chamber filter press used for sale

BINDER MK 53 environmental simulation chamber, year 2014. Very good overall condition Equipment for cyclic temperature testing. The chamber allows heating and cooling tests to be performed in a temperature range of -40 °C to 180 °C. Equipped with APT.line™ preheating chamber technology, it simulates natural environmental conditions and is a suitable solution for cyclic temperature testing. Auction-ID: A1-49938-37

Climate chamber TD-010A for outdoor installation, 19 inch, including 2 battery modules of 5 kWh Climate chamber type TD-010A, suitable for outdoor installation. The cabinet offers space for an inverter and 10 lithium-ion battery modules in 19 inch size. Thanks to the built-in air conditioning and insulation, the contents remain within the right temperature even in full sun. The case is IP55 and therefore resistant to rain and dust. Two BlauHoff BLH-5KW 19 inch LFP battery modules of 5 kWh (together 10 kWh, 51.2 V) are included. The system is easily expandable with the same model: the cabinet offers space for a total of 10 modules, up to 50 kWh. Suitable for your own battery system with 19-inch rack batteries, and due to the standard 19-inch size, it can also be used as a server or network cabinet at a location without conditioned space. Specifications Type: TD-010A Version: climate ch ...

Climate chamber TD-010A for outdoor installation, 19 inch, including 2 battery modules of 5 kWh Climate chamber type TD-010A, suitable for outdoor installation. The cabinet offers space for an inverter and 10 lithium-ion battery modules in 19 inch size. Thanks to the built-in air conditioning and insulation, the contents remain within the right temperature even in full sun. The case is IP55 and therefore resistant to rain and dust. Two BlauHoff BLH-5KW 19 inch LFP battery modules of 5 kWh (together 10 kWh, 51.2 V) are included. The system is easily expandable with the same model: the cabinet offers space for a total of 10 modules, up to 50 kWh. Suitable for your own battery system with 19-inch rack batteries, and due to the standard 19-inch size, it can also be used as a server or network cabinet at a location without conditioned space. Specifications Type: TD-010A Version: climate ch ...

Maximum overall dimensions about 3000 × 4000 × 2700 about the cell add about 1000 mm for the compressor and air conditioner positioned above internal wall thickness 145 mm operating temperature -18 °C Auction-ID: A7-50524-915

Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter -Filter elements: hydraulic oil filter, fuel filter 478 pcs. -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H780 mm -Total weight: 236 kg

Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, spin-on filter -Filter elements: Hydraulic oil filter, fuel filter 485 pieces -Type: Various types from different manufacturers -Price/Sale: complete -Transport dimensions: 1200/800/H780 mm -Total weight: 291 kg

Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter -Filter elements: hydraulic oil filter, fuel filter 157 pieces -Type: Different types from different manufacturers -Price/tax: complete -Transport dimensions: 1200/800/H500 mm -Total weight: 162 kg

Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, spin-on filter -Condition: Original packaging, unused, very good -Filter elements: Hydraulic oil filter, fuel filter 540 pieces -Type: various types from different manufacturers -Price/Fee: complete -Transport dimensions: 1200/800/H800 mm -Total weight: 291 kg

Unused stainless steel filter housing with certificate and drawings THREE-SIXTEEN-L Housing, Part No. ALTD11GNW15ABH4, Lot M241217E01, year 2011, ATEX II 2 GD Auction-ID: A7-49816-170

Unused stainless steel filter housing with certificate and drawings THREE-SIXTEEN-L Housing, Part No. ALTD11GNW15ABH4, Lot M246774E01, year 2011, ATEX II 2 GD Auction-ID: A7-49816-171

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 (Mix) Plate size: 1200 x 1200 mm Membrane plates: 54 pieces Chamber plates: 55 pieces Membrane pressure: 15 mm Filter pressure: 10 bar Closing pressure: min. 350 bar, max. 380 bar Total filter area: 242 m2 Cake volume totalling: 4320 litres Number of filter presses: 2 pieces

Pressure leaf filter for filtration of vegetable oil - 8m² filter area - 720 litres - Pneumatically operated swing flap at the outlet - Including piping with valves - With control cabinet - Optionally with screw compressor

Pressureless dust filters for mounting on silos, material bunkers, etc. in standard steel version. Equipped with 20 pcs. fabric filter hoses (200 mm x 2,000 mm long each), incl. electric vibro cleaning. Filter area: Approx. 25 m2. In very good condition, several filters available (same construction).

