cfs tiromat used for sale

Height=1.15 m, Overall length= 0.85 m, Overall width= 0.7 m, Net weight= 83 kg,

Height=1.97 m, Overall length= 1.1 m, Overall width= 7.3 m, Net weight= 2600 kg,

Height 2700 mm Width 2400 mm Length 3200 mm Capacity 2000 l Electrical Supply: 400V 50Hz 3N Total power 75 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 250 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant Description The wolf-mixer has an infrared MultiTrack analyzer. It analyzes the fat, protein and water content of meat. Approximate accuracy: approx. 2%.

pressure: 150 t throat: 400 mm stroke: 400 mm dayligth: 600 mm table surface area: 1000 x 600 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: mm ram surface: 1000 x 600 mm working feed: 5 - 15 mm/sec speed down: 130 mm/sek speed up: 180 mm/sek power requirement: 18 kW weight of the machine ca.: 12,0 t dimensions: 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solu ...

Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm

pressure: 100 t throat: 250 mm stroke: 400 mm dayligth: 500 mm table surface area: 800 x 500 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: 500 mm ram surface: 800 x 500 mm working feed: 10 mm/sec speed down: 110 mm/sek speed up: 160 mm/sek power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions: 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solut ...

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 150 x 65 mm -Photo: 600 mm (see sketch in the photos) -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, cutting knife, knife set, bacon cutter, gate, cutting gate -Manufacturer:CFS Convenience Food Systems,Cutting knife set for cut knife 300/400 -Type: Art.No.: 39441 1 set = 4 pieces -Quantity: 6 sets available -Price: Per set -Dimensions Bos: 135/70/H55 mm -Weight: 1.2 kg

CIP cleaning, extra long infeed conveyor of 2000 mm, Belt width: 1000 mm, Frying length: 9000 mm, Heating: Thermal oil, 360 kW, Steam: 4 - 8 Bar, Compressed air: 2 - 4 Bar, Power: 3 x 400V, 50Hz, 30kW, Dimensions: 12600 x 2100 x 3400 mm, Weight: 10000 kg

CFS CUTMASTER 325V & 500V

Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, electric hoists, prepared for CO2 fire extinguisher, Belt width: 650 mm, Frying length: 3000 mm, Heating: electric, 90kW, Frying time: 25 - 250 sec, Power: 3 x 400V, 50Hz, 99kW, Dimensions: 6100 x 2350 x 3000 mm, Weight: 2750 kg

Teflon infeed, separate infeed conveyor, hold down belt, circulation pump, oil level control, sediment removal, electrical hoists, prepared for CO2 fire extinguisher, Belt with: 600 mm, Frying length: 6000 mm, Heating: thermal oil, 388 kW, Frying time: 25 - 250 sec, Compressed air: 4 - 6 Bar, Power: 3 x 415V, 50Hz, 8kW, Dimensions: 8700 x 2300 x 3900 mm, Weight: 4250 kg

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 2.5kW, Dimensions: 3000 x 1700 x 2100 mm, Weight: 1025 kg

Including continuous belt washer, Belt width: 600 mm, Tiers: 2 x 4 pc., Belt length: 60 m, Product gap: 130 mm, Retention time: 2.9 - 29 min, Steam: NW40, 4 - 8 Bar, Exhaust: 2 x 2000 m³/h, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 27kW, Dimensions: 9200 x 3900 x 4700 mm, Weight: 13500 kg

Hold down belt, sediment removal, circulation pump, manual hoists, Belt width: 600 mm, Frying length: 3000 mm, Heating: electric, 80kW, Power: 3 x 400V, 50Hz, 90kW, Dimensions: 5400 x 1750 x 2800 mm

Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, prepared for CO2 fire extinguisher, Belt width: 600 mm, Frying length: 6000 mm, Heating: thermal oil, 388 kW, Oil volume: +/- 1250 litre, Frying time: 25 - 250 sec, Power: 3 x 415V, 50Hz, 8kW, Dimensions: 8950 x 2050 x 3900 mm, Weight: 4250 kg

Fully overhauled, including new controls., Belt width: 600 mm, Belt speed: 1.5 - 15 m/min, Filling level: minimal 15 litres, Power: 3 x 380V, 50Hz, 0.61kW, Dimensions: 1400 x 900 x 1750 mm, Weight: 145 kg

With belt washer and CIP system, Belt width: 400 mm, Tiers: 2 x 4 pc., Belt length: 44 m, Product gap: 130 mm, Retention time: 2.5 - 75 min, Temperature: max 200°C, Heating: thermal oil, 300kW, Exhaust: 2 x 2000 m³/h, Steam: NW40, 4 - 8 Bar, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 35kW, Dimensions: 8250 x 3150 x 4250 mm, Weight: 12000 kg

