chamfer used for sale

diameter: -- mm workpiece length: -- mm work piece width: 0 - 3 mm speeds: 3600 U/min range of angles: 30 - 60 (stufenlos) ° weight of the machine ca.: 31 kg dimensions of the machine ca.: 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit  ...

diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...

Saw blade grinding machine Schmidt Tempo ECE 45 - 4 Technically obsolete in 2023 CBN deep section with A-Pos and automatic chamfering Prepared for the use of grinding oil, so that a much longer service life of all aggregates is guaranteed in contrast to working with emulsion. The automatic measurement of the tooth position for regrinding and chamfering is carried out via the AUTO POS system. A short video of a calibration process can be viewed under the link. Car. Fire extinguishing system Kraft und Bauer For regrinding and production of circular saw blades with angle and arch tooth according to tooth shape A, AW, B, BW, and C according to DIN 1840 for circular saw blades from 20 mm Ø to 550 mm Ø. Cycle and grinding time display automatic central lubrication Control cabinet cooling Centering holder with centering bolt 16 mm Ø Tension nut with mec ...

6-axis circular saw blade grinding machine with loading robot Schmidt Tempo Freestyle -inclusive. automatic fire extinguishing system Kraft & Bauer The machine is suitable for regrinding and re-gearing of all tooth shapes, cutting and angles with automatic threading, as well as for automatic chamfering in the deep grinding process using CBN or diamond grinding wheels. The machine is technically overhauled in our company and is prepared for the use of grinding oil, so that a much longer service life of all units is guaranteed in contrast to working with emulsion. All mechanical components such as linear guides, ball screw, grinding spindle. Bearings, etc., as well as wear parts are replaced. Saw blade diameter 20 - 550 mm Saw blade thickness 6 mm Working speed 3 - 75 strokes/min. Number of Teeth 999 Max. Saw blade stack height 180 mm

diameter: -- mm workpiece length: -- mm work piece width: 15 mm range of angles: 15-50 ° plate thickness: 6-40 mm total power requirement: 1,5 kW Feed speed: 3,5 m/min. dimensions: 530 x 395 x 860 mm weight of the machine ca.: 94 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from a ...

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Tenon mills in perfection A video of the running machine can be sent on request. Program 1: Set-up operation Program 2: Manual milling Program 3: Straight or oblique pins up to 60 degrees with chamfering and starvation Program 4: Flattening, e.g. for corner and ridge blades Precise adjustment options and precise positioning by laser Special milling head with milling ring for plating, chamfering and tenon milling High-torque 6kW motor with automatic motor brake Feed control for hardwood use 3m stop profile with scale Tenon milling at right angles up to approx. 500 x 250mm Ideal machine for carpentry, timber construction, half-timbered houses, carports and pergolas Suction connection 2 x 100mm Protective curtain automatically opening and closing Hood lock Kill switch CE mark Includes instruction manual and comprehensive on-board tools Original paint, only dabbed  ...

OMCA 900 Mitre Saw Sheet metal chamfering machine OMCA 900 Manufacturer: OMCA Type: 900 Year of construction: 2012 Technical Specifications Motor power: three-phase 230/400 volts, 4 kW, 50/60 Hz, 4 poles Tilt adjustment: 5 mm - 33 mm (50 mm diagonally) Bevel angle: 15° - 60° Sheet thickness: 8 mm - 50 mm Milling cutter Ø 63 mm Z 5 Cutting speed: 0 - 750 rpm Feed speed: 0 - 1 m/min Working height: 800 mm ÷ 980 mm Dimensions: 600 x 650 x H 1600 mm Weight: 175 kg Machine in excellent condition.

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

Chamfering and deburring machine for gears, type: zea-4, manufactured by gleason hurth, germany, 2009. Siemens cnc control. Technical condition - like new! The Gleason-Hurth ZEA-4 rotary deburring machine is designed for dry deburring of disc details up to 280mm in diameter and shafts up to 400mm in length, max. module 5. There is a set for the deburring machine. DTR.

Offer via gebr. overhauled - pipe cutting and chamfering machine Fabr. Orbitalum GF Type GF4 Saw has been completely overhauled and tested. - Engine remounted and new gasket. - Gearbox remounted and new seals Specifications: Tube outer diameter 15-120mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Electronic speed levels 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

On offer is a used rumble system with sorting and translator for chamfering concrete and natural stones The plant is fully functional and can still be visited during operation.

