chamber used for sale

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...

Filling system for sprouted vegetables, consisting of:, - Plate conveyor belt for containers, runs through chamber filler, - Product feed hopper for feed screw, Dimensions feed hopper: L x W x H = 850 x 800 x 400 mm, - Feed screw for product, Distance between the screw flights: approx. 160 mm,, Screw diameter: approx. 320 mm, length: approx. 8000 mm, - Belt conveyor belt make Niko type 02703022, machine number 403980,, blue smooth belt: approx. 2100 mm, usable width: approx. 340 mm, Belt conveyor belt for product transfer from the feed screw to the multihead weigher, - Multihead weigher with 14 heads, corrugated stainless steel sheet, make Klinger, type CW14, opening of the weighing container approx. 140 x 130 mm, - Stainless steel platform for multi-head weigher, Dimensions: approx. 3500 x 3500 mm, plateau height approx. 3000 mm, - Chamber filler TK 12, type 381, machine number 40395/01 ...

Description: Soft-start fluid coupling for demanding drives in the material handling and processing industry. Features: constant-fill hydraulic fluid annular chamber delay chamber similar to type TVV extremely smooth startup coupling with enlarged delay chamber and annular chamber shell automatic adjustment to different load states Typical application areas: Belt Conveyors (with higher capacities and lengths)  , Dimensions in mm:  , A D L d1 max. d2 max. l2 max. 567 877 730 150 135 240 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,500 mm, weight approx.: 830 kg

Basic refurbished Parta U II Cladding sheets new made of stainless steel All wear parts are renewed, Machine is completely rebuilt, Chamber and rotary vane correspond to a new machine, incl. 2 Mehler/ Or Öler Conveyor belt right/left defined position stop stepless speed control Warranty 6 months Suitable for different doughs Weight ranges: 1 chamber 300-2800gr 2 Chamber 110-1250gr Optional: Drop wave Large funnel etc Machine can be tested with dough at any time Delivery and commissioning as well as training possible.

Ultrasonic cleaner GT85 GT 2000-3P built in 2008. The washing tub is made of 316L stainless steel, the other tubs are made of 304 stainless steel and the supporting structure is made of structural steel. The volume of washed products should not exceed (LxWxH) 2400 x 600 x 600 mm Industrial washer - technical data: - external dimensions (LxWxH): 6400 x 4400 x 2800 mm - usable dimensions: chamber I (washing and phosphatizing): 2800 x 800 x 900 mm - useful dimensions: chamber II (rinsing): 2800 x 800 x 900 mm - usable dimensions: chamber III (drying): 2800 x 800 x 900 mm - power consumption: 63 kW - total weight: 2500 kg Bathtub 1: - preparation type: Ruster P02, Roklin P11 - pH: 2-4 - bath operating temperature: 20-60 degrees C - total bath capacity: 2000 l - maximum product weight: 500 kg - maximum product volume: 250 dm3 Bathtub 2: - type of preparation: tap water  ...

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...

Used stainless steel cooker made by Milfor Olsztyn. Working volume 150 L. Total chamber volume 200 L. Height 2300 mm, lenght 1520 mm, width 1130 mm, weight 1300 kg. Steam usage 120 kg/h. Max ressure in chamber 0,16 MPa. Agitator speed 50 rpm. Agitator's motor 1,1 KW. Unit has bottom driven cutting knifes. Heating jacket on the chamber. Batch is heated also by direct steam nozzles. Cover has opening and closing mechanism

Professional vacuum packaging machine with stainless chamber, industrial pump, additional deep chamber and digital panel, possibility to connect to gas floor model PM-VC-400-UIG Manufacturer: Rotek, Austria; Digital panel for 50 operations and more additional functions; Built-in vacuum pump 20m³/h; Gas connection outlet/may not be used/; 2 strips for simultaneous sealing of two bags; 13 cm wide to 40 cm long at sealing seam; Deep camera – up to 260 mm; Automatic lid opening after packaging; Easy-to-use machine, with a stainless chamber with a lower cabinet and wheels for movement; For smaller bags, you can pack several together; Suitable for bags with a length of 40 cm. Through the digital panel, 50 different programs can be saved - for vacuum, for sticking, cooling time Vacuuming starts immediately after closing the lid and then the panel should ...

