We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,591 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Charvet S.A. kitchen counter with 4-pits stove, 2 grill plates, and oven, type: A, number: 04-0011/A, dimensions: 2120 mm x 900 mm x 1330 mm.
used
Description Water thermoregulator Max temperature: 90°C Heating power: 12 Kw Pump power: 1.72 Kw Pump flow rate: 70 L/min Tank Capacity: No tank
used
Description Water thermoregulator Max temperature: 90°C Heating power: 12 kW Pump power: 1.72 kW Pump flow rate: 70 L/min Tank Capacity: No tank
used
Description Direct operation water thermoregulator Max temperature:90°C Heating power: 12 kW Pump power: 1.7 kW Pump flow rate: 70L/min Tank Capacity: no tank
used
pressure:20 t Stroke:230 mm table surface area:Ø600 mm distance table - lower edge of ram:770 mm weight:595 kg
used
used
used
including refrigerant system and cabinet with accessories
used
used
equipped with KNOLL fitter installation, type: KF 150/500 ( 2014)
used
equipped with tool change magazine; including 1 KNOLL filter installation, including 1 Alexander Bürkle 6-axis handling robot unit (1000x1200x2050mm) type: KF 150/500 and chip discharge conveyor
used
equipped with 24 stations tool exchange magazine; including 1 Alexander Bürkle 6-axis handling robot unit (1000x1200x2050mm); 1 KNOLL filter installation, type KF 150/500 and chip discharge conveyor
used
machine for marking and cutting rolled metal - corner TBL 2020 Production China. There are all documents. The machine was not in use, but stood for 2.5 years without observing the storage conditions, so the computer (system unit) does not work. Everything else is normal. We are ready to present the machine for inspection at any time. The machine is currently stored in a warehouse in the Republic of Tatarstan.
used
Table diameter: 1100mm, number of drilling units: 3, power: 1.5kW.
used
Compressed air supply: 6bar, connected load: 53kVA, weight: 9.5t, operational hours counter: 47,253h.
used
Controls: SIEMENS SINUMERIK 810M, weight: 2.5t, with documentation, tool magazine and accessories.
used
X-travel: 550mm, y-travel: 300mm, z-travel: 280mm, max. load: 500kg, table dimensions: 950x370mm, spindle diameter: 50mm, connected load: 22kVA, controls: SIEMENS Sinumerik 810M, weight: 2.6t.
used
X-travel: 4100mm, y-travel: 650mm, z-travel: 500mm, clamping table dimensions: 4600x710mm, table height: 840mm, controls: SIEMENS SINUMERIK, length: 7200mm, width: 3800mm, height: 3000mm, weight: 10.5t, with chip conveyor and documentation.
used
X-travel: 1600mm, y-travel: 520mm, z-travel: 425mm, table dimensions: 2300x570mm, table height: 900mm, connected load: 36kVA, length: 4100mm, width: 3300mm, height: 2900mm, weight: 7t, operational hours counter: 62,437h, with documentation, was maintained regularly.
used
Length: 4100mm, width: 3300mm, height: 2900mm, weight: 7.2t, the spindle is defective.
used
X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible.
used
X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.
used
X-travel: 250mm, y-travel: 160mm, table dimensions: 420x250mm, max. workpiece height: 160mm, max. workpiece weight: 120kg, length: 1545mm, width: 1240mm, height: 1065mm, weight: 540kg, with documentation, the machine should be overhauled, an inspection is possible.
used
Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.
used
X-travel: 800mm, y-travel: 600mm, z-travel: 400mm, U-travel: 60mm, V-travel: 60mm, workpiece dimensions: 1300x910x400mm, max. workpiece weight: 2.3t, dielectric capacity: 210l, connected load: 10kVA, length: 2550mm, width: 2350mm, height: 2200mm, weight: 4.84t, with generator, wire guide, protective cabin, documentation and other accessories, on-site inspection is possible.
used
Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.
used
Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.
used
Output: 300l/h, output: 300l/h, suitable for the treatment and reuse of rinse water, wash water, paint rinse water, cleaning solutions, waste water from crack testing and other liquid production residues.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 70300 € : 1406 € : 620 mm : 1.000 x 400 mm : 1.015 x 405 x 610 mm : 1015 mm : 400 x 1.000 mm : 1050 mm : 1100 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 420 mm : 0.001 : 3.7 kW : 1.5 kW : 1 kW : 1 kW : 6,3 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor ...