CNC Gantry Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5600 Year of construction: 2009 CNC Control: Global Control Plus Track width: 5,600 mm Raceway length: 21 m on HEB beams Equipment: 1 x Skew Rotator Delta with plasma torch Power source Kjellberg HiFocus 360i Skew Rotator DELTA - is based on one of the most successful Plasma chamfering units worldwide - Compact design for maximum Effective working width - C-axis rotation +/- 450° - Bevel cuts from -45° to +45° 4 oxy-fuel burner trolleys 3 equipped with ALFA burners Extraction table Beuting Dimensions: 4,200 x 18,200 mm Donaldson Torit filtration system

Wood Her UNO 1304 FÜ + PU Edge thickness 0.4 - 6 mm Control panel with selector switches for adjusting the units Pre-milling unit for attachment in front of the gluing part Fully automatic edge magazine for rolls and strips Glue Application Station: Cartridges + PU Gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit 1918 for rolls and strips up to 8 mm edge thickness with pneumatic changeover of 0-10° incline of the cross-cut saws Milling unit flush milling 6 mm, radius milling - bevel milling - 15° Scraper unit for chamfers and radii with 2 scraper blade carriers pneumatic indentation and disengagement Surface Scraper Unit - Finish Machine is WORKSHOP OVERHAULED in TOP CONDITION from a craftsman's workshop

Edge banding Holz-Her Type: 1417 Sprint Year of construction: 1999 Banding thickness max. 8 mm Workpiece thickness = banding height 6 – 45 mm Workpiece width min. 60 mm Workpiece length min. 180 mm Workpiece protrusion via the transport chain on the assembly side 30 mm Feed speed 11 m/min. Feed motor 1.5 kW Swivel control panel Machinery: Pre-milling unit 1961 Edge feeding 1901 - fully automatic edge feeding of roll goods and stiff goods Glue application station 1906 or 1910 cartridge system Printed in 1913 Cross-cut unit 1918 – 2 cross-cut saw motors guided diagonally on round bars Milling unit 1942 – flush/radius/chamfering station Milling unit 1942 M – flush/radius/chamfering station Scraper unit 1929 - for radii up to 3 mm Form milling unit 1983 – 1 motor 0.6 kW 18000 rpm, copy corners up to 3 mm edge thickness Surface scraper unit 1964 – for  ...

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks, each with a stack height of 250 mm,, Device for automatic chamfering (smallest sawblade diameter: 100 mm),, Automatic threading of the grinding wheel,, Automatic central lubrication,, Coolant system 400 L with coolant tank,, Integrated machine light,, 1 mist extractor,, 1 set of operator tools,, 3 sawbalde pins for loader., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x 2015 mm, colour: blue/grey RAL 7047 / blue RAL 250-50-20 ...

Suitable for end machining of blanks as well as for peeling grinding of steps, for producing tips, chamfers, radii and their combination at the ends of cylindrical tools made of solid carbide, HSS and ceramic. Up to four different grinding wheels in one clamping. Accessories: NUMROTOplus single-user system software, Software NUMROTOplus touch cycles workpiece (RS/SF), Software NUMROTOplus SF cycles, Software NUMROTOplus cylindrical grinding SF 40 incl. software & hardware (hollow shaft motor), Chuck clamping cylinder pneumatic, Balancing system SA (semi-automatic) EB 500, Pneumatic workpiece clamping, Oil collecting pan, Electrostatic mist extractor., Traverse X-axis: 450 mm, X axis travel: 450 mm, Z-axis travel: 250 mm, X-axis resolution: 0.001 mm, X axis resolution: 0.001 mm, Z-axis resolution: 0.001 mm, Resolution Z axis: 0.001 mm, Resolution C-Ache: 0.001°, X-axis rapid traverse: 15 ...

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

•Compact design - edge thickness 0.4 - 6 mm •Control panel with selector switch for adjusting the units •Pre-milling unit for attachment in front of the gluing part •Fully automatic edge magazine for rolls and strips •Adhesive application station cartridges + PU gluing •Workpiece height 6-60 mm •Printing unit pneumatic •Cross-cut unit 1918 pneumatically for rolls and strips up to max. 6 mm edge thickness •with pneumatic changeover from 0-10° inclined of the cross-cut saws • Milling unit flush milling 6 mm, radius milling 3 mm, bevel milling - 15° •Scraper unit for chamfers and radii with 2 scraper blade carriers •pneumatic engagement and disengagement •Surface Scraper Unit - Finish •Machine WORKSHOP overhauled in TOP CONDITION from stock Lieboch

Description: Automatic cut-off machine for perpendicular cutting and high-low chamfering on grooved and flat wooden bars for the production of dowels of length 30 - 80 mm and for diameters from 6 to 12 mm. This machine allows an average productivity of 30 - 35 cuts per minute Approx. Onsite Dimension. (l x w x h): 380 x 440 x 900 mm, weight approx.: 800 kg

