chamber furnace used for sale

x-travel: 550 mm y-travel: 400 mm z-travel: 360 mm b-axis: +/- 110 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 530 spindle taper: HSK63 spindle turning speed - stepless: 20000 U/min tools in tool magazin: 48 weight of the machine ca.: 10 t dimensions of the machine ca.: 3 x 5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible.

Key data: 300 °C

Technical data: Manufacturer: Vötsch Type: NTL 60/60 Year of Make: 1999 Usable space:0.2 m³ Nominal power: 7.2 kW Nominal temperature: 300 °C Steam room: 0.39 m³ Minimum exhaust air volume flow: 0.2 m³ Condition Condition: Used Functional: tested and fully functional

Rated temperature: 1100°C Usable dimensions (WxDxH): 200 x 300 x 150 mm electr. Connection: 230 V, 1.4 kW Heating time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Description: Vacuum hardening furnace XRETORT 700/25 series Year of Make: 2000 Info: Vacuum furnace system with control unit with pumping station and inert gas system The system stood around for a long time and is not calibrated. Vacuum pump is not included.

A Dentsply porcelain firing furnace for dental laboratories is available. Power: approx. 1.2kW, max. temperature: 1200°C, weight: approx. 30kg. An on-site inspection is possible.

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - .ucymachines/ Contact us at - sales@ucymachines

max. temperature: 1280 Grad size of opening: 350 x 250 mm depth of chamber: 500 mm volume: 41 L voltage: 400 V total power requirement: 15,0 kW weight of the machine ca.: 265 kg dimensions of the machine ca.: m - Serial-No.: 305266 - control: NABERTHERM B150 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible.

A microprocessor-controlled dental ceramic firing furnace is available. Firing temperature: 1200°C, firing chamber diameter: 85mm, firing chamber height: 67mm, machine dimensions X/Y/Z: approx. 280mm/430mm/410mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible.

A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible.

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrically heated bogie hearth furnace for a maximum operating temperature of 1,300°C (brick lining designed for up to 1,400°C). Incl. 1 piece of hearth wagon (track-bound) and switchgear (built in 2004). Electrical power: Approx. 170 kW, dimensions usable space (WxDxH): 1,450 mm x 2,600 mm x 1,400 mm.

max. temperature: 1100 Grad voltage: 230 V output: 3 kw range - high tensile: Innen 295x230x125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hardening furnace Lg.Nr. 26164 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 1200 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Interior dimensions approx. W 350 x H 250 x D 770 mm - Usable volume 41 L - Space requirement approx. W 950 x H 1370 x D 1600 mm - Weight approx. 400 kg

The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 250 °c width: . mm height: mm depth: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No.8505548 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating chamber dimensions: approx. 550 x 440 x 400 mm (400 mm depth) Temperature range: up to approx. 200°C Reference: Wup - Lot 6 Auction-ID: A7-49056-64

Melting and holding furnace StrikoWestofen MH II-T 6000/3500 G-eg, built in 2021, heating capacity 2,600 kW, capacity 6,000 kg, melting capacity 3,500 kg/h, max. melting pool temperature 760°C, max. furnace room temperature 1,050°C, height approx. 8,043 mm, with Striko K2000E feeder, built in 2021, with elevator for transport boxes

Machine number: 47537 Operating voltage: 220 V Frequency: 50 Hz Rated current: 14.5 A Connection: 3.2 kW Max. temperature: 1200 °C Internal dimensions: 450 x 300 x 300 mm Reference: STS - Lot 12 Auction-ID: A7-49056-253

Melting furnace ZPF Therm ST-G3 T 10 CHHTETWWK, built in 2012, loading weight 9,000 kg, with loading lift (No. ZPF Therm 2), plus processing platform, 2 slag storage tanks, preheating chamber for aluminium ZPF VWK5.2, built in 2012, heated by waste heat, with chimney

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...

A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 38 kW degree: 500 Grad weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: 1150 ° muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mm total power requirement: 3 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,8 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MARENO EVO10X ist ein Härteofen/Trockenofen für Präzision, hohe Genauigkeit und Zuverlässigkeit. Nutzraum: B350 x H600 x T600 mm. Technische Daten: Max. Temperatur 270 °C; installierte Leistung 16 kW; Anschluss 50 Hz 3x 400 V; Außenmaße L1000 x B800 x H1800 mm. Ermöglicht kontrollierte Wärmezyklen zur Erzielung enger Toleranzen; Einsatzbereiche: Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie, Werkzeugmaschinenbau. Technische Daten ohne Gewähr

DE NABERTHERM N 4000/60HAS ist ein Umluftofen für Wärmebehandlungen mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Nutzraum 1300×1000×2000 mm (4000 l), Ladegewicht max. 3000 kg. 400–600 °C (max. 600 °C); Ventilator 9000 m3/h; Heizleistung 60 kW; install. Leistung 70 kW; Anschluss 3×400 V 50 Hz; Außenmaße 3700×2700×3100 mm. Zubehör: Wasserabschreckbad 2500 l, Zustandsleuchte. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SAFED NIT 17 ist ein Härteofen hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit bei Wärmebehandlungen. Maximale Temperatur 1000 °C. Heizleistung 7 kW; Gesamtinstallierte Leistung 28 kW; Anschluss 50 Hz, 3x 380 V. Maschinengewicht ca. 600 kg; Abmessungen L×B×H 5800×1200×1800 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft- und Raumfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SOLO 221-15/25 ist ein Anlassofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Volumen 4,5 l; maximale Temperatur 650 °C, geeignet für Wärmebehandlungen kleiner bis mittlerer Werkstücke. Technische Daten: installierte Leistung 4 kW; Anschluss 50 Hz, 3x 400 Volt. Ermöglicht enge thermische Toleranzen und ist geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

