chamber used for sale

We are selling a Stratasys F370 on behalf of a customer. Maintenance contract was active until 04/2023. The machine is in very good working condition and comes with many accessories., Stratasys F370 Accessories:, - 9 Build Trays, - 1 role QSR Support, - 1 roll ABS black, - 8 printheads (2 installed), - 4x lye powder for washing out the support material, - last electrical safety test in 10/2023, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing tech ...

Manufacturer: Fryma Fryma Model: MZM/VK - 25 Year : 1999 Type : Vacuum mixer for pilot production   Filling volume : Total volume: 48 L Useful volume: 7 L - 25 L Jacketed: 4.5 L max   Recommended operating pressure : Vessel chamber : - 1 to 0 bars Jacket: 2.4 bar Operating temperature : Vessel chamber: 80?C Jacket chamber: 140?C   Protection: safety valve Parts in contact with the product: stainless steel 1.4401 / AISI 316 Homogeniser motor power: 5.5 kW   Vacuum pump : Type : Lema 25 Brand : Sihi Vacuum capacity: 16 m3/h Water requirement: 0.26 m3/h   Product pump : Type : SPS 1 N Make : Maso

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

"PAWERT" SPM I-90/200 Manufactoring in 1992, reconditioned in 2016 Mechanical single head crank-type Briquette Press for continuous Heavy Duty operation. - Capacity: 2,650 Lbs/Hr (1,200 kg/Hr) depending on raw material quality. Briquette dimensions: 3-1/2" (90 mm) dia.; 3/4" to 11-3/4" (20 - 300 mm) length. Main drive: 75 HP (55 kW installed). High quality welded steel construction. Belt driven flywheel drive. Pre-Heated oil Chamber. This press has (200) press strokes per minute forcing the material through an extrusion chamber to produce uniform material at a high pressure; significantly reducing the volume from of chips/dust to a densified log. This line also has: fully automatic cutting saw control box. < Conveyor Belt. KALLFASS UNIVERSAL Type "600" Shrink Tunnel for packaging. The PAWERT Press was reconditioned in 2016 This is a complete line. it just needs the ...

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

1 x Francis Shaw model K1 Intermix MK4, Installed new in 1991, fully maintained and checked over by HF in 2005. Net chamber volume: 5.5litres, pneumatic hopper, hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor and controls. Castell Key interlock system Complete and in excellent condition. Chamber and rotors are like new! O/a dimensions: 3m x 1.2m. Can be seen working. All manuals/documentation available.

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

used drainage facility chamber filter press / filter press REWA 500x500 record size: 500 x 500 mms chamber number: 25 pieces cake thickness: 30 mms and used high pressure piston - membrane pump Abel conveyor achievement: 6 m? / h conveyor pressure: 15 cash

Stock # U2333-1 Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped wi ...

Manufacturer: LOGIPACK Type: TF-XM Power: 2 kW Weight: 210 kg Dimensions: 900 x 650 x 1600 mm Power supply: 400 V, 50/60 Hz -Made of stainless steel -Vacuum + possibility of fumigation -Control MC -Single Chamber 2 trays at the same time -Internal dimensions of the Chamber 400 x 290 x 200 mm -Dimensions of the shell 220 x 140 mm -Internal tool dimensions of 215 x 130 mm -Maximum foil width 430 mm -Pump 40 m3/h Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Laser system 50 Watt, FOBA DP50 for marking and engraving Ideal for beginners or as an extension Deflection unit Scanlab, 254 mm Rodenstock lens with MB RAM and 17" monitor arm, Diode pumping chamber only about 2500 hours in use ready for use, built in 2003 Options: - Suction - other lenses - Machine table (various versions) - Double head/beam splitter Laser system completely cleaned and tested 6 months warranty excl. pumping chamber, place of warranty Lüdenscheid VAT will be shown Delivery EXW, collection possible On request also: Commissioning, instruction and training, maintenance concept, sampling of your workpieces

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Nobilta NOB 300. The Nobilta is the New - Generation of Powder Processor designed to perform fast powder mixing of Macro to Micro precision mixing, creating and treating composite materials such as surface-modification and sphericalizing particles in accordance with specific design conditions in one processor. The Nobilta is structured with a horizontally positioned c ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG-R 200 fluidised bed classifier jet mill system. The AFG-R is a special variant of the standard AFG where one nozzle is placed vertically pointing upwards on the bottom of the grinding chamber to elevate all the material in the fluidised bed to the jets meeting point, specially interesting for heavy and difficult to grind materials. This machine is specially  ...