Stock # U2397-2 Used stainless steel horizontal twin ribbon mixer by Laska (AT) model ME3000. Machine has internal dimensions of mixing chamber W 1505 mm x L 2005 mm x D 1170 mm. Total volume of mixing chamber 3000 l. Working volume in range from 2100 l up to 2400 l, and weight of batch up to 2400 kg. Mixer has twin shafts with welded ribbons. Each shaft is driven by el. motor 11/7.5 kW, 2880/1450 rpm, 380 V, 50 hz, via reducer and chain. Working rotation of each shaft 36/71 rpm. Mixer has top open. Discharge through two front wall outlets, equipped with two lids designed in teflon and operated via hydraulical actuators. Mixer has hydraulical device driven by el. motor 1.5 kW, builded inside supporting pedestal. Mixer is mounted on four tension cells. Machine has connection pipe for feeding liquid inside the mixing chamber during the work. Mixer is equipped with stainless steel lifti ...

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Qty 1 x HF/Pomini VIC95X (IM110VIC), Hydraulic hopper (IM90-E type), Refurbished complete chamber and hopper installed new in August 2016, Machine number: 487, year of rebuilding 2014, CE marked, Chamber volume approx: 104Litre, Useful volume at 0.75FF: 78Litre, Batch weight at SG 1.15: 90kg, Hydraulic dust seals (PYH Type), Hydraulic drop door with linear actuator and toggle latch, Rotor geometry adjusted by 2 x 2.2kw, 1420rpm motors, Unidrive gearbox, Ratio 20.6:1, With Ansaldo 352KW, 1030/1230rpm, 875Amp, 440V water cooled DC variable speed motor. Siemens S7 PLC control system (cpu 315-2DP, step 7). Complete and in very good working condition. All manuals and documentation available. Used spare chamber parts available/included:- Qty 1 set (2pc) used rotors Qty 2 sets (4pc) used drilled sides Qty 2pc used door tops Qty 1pc used weight The mixer has now been r ...

Stock# U2403-1 Used stainless steel homogenizing mixer by Brogtec (CH) model MH-8. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor  ...

Drying oven, curring oven chanel, chamber with fans Working temperature: 130 C° Max temperature: 200 C° 2 chamber Chamber 30 m3 Open size : 90x120 cm Heating capacity 110 kW 72 heating elements

Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

ACS Angelantoni Climatic Chamber Here we offer an ACS climatic chamber. ACS Angelantoni climatic chamber water-cooled Capacity: 500 litres External dimensions: width 1230 mm x height 2350 mm x depth 2600 mm Interior dimensions: width 815 mm x height 910 mm x depth 800 mm Temperature range: -70°C to +100°C Humidity range 20% to 95% relative humidity Connection: 400 V / 3 +N+T 50 Hz Energy requirement: max. 20 kW (new vacuum pump installed) Weight: 2000 kg Refrigerant: R404a/R23 Type: ACS UD 500 C Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.

Cleanming and Degreasing Plant Part washing system - Part cleaning system - Degreasing system Manufacturer: Reintec Previously used detergents / detergents: acetone, caustic soda Previous use: Cleaning of cast resin molded parts System and workpiece holders stainless steel Spray washing process 3-chamber system Inner chamber: washing chamber with nozzle system Outer chambers for reciprocal assembly of washing baskets Mounting systems or baskets for various workpiece shapes and dimensions available Dimensions total approx. 600 x 130 x height 200 cm

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

Key data: 650 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 Hz, without RCD -Documentation Viewing in our warehouse by appointment.

Key data: 850 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (according to connection voltage) -Fan capacity : approx. 500 m³/h -Connection: 380- 400- 415V 3/PE 50 Hz, without RCD circuit breaker -Documentation Viewing in our warehouse by appointment.

This combi steamer from the premium manufacturer Rational is a CombiMaster® Plus with 20 x 1/1 Gastronorm inserts in electric design. Please note that this device is in extremely well-maintained condition. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 18,920 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment s ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric version from 2012. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 27,110 net. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6 months warranty on all electri ...

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

Astell ASB 290 is a front-loading industrial lab autoclave for the sterilisation of lab equipment in medical, manufacturing and testing labs. The chamber has a 275 litre capacity. Volume: 275L Chamber diameter 600mm Chamber Depth: 885mm Loading Height: 730mm two machines available price each

Key data: 450 mm

We always have convection chamber furnaces on offer. Give us a call! Very good condition, 12 months warranty -free-standing, on base -Temperature max.: 450 °C -Volume of furnace chamber: 250 liters -Exterior: 1002+225 x 1636 x 1860 mm(W x D x H) -Furnace chamber: 600 x 750 x 600 mm (W x D x H) -Controller C280, 9 programs each with 4 segments -Temperature uniformity: ± 6°C according to DIN 17052-1 -strong air circulation, air guide box for optimal air flow -Supply and exhaust air flap manual -Connection flange for supply air fan under furnace -Permissible batch weight: 125 kg with distributed load per rack -1 bottom plate incl. -2 slide-in plates additionally available on request -Connected load: max 13 KW -3phase -Documentation -Weight 610 kg Viewing in our warehouse by appointment.

