chamber filter press used for sale

Compressed air filter combination Atlas Copco PD 310+ QD 310+ Air flow rate 18,600 l/min Manufacturer Atlas Copco Type PD 310 + and QD 310 + Year of construction 2019 max. pressure 16 bar Delivery throughput 18,600 l/min Air connection 2 1/2\" lxwxh 45x17x78 cm Weight 22 kg Auction-ID: 047-DXU-3

Approx. 23 pieces, including pallet Auction-ID: A1-45495-451

Pocket filter with mechanical cleaning. - Filter bag with approx. 3m² filter area - Suction fan with silencer 1.1 kW up to 2000m³/h - Dust collection hopper with dust collection bucket - Filter control with plug - Can be used up to max. 10 m suction line - Year of construction 2024 (was only in operation for a short time for testing) - Food safe - Complete documentation available

General SKU392U1284 LocationBarneveld MakeSKAN Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4401 (316) Filtercheck Filter surface± 0,03 m² Information TypeAFS 002 Year of construction1992 Floor space1,1x0,95 m Total height1,8 m Weight230 kg Extra Specificationsdata vessel: brand: De jong gorredijk B.V. vollume: 100 Ltr. material: 1.4401 pressure: 4bar max temp.: 50°C year: 1992. flow meters: Brand: Endress+hauser type: promag 53 pump: brand: socsil-inter sa Type: A1 24000 nr: 10156 year: 1994 motor: 0,75kW, 220/380Volt 583rpm Miscellaneous filtersSolventsBiotechnologyFine chemicalsSKANFilters > Miscellaneous filtersIndustries > Chemical > SolventsIndustries > Chemical > BiotechnologyIndustries > Chemical > Fine chemicalsBrand > SKAN What you can expect from Foeth: -- Machine is in working condition -- At a r ...

Mobile. Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45162-2

Laser filter, filter area 30m², capacity 1800 Bm³/h

Used rotary vacuum filter from Dorr Oliver type Vacubloc – Drehfilter VT 8/10m2. Motor power 22kW. Year of manufacture 1983. Dimensions 769x900x210. Acid-resistant design.

Grease filter HAGESANA, grease filter in continuous process, 2 chamber filters - grease + oil purifier Filter-King F-20 Auction-ID: A7-45677-38

PUREGEN PGA 3672 SIMPLEX SYSTEM MAKE : PUREGEN GROUP OPERATION : AUTO BACKWASH SYSTEM DIMENSIONS : 36" Ø x 72" H FLOW RATE : ≈ 25 m3/hr MAX OPERATING PRESSURE : 150 PSI MATERIAL : STAINLESS STEEL SS304 WATER QUALITY : UP TO 10 MICRONS C/W JKKP DESIGN APPROVAL EACH FILTER C/W SUPER MICROSITE FILTRATION MEDIA WHICH CONSISTS OF 6 LAYERS OF ADVANCE DESIGNED MEDIA : ACTIVATED CARBON GREEN SAND SILICA SAND FINE SAND COARSE SAND QUARTZ STONE PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 04

Fleece filter bags WÜRTH 5 pcs. in bucket

Millipore Milliflex PLUS MXP PUMP 03 Model: MXP PLUS 03 With 3 microwire adapters 3 Filtration Pumps (Milliflex Plus) 3 x 24 W

Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Ma ...

Used vacuum-drum filter made by Padovan, type Taylo/Lux 20 MQ. Filtration area 20 m2. New: 2000

In stock on pallet, total dimensions approx. 1200x800x930 mm Auction-ID: A1-45790-584

In stock on pallet, total dimensions approx. 1200x800x1140 mm Auction-ID: A1-45790-583

In stock on pallet, total dimensions approx. 1200x800x1250 mm Auction-ID: A1-45790-585

13 pieces, mounted on frames, to be disassembled yourself. Pick up start of pick up day. Frames partly in scaffolding up to 2.5 meters high Auction-ID: A1-45411-292

Equipped with: (1x) ATB Loher electric motor (11 kW), (6x) dust collection containers. Including: piping to the machines. Auction-ID: A1-45979-300

Type: Condensate treatment unit Max. flow rate: Up to 10 m³/min (depending on model) Hydrocarbon concentration: < 10 mg/l (environmental compliance) Max. inlet pressure: 16 bar Connections: Inlet: 1/2\" BSP | Discharge: 1/2\" BSP Temperature range: Condensate & Control air: 1–60 °C | Ambient: 1–45 °C Material: Corrosion-resistant construction Maintenance: Easy access, quick filter replacement Dimensions (L x W x H): 600 x 400 x 800 mm Weight: ~20 kg Auction-ID: A7-45988-10

Type: Condensate treatment unit Max. compressor volume flow: Up to 10 m³/min (model dependent) Hydrocarbon concentration: < 10 mg/l (compliant with environmental standards) Max. inlet pressure: 16 bar Connections: Condensate inlet: 1/2\" BSP | Discharge: 1/2\" BSP Temperature range: Condensate/control air: 1–60 °C | Ambient: 1–45 °C Material: Corrosion-resistant, high-quality build Maintenance: Easy access, tool-free filter replacement Dimensions (L x W x H): 600 x 400 x 800 mm Weight: Approx. 20 kg Auction-ID: A7-45988-11

