cf used for sale

Manufacturer: HEIN Type: CFR-210-255 SN: Device 1: FR-210-112 Part Number: 080996-1 / Device 2: FR-210-112 Part Number: 080996-2 Year of construction: 2009 Width 2.25m Height 2.5m Length 2.1m

Counting scales, scales, parcel scales, digital scales -Manufacturer: Kern, counting scale type CFS 6KO.1 -Weighing range: max. 6 kg -Division: 0.1 g -Dimensions: 340/315/H130mm -Own weight: 3.2 kg

Belt width: 1000 mm, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 2650 x 1800 x 2400 mm, Weight: 1000 kg

Centrifugal pump with magnetic coupling. General characteristics: Manufactured by STERLING SIHI Model CBED 040160-165 CF2ET4B2N Type ATEX Year built 2006 Motor characteristics: Power 5.5 kW - 7.37 cv Frequency 50 Hz Rotational speed 2910 rpm

Forming machine for meat and alternatives

power capacity: - kW volt: max 400 V ampere: max 13,2 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm

CFS cooling tunnel, type: CLT 3000/500, serial number: 211, year of construction: 2001, 400 V, 3 Ph, 50 Hz, 4.02 A, 0.96 kW, weight: 275 kg, s/s mesh belt, belt width: 500 mm, transport length: 3000 mm, clearance: 500 mm x 145 mm, 2 ventilators, total dimensions: 3500 mm x 780 mm x 1520 mm.

CFS mobile lifter for 200 liter meat bins, type: 300S, serial number: 10000, year of construction: 2002, 400 V, 3 Ph, 50 Hz, 2 A, maximum capacity: 300 kg, lifting height: 2200 mm, total dimensions: 1480 mm x 1480 mm x 3180 mm.

Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp

CFS mobile battering machine, type: ER-400, serial number: 623, year of construction: 2002, 400 V, 3 Ph, 50 Hz, 0.62 kW, weight: 165 kg, s/s mesh belt, belt width: 400 mm, total dimensions: 1400 mm x 800 mm x 1450 mm.

CFS mobile forming machine, type: VM 400 HSE, machine number: 2131, year of construction: 2000, 400 V, 3 Ph, 50 Hz, 16.95 A, 7.77 kW, weight: 1186 kg, s/s mesh belt, belt width: 400 mm, total dimensions: 3050 mm x 1050 mm x 2380 mm. Including BDG 400 HSE infeed hopper with mixing arm.

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0815LDS Load capacity: 450 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.77 m x 1.50 m Height: 2.46 m Railing folded down Height: 1.87 m Weight approx.: 3253 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 30 % Drive via battery 8x6V / 240 Ah Integrated charger 48V/40 A Support with automatic level compensation. Light Non Marking Chains German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in ...

Key data: 825 , 975 , 400

Steam turbine Generator CCC CFR 3 G5 780 KWe x 1,500 rpm 50 Hz 400 V Turbine backpressure Manufacturer KKK Model CFR 3 G5 P drive [KW] 780 Vapor pressure [bar] 39 - 48 / 43 norm Exhaust pressure [bar] 7 - 9 / 7,85 norm Generator Manufacturer AVK Model DKBN 100M/1100-4 P Generator [KVA] 975 Revolutions [per min] 1,500 Voltage [V] 400 Current [A] 1,407 Scope of delivery: The genset consists of the turbine and the generator. Technical documentation: available Spare parts / tools: not available The genset was dismantled in a working condition Sale takes place "as is" or after prior inspection on request, FCA free.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: CFS; Model: TIROMAT Compact 420; Year of production 2001; Working with soft foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 430mm; Forming width: 380mm; Molding depth: 130 mm; Formats: 2.2; Length: 6700 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg

continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0710LDS Load capacity: 230Kg Lifting capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Extendable platform + 0.90 m Transport Dimensions 2.45 m x 1.01 m Height: 2.18 m Railing folded down Height: 1.83 m Weight approx.: 1940 Kg Working height: 8.7 m Platform height: 6.7 m Climbing ability up to: 25 % Drive via battery 24V / 260 Ah Integrated charger 24 V/ 36 A Support with automatic level compensation. non-marking chains German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA wil ...

USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; Wheel-mounted work platform; lifting platform; Lifting platform with support Type: CFPT1218RTE Payload: 365 kg Lifting capacity platform extension: 140 kg Platform dimensions: 2.91 x 1.53 m Extendable platform + 1.44 m Transport dimensions 3.34 m x 1.79 m Height: 2.77 m Railing folded down Height: 2.11 m Weight approx.: 4900 Kg Working height: 14 m Platform height: 12 m Climbing ability up to: 35% Drive via battery 8x6V / 240 Ah Integrated charger 48V/35 A Support with automatic level compensation. Light Non Marking Tires German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in  ...

completely stainless steel electrically heated (= 324 kW) Total assets 343 kW Teflon Insertion Tape Belt length 6,000 mm Track width 650 mm suitable for fire protection Stepless speed suitable for fire protection Discharge belt Oil level control Circulation Pump Dirt transport Filter electric hoist Dimensions (L x W x H) : ± 9,700 x 2,200 x 3,000 mm Weight : 5.350 kg suitable for cleaning system "CIP" Capacity : 3 x 400V, 50Hz

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0405DC Load capacity: 240 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.35 x 0.7 m Extendable platform + 0.60 m Transport dimensions 1.54m x 0.81 m Height: 2.15 m Railing folded down Height: 1.79 m Weight approx.: 990 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25 % Battery-powered 4x12V / 100 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade  ...