Description: Additional information: Drill rails: - BPS 200 (Ø 200 - 300) = 1 piece, - BPS 300 (Ø 300 - 400) = 1 piece, - BPS 400 (Ø 400 - 500) = 1 piece, The BPS drill rails cover a working range from Ø 200 to Ø 1200 mm for both roughing and fine machining. The extensive range of accessories includes both insert holders for rough machining and micrometric fine machining heads, which are used for Boring, chamfering and reverse machining are suitable. The main body of the BPS drill rail is made of aluminum, on which the steel plate holder plates are attached. weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 400 x 250 x 100 mm

This STEINHAUER eCAB workCenter HS was manufactured in 2006 in Germany. Machining outer parts of control cabinets and mounting plates. It features a spindle motor operating at 18,000 rpm and offers 12 tool positions with SK30 compatibility. It includes special construction for holding chamfered panels with a depth of up to 290mm and a panel length of 2250mm, with a slot width of up to 10mm. Contact us anytime for further information.

Holz Her Sprint 1321 FÜ + PU heavy-duty version - edge thickness 0.4 - 15 mm PLC Screen Control Edgecontrol Motorized, positioning-controlled bridge height adjustment Pre-milling unit for fastening upstream of the gluing station Fully automatic edge magazine for rolls and strips Glue application station cartridges + PU gluing Car. Glue height adjustment / tactile nozzle Printed plant 1913 pneum. Cross-cut unit for rolls and strips 1918 - 15 mm with pneumatic changeover of 0-10° incline of the cross-cut saws Multifunctional milling unit with mot. Adjustment: Flush milling - 15 mm, radii and bevel milling -15° Frommilling unit - corner rounds 1833 Scraper unit for chamfers and radii 1929 pneum. pneumatic indentation and disengagement Surface Scraper Unit - Finish pneum. Buffing unit for replastering and edge polishing with 2 textile discs HIGH-END spraying device Compl ...

Machine for knife sharpening can be used for all kinds of Baader equipment. Designed for resharpening knives and for providing extremely worn blunt knives with exact chamfers again. Circular knives with a diameter of 200 – 400 mm can be sharpened using this tool. An additional tool can also be attached to sharpen knives with a diameter of 120 – 200 mm. Gentle treatment of the material thanks to the lapping method. Sharpened knives are completely free from any burrs. Laid out for a considerably extended size range. Highest efficiency. Power consumption: 0,21 kW. Dimensions: 750 x 450 x 550 mm. Weight (net/gross): 66/105 kg

Article number: 22-99-014 Manufacturer: Beveling machine Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of manufacture: unknown L x W x H: approx. 1500x1000x1000mm Weight: approx. 500kg Max. chamfering diameter: approx. Ø60mm Speed range: approx. 62-210 rpm Accessories  Anfas Tool Other accessories on request Price and other technical data on request

Description: Joiningagreat 2 x 2kW /gluing cartridge system/capping/milling station radius chamfering 0-15°/radius drawing/ separating/ detergent spraying unit copy milling unit/ surface scraper/ fettling station edge thickness max.: approx. 0,4 - 8 mm [mm] workpiece height 6 - 50 [mm] feed speed approx.: 8 [m/min] / elect. connection: 400 V, 3Ph, 50 Hz PRICING IN FUNCTIONALLY TESTED CONDITION - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure / documents and may differ from actual values. ATTENTION: it is expressly pointed out that this lot corresponds only to the scope of the lot description. If there are any objects on the photo that are not explicitly mentioned in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software, operating equipment, etc. (in relation to the photo and lot d ...

Description: • Orbital belt sander • Ideal for sanding chair components with round or oval sections and for chamfering edges of square or rectangular workpieces • Serial number 920170 • 2 feeders (input and output) with 0.26 KW motors each • 2 sanding bands measuring 1220 x 70 mm • Sanding motor power 4 KW • Passage diameter 170 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 850 x 1,400 mm, weight approx.: 300 kg

Edge chamfering machine KF 6000 OPTIEDGE is a powerful portable edge cutter that has proven itself in harsh operating conditions. The device is the optimal choice for chamfering large metal sheets or heavy, bulky workpieces without having to move them. - Length of guide rails 230 mm - Width of the bevel max. 10 mm - Angle adjustment 15 - 45° - Motor power main drive 0.75 kW - Powerful servo motor - Infinitely variable speed If you are interested, we will be happy to send you our complete data sheet.

