chamber used for sale

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 20-1/1 Electric model with 20 shelves GN 1/1 New is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The super-fast intermediate and self-cleaning keep your device squeaky clean. It is a young used combi steamer from 01/2023. The RRP is € 25,520 net Availability: available directly from stock in week 09/2024 The indicated price is gross incl. 19% VAT. Service: We would be happy to provide you with a certified Rational customer service from master craftsmen, within a radius of approx. 100 kilometres from our location (postal code: 35418) Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether S ...

machine measurements: 2.430 x 1.110 x 2.360 mm machine weight: -- kg power capacity: 2,2 kW Condition: used Specification: 3-chamber baler, type: 8020 E.F.G. The baler is suitable for simultaneous pressing of paper, cardboard, foils & cans at the same time. The machine works automatically after starting. The plunger is moved manually over the chambers. The third chamber is currently in storage, but can be added without be added without any effort. - Press force: 20 t - Cycle time: 25 - 30 sec - Engine power: 2.2 kW - Total length with 2 chambers: 2,430 mm - Total length with 3 chambers: 3,650 mm - Total width: 1,110 mm - Total height: 2,360 mm - Voltage: 400 V, 50 Hz Bale dimensions L/W/H approx.: 1,100 x 800 x 800 mm Bale weight approx.: 200 - 220 kg The bales are tied with tied with 4 straps. Documentation in German, consisting of: - de ...

Stock# U2428-3 Used horizontal cooker by Berief Gmbh & Co. KG. with total volume 800 l. Cooking chamber has internal dimensions: diameter 1000 mm x lenght 1000 mm. Machine is rated for work on temperature up to 100 C inside the chamber. Heating channels have volume 55 l and are designed for work on pressure up to 10 bar and temperature up to 184 C. Tank is insulated and layered with stainless steel. Machine has mixing shaft with bolted 6 paddles, each one equipped with wall scrapper, and two side wall scrappers. Shaft is chain driven by el. motor 3 kW and gearbox. Discharge of tank by tilt, operated by el motor 0.55 kW. Top inlet has dimensions 100 cm x 54 cm, and is equipped with safety stainless steel bars and stainless steel cover. Machine is mounted on two supports integrated with drive and controls, however controls need rebuilding. Machine last time used in food industry.

Kronborg KM Mark 5 Fish gutting machine Condition: Overhauled in 2021 The Jutland Kronborg Fish Gutting Machine is designed for gutting fish such as cod, saithe, haddock, whiting and hake on board trawlers as well as in land-based factories. It is also suitable for river types of fish like a carp. The fish is placed continuously in the feeding chamber, there a conveyor belt with catches transports the fish through a positional system of guiding plates to the gutting chamber. The rotating knife cuts the fish as required. After having been cut, the fish passes a rotating nylon brush and water sprays which remove the last entrails. The gutted fish is led to the outlet end for further transportation. Due to the small size and weight, this machine can be used on vessels of the coastal fleet and shore plants. Capacity: 40 fish per minute Size range: 30-75 cm Power consumptio ...

Key data: 260 mm, 1250 , 1250

We constantly have new and used convection chamber furnaces on offer. Give us a call! Convection chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and drive-in channels and exhaust fan Demo unit, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs each 20 segments freely programmable -NtLog for controller recording the data via USB stick -Temp. uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air flow rate 125m³/h -Auxiliary: Controlled cooling (exhaust fan) Entry rails Bushing 40 mm -Connected load 27 KW -Weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We ar ...

Glasbeek Finish Gas Poederwand Chamber Oven 250°C Glasbeek Finish Gas Poederwand Chamber Furnace Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V YOC 2003 Approximate internal dimensions (W1200mm x D3100mm x H1400mm) with loading trolley L2800 x W1020mm Approximate external dimensions LxWxH approx. 320x240x250 cm

Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)

Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW

Key data: 850 mm

We always have convection chamber furnaces on offer. Give us a call! it 12 months warranty, from 2023, original packaging, in stock -500 liters -Max temperature: 850°C -with controller P570 ( 50 programs with 40 segments each ) - Process documentation on the customer's USB stick -Furnace chamber: W x D x H 750 x 1000 x 750 mm -Temp. uniformity +/- 5 °C according to DIN 17052-1 in the empty furnace room -Max 125 kg charging weight opt. Tray (not included) -Connected load approx. 28 KW -not suitable for solvent-based substances - Documentation, CE declaration Auxiliary: Controlled cooling (exhaust fan) Viewing in our warehouse by appointment. We stock new and used industrial furnaces. Get in touch with us!