Belt width: 400 mm, Power: 3 x 400V, 50Hz, 0.6kW, Dimensions: 1400 x 700 x 1650 mm, Weight: 166kg

With extra infeed conveyor of 1800 mm, Including CIP tank and Bartec hygrophil, Switch cabinet separate, not connected to the machine, With optional outfeed conveyor of 1500 mm, Belt width: 600 mm, Cooking length: 7000 mm, Heating: thermal oil, 180kW, Steam: 4 - 8 Bar, Cooking time: 2 - 40 min, Compressed air: 6 - 10 Bar, Power: 3 x 415V, 50Hz, 13kW, Dimensions: 9800 x 2000 x 3150 mm, Weight: 5850 kg

Belt width: 400 mm, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 2500 x 900 x 1750 mm, Weight: 345 kg

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 °C Drive power:  ...

With adjustable take-over outfeed conveyor, Belt width: 400 mm, Filling capacity: 27 litres, Power: 3 x 400V, 50Hz, 0.7kW, Dimensions: 2860 x 750 x 1450 mm, Weight: 390 kg

Including:, CFS batter filter, Serial number: 94, Year of construction: 2002, Power: 3 x 400V, 50Hz, 0.12kW, Weight: 50 kg, Belt width: 600 mm, Dimensions: 1950 x 1200 x 1750 mm

With extra infeed conveyor, Belt width: 400 mm, Power: 3 x 400V, 50Hz, 0.7kW, Dimensions: 3000 x 850 x 1100 mm, Weight: 250 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 120 x 45 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1360/600/H125 mm -Weight: 146 kg

Belt width: 600 mm, Grillength: 13000 mm, Retaining time: 2.5 - 50 min., Heating: thermal oil, 300kW, Steam: 4 - 8 Bar, Power: 3 x 400V, 50Hz, 18kW, Dimensions: 15000 x 2200 x 3100 mm, Weight: 10000 kg

Hold down belt, circulation pump, sediment removal, oil level control, manual hoists, prepared for CO² fire extinguisher, Belt width: 400 mm, Frying length: 3000 mm, Heating: electric, 66 kW, Power: 3 x 400V, 50 Hz, 72kW, Dimensions: 5400 x 1650 x 3150 mm, Weight: 2450 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59800 € : 1130.22 € : 100 to : 400 mm : 800 x 500 mm : 500 mm : 110 mm/s : 10 mm/s : 160 mm/s : 11 kW : 1900 mm : 1700 mm : 2930 mm : 5500 kg : 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created wi ...

Teflon infeed, hold down belt, circulation pump, oil level control, sediment removal, electric hoists, prepared for CO2 fire extinguisher, Including separate infeed belt, Machine delivered with CFS VTC1100-194 oiltank and oilpump, Belt width: 500 mm, Frying length: 3000 mm, Heating: electric, Power: 3 x 380V, 50Hz, 72kW, Weight: 2500 kg, Dimensions: 6300 x 1700 x 3100 mm

: neu : Türkei : 70700 € : 1336.23 € : 100 to : 600 mm : 900 x 500 mm : 800 mm : 400 mm : 220 mm/s : 1 - 20 mm/s : 250 mm/s : 14,65 kW : 1900 mm : 1700 mm : 4400 mm : 6000 kg : 30 - 239 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Cooler Siemens electrical components 8 additional signal inputs and outputs 10-inch touchscreen PLC Siemens S7 1200 Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or SickTwo-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CFS oil filter, Type: OMR120, Serial number: 60, Year of construction: 2005, Dimensions: 2750 x 1100 x 1700 mm, Power: 3 x 380V, 50Hz, 4.5kW, Weight: 525 kg, Including pallet filterpaper, NN ambient cooling conveyor, Belt width: 950 mm, Belt length: 6000 mm, Belt: eye link belt of 3 mm, Compressed air: 6 Bar, Power: 3 x 380V, 50Hz, 2.7kW, Dimensions: 7600 x 1700 x 2000 mm, Variable speed control, Wanson Thermopac thermic boiler, Type: 200B, Serial number: 9335.56445, Year of construction: 1986, Heating: natural gas, Heating power: 233 kW, Power: 3 x 380V, 50Hz, 7.5kW, Dimensions: 3000 x 2450 x 2600 mm, Installation built into 10ft container, Belt width: 600 mm, Belt: Eyelink belt for extra small products, Frying length: 6000 mm, Heating: Thermal oil, Power: 3 x 400V, 50Hz, 8.6kW, Dimensions: 8700 x 2200 x 3800 mm, Weight: 4250 kg

