ch mansfeld used for sale

Chmer CW 643S EDM Wire Cutting Machine Table : 600 mm x 400 mm Z : 300 mm There is small issues needs to be fixed like water leakage

32” machine in single jersey slit Two cylinders E28 and E32, 102 systems Laycra feeders Feeding meminger to the thread Functional, only 15 tons of knitwear made

Vertical machining center make CHIRON type FZ 12 S high speedFabr. -No: 114-30 built in 2000X-way: 550 mmY-way: 300 mmZ-way: 425 mmTable size: 950 x 350 mmMax. Table load: 500 kgRapid traverse speed: 40000 mm / minTool change device: 12 Pos.Spindle mount: ISO 30Spindle speeds: 20 - 10500 rpmSpindle drive motor: 5.5 kWTotal power requirement: 15 kVAWeight approx: 3590 kgDimensions approx: 2000 x 3000 x 2500 mmWith- Coolant device- Chip conveyor- Control Siemens Sinumerikused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

New CHARRIAU MPV-2000 refrigerated tank (2022). Never had liquid. Adjustable agitation (operating time and interval), adjustable temperature. More information on request.

pressure: 160 t distance between columns: 2700 mm stroke: 280 mm ram adjustment: 120 mm daylight (stroke down, ram adjustment above): 550 mm table surface area: 2700 x 1200 mm ram surface: 2700 x 1200 mm no. of strokes: 20 - 40 Hub/min total power requirement: 22 kW weight of the machine ca.: 33 t dimensions of the machine ca.: B 3520 x T 2850 x H 4550 m Double-column eccentric press in a special design - size of the GTX 250 S, but only a pressing force of 160 t Furnishing: - hydraulic roller bars - hydraulic Tool clamping above + below - Motorized ram adjustment - infinitely variable speed control - hydraulic overload - Grease central lubrication - Hand oiler for ram weight compensation converted by MAWI GmbH Germany: - Swivel arm with Siemens Touch control panel - Light barrier from Sick - Safety control from Pilz + Siemens - frequency converter - Monitored protection area at the rear  ...

Mobile heat tunnel for shrinking of film bundles with film overhang

Reconditioned Christy Turner Pulverizer complete with new full set of ADI liners and hammers installed, the machine has been well maintained and runs like new. Comes with a lot of spare parts including hammers, shafts, spacers, some ADI liners and a completely reconditioned spare main drum complete with mounted bearings.

Stock number: 3666 TWIST DRILL GRINDING MACHINE Manufacturer: Christen , Type: 2-32 Specifications: Grinding range 2-32 mm Ø Grinding angle Min/Max 60 -180 grader Cooling water system. Weight: 500 kg

CHRISTEN Drill Grinding Machine - with coolant device - approx. 8 grinding wheels Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Machine Details Warehouse number 1105-03698 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 15 K S 5 AXIS Year of construction 2001 Control type CNC Control HEIDENHAIN TMC 530 Storage location FRANCE Country of origin france Delivery time ready for shipment Freight base EX WORK Price Technical details x-travel 550 mm y-travel 400 mm z-travel 425 mm Control HEIDENHAIN TMC 530 Table clamping surface 600 X 350 mm Tool holder ISO SK 40 Spindle speeds - infinitely variable 20 - 12,000 rpm Feed infinitely variable 0 - 60,000 mm/min Rapid traverse 60 m/min Feed force X/Y axis 5,000 N Feed force Z-axis 10,000 N Tool magazine: 20 Tool diameter max. 65 mm Tool diameter with 2 free spaces 150 mm Tool length - max. 220 mm Spindle diameter in the vord. Bearing 70 mm Torque at the spindle max. 180 Nm Distance spindle/table 280 - 705 mm Distance spindle/ ...

Machine Details Warehouse number 1105-03697 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 08 S Year of construction 1998 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately - pre-sale Freight base from stock HAGUENAU FRANCE Technical details x-travel 300 mm y-travel 250 mm z-travel 250 mm Total power requirement 8 kW Machine weight approx. 1.8 t Information very well maintained 3 axles BZ CHIRON FZ 08 with FANUC 18 I M - speeds up to 10000 rpm - rapid traverses up to 60 m ! HSK 30

Machine Details Warehouse number 1105-03697 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 08 S Year of construction 1998 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately - pre-sale Freight base from stock HAGUENAU FRANCE Technical details x-travel 300 mm y-travel 250 mm z-travel 250 mm Total power requirement 8 kW Machine weight approx. 1.8 t Information very well maintained 5 axis BZ CHIRON FZ 08 with FANUC 21 M - speeds up to 10000 rpm - rapid traverses up to 60 m ! HSK 30 integrated with 4/5 axe peiseler SPAENEWANNE

working area: 3800x5000 mm dimensions: 3000x1200x1100 mm weight: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used flat grinder Brand: Churchill GM Magnetic table measures: 1200x330mm Routes: 1200x300x300mm

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

EDM Maximum piece size (Length, width, height) 800mmX46mmX35mm Heavyweight maximum length of the electrode 350mm External machine dimensions Length 2180mm Width 1870mm Height 2329

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

Screening machine Allis Chalmers Type 12/40-2 4000 x 1200 mm – 2 decks

Complete with table dresser, 2 Fixed Steadies and 1 other spindle and coolant tank   Dimensions 558.8 x 127 x 152.4 mm, 22’ x 5’ x 6’ weight 7.5 tons   Machine is in Very good condition

Screening machine Chauvin 13/30-2 Brand: Chauvin Type: Grizzly Screen area: 3000 x 1300 mm - 2 deckers Drive: Electric motor 22 kW

Chauvin screening machine 21/50-1 Screen area: 5000 x 2100 mm - 1 decker Screen opening: 55 x 70mm Drive: Electric motor 11 kW Incl.: Springs with spring console & steel base.