BOREL 4.5 / 650 S ist ein Härteofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Maximale Temperatur: 650 °C; Volumen: 4.5 l. Anschluss: 50 Hz, 3x 400 Volt. Erzielt enge Toleranzen und eignet sich für Branchen wie Automotive, Luftfahrt, Werkzeugmaschinen, Medizintechnik und Uhrmacherei Technische Daten ohne Gewähr

SAFED 6SGR50/70 ist ein Härteofen, ausgelegt für präzise, hochgenaue und zuverlässige Härteprozesse. Maximale Temperatur: 650 °C. Anschluss: 50 Hz, 3x 400 Volt; Anschlussleistung: 3.5 kW. Entwickelt für konstante und reproduzierbare Wärmebehandlungen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

Key data: 300 °C, 1000 mm, 800 mm

Technical data Manufacturer: Steel Type: 8220 Type: Industrial Furnace / Chamber Furnace Condition: Used Other technical data according to the nameplate Facilities Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working area Suitable for professional use Areas of application Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Interior chamber dimensions: B1000 H1000 T800

Used TEL Alpha-8SE-E Vertical Gas Diffusion Furnace Manufacturer: TEL Tokyo Electron Model: Alpha-8SE-E Manufactured: 11.2000 Sr. No. M000000Y5670 No books or documentation. Pumps/Motor: 2 x Toshiba 3 phase induction motor. 480 Volts, 60 Hz. Auction-ID: A1-48529-39

Last maintenance in 2024 Auction-ID: A1-49186-127

Last maintenance in 2024 Auction-ID: A1-49186-125

Two dental furnaces are offered, one Zirkonzahn sintering furnace and one Nabertherm preheating furnace. 1) Zirkonzahn Keramikofen 1500 sintering furnace, Year of manufacture: 2006, with control unit, firing chamber volume: approx. 0.6l, maximum temperature: 1500°C, power: 1500W, furnace weight: approx. 75kg, furnace dimensions X/Y/Z: approx. 390mm/690mm/490mm. 2) Nabertherm preheating furnace in need of repair with P 320 controller, program memory: 9 programs, program steps: 16, chamber volume: 9l, maximum temperature: 1100°C, when the Nabertherm furnace is switched on, an ERROR message with an error code appears, the exact cause of the fault is unknown. An on-site inspection is possible.

x-travel: 800 mm y-travel: 900 mm z-travel: 620 mm b-axis: +/- 120 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 640 spindle taper: HSK 63 spindle turning speed - stepless: 15000 U/min tools in tool magazin: 64 total power requirement: 10/17 kW weight of the machine ca.: 21.5 t dimensions of the machine ca.: 3 x 4.5 x 3.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 °C

Manufacturer: Reinhardt Model: Titan 6700 Year: 2023 Condition: Used Stock number: 9482 Maximum temperature: 50-300 C Working Area: 6.7 m³

Offer 26187 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 900 ° - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door and floor - Motorized lifting door - T. max.ca. 120 min - Drive 400 V / 59 kW - Interior dimensions approx. W 1000 x H 550 x D 1900 mm - Usable volume approx. 950 L - Space requirement approx. W 2100 x H 2800 x D 2800 mm - Weight approx. 2900 kg

- 2 electric induction melting furnaces, with cylindrical steel body, tilting, capacity 12000 kg each, are included. - Approximate joint production capacity: 70,000 kg per 8-hour work shift. - For smelting iron at a maximum temperature of 1480 °C. - 2 URBAR RBA 90-100/560 feeder trolleys. - 2 PAWELS TS transformers: year of manufacture 2007, power 4850 kVA each. - Cooling installation with pumps and plate heat exchanger. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-6

Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-135

Conveyor system in front of furnace L x W x H 10.8m x 1.1m x 0.86m, with scissor table Auction-ID: A1-49382-3

Conveyor system in front of furnace L x W x H 10.8m x 1.1m x 0.86m, gas output 530kw, without ant Auction-ID: A1-49382-2

Max Weishaupt steam oven with oil burner, in very good maintained condition Length= approx. 190cm Width= approx. 100cm Height= approx. 180cm Auction-ID: A1-49805-6

Thermal process plant with nitrogen and formic acid supply, incl. Leybold vacuum pump and control system. Year of manufacture 2011. Well-maintained external condition, but without documentation and without available password – therefore only tested to a limited extent. Power 10 kW; Load current 25 A; Feed-in 3/N~ 400/230 V 50 Hz; Breaking capacity 0.3 kA; Operating hours approx. 21,286 h Auction-ID: A7-49816-99