1 piece of used and insulated double chamber silo e.g. for storing cement, microsilica or Stabilmac Capacity 60 to (50m3) double-chamber version, with double partition/insulated! Outlet flange height to lower edge of rotary flap closure 1675 mm Silo diameter 2900 mm Cone inclination, pipe-shaped 60°, (no cone plate) filling pipe diameter 100 mm including - 2 injection pipes up to 1300 mm above the road with B fixed couplings - 2 control openings - Connection flanges for silo fill indicators, exhaust air filters and cement loosening - 2 silo baromats (over- and under-pressure protection) - railing (galvanized) - 2 rotary flap closures on the outlet cone (DN 250) - 2 note boxes. INSULATION of the 60 t silo (roof, cylinder and cone) consisting of: Mineral wool, 80 m and with cover plate For an additional charge: 2 pieces of suitable screw conveyors Location: S ...

2-doors steam sterilizer for the sterilisation of solid, porous and liquid goods. Chamber size approx. 960 x 1030 x 1100 mm (depth). Chamber volume: 1250 liter. PLC SIEMENS, type S7-300 (MP 377), electric steam generator (type ELD-H905).

Vacuum Packers Dillmann Machine Systems DMV 400 DMS Specifications: 230 Volt / 50 Hz / 4 A Year of construction 2008 Weight: 40 kg Chamber size: D420 x W455 x H110 mm Welding bar length: 430 mm max. bag size: 390 x 450 mm Machine design Completely stainless steel Compact, solid design Surface sanded domed acrylic glass lid 2 inserts for different height levels in the chamber High-performance pump with 16 m³ capacity Ease of use Vacuum-adjustable Welding time adjustable Stock machine, immediately available! Function checked condition see original pictures. 03423-706493

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 10-1/1 Electric model with 10 shelves GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The device has been tested in our in-house specialist workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The RRP. amounts to 15.090 € net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional and competent advice - before and after the purchase •Free shipping within Germany (excl. islands/mountain stations) • Pr ...

This is a CM (P) 61 combi steamer from the premium manufacturer Rational, in electric version, built in 2019. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6-month warranty on electrica ...

max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

max. tool diameter: 400 mm : 310 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

Type: 300 liter Machine include intermediate stainless steel thermal oil chamber, internal expansion chamber, high-performance thermal fluid, and internal drainage tap Cover: Insulated, with springs and hinges of stainless steel, opening 90° Two internal safety thermostats Capacity: 300 liter Machine dimensions in cm: Length: 100 Width: 94 Height: 122 Electric power: 18kW Delivery time: 15 working days after advanced payment

Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.

Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included

Glasbeek Finish Gas Chamber Oven G.11.01 200°C 54kW Glasbeek Finish Gas chamber furnace Maximum temperature 200°C Electrical connection 4 kW 54 KW 3x380V Approximate internal dimensions (W1900mm x D3000mm x H1880mm)

Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)

Chamber furnace Manufacturer: Nabertherm Model: N161 Year of construction: 2000 temperature 1200 C kW: 30 A: 43.4 Hz: 50 V: 400 N: 3 Combustion chamber dimensions: approx. 54 x 40 x 85 cm Overall size oven: approx. 120 x 170 x 200 cm Weight approx. 950 kg verm. 6,955 operating hours Control: Controller C 40 An instruction manual is available for the control

Used double chamber vacuum packaging machine Multivac AG800 has two chambers which ensure greater efficiency and is used in every industry where vacuum packaging of products is required. The machine is equipped with a high-performance Busch vacuum pump with a capacity of 100m3 / h and four sealing bars with a length of 650mm. The internal dimensions of the packing chamber are: 650 mm x 800 mm x 220 mm high. Busch vacuum pump: 100m3. Final pressure: 0.5 mbar Vacuum system: according to the sensor External dimensions of the machine: 1560 mm x 1100 mm x 1150 mm. Dimensions of sealing bar: 650 mm x 4. Weight: 275 kg.

Stock # U2397-4 Used stainless steel micro cutter/emulsifier by Haarslev A/S (DK) model HF 175. Machine is designed for emulsifing a product, paste type. Can run on meat, chicken, pork etc. Output depends on product and can reach 3-4 tons per hour. Feeding inlet into milling chamber has diameter 105 mm. Machine has stainless steel shaft driven directly by el motor 55 kW, 2950 rpm, 380 V, 50 hz. On the shaft there are mounted two sets of six blade knives and screens. First screen has diameter of holes 1.2 mm. Second screen has holes with diameter 0.8 mm. Knives and screens are designed in non-corrosive steel. Body of milling chamber designed in stainless steel. Discharge via outlet with diameter 65 mm. Machine has local control panel and is mounted on four legs. Includes technical documentation. Last time used in food industry.

