cfs gea used for sale

Fully overhauled, including new controls., Belt width: 600 mm, Belt speed: 1.5 - 15 m/min, Filling level: minimal 15 litres, Power: 3 x 380V, 50Hz, 0.61kW, Dimensions: 1400 x 900 x 1750 mm, Weight: 145 kg

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 2.5kW, Dimensions: 3000 x 1700 x 2100 mm, Weight: 1025 kg

Hold down belt, sediment removal, circulation pump, manual hoists, Belt width: 600 mm, Frying length: 3000 mm, Heating: electric, 80kW, Power: 3 x 400V, 50Hz, 90kW, Dimensions: 5400 x 1750 x 2800 mm

Fully overhauled, including new controls., Belt width: 600 mm, Belt speed: 1.5 - 15 m/min, Filling level: minimal 15 litres, Power: 3 x 380V, 50Hz, 0.61kW, Dimensions: 1400 x 900 x 1750 mm, Weight: 145 kg

Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, electric hoists, prepared for CO2 fire extinguisher, Belt width: 650 mm, Frying length: 3000 mm, Heating: electric, 90kW, Frying time: 25 - 250 sec, Power: 3 x 400V, 50Hz, 99kW, Dimensions: 6100 x 2350 x 3000 mm, Weight: 2750 kg

Belt width: 400 mm, Power: 3 x 400V, 50Hz, 0.6kW, Dimensions: 1400 x 700 x 1650 mm, Weight: 166kg

Teflon infeed, separate infeed conveyor, hold down belt, circulation pump, oil level control, sediment removal, electrical hoists, prepared for CO2 fire extinguisher, Belt with: 600 mm, Frying length: 6000 mm, Heating: thermal oil, 388 kW, Frying time: 25 - 250 sec, Compressed air: 4 - 6 Bar, Power: 3 x 415V, 50Hz, 8kW, Dimensions: 8700 x 2300 x 3900 mm, Weight: 4250 kg

Including continuous belt washer, Belt width: 600 mm, Tiers: 2 x 4 pc., Belt length: 60 m, Product gap: 130 mm, Retention time: 2.9 - 29 min, Steam: NW40, 4 - 8 Bar, Exhaust: 2 x 2000 m³/h, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 27kW, Dimensions: 9200 x 3900 x 4700 mm, Weight: 13500 kg

Belt width: 400 mm, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 2500 x 900 x 1750 mm, Weight: 345 kg

Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, prepared for CO2 fire extinguisher, Belt width: 600 mm, Frying length: 6000 mm, Heating: thermal oil, 388 kW, Oil volume: +/- 1250 litre, Frying time: 25 - 250 sec, Power: 3 x 415V, 50Hz, 8kW, Dimensions: 8950 x 2050 x 3900 mm, Weight: 4250 kg

With belt washer and CIP system, Belt width: 400 mm, Tiers: 2 x 4 pc., Belt length: 44 m, Product gap: 130 mm, Retention time: 2.5 - 75 min, Temperature: max 200°C, Heating: thermal oil, 300kW, Exhaust: 2 x 2000 m³/h, Steam: NW40, 4 - 8 Bar, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 35kW, Dimensions: 8250 x 3150 x 4250 mm, Weight: 12000 kg

With extra infeed conveyor of 1800 mm, Including CIP tank and Bartec hygrophil, Switch cabinet separate, not connected to the machine, With optional outfeed conveyor of 1500 mm, Belt width: 600 mm, Cooking length: 7000 mm, Heating: thermal oil, 180kW, Steam: 4 - 8 Bar, Cooking time: 2 - 40 min, Compressed air: 6 - 10 Bar, Power: 3 x 415V, 50Hz, 13kW, Dimensions: 9800 x 2000 x 3150 mm, Weight: 5850 kg

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 °C Drive power:  ...

With adjustable take-over outfeed conveyor, Belt width: 400 mm, Filling capacity: 27 litres, Power: 3 x 400V, 50Hz, 0.7kW, Dimensions: 2860 x 750 x 1450 mm, Weight: 390 kg

Including:, CFS batter filter, Serial number: 94, Year of construction: 2002, Power: 3 x 400V, 50Hz, 0.12kW, Weight: 50 kg, Belt width: 600 mm, Dimensions: 1950 x 1200 x 1750 mm

With extra infeed conveyor, Belt width: 400 mm, Power: 3 x 400V, 50Hz, 0.7kW, Dimensions: 3000 x 850 x 1100 mm, Weight: 250 kg

