cfs gea used for sale

Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 390/210/H180 mm -Weight: 16.7 kg

geared motor, electric motor -Speed: 32.5 rpm -Power: 0.55 kW -Design: B5 angle -Hollow shaft diameter: Ø 25 mm -Protection class: IP 44 -Quantity: 1x motor available -Dimensions: 470/155/H240 mm -Weight: 19.1 kg

Gear Motor SEW SA42LP71 D63L4B03/HR/TF ( SA42LP71D63L4B03/HR/TF ) 0,0,0 25 kW 34 rpm i=37,94 220/ 380 V IP54 B35, with foot and flange shaft diameter: Ø 30 mm New !' Dimensions: 510 x 180 x 180 mm

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1010 mm gear width: 0 mm max. module: min. module: total power requirement: 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radiu ...

Gear motor, electric motor, electric gear motor -Speed: 25 rpm -Power: 1.1 kW -Construction: B3 angle -Diameter shaft: 32 mm -Protection class: -Number: 1x motors available -Dimensions: 600/410/H410 mm -Weight: 97 kg

Gear Motor with Brake ABM Type: ZFB 12SO / G80 F4D 808-4 ( ZFB12SO / G80F4D808-4 ) 0,0,0,0 75 kW 430 rpm 230 / 400 volts 5 -100 Hz IP 54 / 55 flange Ø 140 mm used, tested ! Dimensions: 470 x 150 x 200 mm

max. wheel diameter: 400 mm gear width: 280 mm max. module: 1 min. module: 4 total power requirement: 15 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 27 mm hexagon -Protection class: IP 44 -Dimensions: 510/200/H190 mm -Weight: 15.7 kg

Gear motor, electric motor, three-phase motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 45 -Dimensions: 460/215/H160 mm -Weight: 18 kg

Gear motor, electric motor -Speed: 211 rpm -Power: 0.25 kW -Construction: B5 -Diameter hollow shaft: Ø 22 mm -IP protection -Dimensions: 335/140/H190 mm -Weight: 9 kg

Gear motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 380/160/H190 mm -Weight: 14 kg

Geared Motor GETRIEBEBAU NORD Type: SK 01F-71 L/4 ( SK01F-71L/4 ) 0.37 kW 70 rpm 230 / 400 Volt IP 55 Flange Ø 210 mm used, tested ! Dimensions: 400 x 170 x 210 mm

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 6 total power requirement: 25 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor GROSCHOPP Type: WK 1441 - 1 ( WK1441-1 ) DM 80-40 0,0,0,0 022 kW 24 rpm 230 / 400 V shaft diameter: Ø 12 mm flange diameter: Ø 110 mm aluminium housing used, tested ! Dimensions: 230 x 170 x 130 mm

max. wheel diameter: 0 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 505/240/H200 mm -Weight: 30 kg

Gear motor, electric motor -Speed: 250 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 440/220/H160 mm -Weight: 14.45 kg

Gear motor variable SEW transmission: S42-VUO 17-81 rpm manually adjustable via V-belt motor: eDFT71D-4 0,0,0,0 37 KW 1370 rpm 220/ 380 V 3AC IP54 Shaft diameter: Ø 25 mm Motor base: 130 / 135 x 124 mm Hole spacing ( parallel to shaft ): 100 mm hole spacing ( transverse to shaft ): 80 mm hole diameter: Ø 10.5 mm New ! Dimensions: 430 x 220 x 360 mm

Gear motor, electric motor -Speed: 30 rpm -Power: 0.45 kW -Construction: hollow shaft angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 375/160/H275 mm -Weight: 12.5 kg

Gear motor, electric motor -Speed: 60 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 415/170/H120 mm -Weight: 37 kg

Geared motor with brake VEM ZG5 BMRZA 100 L 4 ( ZG5BMRZA100L4 ) 4,4,000 0 kW 50 rpm 220 / 380 V IP44 shaft diameter: Ø 75 mm Flange diameter: Ø 400 mm New ! Dimensions: 920 x 400 x 440 mm

workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...