Heat exchanger, shell and tube heat exchanger FUNKE Safety heat exchanger for system separation type SWF 301-6-B13-4 Series No. 659839 Drawing No. 748 924 0850 Year of construction 2011 Operating pressure max. Shell chamber 16 bar Pipe space 10 bar Safety room 16 bar Volume jacket chamber = 1.2 liters Pipe space = 0.7 liters Safety room = 0.3 liters Temperature max. 100C jacket pipe 80 mm- leakage indicator via ALCO pressure switch- 2 pieces pipe fittings on the jacket pipe M30 x 2mm thread for 22 mm pipe- outer diameter (hydraulic oil)- 2 pieces pipe fittings on the lid 3/4 (cooling water) Dimension L x W x H: 580 x 220 x 130 mm Net weight: 16 kg good condition; used

Winkler quail Aeromat proofing chamber proofing cabinet -Proofing chamber from Winkler Wachtel without proofing room air conditioner -with 2 doors -for 4 wagons or 2 pulling carriages à 2m

used confectionery oven Friedrich E4 8/6 GS C, in baker's condition, good condition, 4 levels, for trays 80 x 60 cm, with cooking chamber and steam condenser, with computer control, power of the baking chambers 13.2 kW in total, power of the control 1 kW, power of the cooking chamber 2 kW

DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...

Automatic packing machine for filling and packing tea into double chamber tea bags. Including Volume dosing unit and tag system. Tag system: stapled (label-thread and thread-bag). Forming the double chamber bag by cold sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 130 cycles per minute | dosing volume: max. 10 cm? (adjustable) | hopper capacity: 13 dm? | accuracy: ?5% | tea bag dimensions LxW: 40x60 / 45x60 mm | roll width tea bag material: 94 / 103 mm | suitable tea bag material: 12.5g/m?, cold-sealable | label (LxW): 28x32 mm | thread length: 148 mm (?5 mm) | material diameter staples: 0.5 mm | power supply: 220/380V | power consumption: 10kW | compressed air required: 0.6 MPa | compressed air consumption: 300l/min | machine dimensions LxWxH: 3500x1500x2400 mm | weight: 4250kg.

Vertical packaging machine specially designed for the cosmetics industry for the production of round bags and for 4-side sealed double chamber bags. The completely round side sealed bags are produced at 2 pieces per cycle. When changing the bag type, time is needed for changeover, which requires technical experience. A dosing pump for creams, fluids, etc., is included and is selected on the basis of customized product requirements, which results in the respective specifications. PLC LCD touch display from Siemens, automatic program-Set-Up, mark sensor, stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: customized | film roll width: max. 320mm | suitable for composite and single-layer aluminium, PE, BOPP and PP films, paper | max. speed of the machine in neutral: 40 cycles/minute (corresponds to 80 round bags or 40 double chamber ba ...

Other Info: 1 Hardened Steel Nozzle High temperature hardened steel nozzle enables advanced material usage and quality results. Advanced auto leveling and calibration insures high precision accurate parts. Heated Chamber Ensure Excellent Print Quality The heated chamber keeps the printing temperature constant for excellent performance on complex geometries. High Performance Dual Extrusion The high performance dual extruder allows for use of advanced materials like PETG, ABS, PLA, Tough PLA and of course water-soluble support material. Double Capacity Supports Large-area Continuous Printing without Interruption Two 3kg rolls capacity extends ease of use and change over intervals. Y tube connector can replenish the filament immediately if ran out of the filament from one side.   Fused Filament Fabrication (FFF) It is a 3D printing process that uses a continuous filament ...

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.

chamber volume: - liter useable volume: 1,6 liter friction: - motor drive power: 22 kW Condition: used - overhauled Specification: Laboratory internal mixer - second-hand - chamber volume: approx. 1.6 l - closing system: front door with pneumatic piston - plunger: pneumatic - rotor geometry: tangential type - Oil-free self-lubricating sealing rings - New rotary union for water cooling - New main gearbox - New AC motor: 22 kW - Control cabinet: NEW - Control panel with OP 7: NEW - Wiring: NEW - New frequency converter for variable speed - Paintwork: according to customer specifications - With safety devices according to current standard - overhauled, with warranty 12 months, with CE-marking, Operating and maintenance instructions in English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand new 3D printer Sinterit Lisa Pro for sale (used once). Specification: - built-in nitrogen chamber - Nitrogen consumption: 0.48 m³/h - Heating system with max. chamber temperature: 200°C, laser: IR Laser Diode 5 (W), Installation space in mm (x/y/z): 150x200x260mm, Accuracy (typical): 0,05mm, Weight in kg: 89, Dimensions in mm (w x h x d): 680x510x900mm

