chamber filter press used for sale

Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force., Capacity: 140 hl/h, Vessel volume: 26 hl, Length: approx. 4000 mm, Width: approx. 2000 mm, Height: approx. 3500 mm, Material: Stainless steel1.4541 (vessel), Base construction: on feet, Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology

Sheet filter with square filter elements hanging vertically, arranged row. Hydraulic filter sheet press. Control of the hydraulics from the built-in electrical control panel., Additional title: Sterilisation filter with 100 sheets of 100 x 100 cm, Operating pressure: 8 bar, Number of plates: 100 pcs, Plate area: 1 m2, Length: 5,5 m, Width: 1,5 m, Height: 2,3 m, Operation / Control: Control cabinet with operating buttons, Material: Stainless steel, Base construction: Frame, Features: Hydraulic press; control panel

If you are interested, please message

used H & K disinfection filter Filter frame: 1200x1200mm Nominal power: 20000 l / h

Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...

Filter control valve, switch-on valve, maintenance unit, water separator -Maintenance unit: with pressure regulator, filter and oiler -Dimensions: 230/260 / H70 mm -Weight: 2 kg

Mobile extraction for welding fumes, welding fume extraction Manufacturer Kemper Filter Master Type 64103 Year of construction 2005 Supply voltage 400V Volume flow 1,200 m³/h max.stat. Pressure 1.350 Pa Weight approx. 100kg

PATRONENFILTER FÜR PULVERBESCHICHTUNGSKABINEN Die Filter bestehen aus 100% reinem Polyester. Nachstehend sind die verfügbaren Standardgrößen aufgeführt 320x600mm 320x650mm 320x1000mm 320x1200mm Andere Größen und Spezifikationen können ebenfalls angefertigt werden. Kontaktieren Sie uns für weitere Informationen und Preise. für Pulverkabinen für Staubabscheider für automatische Maschinen für Pulverbeschichtungsanlagen hoher Wirkungsgrad antistatische Option Option Bajonettanschluss POWDER COATING BOOTH CARTRIDGE FILTERS Filters made of 100% pure polyester. Available standard sizes; 320x600mm 320x650mm 320x1000mm 320x1200mm Available polyester filter media density; 160 g/m2 200 g/m2 260 g/m2 Demands of different sizes and specifications can also be manufactured.

Manufacturer: KEB, Type: HF-Filter, Model: 18.E4.T60-3001, Hz: 50/60HZ, Power Output: 3x480VAC,

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Manufacturer: Filteranlage, Control: yes, Volume flow rate m³/h: 22000, Filter surface in m²: 138, Gesamtanschluss kw: 30,

Manufacturer: Filteranlage, Filter surface in m²: 120, Number of fans: 1, 1st transport fan - bunker kW: 22, Exhaust pipe diameter mm: 450, Exhaust pipe diameter mm: 450, Exhaust pipe diameter mm: 450, Exhaust pipe diameter mm: 450, Exhaust pipe diameter mm: 450,

Manufacturer: Filteranlage, Filter system - positive pressure: yes, Filter hoses: 42, Hose diameter in mm!: 180, Length of filter tubes: ca 1500, Electronic control board: yes, Number of fans: no, Collecting tank quantity: 5, Suction pipe diameter 1 mm: 180, FREE TEXT: mit Abrüttelung,

Manufacturer: Filteranlge, Control: yes, Year: ca.2000, Filter system - positive pressure: yes, Volume flow rate m³/h: ca.30000, Filter surface in m²: 280, Number of filter filter gallerys: 1, Return air capable: yes, Vibrator motors: yes, Star feeder: yes, Electronic control board: yes, Number of fans: 2, 1st transport fan - bunker kW: yes, Suction pipe diameter 1 mm: 560, 2nd Exhaust fan kW: ca.22, Year :ca.2000

A Nederman filter box extraction system is available. Filter: activated carbon, filter type: F7/F9/F11/activated carbon 1/activated carbon 2, power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/2500mm/1500mm. Including steel frame, piping and extraction hoods. Documentation available. On-site inspection is possible.

General SKU222W212 MakeDidier Filtertechnik GmbH No.2190 Year of construction2011 Mounted on legsand wheels Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitynetto ±550 Ltr. (bruto 700 Ltr.) Vessel sizesDia. 900x1300 mm Dished bottomcheck Dished top sidecheck Top connectionsDia. 50 mm (4x) OutletDia. 30 mm With jacketjacketed outlet valve Half coil jacketed12 Ltr. Max. temperature110°C With propellor stirrercheck Motor2,2 kW, 220/380 volt, 1400/571 rpm Speed mixing shaft571 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace1,0x1,0 m Total height3,15 m Weight600 kg ATEX designedcheckStainless Steel ReactorsDidier Filterte ...