Gear motor, electric motor, electric gear motor -Speed: 188 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 265/138/H117 mm -Weight: 4.3 kg

Gear motor, electric motor -Speed: 75 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 250/160/H120 mm -Weight: 4.75 kg

Geared motor with brake VEM ZG4 BMRE 100 L 6 ( ZG4BMRE100L6 ) 2,2,2 2 kW 25 rpm 220 / 380 V IP44 shaft diameter: Ø 60 mm Flange diameter: Ø 300 mm New !' Dimensions: 780 x 300 x 360 mm

max. wheel diameter: 330 mm gear width: 180 mm max. module: 7 min. module: 0,5 total power requirement: 12 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

Servo Motor with Gearbox and Brake, Permanent Magnet Motor ELAU SB105-30-08-05-19-S-01-64-BOKN 19192308-012 3000rpm IP64 Gearbox: PFEFFER & PARTNER RPLN 15-2 BK i 45:1 shaft: Ø 32 mm flange: 105 x 105 mm used, tested ! Dimensions: 660 x 140 x 110 mm -

max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 27 rpm -Power: 0.055 kW -Construction: B5 angle -Diameter shaft: Ø 14 mm -Protection class: IP 54/65 -Price: per piece -Number: 2x available -Dimensions: 280/150/H160 mm -Weight: 5.4 kg

Gear motor, electric motor -Speed: 45 rpm -Power: 0.055 kW -Construction: B5 angle -Diameter shaft: Ø 14 mm -Protection class: IP 54/65 -Dimensions: 280/150/H160 mm -Weight: 5.4 kg

Gear Motor LEROY SOMER CBA3 BS ( CBA3BS ) 0,0,0 16 kW 50 rpm i=29,30 ATAV F71 BSTA4, explosion-proof 220/ 380 V IP54 design: flange shaft diameter: Ø 20 mm Dimensions: 500 x 160 x 160 mm

workpiece diameter: 240 mm centre distance: 0 mm honing length max.: 500 mm max. module: 5 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -electric coupling -Dimensions: 395/190/H180 mm -Weight: 14 kg

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: 16 mm -Protection class: IP 44 -Brake: 220 V -Number: 8x motors available -Price: per piece -Weight: 15 kg

Gear motor variable / adjustable SEW S60- D22 B ( S60-D22B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 15 - 115 rpm manually adjustable 380 V IP55 shaft diameter: Ø 35 mm New ! Dimensions: 710 x 350 x 280 mm

max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...

Stepper gear motor with brake, universal rotary tables with cam drive SOPAP TSa 11000-8-360-200-D ( TSa11000-8-360-200-D ) 103.3 HZ 310 V IP54 used, tested ! Dimensions: 1500 x 1000 x 530 mm

Gear motor, electric motor, electric gear motor -Speed: 8/77 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 44 -Brake: 220 V -Price: per piece -Number: 1x available -Dimensions: 590/200/H270 mm -Weight: 36 kg

Stepper gear motor with brake, universal rotary tables with cam drive SOPAP TSa 700-2-330-7-D ( TSa700-2-330-7-D ) 360° rotatable in 180° steps 0.3 / 1.5 kW 380 - 500 V IP54 used, tested ! Dimensions: 1300 x 710 x 380 mm

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 505/210/H170 mm -Weight: 15 kg

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 420 rpm -Shaft: Ø 12 mm -Construction: B3 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 225/140/H120 mm -Weight: 5.5 kg

Gear motor, electric motor -Speed: 194 rpm -Power: 0.75 kW -Construction: B3 -Diameter hollow shaft: Ø 24 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 430/150/H200 mm -Weight: 15 kg

Geared motor with brake and freewheel shift FLENDER HIMMEL KF65-A90LI4- LSN ( KF65-A90LI4-LSN ) 1,1,000 5 kW 16 rpm 220-240 / 380-420 V IP54 shaft diameter: Ø 35 mm flange: 200 x 200 mm used, tested ! Dimensions: 770 x 400 x 250 mm

Gear motor, electric motor -Speed: 35 rpm -Power: 0.75 kW -Construction: B3/5 -Diameter shaft: Ø 40 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 660/235/H280 mm -Weight: 66 kg