Trap filter housing for post-filtration of beer or other liquids. Available in any size, capacity and selectivity. Manufacturer: Sartorius/Seitz/Pall/Filtrox/Eaton Please let us know your application (medium, flow rate, selectivity) and we will find a suitable solution for you., Additional title: Post-filtration, Material: stainless steel, Position: free standing, Base construction: Cylindrical housing on tubular feet with spherical caps, Features: Pressure gauge, housing with clamping screws or clamping ring

Stationary sheet filter with quadratic filter elements in a row., Additional title: sterilisation filter, Capacity: 140 hl/h, Number of plates: 119 plates, Length: 7500 mm, Width: 1600 mm, Height: 2000 mm, Formats: Quadratic filter elements - 100 cm x 100 cm, Layer patterns: Vertical row arrangement of the filter elements

Schenk ZHF Kieselguhrfilter, Additional title: Kieselguhr filter, Capacity: 30 hl/h, Max. pressure: 6 bar, Max. temp.: 20 °C, Vessel content: 680 l, Operation / Control: manual operation, with buttons / switches on the control box, Material: stainless steel, Position: Fixed to the floor on a frame, Features: CIP heat exchanger with fittings, dosing vessel, dosing pump, control cabinet, electric motor for shaft drive

PVPP filter - Filtrox CHF with: - Filter vessel - PVPP batch dosing vessel - CIP station for regeneration - Swing bend panel for system integration - all pumps, fittings and field instruments - Control cabinet with control panel, Additional title: Centrifugal horizontal filter, Filter capacity: 20000 l/h, Volume: 16 hl, Operating pressure: 6 bar, Operating temperature: 100 °C, Systemic volume: 1620 Liter, Width: 1,2 m, Height: 2,85 m, Weight: 2500 kg, Operation / Control: Manual system, mainly with pneumatic valves, operation take splace on the control cabinet panel, Material: stainless steel, Features: Filter vessel with horizontal filter elements, stack dosing container with agitator, CIP system for regeneration, control cabinet with control panel, pumps, fittings and sensors

Activated carbon filter for the treatment of drinking water after treatment with chlorine dioxide, with pressure gauge and various connections., Additional title: drinking water treatment, Volume: 2250 l, Max. working temperature: 120 °C, Max. working pressure: 6 bar, Width: 1 m, Height: 3,5 m, Weight: 300 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: pressure gauge, various connections

plate filter, 60 x 60 cm with 142 plates, manual pressing., Number of plates: 142, Length: 3,6 m, Width: 0,8 m, Height: 1 m, Weight: 2000 kg

Pneumatic press, pneumatic press BOSCH type 0840 002 002Fabr. No. 041 Year of construction 1980Compressive force 18 KN = 1,8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 barprojection 100 mmram stroke 70 mmtable surface 245 x 200ram area 45 mminstallation height max. 235 mmClamping pin hole 20 mm with clamping screwCompressed air requirement 5 bar- Press force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger

The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liqui ...

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

The press is suitable for pressing meat in rectangular shapes Dimensions: 300 x 100 x 230 cm Compressed air approx. 8 bar

The BTS drum press PLC auto is ideal for compressing 30 to 220 litre steel drums, but it can also be used to compress plastic and cardboard drums very easily. In many cases this compressed recyclable material can then even be remarketed. The barrel press is particularly characterized by its reliable and easy operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, save significantly on your disposal costs and properly return the material to the recyclable material cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phases) Noise: 68 dB PLC control with automatic pressing cycle 30 litre drip pan with drain tap Pressing punch with mandrels for pi ...

Used Hydropneumatic Press / Assembly Press - Pressing force 10 KN (1 to) - Used hydropneumatic cylinder make TOX - Pneumatic two-hand control - Portal frame aluminum profile 90 90 mm - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 50 kg Suitable as an assembly press for insezing components. With x- and y-adjustment alignable vice for die diameters up to 80 mm. Or for small punching or embossing tools. All tools or vices are quickly changed through the groove system.

Pressure differential pressure switch -Type: QBM81.B -for flow and filter monitoring in air ducts -Setting range: 50...500 Pa Technical specifications: -Switching difference: adjustable -Output: EPU 250 V, 1(0.5) A -Weight 0.2 kg

Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

Hand spindle press, mandrel press, spindle press, hand spindle press, rotary mandrel press, rack and pinion press, workshop press -Ardent press. Rack and pinion press, heavy-duty design -Protrusion: 210 mm -Height: min. 35 mm / max. 350 mm -Dimensions: 435/230/H550 mm -Weight: 51 kg

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

System for pressure increase or constant pressure maintenance, e.g. for the fresh water inlet of bottle washers 1.5 m³ stainless steel tank with frequency-controlled pump (see pictures for performance) Level control

pressure:63 t throat:350 mm stroke:400 mm dayligth:650 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:3 x 1,9 x 2,7 m

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton

Ø 100, class 1.6 0 - 25 bar Version: Vertical Display range: 0 - 25 bar Scale graduation: 0.5 bar Materials: Housing 1.4571, measuring system and connection, viewing panel multi-layer safety glass Connection: 1/2'' bottom (AB) Plate spring pressure gauge

Screw press for cold pressing of oilseeds - Manufacturer: Reinartz - Type: AP 10/06 - Power: 7.5 kW - Processing capacity (rapeseed): 100 kg/h - Processing capacity (other oilseeds): 70 kg/h - Length: 1900 mm - Width: 600 mm - Height: 1100 mm - Weight: 900 kg

Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height