General SKU297Y563 MakeCondux TypeCFS 8 LocationBarneveld Main Features Motor2.2 KW Inlet diameter60 mm Specified Features - Jet Mill Rotor size85 mm Grinding room sizeø 200x350 mm Housing dimensions ø 200x350 mm InletDN60 Motor2,2 kW (220/380 V 2840 rpm) Jet Mills MaterialStainless steel 1.4571 (316Ti) General Floor space1,15x0,40 m Total height0,95 m Weight210 + 70 kg Extra information Extra SpecificationsOutput DN35,  with K-tron screw feeder, type K2, with digi driver, 2000 rpm, input Dia. 220 mm, with stirrer. Jet MillsConduxMills > Jet MillsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

With stick inserter SA4180-193 and outfeed conveyor of 1500 mm, Including additional outfeed conveyor of 900 mm and tool trolley., With BVP bridge breaker in the hopper., Belt width: 400 mm, Capacity: max 50 strokes/min, Hopper: 270 litres, Belt speed: 1.5 - 15 m/min, Water: 4 Bar, Compressed air: 6 Bar, 300 l/min, Power: 3 x 400V, 50Hz, 7.8kW, Dimensions: 3650 x 1000 x 2600 mm, Weight: 1186 kg

With Stick Inserter400-210, Including tool trolley and additional wire belt outfeed conveyor of 900mm, Belt width: 400 mm, Capacity: max 50 strokes/min, Hopper: 270 litres, Belt speed: 1.5 - 15 m/min, Water: 4 Bar, Compressed air: 6 Bar, 300 L/min, Power: 3 x 400V, 50Hz, 8kW, Dimensions: 3450 x 1000 x 2600 mm, Weight: 1200 kg

Mobile lifter for 200L and 300L tote bins., Tilting height adjustable., Model: A, Tilting height: 1750 - 2250 mm, Working load: max 350 kg, Power: 3 x 400V, 50Hz, 0.75kW, Dimensions: 1700 x 1450 x 3150 mm, Weight: 300 kg

The machine is in good technical condition; testing is possible by prior arrangement. WORK TABLE (MM) 900 x 700 mm UPPER PLATEN (MM) STROKE (MM) 550 x 400 mm 600 mm DAYLIGHT (MM) RAM CYLINDER DIAMETER 900 mm 135 mm / 1 pc AUXILIARY CYLINDER DIAMETER 3550 mm / 2 pcs RAM CYLINDER DOWNWARD SPEED (MM/S) 250 mm/s RAM CYLINDER RETURN SPEED (MM/S) 250 mm/s RAM CYLINDER WORKING SPEED (MM/S) 10 - 40 mm/s MOTOR PUMP 18.5 kW 45 cc OIL TANK (LITERS) OIL (LITERS) 345 l 67 l

Battering machine with underbath and four-layer batter curtain., Variable adjustable speed., Belt width: 600 mm, Belt speed: 2 - 20 m/min, Power: 3 x 400V, 50Hz, 0.62kW, Dimensions: 1350 x 950 x 1750 mm, Weight: 195 kg

Key data: 100 t

Manufacturer: Hidroliksan Model: CFSS 100t Year: 2022 Condition: Used Stock number: 9614 Operating hours: 800 h Compressive force: 100 t Table length: 800 mm Table width: 500 mm Stroke: 400 mm Machine height: 2930 mm Machine length: 1600 mm Machine width: 1700 mm Machine weight: 6000 kg

CFS traysealer, type: Star2-HS V2.0, serial number: 697-173, year of construction: 2004, 400 V, 3 Ph, 50 Hz, 17.2 kW, 24.8 A, air: 6 bar / 2000 nl-min, water: 2 bar / 54 liter/h, dye: (5x) 120 mm x 170 mm, wire belt width: 12 mm, total dimensions: 4800 mm x 1400 mm x 2350 mm. Including 4 pallets with extra dye sets, dimensions dye: (5x) 190 mm x 100 mm, dimensions dye: (2x) 260 mm x 310 mm, dimensions dye: (2x) 220 mm x 290 mm.

EcoBreader breading machine including bunker for bread crumbs., Type: PD200-87, Filling volume: 200 kg, Power: 3 x 380V, 50Hz, 0.55kW, Dimensions: 1450 x 1000 x 1650 mm, Weight: 120 kg, Belt width: 600 mm, Belt speed: 1.5 - 15 m/min, Power: 3 x 380V, 50Hz, 1.7kW, Dimensions: 2200 x 900 x 2050 mm, Weight: 300 kg

Wetcoater with variable adjustable speed, Belt width: 600 mm, Belt speed: 1.5 - 15 m/min, Power: 3 x 380V, 50Hz, 0.62kW, Dimensions: 1350 x 750 x 2050 mm, Weight: 185 kg