AIRCOOLED CHILLER Stulz Cfo4202A 425 kW Cooling capacity: 425 kW / 120.8 tons (12/7 — 35°C) Year of manufacture: 2008 Options: Freecooling Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Type of refrigerant: R410A Compressors: 3 pcs. Copeland ZP385KCE-TWD-522 / 3 pcs. Copeland ZP295KCE-TWD-522 (scroll) Number of fans: 8 pcs. Dimensions: 3.9х2.3х2.4 m. Condition: Good

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0608DC Load capacity: 240 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.37 x 0.7 m Extendable platform + 0.60 m Transport dimensions 1.54m x 0.81 m Height: 2.19 m Railing folded down Height: 1.83 m Weight approx.: 1260 Kg Working height: 7.6 m Platform height: 5.6 m Climbing ability up to: 25 % Powered by battery 4x12V / 115 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tr ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0808NP Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 0.81 m Extendable platform + 0.90 m Transport dimensions 2.48 m x 0.82 m Height: 2.36m Railing folded down Height: 2.00 m Weight approx.: 1970 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 25% Drive via battery 4x6V / 200 Ah Integrated charger 24 V/ 36 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade fair fr ...

scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT1012 Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport Dimensions 2.48 m x 1.21 m Height: 2.48 m Railing folded down Height: 1.92 m Weight approx.: 2932 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25% Drive via battery 4x6V / 240 Ah Integrated charger 24 V/ 36 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade fair from the Bauma location. The price refers to pick-up from the Munich location. The machines can be lo ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0408DC Load capacity: 200 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.23 x 0.65 m Extendable platform + 0.60 m Transport Dimensions 1.45 m x 0.78 m Height: 2.08 m Railing folded down Height: 1.70 m Weight approx.: 900 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25% Drive via battery 4x12V / 120 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tra ...

1). Filling Machine: SIG Combibloc CFA209-32 , year: 2004 2). Buffer Table: Meurer CM/HSP, year: 2006 3). Capper: SIG all Cap, ACF , year: 2004 4). Tray Packer: Meurer HTW Wrap around, year: 2006 Volume: 500 ml , 750 ml, 1000 ml Machine output: 9000 p/h

Meat mixer CFS Capacity: 1400 liters Dimenzije: 2600 x 1700 x 2300mm

Koppens/CFS Crumb Auger Feeder Model: BRF200 Built 2003 Screw auger feeder designed to feed a breading machine

Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11

PRIMULTINI hydraulic log carriage, type CFE, Consisting off:, PRIMULTINI hydraulic log carriage, type CFE, - 5 pc. hydraulic headridges, - Distance between headridges 1300 – 2250 – 2250 – 2250 mm, - Opening headridges horizontal 1000 mm, - Opening vertical of clamps 900 mm, - Each headridge with double hydraulic centering pad, - 4 pc. integrated hydraulic log turners, - Total length carriage ca. 8500 mm, - For log length 10 meter, - With rails, length 25.5 meter, PRIMULTINI hydraulic driven rope feeding, type IFB, PRIMULTINI control unit with Mudata controller and electric cabinets

Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used

PRIMULTINI log bandsaw line, type SIB-1600-CFK-IFB, Consisting of:, PRIMULTINI hydraulic log carriage, type CFK, - undependable headblock movement, - 5 pc hydraulic headblocks, - Opening headblocks horizontal 1000 mm, - Each headblocks with brushless motor for movement, - Distance between headblocks 1400 – 1750 – 2000 – 3350 mm, - Length log carriage ca. 10,5 meters, - Each headridge with double hydraulic centering pad, - Integrated log turners, PRIMULTINI hydraulic driven rope feeding, type IFB, With separate motor, with 55 kW power, with rails, total length 30 meters, SWECAN chipper canter machine, Motor power 75 kW, Control cabin with MUDATA touch screen controller, RIMULTINI band saw machine, type SIB 1600, - Diameter flywheels 1600 mm, - Width of flywheels 245 mm, - Maximum sawblade 260 mm, - Saw blade protection, - Blade guide with hydraulic pressure, - Electric adjustment bl ...

A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible.

Height=2.1 m, Overall length= 1.45 m, Overall width= 3.25 m, Net weight= 300 kg,

Height=1.75 m, Overall length= 0.75 m, Overall width= 1.35 m, Net weight= 17 kg,

Height=1.9 m, Overall length= 1.3 m, Overall width= 3.5 m, Net weight= 1110 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,

Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,

Height=2.51 m, Overall length= 1.3 m, Overall width= 3.25 m, Net weight= 1750 kg,

Height=2.2 m, Overall length= 1.15 m, Overall width= 2.05 m, Net weight= 1535 kg,

a 2-row tortilla oven, gas-powered by the Superior brand (USA). Possible hourly output of 15cm tortillas is a total of 6000 to 7000 per hour