Including trolley for removing breaking worm and trolley for screw, plates and knives, Hole plate diameter: 280 mm, Capacity: 5.5 - 8.5 t/h frozen blocks, Hopper: 600 litres, Power: 3 x 400V, 50Hz, 160kW, Dimensions: 3250 x 1650 x 2450 mm, Weight: 5000 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 120 x 45 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1360/600/H125 mm -Weight: 146 kg

Hold down belt, circulation pump, sediment removal, oil level control, manual hoists, prepared for CO² fire extinguisher, Belt width: 400 mm, Frying length: 3000 mm, Heating: electric, 66 kW, Power: 3 x 400V, 50 Hz, 72kW, Dimensions: 5400 x 1650 x 3150 mm, Weight: 2450 kg

Belt width: 600 mm, Grillength: 13000 mm, Retaining time: 2.5 - 50 min., Heating: thermal oil, 300kW, Steam: 4 - 8 Bar, Power: 3 x 400V, 50Hz, 18kW, Dimensions: 15000 x 2200 x 3100 mm, Weight: 10000 kg

Teflon infeed, hold down belt, circulation pump, oil level control, sediment removal, electric hoists, prepared for CO2 fire extinguisher, Including separate infeed belt, Machine delivered with CFS VTC1100-194 oiltank and oilpump, Belt width: 500 mm, Frying length: 3000 mm, Heating: electric, Power: 3 x 380V, 50Hz, 72kW, Weight: 2500 kg, Dimensions: 6300 x 1700 x 3100 mm

A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible.

A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible.

A complete Weber slicing and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2006. 2) Weber SCA scanning unit, year of manufacture: 2006. 3) Weber MCS 902 slicer, year of manufacture: 2006, product cross section X/Y: 380mm/125mm, max. product length: 1600mm, slice thickness range: 0.1mm-50mm. 4) Weber inspection and reject unit. 5) Weber transfer station. 6) CFS PowerPak 620, year of manufacture: 2005, film width range: 320mm-700mm, forming depth: 150mm. 7) 2x ELS OP2-SL6215-SMSK302 cross web labeling stations. 8) Videojet Excel 273se printer station. 9) Bizerba MD-SA-F1160/500/200 tunnel metal detector. This is a complete line including an edge trim unit and rewind station. Documentation available. An on-site inspection is possible.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59800 € : 1130.22 € : 100 to : 400 mm : 800 x 500 mm : 500 mm : 110 mm/s : 10 mm/s : 160 mm/s : 11 kW : 1900 mm : 1700 mm : 2930 mm : 5500 kg : 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created wi ...

: neu : Türkei : 70700 € : 1336.23 € : 100 to : 600 mm : 900 x 500 mm : 800 mm : 400 mm : 220 mm/s : 1 - 20 mm/s : 250 mm/s : 14,65 kW : 1900 mm : 1700 mm : 4400 mm : 6000 kg : 30 - 239 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Cooler Siemens electrical components 8 additional signal inputs and outputs 10-inch touchscreen PLC Siemens S7 1200 Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or SickTwo-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CFS oil filter, Type: OMR120, Serial number: 60, Year of construction: 2005, Dimensions: 2750 x 1100 x 1700 mm, Power: 3 x 380V, 50Hz, 4.5kW, Weight: 525 kg, Including pallet filterpaper, NN ambient cooling conveyor, Belt width: 950 mm, Belt length: 6000 mm, Belt: eye link belt of 3 mm, Compressed air: 6 Bar, Power: 3 x 380V, 50Hz, 2.7kW, Dimensions: 7600 x 1700 x 2000 mm, Variable speed control, Wanson Thermopac thermic boiler, Type: 200B, Serial number: 9335.56445, Year of construction: 1986, Heating: natural gas, Heating power: 233 kW, Power: 3 x 380V, 50Hz, 7.5kW, Dimensions: 3000 x 2450 x 2600 mm, Installation built into 10ft container, Belt width: 600 mm, Belt: Eyelink belt for extra small products, Frying length: 6000 mm, Heating: Thermal oil, Power: 3 x 400V, 50Hz, 8.6kW, Dimensions: 8700 x 2200 x 3800 mm, Weight: 4250 kg

General SKU297Y563 MakeCondux TypeCFS 8 LocationBarneveld Main Features Motor2.2 KW Inlet diameter60 mm Specified Features - Jet Mill Rotor size85 mm Grinding room sizeø 200x350 mm Housing dimensions ø 200x350 mm InletDN60 Motor2,2 kW (220/380 V 2840 rpm) Jet Mills MaterialStainless steel 1.4571 (316Ti) General Floor space1,15x0,40 m Total height0,95 m Weight210 + 70 kg Extra SpecificationsOutput DN35,&:nbsp:with K-tron screw feeder, type K2, with digi driver, 2000 rpm, input Dia. 220 mm, with stirrer.Jet MillsNew arrivalsConduxMills > Jet MillsNew arrivalsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