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 57670 € : 1153.4 € : 610 mm : 800 x 400 mm : 800 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 450 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 480 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1,1 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment accor ...
used
Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)
used
Tom Chandley Compacta deck oven Serial: 20C18AA02 2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph
used
STANDARD-EQUIPPED
used
Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph
used
Machine Details Stock number 1105-03839 Machine type machining center - vertical Brand CHIRON Type FZ 15 W Year of construction 2004 Control type CNC SIEM 840D controller Storage location FRANCE Country of origin france Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 550 mm y-travel 400 mm z-travel 425 mm SIEM 840D controller Table clamping surface 2x 660 x 400 mm Tool holder ISO SK 40 Spindle speeds - infinitely variable 20 - 12,000 rpm Feed infinitely variable 0 - 60,000 mm/min Rapid traverse 60 m/min Feed force X/Y-axis 5,000 N Feed force Z-axis 10,000 N Tool magazine: 20 Tool diameter max. 65 mm Tool diameter with 2 free spaces 150 mm Tool length - max. 220 mm Spindle diameter in the front. Bearing 70 mm Torque at the spindle max. 180 Nm Distance spindle/table 280 - 705 mm Spindle/stand distance 480 mm Milling capacit ...
used
Screening machine Nordberg Chauvin 14/45-3 Screen area : 4500 x 1400 mm - 3 deckers Incl. Electric motor and springs
Yeong Chin X: 1500 - Y: 600 - Z: 800 mm CNC Longitudinal travel X-axe: 1500 mm Cross travel Y-axe: 600 mm Travel Z-axe: 800 mm Admission in boring head (ISO): ISO-50 Control: Fanuc Weight: 3 ton
used
Stock# U824V-1 Used butterfly type valve by ChemValve (CH) with DIN 300, PN10. Carbon steel design. Contact parts layered with teflon. Valve is operated pneumatically. Valve type PTSGWA1-WD1.
used
2006 Hemingstone glue patch bag machine model hm 800 gpc bag size width 200-650mm length 200-750mm bottom gusseting 30-65 mm production speed cycles min 100-150 film width patch film 140mm
used
x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
AGIE CHARMILLES wire cut AC2 VERTEX year `2010
used
CNC control Sinumerik 810 M Travel x/y/z 400 mm / 400 mm / 630 mm Tool holder SK 40 Max. spindle speed 10,500 rpm Fourth / fifth axle with Peiseler NC – table AWU 160 with counter holder Machine weight 6 t Accessories: Chip conveyor, six SK 40 ER 32 tool holders incl. clamping bolts, without cutting tools
used
ASPARAGUS PEELER, CHRISTIAENS AGRO SYSTEMS, TYPE: 1350-6 Technical description: Machine number: 062 906 Heads number: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1650 x 2000 x 1600 mm
used
travel -x axis: 800 mm travel -y axis: 500 mm workpiece sizes: 1.300 x 1000 U/min ampere: 60 A workpiece weight: 3.000 kg Control: CNC VISION 5 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 â 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...
used
Chiron FZ15KS HIGH SPEED, 4 axis vertical machining center, X: 550mm, Y: 400mm, Z: 360mm, 4th axis original Peiseler 360.000 pos, CNC Siemens 840D, Table 1050 x 450mm, Toolchanger 48 pockets, ISO 40, Spindle 12000 1/min, Renishaw tool control, Coolant through spindle, Hydraulic clamping, Swarf conveyor, Under power in our warehouse in Gussago BS, Mimu machine tools, Spindle: 12000 RPM, 4th axis: 360 000 pos
used
MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 â 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...
used
Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing several mechanical operations with a single set-up on multiple surfaces of the same piece of work. It is generally equipped with several motion axes and one automatic tool exchange system and sometimes multiple pallets, CNC type: Fanuc 21iM, Number of pallets: 2, Spindle revolutions: 15000
used
Manufacturer | Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz Type | Type: CMB 16 Pinole Lift | Quill stroke: 120 mm Speed (infinitely variable) | speed (stepless): 460 - 1840 rpm ; 140 - 560 rpm Dimensions table | Table dimensions: 280 x 360 mm Adjustment range table | Adjustment travel table: 540 mm Recording | Holder: MK 2 Connected load | Connection Value: 0.8 kW Total weight | Total Weight: 350 kg