Gas-heated annealing and hardening furnace make SCHNEIDER GmbH Witten type 6 KMachine -No: 31 built in 2002Technical specifications:Chamber size W x D: 1200 x 900 mmin the rear part of the chamber step downwards: depth 500 x height 400 mmOpening W x H: 1200 x 470 mmmax.temperature: 1300 °Connected load: 300 kWHeating medium: natural gasExternal dimensions approx. W x D x H: 2200 x 2600 x 2650 mmWeight: 5850 kgWith- MEILI hand winch for opening the oven door- Attention without switch and control cabinet!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.

Hobart 305 GTP Dry Steam Fast Cooker Gentle, healthy cooking: steaming, steaming or blanching 3 different pressure levels 0 / 0.5 / 1 bar for individual adaptation to the food Extremely short cooking times Individual temperature program as standard: 50° - 99°C Electronically controlled program sequences Compact tabletop unit with built-in steam generator 1 cooking chamber for 3 x 1/1 GN up to max. 65 mm deep or 2 x 1/1 GN up to max. 100 mm depth or 1 x 1/1 GN up to max. 200 mm depth Multi-setting, the connection value can be reduced to 18.2 kW with hot water connection (power then approx. 550 servings/h) Automatic defrosting Water level controller with display Fully electronic control for time input Self-diagnosis with fault display Chamber pressure is displayed digitally Evaporation destruction with built-in wras condensation Automatic boiler emptying with drain pump a ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Slightly used, in like new condition, classifier mill Hosokawa ACM 5 Pharma. This micronizer allows you to obtain a perfectly controlled top cut. It can be used to fine grind different products. The comminution occurs in the lower part of the grinding chamber where the feed particles are crushed. Thanks to the adjustable classifier wheel on the upper part of the grinding chamber, the ...

Stock# U2397-1 Used stainless steel twin shaft paddle mixer by V.V.S. DI VISCONTI SRL (Italy) model I1500SF with total volume of mixing chamber 2500 l. Working volume in range from 1500 l up to 1700 l. Weight of batch up to 1500 kg. Machine has internal dimensions of mixing chamber W 1100 mm x L 2870 mm x D 900 mm. Shafts are driven by el. motor 22 kW, 1470 rpm, 400-600 V, 50 Hz, via reducer and belts. Working rotation of each shaft is 33,5 rpm. Mixer has top open. Discharge through one outlet with dimensions 500 mm x 200 mm, in front wall. Outlet is equipped with pneumatically operated lid layered with teflon. Mixer has stainless steel lifting device for work on rectangular containers with volume 200 l and width 660 mm. Lifting device is operated electrically. Machine has technical documentation. Last time used in food industry.

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 135 E - with interlocking rotor geometry VOLUME OF THE MIXING CHAMBER: 140 ltr. USABLE VOLUME: approx. 100 ltr. BATCH WEIGHT: approx. 120 kg SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and VFC can be offered). ______________________________________________________________________ _____ TECHNICAL DATA HEAVY DUTY INTERNAL MIXER: MODEL: GK 135 E - with intermeshing rotor geometry VOLUME OF MIXING CHAMBER: 140 ltrs. USEFUL VOLUME: approx. 100 ltrs. BATCH WEIGHT: approx. 120 kgs ROTOR SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body and hydraulic hopper. The gearbox  ...

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF THE MIXING CHAMBER: approx. 250 ltr. USABLE VOLUME: approx. 190 ltr. BATCH WEIGHT: approx. 230 kg ROTOR speeds (standard): 0-60 rpm DRIVE POWER: 1500 kW Hydraulic feeding with 2 hydr. Cylinders The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and FU can be offered). ______________________________________________________________________ _____________ TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF MIXING CHAMBER: approx. 250 ltrs. USEFUL VOLUME: approx. 190 ltrs. BATCH WEIGHT: approx. 230 kgs ROTOR SPEEDS (standard): 0-60 rpm DRIVE POWER: 1500 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body  ...

High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).

High temperature kiln with a maximum working temperature of 1.800°C and a descending / pivoting bottom plate. All lateral walls inside the chamber are heated by Kanthal Super heating elements (= MoSi2). Temperature homogeneity is achieved by the use of U-shaped elements that can be taken out downwards. Operating with 3 transformators and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). Kiln is in mint condition (ca. 50 firings only).