CFS Palazzolo S.p.A. thermoformer, type: SFC COMPACT M340 3.11, machine number: 788.120.1537, year of construction: 2002, 400 V, 3 PH, 50 Hz, 38.06 A, 26.37 kW, bottom film width: 343 mm, top film width: 332 mm, dye: (4x) 140 mm x 90 mm x 55 mm, total dimensions: 7800 mm x 1100 mm x 2000 mm.

CFS Germany GmbH thermoformer, type: Juniorpak 320, machine number: 905/1004, year of construction: 2007, 400 V, 3 PH, 50 Hz, 26 A, 17 kW, bottom film width: 320 mm, top film width: 316 mm, dye: 275 mm x 285 mm x 100 mm, plastic outfeed belt, belt width: 255 mm, total dimensions: 4760 mm x 1100 mm x 1920 mm.

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

- Toothed gear MWM 12302297 Original - Suitable for several motors - Please note! Price per piece! - 12302297 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Toothed gear MWM 12307524 - Please note! Price per piece! - 12307524 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.

TO WHOM IT MAY CONCERN ;

Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314

Pressure filler Vipoll GEA type: Visipraktik VKR-ES-DN 12-3 K capacity: up to 3.000 bph double pre-evacuation working hours: less than 1.000 for 330 ml bottles bottle diameter: 50 - 105 mm bottle height: 125 - 370 mm

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Total weight: 1000 kg

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.

Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.

Zelfuitlijnende draaiinrichting één aangedreven eenheid één niet-aangedreven eenheid WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 10 ton Number of wheels: 8 wheels Coating material on wheels: rubber

The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. Technical Specifications Type: M10-MBASE Heat transfer area: 2.6 m² Plate material: Stainless steel Alloy 316, thickness 0.50 mm Gasket material: NBRFF Clip-On (Nitrile rubber) Plate pack thickness: 63 mm Total weight: 232 kg Total volume: 13 liters Dimensions: Height 672 mm, width 618 mm, depth 530 mm Connection standard: DIN NW100 Bolts: M20 Expandable: up to 17 additional plates Operating Data Design pressure: 10 bar Test pressure: 14.3 bar Design temperature: up to 120 °C Minimum temperature: 0 °C Typical flow examples (according to datasheet): Wine: 2,000 L/h (heating 12 ? 17 °C, ?p = 47 kPa) Hot water: 2,000 L/h (cooling 30 ? 24 °C, ?p = 22 kPa) Fruit juice: 240 L/h ( ...

Technical specifications: Type 6500/075 as a processing plant with an indirect heating system. Serial number of the plant: 95711701. Year of manufacture: 1996/2003. Capacity: 7,500 l/h - Product inlet temperature approx. 6 °C - Sterilization temperature 139 °C - Product outlet temperature approx. 25 °C Products: Long-life milk, milk-based mixed drinks, coffee cream, cream, various liquid products. Including: - Homogeniser NIRO-SOAVI, Type 3075/55, Operating pressure 220bar, 2.stage 45bar. - GEA-CIP-Unit, FINAMAT Complete with valves and pumps, - Aseptic-tank, GEA-FINNAH, Make: RITTER GMBH, Serial No. 95710 903 Operating pressure: -1/+3.5 bar pü at 150°C Operating volume 10.000 ltr. - Several Electrical and pneumatic Controll cabinets. All equipment is still complete installed.

Zelfuitlijnende lasrolstelling één aangedreven eenheid één niet-aangedreven eenheid minimale/maximale werkstukdiameter: 500/4500 mm snelheid: 70 gt; 1200 mm/min vermogen: 2 kW - 15,8 ampère WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 20 ton Number of wheels: 8 wheels Coating material on wheels: rubber

Palletizer GEA Procomac Opera year of manufacturing: 2009 including: - complete pallet conveyor system - pallet magazine - Robopac stretch wrapping machine - mother pallet handling - Logopack pallet labelling system The GEA Procomac Opera is a low-level infeed palletizer designed for low to medium production capacities. It offers automatic changeover for different pallet patterns and pallet sizes, ensuring reliable and flexible end-of-line palletizing. Availability: End of September 2026

Decanter GEA UCD 305-00-32 Control Panel Year 2020