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

hydraulic filter, filter element -Manufacturer: Hydac, ventilation filter with filling strainer -Type: ELF 5-210-3.0 -Dimensions: Ø 176 x 355 mm -Weight: 2.7 kg

Compressed air-cleaned dust filter with stainless steel housing, filter area: 10 m², filter media: 4 filter cartridges, incl. ESM-3 control unit and manifold for flange mounting on the underside. Filter was used for dedusting a horizontal mixer for mineral building materials.

Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high-pressure filter with clogging indicator / filter unit with 2 filters -Type: O-28P-1-10Q-M2-98-C2C2-1-1 / 0-24P-1-40W-M-1-2 -Number: 6x filter unit available -Price per unit -Dimension: 380/150/H250 mm -Weight: 20 kg/pc.

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Siemens, mains filter interference filter -Type: :B84131-M3-A116 -Voltage: 440/2500V 50 - 60Hz -Dimensions: 180/105/H50 mm Weight: 1.7 kg

filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete -Dimensions each: 800/100/H500 mm -Weight: 3.1 kg/piece

filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete -Dimensions each: 800/95/H500 mm -Weight: 4.5 kg/piece

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC Parker, Air Filter Air Breather Filter OVP -Type: SPA 7131 AB 687131.UC -Number: 25x air filters available -Price: per piece -Packaging dimensions: 80/80/H75 mm -Weight: 0.1 kg/piece

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC, Air Filter Air Breather Filter -Type: 40 5 -Number: 4x air filters available -Price: per piece -Dimensions: Ø 77 x 65 mm -Weight: 0.2 kg/piece

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Cloos, mains interference filter -Type: NEF FS5825 -Dimensions: 265/75/H50 mm -Weight: 0.7 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter -Manufacturer: Okaya, Noise Filter -Type: 3SUP-HL200-ER-6 -Voltage: 3x 500V 200A 50/60Hz -Dimensions: 480/200/H200 mm -Weight: 20 kg

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter, ferrite adapter, ferrite filter -Manufacturer: Reis Robotics, Ferrite Adapter Filter, Ferrite Filter -Type: unfortunately without a type designation -Number: 3 filters available -Price: per piece -Dimensions: 150/140/H80 mm -Weight: 0.7 kg/pc.

Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel., Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979, Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108 m² KG; 180 - 253 m² Sheet with beer filtration, Operating pressure: 8 bar , Power: 6 kW, Voltage: 220/380 V, Frequency: 50 Hz, Length: 10100 mm, Width: 1320 mm, Height: 1750 mm, Formats: square filter elements, Operation / Control: built-in control panel, Material: Stainless steel, Position: Horizontal, Base construction: Frame, Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump, Layer patterns: vertical row arrangement

Extrusion tool accessories, extruders, spinning plate filters, filter belts -Spinning plate filter: Filter belt for spinning plate extruder/melt filter, bag of 5 pieces -Size: 1736 × 22 mm -Fineness/count of meshes: 60–250–100 mesh -Number: 20 bags available -Price: per bag -Transport dimensions: 250/60/H20 mm -Weight: 0.3 kg/bag

Unused Filter element for a Tetra Top Aseptic filling machine. Size: 457x457x90. Nominal airflow: 338 m3/h. Pressure drop: 87 Pa. Efficiency at MPPS: 99,995%. Filter class: H14 EN 1822. Art-No: 1014313. Part number of Tetra Pak: 90600-3038., Type of Machine: Spare parts aseptic filling machines, Part number Tetra Pak: 90600-3038, Size: 457x457x90, Nominal Airflow: 338 m3/h, Pressure drop: 87 Pa, Efficiency at MPPS: 99.995%, Filter class: H14 EN 1822

Belt filter press The machine consists of a completely closed, strong sheet steel housing with synthetic resin coating, the lower part of which is designed as a filtrate collection basin.