Producent: Treif Type: Argon built 2009 FRAME KNIFE D = 32 mm  The cube and strip cutter TWISTER basic is ideal for those who are looking for a profitable solution for perfect cutting quality in the medium performance class. The machine achieves an output of up to 2,000 kg in one hour, even with continuous use. Since the cutting chamber is generously dimensioned with 550 x 120 x 120 mm (L x W x H), a high filling quantity is always ensured. Product temperature in the range from 0 to - 4 C (depending on the product). Specifications:  maximum number of cuts / minute: 300  mechanical capacity: up to 2000 kg / h - with a net (for a 40x40 mm cube)  Length of loading chamber: 550 mm  Load compartment cross-section: 96 x 96 mm  Cutting thickness: 1 - 50 mm  Machine dimensions: (L x W x H) 1740 x 1480 x 1200 mm  manual loading method  Weight: 415 kg  ...

Reference ID PP-30557 Category Flexo Printer Manufacturer Uteco Model Amber 808 Year Built 1998 Color 10 Impression- Working Hours - Speed 300 m/min Size 1600 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description Flexo CI printing machine UTECO Amber 808, 8 colours + 2 stack units, Film width max: 1610 mm, printing width max: 1600 mm, print repeat: 320–850 mm, mechanical speed: 300 m/min, Unwinding and rewinding turret with automatic splice, Reel diameter: 1200 mm, Cores: 70/76/152 mm, Gear pitch: 5 mm, Thermo Oil Drying, 2 web guides, temperature control unit for CI and water cooling unit, 20 chamber doctor blades, 19 ink tanks, 18 ink pumps, approx. 200 printing sleeves (540–690), approx. 23 anilox rollers (60–300 l/cm), 2 video cameras, Sleeves fast change system, 2 stack unit with register control, Slitting ...

Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

for 6 sheets 60x40 cm digital Miwe FP 12 control with fermentation chamber with swath capacitor mobile on steering wheels Built in 2008 Fermentation chamber digital control 16 editions for 60x40 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 85 cm

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

Used quail Piccolo, 5 floors with fermentation chamber. All floors with separate controls. Fermentation cabinet has 4 editions. 5 floors for 60x80 cm sheets all floors with separate controls Stainless steel clad with hood Fermentation chamber 4 editions for 60x80 cm sheets Dimensions: Height: 240 cm Width: 100 cm Depth: 140 cm Technical data: Year. 03/99 400V - 50 Hz AC/3PH/N/PE

Stock# U2308-7 Used stainless steel contact parts polish made V type tumbling blender with total volume 4500 l. Working volume 3000 l. Mixer has two inspection/feeding inlets with bolted lids, each with diameter 450 mm. Central conical discharge with diameter 245 mm, with manually operated valve. There is an internal supporting shaft/baffle inside the mixing chamber. Machine is driven by el. motor 18.5 kW, 1480 rpm, 380 V, 50 hz, through belts and gearbox type WD650. Working rotation of mixing chamber up to 8 rpm. Supporting frames and operating platform designed in carbon steel. Includes technical documentation.

Floor oven Friedrich E3 6/8 -3 floors each 60x80cm -Upper and lower heat can be controlled separately -digital control -with fermentation chamber -with exhaust hood -can be used on wheels -Floor height 13.5cm -with fermentation chamber

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

We offer high-performance automatic vacuum can seamer based on Ferrum F240,F506G, F706G, F708G(4,6,8 heads) beverage seamer. The basic machine has been completely upgraded and adapted for vacuum food cans. These seaming machines are affordable relativle fast avaible and reliable for long time. Capacity from 350 to 750 cans/min. Lid diameter from 53 to 102 mm Can diameter from 50 to 99 mm Can height from 35 to 120 mm Standard equipment: • With progressive pre-vacuum feeder • With complete seaming tooling • With lid feeding system into the vacuum chamber • The machine has variable speed with frequency converter control • Independent synchronized infeed with frequency converter control • Main Electrical Control Cabinet INOX • Vacuum pump connection and controlled by main cabinet - Speeds below are guaranteed regardless of the type of the lids (standard NEO, ea ...

X working range max .: 2500 mm Y Working range max .: 1250 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 2700 W Beam on: 21.335 h Plate thickness St. Max .: 20 mm Plate thickness Va. Max .: 6 mm Plate thickness Al. Max .: 5 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 3,75-Lense - Cutting head with 7.5-Lense - Cutting head quick change device - metal sheet position detection system - high dynamic Yp-axis - Laser position diode - Programmable cutting gas/Pressure setting - Microweld - SprintLas - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - shut-down automation - Safety light barriers - ToPs 100 lite programming system - online diagnose tool - RJ  ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 5000 W Beam on: 15.151 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 12 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 9-Lense - Cutting head with 7.5-Lense - Cutting head with 3.75-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - PCS Process Control System (monitored piercing) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - autom. Injection cleaner - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Co ...