TECHNICAL SPECIFICATIONS (Cone Mixer) Manufacturer: KNIELE Name: Cone Mixer Type: KKM 2000 / 3000 Version: with bevel gear Year of construction: 2008 Output quantity: 2.0 cbm Capacity: 3,000 l Three-phase motor agitator inside: 45 kW Three-phase motor agitator outside: 37 kW Mixer lining: Ceramic Mixing system for ready-mixed concrete consisting of: - KNIELE Cone Mixer KKM 2000 / 3000 - Elevator system with bucket - Feeder scale - Cement scale - Water dosing system - 1 x 100 t cement silo (double chamber) - 1 x 80 t cement silo (double chamber) - 1 x 60 t cement silo (double chamber) SPECIFIC COMMENT - Aggregate storage for the most part no longer usable - Machines will be dismantled in the near future and ready for loading If you are interested, we can send you a more detailed offer with photo documentation. EuroConsult Dimitrios Piretzidis

Type: 1594 Chamber width: 1400 mm Chamber height: 830 mm Chamber depth: 2500 mm 220V 136 amp 45 kW Max temperature: 400° C Power needed: 45 kW Voltage: 220V

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 10 x 1/1 Gastronorm inserts in gas version, built in 2012. The device is tested, overhauled and fully functional in our in-house workshop. The RRP. for the device is € 11,950 net The price quoted is net plus 19% VAT. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our used equipment service for you: • 6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back • Shipping or pick-up can be flexibly selected • Expert advice - before and after the purchase • Provision ...

This is a combi steamer from the manufacturer Rational, type CM 61 in electric version. The pictured base is not part of the offer, but can be purchased as an option. The combi steamer has been overhauled in our in-house workshop and the device is fully functional. Our used equipment service for you: •3 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Modes: •Hot air 30°C to 300°C •Combination of steam and hot air 30°C to 300°C •Vario steaming at 30°C to 99°C •Finishing •Steaming at 100 ...

Single-seam sealing Single-seam sealing top/bottom Double-seam sealing Double-seam sealing top/bottom Filling plates Automatic chamber lid mechanism Roller conveyor Stainless steel sloping insert Vacuum filter Liquid separator Suction throttle Machine dimensions W x D x H (with open chamber lid) in mm: 880 x 785 x 1480 Chamber dimensions W x D x H in mm: 650 x 450 x 170/250/330/380 Pump capacity in m3/h: 100/150 Delivery time: 30 working days after advanced payment

Stock# UG6361 Used stainless steel double cone vacuum dryer blender made in China, type SYZG-50. Contact parts made of stainless steel AISI 316L. Total capacity of the chamber is 50 l. Working volume is up to 25 l and the load weight ranges from 10 kg to 25 kg. Drying chamber is designed to operate at a pressure up to -1 bar and is equipped with an internal vacuum pipe. The drum is covered with 2 kW electric heating mats and is insulated with wool and is covered with SS AISI 304 on the outside. Inlet and outlet are equipped with lockable covers. Drum working speed up to 6 rpm. The chamber is mounted on frame made of stainless steel. Device is equipped with an local electric control panel and a vacuum pump with a water ring. Overall dimensions: length 1500 mm, width 1250 mm, height 750 mm, weight 400 kg.

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

We sell here a Zwick Roell tensile and compression testing machine Zwick Roell Z020 TE BT2-FR020TE-A50 with Testcontrol II and TestXpert software. The machine is in a tagless condition and fully functional! More photos will follow! Test force: 20kN Test chamber width: 440mm Height of lower test chamber: 1785mm Modern load frame design • The drive is provided by maintenance-free, digital controlled AC drive technology. In combination with the innovative engine feedback system mdfhl37nql even at the lowest speeds, the best synchronization properties. • The testing machines are equipped with a patented rigid hollow chamber profile with guide cylinder equipped. The large guide length and surface ensure high-precision truss guidance. This combination eliminates undesirable mechanical influences on the sample are minimized. • The T-slots integrated in the profile g ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric design. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. Availability from week 8 The RRP. for this combi steamer is € 27,110 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment se ...