Material: 1.4571/ stainless steel Content: 16 ltr Weight: 2000 kg Length x Width x Height: 2500 mm x 1300 mm x 2000 mm Filter area : 0,12 m² Fill : 16 ltr. Working pressure : 25 bar. Further information: Basic application area: - Suspensions with subtle and subtlest solid materials, which need for fast and optimal dehumidification a high adrift pressure difference.. - Dry sludge, those won coal is compressible and throught strong mechanical pressure arrives a drastic reduction of pore volume - Products, at those a widely dehumidification is possible after cake constitution through a displacement of pore fluid through gas - Suspensions, whose need for unproblematic abscission a degressive or a progressive supply of dehumidification potential. Very good condition. You can also get the entire system with all components you need. Write us below!

Laboratory press with 11 vertically arranged casting plates (each 260 mm x 250 mm), with hydraulic pump and motor 0.5 kW, oil reservoir, drain tray and drain valve. Tower can be moved forward; Cloths should be renewed.

used frame filter press / filter press REWA 1200x1200 chamber number: 50 pieces the arrangement is in an as good as new state.

used filter press Hoesch - cast iron small filter press from cast iron to the filter of liquids solutions, dirty waters, oil, biooil, rapeseed oil-used - with handwheel - downpour filter records 30x30 cm - with collective tub - tilled manual pump - dimension ca 1,00x0,5x0,7 m - weight approx. 300 kg with hand pump the arrangement stands to the rent and for the purchase at the possession.

used, kpl. 1 year warranty, plate size 470 x 470 mm, 11 plates, closed outlet, 45 mm cake thickness, pressure 8/10 bar, capacity approx. 75 liters, filter area 4m2, dimensions 2000 x 700 x 1100 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 13 plates + 12 frames, closed outlet, 30 mm cake thickness, pressure max. 6 bar, capacity approx. 35 liters, filter area 4m2, dimensions 1500 x 800 x 1000 mm, weight 700 kg, hand hydraulics, drip plate, filtrate gutter, with or without Filter cloths, also available as a longer frame with more plates and frames

Used filter press made by Seitz, type 40/30. PP plates with dimensions 40x40. 2 pieces available.

Used pressure filter made by Sfoggiatech, model SEB 1/P3. Filtration area 1 m3. Engine power 1,7 kW.

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates + 40 frame, closed outlet, 40 mm cake thickness, pressure max. 6 bar, capacity approx. 500 liters, filter area 27m2, dimensions 4800 x 1200 x 1600 mm, weight 2.5 tons, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

Hydraulic cylinder filter press Chamber filter press New, used and refurbished Ask us.

used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 70 plates, closed outlet, 30 mm cake thickness, pressure 10/15 bar, capacity approx. 2100 liters, filter area 162m2, dimensions 7500 x 1600 x 2300 mm, weight 18,000 kg, motor hydraulics, automatic. Plate transport, with or without filter cloths

Used pressure leave filter of diatomaceous earth, type Ecofilter, made by TMCI Padovan, capacity 10 m3, model TV3884.85. Tank volume 900 L, pressure 8 Bar. Temperature -10 +50°C. New 1985.

Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm

Used stainless steel filter press made by Seitz, type 40/30, new 1983. Filtration area 2,88 m2. 18 plates 40/40 cm. Hand clamp. New 1983. Available 2 pcs.