129,383 used machines on RESALE, but how to find them? Machine Search
Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11
Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg
MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;
Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used
PRIMULTINI log bandsaw line, type SIB-1600-CFK-IFB, Consisting of:, PRIMULTINI hydraulic log carriage, type CFK, - undependable headblock movement, - 5 pc hydraulic headblocks, - Opening headblocks horizontal 1000 mm, - Each headblocks with brushless motor for movement, - Distance between headblocks 1400 – 1750 – 2000 – 3350 mm, - Length log carriage ca. 10,5 meters, - Each headridge with double hydraulic centering pad, - Integrated log turners, PRIMULTINI hydraulic driven rope feeding, type IFB, With separate motor, with 55 kW power, with rails, total length 30 meters, SWECAN chipper canter machine, Motor power 75 kW, Control cabin with MUDATA touch screen controller, RIMULTINI band saw machine, type SIB 1600, - Diameter flywheels 1600 mm, - Width of flywheels 245 mm, - Maximum sawblade 260 mm, - Saw blade protection, - Blade guide with hydraulic pressure, - Electric adjustment bl ...
Type: TRC1000/600 Serial number: 2661 Year of construction: 2011 Belt width: 600 mm Transport length: 1000 mm Belt speed: 2.5 - 25 m/min Power: 3 x 400V, 50Hz, 0.37kW Dimensions: 1000 x 1000 x 1450 mm Weight: 120 kg
Type: WTC600 Belt width: 600 mm Power: 3 x 400V, 50Hz, 0.7kW Dimensions: 1950 x 1200 x 1750 mm Weight: 185 kg CFS batter filter Type: BTF Serial number: 94 Year of construction: 2002 Power: 3 x 400V, 50Hz, 0.12kW Weight: 50 kg
Type: FLC8000/600 Serial number: 371 Year of construction: 2004 Belt width: 600 mm Cooking length: 7000 mm Heating: thermal oil, 180kW Steam: 4 - 8 Bar Cooking time: 2 - 40 min Compressed air: 6 - 10 Bar Power: 3 x 415V, 50Hz, 13kW Dimensions: 9800 x 2000 x 3150 mm Weight: 5850 kg With extra infeed conveyor of 1800 mm Including CIP tank and Bartec hygrophil Switchcabinet separate, not connected to the machine With optional outfeed conveyor of 1500 mm
Type: EFR3000/650E Serial number: 1917 Year of construction: 2013 Belt width: 650 mm Frying length: 3000 mm Heating: electric, 90kW Frying time: 25 - 250 sec Power: 3 x 400V, 50Hz, 99kW Dimensions: 6100 x 2350 x 3000 mm Weight: 2750 kg Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, electric hoists, prepared for CO2 fire extinguisher
Height=2.1 m, Overall length= 1.45 m, Overall width= 3.25 m, Net weight= 300 kg,
A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible.
Height=1.75 m, Overall length= 0.75 m, Overall width= 1.35 m, Net weight= 17 kg,
Height=1.9 m, Overall length= 1.3 m, Overall width= 3.5 m, Net weight= 1110 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,
Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,
Height=2.51 m, Overall length= 1.3 m, Overall width= 3.25 m, Net weight= 1750 kg,
Height=2.2 m, Overall length= 1.15 m, Overall width= 2.05 m, Net weight= 1535 kg,
a 2-row tortilla oven, gas-powered by the Superior brand (USA). Possible hourly output of 15cm tortillas is a total of 6000 to 7000 per hour
Height=1.15 m, Overall length= 0.85 m, Overall width= 0.7 m, Net weight= 83 kg,
Type: WTC400 Serial number: 1961 Year of construction: 2010 Belt width: 400 mm Power: 3 x 400V, 50Hz, 0.6kW Dimensions: 1400 x 700 x 1650 mm Weight: 166kg
Type: BR3000/600 Serial number: 1419 Year of construction: 2002 Belt width: 600 mm Frying length: 3000 mm Heating: electric, 80kW Power: 3 x 400V, 50Hz, 90kW Dimensions: 5400 x 1750 x 2800 mm Hold down belt, sediment removal, circulation pump, manual hoists
Height=1.97 m, Overall length= 1.1 m, Overall width= 7.3 m, Net weight= 2600 kg,
Type: OPF600 Serial number: 1541 Year of construction: 2005 Belt width: 600 mm Power: 3 x 400V, 50Hz, 2.5kW Dimensions: 3000 x 1700 x 2100 mm Weight: 1025 kg
1. Speed: 1,000- 1300ctns/hr 2. Model: CFL-2500TB 3. Carton Size: L: 200 mm W:200mm to 500mm H: 160mm to500mm 4. Machine dimension: L: 1000 mm W: 900 mm H: 1375 mm 5. Tape width: 48mm; Tail: 50mm 6. Machine weight: 126kg 7. Power: 1 phase 240V, 50/60Hz
Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible.