X working range max .: 4000 mm Y Working range max .: 2000 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 3200 W Beam on: 13.762 h Plate thickness St. Max .: 20 mm Plate thickness Va. Max .: 12 mm Plate thickness Al. Max .: 8 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 5-Lense - Cutting head with 7,5-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - tel ...

Fermentation chamber fermentation chamber WP Gärstar -Door stop on the left -for 4 Stikkenwagen

Climatic test chamber ACS DY110 - Year of construction 2021 - Acquisition January 2022 - approx. 500 operating hours - Sale due to completion of product development / testing Specifications: - Dimensions test room: 548 x 447 x 447 mm - Test chamber volume: 110 l - Working range temperature tests: -40 to +180°C - Working range climate tests: +10 to +95 °C and 10 to 95 % relative humidity - Nominal power 3 kW, connection to 1/N/PE AC 230V 50Hz via CEE Qualifications: - 2006/42/CE Machinery Directive - 2014/35/UE Low Voltage Directive - 2014/30/EU Electromagnetic Compatibility Directive - IEC 61439-1/2 Low Voltage Switchgear Assemblies - IEC-60204-1 Safety of machinery - Electrical equipment of machinery - IEC 61000-5-2 Installation and Interference Suppression Guidelines - Section 2: Grounding and Wiring - IEC 61000-6-2 Generic Standards - Immunity Standard for Indu ...

Brick production plant consisting of: 1. OMAG Tronic 140/90 brick forming machine, built in 1992 2. Lifting ladder 3. Curing chamber (not included) 4. Vehicle group built in 2014 5. Countersunk scaffold 6. Stone Solver 7. Stone Doppler 8. Stone sliding table 9. Packaging, year of construction 2012 10. Board brush 11. Board turner 12. Board stacker 13. Board Stack Buffer 14. Board destacker 15. Plate Tape 16. Strapping not included Concrete Block production plant consisting of: 1. block making machine OMAG Tronic 140/90 built in 1992 2. Lifting ladder 3. curing chamber (not included) 4. vehicle group built in 2014 5. lowering ladder 6. Stone Pusher 7. Stone Layer Doubler 8. stone sliding table 9. packaging, year of construction 2012 10. Board Brush 11. Board Turner 12. Board Stacking Device 13. Board Stacking Buffer 14. Board Destacker  ...

Pin mill Netzsch Type CUM 250 Equipped with a temperature probe in the grinding chamber Year of manufacture: 1992 Engine power: 10 kilowatts Materials in contact with product: stainless steel Equipped with a safety system for the opening of the grinding chamber.

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indust ...

Key data: 300 mm, 1200 , 670

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional equipment: bushing for thermocouples I-Ø 44 mm -Connected load: max 9.3 KW -Fan capacity : approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Net weight : 450 kg - Documentation, CE declaratio ...

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Two-shaft shredder KS 1000/2 INDIVIDUAL - ADAPTABLE - ON YOUR RIGHTS Product information The 2-wave shredder KS 1000/2 is a powerful shredder that has a completely mechanically machined, solid grinding chamber. It is composed of 4 parts which are completely plugged into each other and screwed together, this gives an enormous stability and is very maintenance-friendly. The machine is powered by 2 high-performance electric motors that drive hexwaves running against each other via high-quality and robust planetary gearboxes 2. The hexagonal shafts can be equipped with individually made cutting discs of different thicknesses. The grinding chamber of the KS 1000/2 is double protected by wear plates and wear rings and is therefore completely armoured against wear. specifications: -Cutting room: 1000×600 -Drive: 2x15kW -Speed per shaft: 16.5 rpm -Advantage: Constant torq ...

Description for use in the laboratory and for production Round drying chamber Two-chamber systems with separation valve Folding door Materiali Stainless steel 316TI, 316L Solvent capacitors Automatic cleaning CIP Process visualization Product shells Explosion protection Version GMP compliant version Documentation / qualification from year 2015 Purchase price per piece was 40,000 euros plus VAT purchased for dehumidification of paper i.e. the inserts with the roll transport can be removed

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Cooking cabinet made by ASCOTT, built in 2014, in a very good used and functional condition. Completely made of stainless steel. Chamber volume 3000 litres. Aditec digital control. Chamber size B/T/H 155/105/185 cm. External dimension B/D/H 195/135/275 cm. Natural gas connection required, electricity connection 230 volts. Workshop-tested, ready for immediate use. Further on request.