Description: Serial Number: 86100 Grinding wheel: CBN - diamond 1.3 to 6mm CBN bore: 32mm Operating speed: 60m/s Circular saw blade diameter: 80 - 560mm max. circular saw blade thickness: 6mm Tooth shapes: Curved tooth (B, C according to DIN 1840), pointed tooth / angled tooth (A according to DIN 1840) Connected load: 7.0kW Grinding motor power: 2.2kW Accessories: 3x grinding wheel holder, blade holder F-1004, F-1008, F-1009 Operating instructions, circuit diagram, spare parts list For processing HSS and solid carbide circular saws. These can be resharpened, re-toothed and chamfered. The specified tooth form curve is achieved via two controlled axes. During the grinding process, the CBN grinding wheel traces the complete tooth shape and removes the desired amount of material, while the control system calculates the number of teeth from the diameter and the number of teeth. O ...

Description: 'SINICO' TR90/2-550 TOP 2000 CNC automatic transfer machine, suitable for tube cutting, facing and beveling operations. N° 1491 Specifications: , Machinable diameter: 12 - 90 mm Range of machinable lengths: 50 - 550 mm Cut-off unit power rating: 9kW Log saw unit speed range: 35 -230 rpm Machine equipped with: , Rapid jaw change rotary table Four vise units rotary table No. 2 machining units for facing, chamfering and centring Bar loader with beam magazine Complete with chip conveyor Use and maintenance manual Harmonisation to CE standards Machine components: , Loader: 6000x2300mm - 2500 Kg Electrical cabinet: 800 x 2400 - 900 Kg Cutting unit: 5000 x 1600mm - 6100 Kg weight approx.: 9,500 kg, Approx. Onsite Dimension. (l x w x h): 11,800 x 2,400 x 1,800 mm

Contour edge bander Fabrikat: VITAP Type: BC91 EVO New machine Max. flexibility by means of a smart construction - For gluing chamfers on rectangular or formed workpieces - Tilting table 0°-45° - To glue pieces 10-60 mm thickness - Edge material: PVC, melamine, veneer, plastic, laminate, solid wood - Nr. 2 glue spreading rollers - Cutting guillotine up to 3 mm thickness - Glue pot (kg 3), with electronic adjustable heating system - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece and measuring edge length - Feeding speed adjustable from 7m to 20m per min. Solid Phenolic table - Easy to clean - With no transmission of heat - Plastic cups to raise the piece above the table - 2 kg vitap glue 280.00 for test - CE standards Optional: - Enlarged tape plate 800 mm - Semi-automatic end-c ...

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105.5 mm   length min.: 3000 mm   lenght max.: 12500 mm PRODUCT (PROFILE, TUBE)   length min.: 20 mm   lenght max.: 2000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 100 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internal ID Number: FIX16/Rattunde1 Rattunde ACS 102/2/BM+CFM+SCB+SRT+PI System consist of: + Saw ACS 102+ Chamfering Machine CFM (chamfering on both sides) with automatic adjustment+ Chip Blow-Out (Pneumatic Cleaning)+ Measuring Station+ Step Conveyor Bridge SCB + Stacking robot for automatic workpiece stackingmax. weight of raw material: 230 kg/piecemax. weight of finished part: 25 kg/piece Tools are not included in the scope of delivery.

CONTROLS    SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105.5 mm   wall thickness min.: 0.8 mm   length min.: 3000 mm   lenght max.: 12500 mm PRODUCT (PROFILE, TUBE)   length min.: 7 mm   lenght max.: 2000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 100 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internal ID: Fix 21/Rattunde 5 Rattunde ACS 105/2/BM+CFM+SCB+SRT+CC+Pi + Chamfering Machine CFM (chamfering on both sides) with automatic adjustment max. weight of finished part: 25 kg/piece Tools are not included in the scope of delivery.

CONTROLS    SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 10 mm   external diameter max.: 105 mm   wall thickness min.: 0.8 mm   length min.: 3000 mm   lenght max.: 12500 mm PRODUCT (PROFILE, TUBE)   length min.: 20 mm   lenght max.: 2000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 100 kVA   mains voltage: 400 V   mains frequency: 50 Hz Internal ID: FIX23/Rattunde7 Rattunde ACS 102/2/BM+CFMcurve+SCB+SRT+PI + CFMcurve end machining on both sides with automatic adjustment Performance data (actual production):+ 2500 pcs/h (sawing only)+ 1800 pcs/h (with chamfering CFM) Exclusions from supply (even when visible on photos):- the equipment is sold without crate roller table Tools are not included in the scope of delivery.

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 450 mm   sheet width min.: 90 mm   sheet thickness max.: 13 mm   sheet thickness min.: 2 mm   exterior coil diameter max.: 1900 mm   exterior coil diameter min.: 1100 mm   internal coil diameter max.: 760 mm   internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 30 mm   external diameter max.: 140 mm   wall thickness min.: 2 mm   wall thickness max.: 12 mm   length min.: 4000 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min   feedstock transport direction: left to right Line consis ...