Control unit Heidenhain iTNC 530 X-Axis travel 800 mm Y-Axis travel 600 mm Z-Axis travel 500 mm X-Y-Z axes speed 20 - 20 - 40 m/min Table length 610 mm Table width 610 mm Table load 120 kg Spindle speed 24000 rpm Spindle taper HSK A 63 - HSK E 50 Motor power 25/21 kW Tool changer 120 positions Dimensions L 6500 x W 5500 x H 3000 mm Weight 8300 kg

Christiaens asparagus sorter for asparagus will be available for sale in June 2024

Total capacity (gross): 904 hl, Material: stainless steel, Features: 3 fermenting tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl) , own temperature control (Nerb) , Code: 43

Additional title: with own temperature control, Total capacity: 2570 hl, Features: 4 storage tanks (approx. 440 hl), 2 pressure tanks (approx. 320 hl), 1 wheat beer tank (approx. 150 hl), own temperature control , Code: 43

Additional title: Yeast tank with temperature control, Volume: 76 hl, Operating pressure: 0 bar, Operating temperature: 20 °C, Width: approx. 1910 mm, Height: approx. 3420 mm, Material: stainless steel, Position: vertical, Base construction: conical, Features: cooling zones (glycol, 0.9 bar, cone: 14 l, jacket: 34 l), manhole cover, outlet DN65, manometer, safety valve, vacuum valve, load cell, spray tube DN25, CIP pipe, ladder bar, lifting lugs, own temperature control , Code: 43

Volume: 11 hl, Operating temperature: 50 °C, Width: approx. 1 m, Height: approx, 2,75 m, Material: stainless steel, Position: vertical, Base construction: insulated, Features: cartridge radiator, level indicator (hose), sampling tap, manhole (cover), overflow, 2 outlets with manual valve flaps , Code: 5278

Control Siemens Sinumerik Travel X/Y/Z 525/300/405 mm Tool magazine for 20 Wkz., SK 40 Spindle speed 8000 min-1 Changing table IKZ Filter system Probes

Defected Power cable for down head

Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer:  ...

This CHETO 3000 Drilling machine was made in 2014 and has 9700 production hours. The machine has a spindle speed of 6000 rpm.

Turret milling machine LIH CHANG 942-S - capacity 760x300x400 mm, Digital read-out system, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1067x230 mm, Longitudinal travel x axis: 760 mm, Cross travel y axis: 305 mm, Vertical travel z axis: 410 mm, Spindle taper: 30 ISO, Spindle speed: 80 - 2720 rpm, Number of spindle speeds: 8, Spindle motor power: 1,5 Kw, Quill spindle travel: 127mm, Number of working feeds: stepless by DC motor, Weight: 1.500 Kg, Accessories: Digital Read Out

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2001. It is equipped with a Siemens SINUMERIK 840D control unit and has 3 axis. There are 2 units available.

This CHIRON MILL 2000 Vertical Machining centre was manufactured in the year 2005 in Germany. Contact us anytime for further questions.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This CHIRON MILL FA 800 vertical machining center was built in the year 2006 in Germany. it is equipped with a Siemens Sinumerik 840D control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This CHIRON MILL 800 Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a SIEMENS SINUMERIK control unit and has 5 axis.

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Siemens SINUMERIK 840D control unit and has 4 axis.

This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.

This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.

This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.

This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.

This Charmilles HD30CNC Erosion machine was manufactured in the year 2006.

This Challenger FY-3200AT Plus-H4 3D Printer was manufactured in the year 2021 in China. The machine has a range of 3000 mm.

Heraeus V?tsch Climatic chamber VTRK 500. Inner dimensions 745 x 880 x 765mm. Capacity 500L. Door with porthole 350 x 350 / wipers Temperature 10-90?C. Fridge unit in the lower part, under the enclosure Space for storage tank approx. 10l of distilled water. Electrical power 3.1 kW / mono 220 V Overall dimensions: 1100 X 1400 X 2100

CNC machining center MIKRON VCP 1000 Duro Heidenhain iTNC 530 control Year of production: 2005r. Min XYZ: 1000 / 650 / 500 mm. Fourth axis. Number of slots in the tool magazine 24 SK40 mounting Machine in continuous operation.

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

Capacity: 180 x 100 mm. Spindles: 4 Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kW Motorised thickness adjustment 4 cutterblocks Chaindrive Infeed table 1m70. long