Manufacturer: R & R Filteranlage, Type: RRFHS-650-JET, Year: 2009, Filter system - negative pressure: yes, Volume flow rate m³/h: 78.000, Filter surface in m²: 651,44, Qty. filter hoses: 324, Hose diameter in mm!: 160, Length of filter tubes: 4.000, Number of filter filter gallerys: 4, Return air capable: yes, Cleaning of scavenging air: yes, Star feeder: RTZ 100, Screw conveyor: yes, Number of fans: 5, 1st transport fan - bunker kW: 7,5, 2nd Exhaust fan kW: 37, 3rd Exhaust fan kW: 37, Suction pipe diameter 3 mm: 37, 5th extractor fan kW: 37, Container connection: möglich, FREE TEXT: Aufstellmass 4400 X 4400 mm + Ventilatoren Einhausung 4000 X 4000 mm, Year :2009

General SKU290P488 MakeHeinkel Aktiengesellschaft (DE) TypeHF 600 No.1083/11 Year of construction1988/2003 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Inlet diameter600 mm Specified Features - Basket centrifuge Basket centrifugeInverting filter centrifuge Rubber linedTFE Capacity52 Ltr Basket sizesdia.600mm x220mm Max. loading weight65 KG Liquid outlet125x125mm Hydraulic drivefor discharge With hydraulic unitcheck Motorfor rotation 22 KW, 400 Volt (EExde IIC T4) Max. basket speed1936 rpm Max. temperature100 degr.C, MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace3,0x1,0 M Total height1,5 M Weight2700 KGBasket centrifugesHeinkelCentrifuges > Basket centrifugesBrand > Heinkel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU085C512 MakeSparkler Filters Type33-S-11 Reverse Flow No.H-3301 Year of construction1996 Mounted on legscheck Specified Features - Horizontal plate filter Material finishHalar coating inside Pressure Working pressure1 Bar Main Features MaterialStainless steel Surface5.5 m2 Cake110 Ltr. Horizontal plate filters Plate filter(1x) Filter surface5,5 m2 Number of platens10, Filter plates in PP execution Platen sizesdia. 800mm, Vessel dia. 950x768mm Max. temperature100 Degr. C. Cake capacity110 Ltr With pump/hydraulic unit MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchcheck Floorspace1,2x1,0 M Total height2,1 M Weight2000 KGDiscountHorizontal plate filtersSparklerDiscountFilters > Horizontal plate filtersBrand > Sparkler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

General SKU123X722 MakePannevis TypeRT/PT 0,25 x 2 mtr No.1645 Year of construction1994 LocationBarneveld Dimensions Filter width25 cm Filter length200 cm Main Features MaterialStainless steel Motor0.25 KW Surface0.5 m2 Specified Features - Vacuum belt filter Vacuum belt filterin pressure tight housing Filter surface0,5 m² Filter width250 mm Filter length2000 mm Number of sections:4 (3x 400 mm + 1x 800mm) With motor0,25 kW (400 V, (Ex)) With variable speed drivecheck Belt speed± 15-85 m/h Knife dischargecheck With vacuum pumpmake SIHI With liquid pumpcheck MaterialStainless steel 1.4571 (316Ti) With jacketcheck General With switchgearDim. 1,4x0,5x2,2 m Floorspacefilter 4,0 x 2,1 m Total height2,7 m Weight8000 kg ATEX designedcheck Extra Specifications- Housing vac/6 bar, - Test pressure 11,7 barDiscountVacuum belt filtersPannevisDiscountFilters > Vacu ...

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

General SKU013X039 MakeHeinkel TypeHF-300 No.1013/12 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Motor1.35 KW Inlet diameter300 mm Specified Features - Basket centrifuge Basket centrifugecheck Inverting filter centrifuge Basket sizesdia. 300mm Max. loading weight8,2 kg Hydraulic drivecheck With hydraulic unitcheck Max. basket speed3464 Rpm MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck (as is) 1,2x0,4x1,5m 250kg and 0,6x0,4x0,8m 100 kg Floorspace1,7x1,1 m Total height2,1 m Weight1000 kgBasket centrifugesDiscountHeinkelCentrifuges > Basket centrifugesDiscountBrand > Heinkel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...