General SKU211N045 LocationBarneveld Specified Features - Tray dryer Material finishCoating Main Features MaterialCoated Volume1000 Ltr. Surface4.3 m2 Tray dryers Tray dryerunknown, manufacturer tag is missing Coated housingcheck Coated trayscheck Heating surface4,3 m2 Drying chamber capacity± 1000 Ltr Drying chamber sizesdia. 1100 x 1050mm Number of trays6x Tray sizes720 x 1000mm Distance between the trays100mm With containerscheck Container sizes700 x 1000mm With 1 doorcheck Connection for the vacuum pumpdia. 50mm Connections2x dia. 40mm Information Floorspace1,9 x 1,4 M Total height1,9 M Weight1590 KG Technical specs Extra informationdrying chamber: dia. 1100 x 1050 mm: container: 700 x 1000 mm Tray dryers-Dryers > Tray dryersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

General SKU211N044 LocationBarneveld Specified Features - Tray dryer Material finishCoating Main Features MaterialCoated Volume1000 Ltr. Surface4.3 m2 Tray dryers Tray dryerunknown, manufacturer tag is missing Coated housingcheck Coated trayscheck Heating surface4,3 m2 Drying chamber capacity± 1000 Ltr Drying chamber sizesdia. 1100mm x 1050mm Number of trays6x Tray sizes720 check 1000mm Distance between the trays100mm With containerscheck Container sizes700 x 1000mm With 1 doorcheck Connection for the vacuum pumpdia. 50mm Connections2x dia. 40mm Information Mounted on framecheck Floorspace1,9 x 1,4 M Total height1,9 M Weight1590 KG Technical specs Extra informationdrying chamber: dia. 1100 x 1050 mm: container: 700 x 1000 mm Tray dryers-Dryers > Tray dryersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price co ...

General SKU354T965 LocationBarneveld MakeUS Roaster Corp. TypeCoffee roaster No.1217 Year of constructionunknown Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) Motor0.55kW, 230/500 Volt Information Total height1,9 m Weight910 kg Floor space2x2 m Extra SpecificationsThis coffee bean roaster is electrically heated. Six heat spirals are mounted under the drum, with the hot air rising and being exhausted by a fan through the mixing chamber and blown off to a cyclone. The coffee roaster can be filled through the hopper. When ready, the beans can be unloaded by manually opening a valve. The beans enter the cooling vessel with grid. The built-in blower blows cool air through the beans. The vessel is fitted with an agitator to cool the beans evenly Product chamber size: Dia:450 x510 mm Feed hopper: 400m ...

Manufacturer Angelantoni ACS Model DY 110 Operating condition Used (as good as new) Year of construction2021 Value added tax Deductible DescriptionClimate test chamber ACS DY110 - Year of construction 2021 - Acquisition January 2022 - approx. 500 operating hours - Sale due to completion of product development / testing Technical data: - Test chamber dimensions: 548 x 447 x 447 mm - Test chamber volume: 110 litres - Working range temperature tests: -40 to +180°C - Working range of climate tests: +10 to +95 °C and 10 to 95 % relative humidity - Rated power 3 kW, connection to 1/N/PE AC 230V 50Hz via CEE Qualifications: - 2006/42/CE Machinery Directive - 2014/35/UE Low Voltage Directive - 2014/30/UE Electromagnetic Compatibility Directive - IEC 61439-1/2 Low-voltage switchgear and controlgear assemblies - IEC-60204-1 Safety of machinery - Electrical equipment  ...

Used in Oil and gas exploration and Petroleum Refinery. The liquid flows through the bundle of tubes in a chamber where the exchange of heat occurs. It is mostly suited for high pressure applications. Two fluids flow through the chamber with different temperatures one through the tubes and other flows inside the chamber. A heat exchanger is a device used to transfer heat between two or more fluids. There are different categories of tubular heat exchangers; one of the most common is the shell and tube exchanger. A shell and tube exchanger consists of a number of tubes mounted inside a cylindrical shell. Two fluids can exchange heat: one fluid flows over the outside of the tubes while the second fluid flows through the tubes. The fluids can be single or two phases and can flow in a parallel or a cross/counter flow arrangement. The shell and tube exchanger consists of four major  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Type: XL6804VH Max 300° chamber height: 1700 mm chamber width: 2100 mm chamber depth: 1850 mm 49 kW Kind of: furnace Max temperature: 300° Power needed: 49 kW