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2 and 3D graphics control, ergonomic operating terminal with 15-inch colour monitor - Laser safety device AKAS, manually height-adjustable - Hydraulic crowning - Air bending - Radius bending - without tools - incl. operating instructions - Year of construction 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installation height (clear height between lower and upper beam): 550 mm - Distance between side stands: 3750 mm - Projection: 400 mm - Stop range: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - Travel R-axis: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-operation: 1 - 10 mm/s - Y-operation for robot operation: 1 - 12 m ...
Diaphragm Tank Press Features Length 7300 mm Width 2400 mm Total height 3000 mm Power / Energy / Capacity 15 Tons Description Dimensions press: approx. LxWxH: 7300x2400x3000 mm Dimensions auger: approx. LxWxH: 4050x1500x 730 mm
Ref.nr 00916 Name of the system: Servo press Manufacturer: Römheld Model Servo Press 55kN Year of construction unknown Technical data (excerpt): Max. pressing force: 55 kN Stroke: 200 mm Clear width: 350 mm Clear height: 450 mm Speed: approx. 10–160 mm/s Touch panel: 12" Dimensions (W x D x H): 1,400 x 890 x 2,880 mm Weight: approx. 570 kg Degree of protection: IP55 (motor), IP65 (control/panel) Fuse: 16 A Condition: used, functional, inspection and demonstration possible by arrangement.
Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. pressure: 6 bar test pressure 7,8 bar, Max. temp.: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Base construction: vertical tank with dished bottom and pipe feet, Features: Shell-manhole, level-display-hose, tank fittings: sampler, spray ball, bunging device, pressure gauge, safety valve, vacuum flap
Two vertical, partially insulated stainless steel pressure tanks., Additional title: vertical stainless steel tanks, Volume: 5000 l, Operating pressure: 12 bar, Operating temperature: 20 °C
Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. working overpressure: 6 bar test pressure: 7,8 bar, Max. working temperature: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Position: standing on 3 pipefeet, Base construction: bottomed shells, Features: Cleaning air/valve combination, cleaning line, CIP spray head, manhole, hose level indicator, sampling tap, pressure gauge, bunging device, safety valve, vacuum flap
Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water., Additional title: coolable stainless steel pressure tanks, Volume per tank: 32400 l, Cooling surface/tank: 25 m², Perm. working overpressure: 3 bar, Systemic volume: 324 hl, Length: 2,5 m, Width: 2,5 m, Height: 7,4 m, Weight: 2585 kg, Material: stainless steel AISI 304, Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve , Periphery: Inlet and outlet pipework via double-seat valves
Pressure tank with two dished heads, central outlet and manhole., Additional title: Vertical stainless steel tank, Volume: 7366 l, Working pressure: 3 bar, Width: 1850 mm, Height: 3300 mm, Weight: 400 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, manhole, cleaning line, CIP spray head, 2-hole RLV, bunging device, pressure gauge, sampling tap, level indicator, discharge line with hand valve
Pressure tank with conical head and central outlet, additional tangentially mounted inlet/outle and manhole, upper dished head., Additional title: cylindroconical tank, Volume: 10000 l, Working pressure: 3 bar, Width: 2,3 m, Height: 4,3 m, Weight: 1000 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, additional tangential inlet/outlet, manhole
Pressure tank with two dished heads, central outlet and manhole., Additional title: vertical pressure tank, Volume: 5090 l, Working pressure: 2 bar, Width: 1500 mm, Height: 3780 mm, Weight: 700 kg
Pressure tank with two dished heads, central bottom outlet and two further lateral connections at different heights and manhole., Additional title: Vertical stainless steel tank, Volume: 10017 l, Working pressure: 3 bar, Test pressure: 4 bar, Length: 1,9 m, Width: 1,9 m, Height: 4,1 m, Weight: 850 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central lower outlet as well as additional side connection, manhole
Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting
Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping
Insulated and clad stainless steel pressure tank with various fittings., Additional title: insulated tank, Capacity: 12800 l, Pressure: 4 bar, Temperature: 20 °C, Length: 5,1 m, Width: 2,1 m, Weight: 2000 kg, Material: stainless steel, Position: hozizontal, Features: insulated and cladded, outlet DN65, manhole, 2 spray heads
This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: puffer tank, Capacity: 17800 l, Working pressure: 4 bar, Length: 4,8 m, Width: 2,4 m, Height: 3 m, Weight: 2000 kg, Material: stainless steel, Position: horizontal, Features: DN80 , Periphery: After consultation, we can equ ...
