126,702 used machines on RESALE, but how to find them? Machine Search
TGW belt conveyor belt transfer GF 3520-490-360 RA2034 Technical data: Conveying length (NL): 3520 mm Framework width (NB): 490 mm belt width (GuB): 360 mm height (BH): 115 mm, 330 with Motor support feet: optionally available Conveying speed (v m/s): no Motor at the moment, contact us with your needed conveying speed Drive: SEW gear motor Electrical data: 50Hz V380-500, kW dipends on the Speed Year of construction: 2012 Optionally available: Frequency converter Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2012 condition: good (used) Conveying length in mm: 3520 Nominal / outside width in mm: 490 Belt width in mm: 360 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Conveyor speed m / s: bitte Kontaktieren scope of delivery: mit Motor, without supports and ...
Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...
\"Length: 6700 mm Width: 250 mm Height: 850 mm\" Auction-ID: A7-45983-63
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
Transnorm conveyor belt GF 4600-700-600 RA2243 Technical data: Conveyor length (NL): 4600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spee ...
Transnorm conveyor belt GF 25050-700-600 RA2152 Technical data: Conveyor length (NL): 25050 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 25050 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Conveyor speed m / s: bitte Kontaktieren scope of de ...
Transnorm conveyor belt GF 4700-700-600 RA2208 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s ...
Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Features: Construction year: 1999 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,7 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hör ...
A conveyor belt from the company Schöne from Berlin is offered. Technical data: Manufacturer: Schöne Transportbänder GmbH Model: Conveyor belt CNW-5E white FDA Dimensions: 2,100 x 878mm wide, endless, spiral connection V55MO + edge verse The belt is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer
A conveyor belt from the company Schöne from Berlin is offered. Technical data: Manufacturer: Schöne Transportbänder GmbH Model: Conveyor belt BW/ PA 120 FW PU 0:01 Dimensions: 1,880mm x 600mm wide, endless The belt is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer
Stockpile conveyor 21 m Belt width 650 mm troughed Manufacturer: Polxmair Frame made of square tubing Drive 2.2 KW Can be dismantled, everything is screwed Camp Saxony-Anhalt Price ex farm
Transnorm conveyor belt GF 26000-1100-1000 RA2289 Technical data: Conveyor length (NL): 26000 mm frame width (NB): 1100 mm, 1200 mm with motor belt width (GuB): 1000 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, R63DT100LS4TH Electrical data: 50Hz V380-500, kW 2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 26000 Nominal / outside width in mm: 1100 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / ...
Transnorm conveyor belt GF 13900-900-800 RA2211 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): please contact Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 scop ...
Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...
Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies ...
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Web spacing 30 mm, web height 5 mm Conveyor belt made of white plastic, as good as new Adjustable inclination 1 speed Dust compartment Mobile Drive 400V/50Hz
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Web spacing 30 mm, web height 5 mm Conveyor belt made of white plastic, as good as new Adjustable inclination 1 speed Dust compartment Mobile Drive 400V/50Hz
Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Nord KW: 0,25/S1 Ampere: 0,9 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides ...
length in total:3000 mm weight of the machine ca.:600 kg dimensions of the machine ca.:5150 x 900 x 1250 mm
weight of the machine ca.:340 kg dimensions of the machine ca.:2470 x 700 x 1300 mm
Consisting of Table 2x Vibration metering, type VD4 2x spiral conveyor type BF 40- L 12
Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...
Consisting of: Table 1 x Vibratory metering, type VD4 1 x spiral conveyor type BF 40-L12
Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...
Schulz roller curve conveyor right with straight section and pusher 90°-450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Center radius: 1,000 mm Straight section: Conveyor length (FL): 650 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Conveying gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: Round belt curve + straight section 2. electric drive for chain scraper Shipping dimensions: LxWxH: 2100x700x800 mm Scope of delivery: incl. side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running di ...
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...
Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...
Schulz roller curve 90° roller curve conveyor 450-390 IR1220 RA1185 Make: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveyor speed: v = 0.35 m/s incl. lateral guides on both sides Roll type: G6/50 plain bearing with conical plastic moulding Transport dimensions: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Features: Running direction: links/ rechts Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 1220 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Conveyor speed m / s: 0,35 scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie ...
Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal ...
DMO motorized roller conveyor for panel extraction aid from a single-sided edgebanding machine (or other tracked machine). Machine according to CE standards
Conveyor width 800 mm Overall width 930 mm Width with control unit 1070 mm Working height adjustable from 720 mm to 950 mm Use: Conveying empty bags for filling, labeling or printing Marking or labeling of paper or plastic material Operating hours unknown
Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...
Inv. Num. : 7720 Type: CL B Producer: NERKON Created: 2020 Parameters: The machine is in good condition.
Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...
Transnorm conveyor belt GF 21100-700-600 RA2204 Technical data: Conveyor length (NL): 21100 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 21100 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s: 0,42 scope of delivery: ...
Transnorm curved belt conveyor left bend 45°-800-700 IR900 RA2145 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjustab ...
maximum number of results exceeded
please refine your search
350 € 