Type: ER600 Serial number: 109 Belt width: 600 mm Belt speed: 1.5 - 15 m/min Filling level: minimal 15 litres Power: 3 x 380V, 50Hz, 0.61kW Dimensions: 1400 x 900 x 1750 mm Weight: 145 kg Fully overhauled, including new controls.
Key data: 1047 KW, 1251 kVA, 10000 V
KKK Back Pressure Steam Turbine CFR 5 G5 Electricity generators from 1995, Turbine with AC generator and control system. 1 available. Inlet pressure 8.5 – 15 bar, outlet pressure 0.5 – 3 bar, 1,000 KWel x 1500 rpm, 10 KV/50 Hz. AC Generator: Leroy Somer LSA 52 VLS-4P, 1,251 KVA Manufacturer: KKK Model: CFR 5 G5 Type: Steam Back Pressure Serial number: 4 555 020 Power [KW]: 1047 Pressure inlet [bar]: 8.5 – 15 – Norm: 12 Temperature Input [°C]: 290 – 390 Pressure output [bar]: 0.5 – 3 – Norm: 2 Year of Make: 1995 Dimensions LxWxH [m]: 3.60 x 2.20 x 2.20 AC Generator LSA 52 VLS-4P Manufacturer: LSA Model No.: 52 VLS-4P Type: AC Synchronous Generator Serial Number: 162554-1 Power [KVA]: 1,251 Voltage [V]: 10,000 Frequency [Hz]: 50 Current [A]: 72 Speed [1/min]: 1500 Year of Make: 1995
Type: BR6000/600 Serial number: 1382 Year of construction: 2001 Belt width: 600 mm Frying length: 6000 mm Heating: thermal oil, 388 kW Oil volume: +/- 1250 litre Frying time: 25 - 250 sec Power: 3 x 415V, 50Hz, 8kW Dimensions: 8950 x 2050 x 3900 mm Weight: 4250 kg Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, prepared for CO2 fire extinguisher
Type: CookStar CKH400/8/130 Serial number: 138 Year of construction: 1994/2002 Belt width: 400 mm Tiers: 2 x 4 pc. Belt length: 44 m Product gap: 130 mm Retention time: 2.5 - 75 min Temperature: max 200°C Heating: thermal oil, 300kW Exhaust: 2 x 2000 m³/h Steam: NW40, 4 - 8 Bar Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 35kW Dimensions: 8250 x 3150 x 4250 mm Weight: 12000 kg With belt washer and CIP system
Type: STS600/8/130 Serial number: 60 Year of construction: 1999 Belt width: 600 mm Tiers: 2 x 4 pc. Belt length: 60 m Product gap: 130 mm Retention time: 2.9 - 29 min Steam: NW40, 4 - 8 Bar Exhaust: 2 x 2000 m³/h Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 27kW Dimensions: 9200 x 3900 x 4700 mm Weight: 13500 kg Including continuous belt washer
Type: BR8000/600 Serial number: 1242 Year of construction: 1999 Belt width: 600 mm Frying length: 8000 mm Frying time: 30 - 300 sec Heating: electric, 175kW Oil volume: min 1485 L Power: 3 x 400V, 50Hz, 190kW Dimensions: 11700 x 1480 x 3850 mm Weight: 4850 kg Hold down belt, sediment removal, oil level control, circulation pump, prepared for CO2 fire extinguisher
pressure: 150 t throat: 400 mm stroke: 400 mm dayligth: 600 mm table surface area: 1000 x 600 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: mm ram surface: 1000 x 600 mm working feed: 5 - 15 mm/sec speed down: 130 mm/sek speed up: 180 mm/sek power requirement: 18 kW weight of the machine ca.: 12,0 t dimensions: 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solu ...
Height 2700 mm Width 2400 mm Length 3200 mm Capacity 2000 l Electrical Supply: 400V 50Hz 3N Total power 75 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 250 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant Description The wolf-mixer has an infrared MultiTrack analyzer. It analyzes the fat, protein and water content of meat. Approximate accuracy: approx. 2%.
Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm
Año de Fabricación 1999 CNC HEIDENHAIN TNC-430 Superficie de la mesa 2500 X 700 mm. Recorrido Longitudinal (Eje X) 2500 mm. Recorrido Transversal (Eje Y) 800 mm. Recorrido Vertical (Eje Z) 800 mm. Avances (X/Y/Z) 5.000 mm/min Avance Rápido Ejes 12.000 mm/min Cono Cabezal ISO 50 Gama de Revoluciones 4000 rpm Potencia de cabezal 22 Kw Peso Admisible sobre mesa 4.000 kg. Peso de la Máquina 10.000 kg. Cabezal Automático 2,5° / 2,5° Amarre Hidráulico de Herramientas INCLUIDO Dimensiones Maquina 6450X2700X2830 mm
pressure: 100 t throat: 250 mm stroke: 400 mm dayligth: 500 mm table surface area: 800 x 500 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: 500 mm ram surface: 800 x 500 mm working feed: 10 mm/sec speed down: 110 mm/sek speed up: 160 mm/sek power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions: 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solut ...