Very little used Stratasys F370 for sale. Last maintenance in 07/2021, operating hours: approx. 120h, network connection: LAN (Ethernet), W-LAN, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (only 64-bit), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, printing features: Interchangeable Extruder, Heated Build Chamber, Closed Build Chamber, Two Extruders (Model & Support), printing technology: FDM - Fused Deposition Modeling, number of nozzles: 2, nozzle diameter: T14 (0.3556mm), Layer thickness: minimum 0.127mm

TEPARK KPI-115-ST500 sandblasting cabinet manufactured in Poland in 2011 is used for thorough cleaning of small and medium-sized workpieces using abrasive materials such as electrocorundum or steel shot. The cabin sandblasting machine’s structure is made entirely of welded sheet metal to ensure high durability and tightness. Inside the machine is a fully lit working chamber with a 150 kg rotary table. The total weight of the sandblast machine is 280 kg. Technical data of the TEPARK KPI-115-ST500 sandblasting machine - maximum workpiece weight: 150 kg - work chamber size (L x W x H): 1150 x 900 x 800 mm - rotary table - injector gun - chip extractor: DEDRA DED7724 - workspace illumination - pressure: 10 bar - power supply: 230 V; 50 Hz - weight of machine KPI 115 ST500: 280 kg

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

Multi-purpose measuring device, presetting and testing device VWF 220 x 35 shaft diameter: Ø 35 mm Maximum diameter measuring chamber: Ø 220 mm measuring chamber width: 180 mm dial gauge holder: Ø 8 mm in wooden box used, tested ! Dimension: 380 x 280 x 310 mm Dimension (wooden box): 380 x 340 x 240 mm

KIMLA POWERCUT LF 1530 4 kW fiber laser for tubes and sheet metal was built in 2021. The reliable machine, built on a rigid monolithic body, uses advanced fibre technology to cut workpieces with a maximum weight of 900 kg. The 4 kW high-quality fibre optic beam fed directly to the cutting head expands the machining possibilities and guarantees the user very smooth and even edges. The high-quality steel work table with precise mechanical locking stiffens the pallet during cutting, ensuring that the workpiece remains stationary and secure while cutting in the X, Y and Z axes. In order to ensure that the cutting process is uninterrupted, the KIMLA laser cutting machine is also equipped with an automatic pallet changing system which allows workpieces to be loaded and unloaded at the same time, without interrupting the production process. The POWERCUT LF 1530 fibre laser cutting machine ...

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Stock# UG6368 Used stainless steel z-blade mixer by Apinox (IT) type S800/CW. Total volume of mixing chamber 780 l. Mixer is driven by el motor 45 kW, 1475 rpm, 400 V, 50 hz. Mixing chamber is equipped with heating-cooling jacket. Machine dimensions: L 350 cm x W 160 cm x H 250 cm x weight 7 tons.

Technical specifications:, Dimensions of the filling box: Width: 1,400 mm, Height: 1,120 mm, Length: 2,450 mm, Dimensions of the press chamber: Width: 1,400 mm, Height: 1,120 mm, Length: 2,750mm, Package cross section: 300 x 300 mm, Drive power: 2 x 90 kW, Working pressure: 290 bar, Max. operating pressure: 300 bar, Year of construction: 1986, Weight: approx. 50 t., Fill box dimensions: Width 1,400mm, height: 1.120 mm, Bale chamber dimensions: Width 1,400mm, length: 2.750 mm, package cross section: 300 x 300 mm, drive power: 2 x 90kW, work pressure: 290 bars, Construction year: 1986, mass: about 50 t.

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Viessmann cooling/freezing chamber External dimensions: 3600 x 2400 x 2160 mm Internal dimensions: 3400 x 2200 x 1960 mm Plate thickness: 10 mm Stainless steel floor Cooling/freezing unit in set Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included

vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Infinitely adjustable cutting thickness from approx. 0 to 42mm, max. approx. 160 cuts/minute. Push-button operation, voltage 400 V / 3.0 kW, chamber length 200 x 240 x 700 mm, 1 toothed knife ready for use. Infinitely adjustable cutting thickness from approx. 0 to 42 mm, approx. 160 cuts/per minute Push button operation, voltage 400 V / 3.0 kW, chamber length 200 x 230 x 700 mm, 1 toothed knife working condition.

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...