Horizontal stainless steel pressure tank with a heating coil and various fittings., Additional title: horizontal pressure tank, Capacity: 15000 l, Operating pressure: 4 atm, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal, Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve
Press brake manufactured in 2018. This GASPARINI 4000×185 features a pressing force of 1850 kN and a bending length of 4100 mm. It includes a CNC backgauge with multiple axes and a G-REFLEX frame deflection compensation system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI 4000×185 machine we have for sale. Contact us for further details.
Laminating press manufactured in 2001. This WEMHÖNER KT-F-1E features a pressing area of 5,750 mm x 2,200 mm, with pressing plates measuring 2,600 mm and 2,620 mm in length. The machine accommodates thicknesses from 6 mm to 40 mm and operates at a pressure of approximately 40 kg/cm². If you are looking to get high-quality laminating capabilities, consider the WEMHÖNER KT-F-1E machine we have for sale. Contact us for further details.
Overview This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...
used vacuum press with 3 paternoster magazines Brand: Wemhöner Type: Variopress - Basic Year of construction: 2018 Technical data Heating plate format (mm) 2850 x 1550 Electric heating plate design Aluminum heating plate top Total pressing force (kN) 2400 Chamber pressure max. (bar) 6 Operating temperature max. 180 degrees Celsius Batch or workpiece size max. (mm) approx. 2460 x 1180 Thermoplastic film in rolls Width of the film: approx. 1430 mm Thickness of the film (mm) approx. 0.25 - 1 Pressure chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls
Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Pressure blower: Radial fan pressure blower -Type: Ø 420 mm -Motor: EMK 2.2 kW / 2915 rpm -Volume flow rate: m³/min -Inlet connection: Ø 150 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 420 x 40 mm -Dimensions: 650/560/H760 mm -Weight: 103 kg
Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, Radial fan pressure blower from friction disc friction washing system WTG75-15-500 -Type: Ø 600 mm -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm -Dimensions: 1000/800/H1100 mm -Weight: 343 kg
PRESS FORCES total force (nominal): 1000 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1300 mm SLIDE stroke: 500 mm
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 46131
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 32510
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to SLIDE EJECTOR / CUSHION stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg El. cabinet (Ritta) Machine hours: 47037
Fully automatic baler Manufacturer: PAAL Type KONTI 325 D Operating hours: approx. 22,300 h Year of Make: 1999 Technical manufacturer data: Press force: 94 t at 300 bar Specific pressing pressure: 10.3 kg/cm² Drive power: 2 x 55 kW Total connected load: 150 kW / 280 A Oil tank capacity: approx. 3,100 litres Throughput under operating conditions: approx. 430 m³/h Performance at: 35 kg/m³ bulk density: approx. 14.5 t/h 60 kg/m³ bulk density: approx. 25.0 t/h 100 kg/m³ bulk density: approx. 39.5 t/h Filling opening: 1,020 x 2,000 mm Bale size: 750 x 1,100 mm Binding: 4-fold vertical Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Whirlpool can be inserted from the rear
CONTROLS PLC SIEMENS SIMATIC PANEL PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 400 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1300 mm SLIDE stroke: 700 mm DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1100 mm Machine hours: 14060
Here I offer a proof press from Max Simmel, model Berlin format 50 x 70 cm. The device is cleaned and tested. The machine is without inking unit, the paint is applied by hand.
Key data: 315 t, 310 mm, 250 mm
Condition used Press capacity 315 t Stroke 250 mm Daylight 310 mm Table size (left to right) 320 mm Table size (front to back) 385 mm Table height 1250 mm Speed at max. press force 7.5 mm/sec Pressure speed at f max. 0.3 mm/sec Return speed 24 mm/sec Oil quantity 390 l Driving power 380 V/ 50 Hz/ 2.2 kW Dimensions 1950 x 800 x 2000 mm Height of machine above floor 2000 mm Total weight 2.4 t Mode of operation oil hydraulic Calibrating presses Description Contact the seller for more information Interested in this machine?