CONTROLS CNC controls HEIDENHAIN I TNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 540 mm Y-axis travel: 540 mm Z-axis travel: 560 mm TABLE table surface (left-right): 700 mm table surface (front-back): 520 mm SPINDLE / HEAD spindle revolutions (max): 8000 /min tool fixture: ISO SK 40 AXIS DRIVES feed velocity (max): 20000 mm/min rapid traverse: 30000 mm/min TOOL MAGAZINE number of positions: 21 tool diameter max.: 80 mm - with free neighbour positions: 160 mm tool length max.: 385 mm tool weight max.: 6.8 kg ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requireme ...
CNC vertical machining center Type: MAG CFV-1300i Manufacturer: Cincinnati Year: 2010 Control: Heidenhain TNC 530 X: 1300 mm Y: 540 mm Z: 720 mm Maximum table load: 1000 kg Max spindle speed: 9000 rpm Tool magazine: 24 positions Internal cooling Chip conveyor 4 pcs hydraulic vices Tool holders SK40 approx. 24 pcs New spindle In good condition, under power Find more here - / Contact us at -
Manufacturer: Cincinnati Model: Lamb CFV 1050i Year of Manufacture: 2008 Axis Travel - X-axis: 1,050 mm - Y-axis: 540 mm - Z-axis: 720 mm Control System - Control: Heidenhain iTNC 530 Tool Changer - Automatic tool changer: 30-position Electrical Data - Power supply (3-phase): 208 / 220 / 230 / 240 / 380 / 415 / 460 / 480V - Frequency: 50/60 Hz - Power supply (1-phase): 230V - Frequency: 50/60 Hz - Control voltage: 24V - Capacity: 60 kVA - Current (3-phase): 10 A - Current (1-phase): 17 A Find more here - / Contact us at -
sheet width: 1350 mm : 3 mm sheet thickness for stainless steel: 1,5 mm rear stop: 600 mm total power requirement: 3 kW weight of the machine ca.: 1150 kg dimensions: 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity The data for this ad was created with ModulMWS - the software solution o ...
Moravek CW Carbonator & Bottle Filler. Twin-head machine. Various Prices as we currently have a few in stock. - Please Enquire Product is carbonated immediately product prior to filling. Range of bottle sizes from 0.2 litres to 2 litres capacity. Filling of glass bottles and P.E.T. bottles. Filling still or carbonated product. Suitable for a wide range of beverages including beer, wine, soft drinks, mineral water, cider and champagne. Simple to operate and flexible. Capable of carbonating at ambient temperature. Available with additional chilling, if required. Compact. Occupies minimal floor space. Integral product pump. Simple to change bottles sizes. All stainless steel construction. This is a second hand machine offered in good condition. For more information and more available stock please visit us at - advancedbrewing.co.uk
Single head semi automated cask filling machine, that incorporates isinglass finings dosing. Manufacture : Microdat Model: CF55 Year of Manufacture: 2013 Single phase For more information and more available stock please visit us at - advancedbrewing.co.uk
CONTROLS CNC controls SIEMENS SINUMERIK 840 D FEEDSTOCK TUBE external diameter min.: 10 mm external diameter max.: 90 mm wall thickness min.: 0.8 mm length min.: 100 mm lenght max.: 2000 mm
Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives
Can filling line CFT capacity: 12.000 cph year of manufacturing: 2017 can size: 150 ml Slim line / 200 ml Slim line / 330 ml Standard lid size: 200 and 202 filling products: carbonated water and drinks consisting of: 1. Can depalletizer CFT type 101 2. Can filler type: Master-Can Tronic RS24/4 with 24 filling valves 3. Can seamer CFT 3000/4 with 4 seaming heads 4. Wrap around can packer SMI to pack 2x2 and 2x3 cans 5. Can tray shrink packer SMI to pack 4x3 cans 6. Stretch wrapper (semi automatic)
Model: ESF400 Year: 2007 Condition: Used Serial Number: 2288 Stock Number: 3295 Belt width: 400 mm Capacity: max 30 strokes/min Hopper: 250 litres Water: max 4 Bar Compressed air: 6 Bar, 300 l/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2250 x 900 x 2350 mm Weight: 780 kg With bridge breaker
maximum number of results exceeded
please refine your search