Key data: 7500 m³/h, 4 kPa, 8 kW

TEKA Filtercube 4H Welding Fume Extraction with Siemens Control & Spark Trap (built in 2021) For sale is a high-quality TEKA Filtercube 4H welding fume extraction system including Siemens control and integrated spark trap. The facility is in very good, well-maintained condition and has been regularly professionally maintained. It was reliable in industrial use until the end. Technical data: Manufacturer: TEKA Model: Filtercube 4H Year of Make: 2021 Power: 7.5 kW Volume flow: 4,800 m³/h Negative pressure: 18 mbar (1.8 kPa) Control: Siemens Control Integrated spark trap Scope of delivery: TEKA Filtercube 4H extraction system Integrated spark trap Siemens Control Not included: Extraction arms Piping / Piping System Condition & Use: Very good, well-maintained condition Regularly serviced Fully functional and ready to use Ideal for industrial welding fume ...

General SKU255X227 MakeComi-Condor LocationBarneveld TypeH.T. 600 GMR Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Motor22 KW Inlet diameter75 mm Specified Features - Pusher centrifuge Basket centrifugecheck Capacity52 l Basket sizesDia. 600 mm Max. loading weight65 kg Motor22 kW, 380 v Max. basket speed2000 rpm Max. temperature100°C With jacketcheck Pusher centrifuges Pusher centrifugecheck Basket diameter600 mm Max. loading weight65 kg Motor14 kW, 380 V, 150 rpm, (Ex) Max. basket speed2000 rpm Mechanical operated pushercheck Motor2,2 kW, 380 V., 950 rpm, (Ex) MaterialStainless steel 1.4404 (316L) General No.0878 Year of construction1993 Mounted on framecheck With switchgear(as is) Floorspace1,30x3,60 m Total height2,70 m Weight4000 kg Extra SpecificationsCake volume 52 dm3, slurry density 1,25 kg/dm3,filter surface 0,45 m ...

General SKU322S570 LocationBarneveld MakeQVF Glastechnik GmbH (D) TypeWashing, dissolving, filtering, precipitating and recovering installation Pressure Working pressure0.3 Bar Vacuum possiblecheck Main Features MaterialGlass Motor0.37 KW Specified Features - Glass-lined Reactor Capacity120 ltr (4x), 110 ltr. (1x) Vessel sizesdia. 595x480m (4x), dia. 400x750mm (1x) Max. temperature20 degr. C With propellor stirrer0,37 kW 230/400 Volt 175-775 rpm With paddle stirrercheck Motor0,25 kW 230/400 Volt Speed mixing shaft110-630 rpm With jacketcheck Glass Reactors MaterialGlass General No.155153/2214 Year of construction1995 Mounted on legsframe With switchgearas is Floorspace4,6x2,0 M Total height2,3 M Weight1800 Kg Extra SpecificationsQVF Glasstechnik Washing, dissolving, filtering, precipitating, and recovering installationThe entire installation is built in a t ...

General SKU044U253 MakeEurofiltec Rungis TypeFC-660AC No.54054/050443 Year of construction1995 Mounted on framecheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface2.5 m2 Cake160 Ltr. Specified Features - Horizontal plate filter Plate filter:Closed plate filter: (1x) Notified bodyTüV Filter surface± 2,5 m2 Number of platens8 Platen sizesdia. 660mm Between the plates60 mm Top connections1 Liquid outletcheck With jacket(35 Ltr) Max. temperature-20/+140 Degr. C. Cake capacity160 l With hydraulic drivecheck Motor1,5 kW (380 V(Ex)) MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld With switchcheck With switchgear(as is) Floorspace1,6 x 1,3 m Total height2,0 m Weight1600 ATEX designedcheckDiscountNew arrivalsHorizont ...

Hagesana Filter King TOP Model: F 20 Tabletop device Stainless steel version Connection 220V Used device

Droogscheider voor fijnstof Maximale luchtstroom: 7000 m³/uur 7,5 kW 12 filterelementen 93,8 filteroppervlak Afmetingen: 1800 x 1600 x 2700 mm Gewicht: 1430 kg

Ref.nr 00925 A and Ref.Nr 00926 B Please note in the video: the gray left Esta filter system is Ref.nr. 00925 A (sold separately) Ref.nr. 00925 B Designation of the system Filter + Extraction System Manufacturer Esta Extraction Technology Model EU 562-2 Year of construction ? KW 15 kW Volt 400/690 A 28 Hz 50 IP 55 B3 2930min Housing position LG 0 Remark: Outside under power Ref.nr. 00925 A Name of the filter system For sale is an ESTA Dustex F84 filter system for the extraction of grinding, polishing and processing dust. The system is suitable for industrial workplaces and ensures a clean working environment. Manufacturer: Esta Model Dustex F 84 Year of construction ? Research found: The ESTA DUSTMAC F-84 (often referred to synonymously with the Dustex F series) is a high-performance, IFA-certified central extraction system. It is special ...

The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces fre ...

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Weingarten Excenter Press

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

was used to fill sugar cane molasses into containers open lubrication Dimensions 700 x 500 x 1200 mm

IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Hours: 119 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and g ...