Stage Press / Eccentric Press Erfurt Pressen Erfurt 3, Maintenance No. 156, press force 320 t, year of construction approx. 1980, with 15 press punches, electronic transfer line, conversion by PBK, system consisting of double unwinding reel PBK, straightener PBK, feed, blank cut (Machine is partially dismantled after defect, without tools)
Offset Pressure Press . Format 44 x 62 cm - Gas device is cleaned and tested
1 Piece Used Automatic Baler Manufacturer: PRESONA Type: LP 80 VH1 Year of Make: 1993 Technical data: Press force: 78 t Specific pressing force: 9.5 kg/cm² Drive power: 1 x 55 kW Throughput capacity: approx. 400 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 450-600 kg Binding: 5-fold vertical Oil tank: approx. 1,000 litres capacity, standing separately next to the machine Machine weight: approx. 22 t
1 Piece Used Automatic Baler Manufacturer: PRESONA Type: LP 80 CH2 Year of Make: 1993 Technical data: Press force: 78 t Specific pressing force: 9.5 kg/cm² Drive power: 2 x 45 kW Throughput capacity: approx. 560 m³/h Filling opening: 1,650 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 450-600 kg Binding: 5-fold vertical Oil tank: approx. 2,000 litres capacity, standing separately next to the machine Machine weight: approx. 30 t
1 Piece Used Automatic Baler Manufacturer: SACRIA Type: SAPHIR 340 AT Year of Make: 2001 Technical data: Press force: 40 t Specific pressing force: 5.10 kg/cm² Drive power: 15 kW Throughput capacity: approx. 90 m³/h Filling opening: 1,250 x 1,100 mm Channel format: 900 x 800 mm (H x W) Bale weights: up to approx. 300-350 kg Binding: 4-fold vertical Oil tank: approx. 400 litres capacity Machine weight: up to approx. 6.5 t
Manufacturer: DURMA Model: HESSE AD-R 30175 Year of manufacture: 2013 Type of machine: Edge bending machine / bending machine (press brake) Bending length: 3000 mm maximum Pressing force: 175 tons Control system: CNC control with graphic display, 4-axis controlled Connectivity: Network connection Bending capacity: Full bending width can be maximized at 8mm Table feature: Automatically controlled table pre-stressing Find more here - .ucymachines/ Contact us at - sales@ucymachines
Block size press Müro 4x5000/A3 WT; cleaned and tested; 2x dryer; insertion width 525mm; Insertion height 525mm. Padding press Müro 4x5000/A3 WT; cleaned and checked; two heaters; working width 525mm; working hight 525mm.
Used Italpresse UT/6 hot press for finishing with the application of veneers of chipboard, plywood panels. MDF, solid or plastic laminates, whether or not for aluminium and other metals The press plates are solid perforated steel plates Table top size: mm. 3000 x 1300 Maximum opening mm. 400 Diathermic oil heating of the hobs with electric boyler complete with circulation pump Boyler da 27 kw - 380 V Selector switch for use 50% of the boyler power - 13.5 KW in the first position or 27 KW in the second position - Pressing time setting with automatic opening Max pressure 300 bar Exclusion of 2 side cylinders from the control panel Protection Mylar on the tops Machine dimensions: mm. 3700 x 1700 x H. 2100 Weight kg. 6600 Machine according to CE regulations
Key data: 80 t, 2600 mm
Inv. Num. : 9319 Type: CNC HAP 2680 Producer: Ermak Created: 2006 Parameters: Control system: CYBELEC Compressive force: 80 t Maximum bending length: 2600 mm Machine height: 2750 mm Machine length: 3750 mm Machine width: 1950 mm Machine weight: 6000 kg
Manufacturer: Strautmann Model: BP900 Type of Machine: PET press Year of Manufacture: 2008 CONDITION - Operating hours: 922 - Condition: Excellent condition MAIN COMPONENTS - Includes conveyor system Find more here - .ucymachines/ Contact us at - sales@ucymachines
Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible.
A hydraulic two-column press brake Atlantik is available. Press force: 135t, bending length: 3000mm, throat depth: 250mm, ram stroke: 120mm, overrun time: 84ms, safety distance: 134mm, machine dimensions X/Y/Z: approx. 3500mm/1700mm/2300mm, weight: approx. 6800kg. An on-site inspection is possible.
Features: Overall height 1411 mm Diameter 700 mm Weight 80 kg Description Operating pressure: +2.0 bar Pillow Plate/ Interior Permissible. Operating pressure: +3.0 bar/ +2.0 bar Test pressure: +5.1 bar/ +3.4 bar Permissible. Operating vacuum: -0.15 bar/ -0.15 bar Permissible Operating Temp: +80/-10°C/ +130/-10°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Topsoil: - Stable stacking crown - Manhole cover round 400 mm with 2 x handle - Weld-on nozzle DN 50 (blind cap DN 50 for an extra charge) - 1 x pressure relief valve - 1 x CO2 aeration valve - 6 x star head screws Cylinder Bottom: - With cooling jacket - Connections for cooling jacket on the back and side inlet and Outlet - With tasting tap DN 25 (on extra charge) -with dip shaft sleeve with tempe ...
Key data: 5 t, 350 mm, 310 mm
Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!
Briquetting machine PRODECO E 60 Super Vertical Briquette diameter 60 mm Max. briquette length 60 mm Motor power 5.5 kW Capacity 10/60 Kg/h Pressing force 900 kg/cm² Container dimensions 1600 x 1600 mm Supply Voltage 400V Dimensions 215x180x150cmH Weight 870 kg Year of manufacture 2019
maximum number of results exceeded
please refine your search
