cf 150 used for sale

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 170/60/H140 mm -Weight: 2.0 kg/piece

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.5 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg

The blower stage is completely overhauled and can also be offered as a complete unit.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder stroke 150 mm -Type: HN3-GHI 80/55-150 DH -Piston rod: Ø 55 mm / M34 -Hole: Ø 40 mm -Dimensions: Ø 128 x 545 mm -Weight: 24.4 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA50-150 -Projection: 150 mm -Dimensions: 275/80/H140 mm -Weight: 10.3 kg

-Planetary Mixer Manufacturer: Wodschow & Co Denmark -Type: R 150 -without boiler and without tools

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

RUHLE / RÜHLE MPR 150 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 150 liters tumbler capacity

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc -Manufacturer: 3M Scotch-Brite, coarse cleaning disc type CG-DC Ovp 6 pieces -Art.No.: 61122 -Diameter: Ø 150 x 13 mm -Shipping/Price: complete -Transport dimensions: Ø 150 x 90 mm -Weight: 0.3 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see photos -Dimensions: 340/200/H260 mm -Weight: 20.4 kg

Used pipetting robot Tecan EVO 150 with Tecan dongle and CDs and accessories .

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with groove, solid design -Groove width: 24/31 mm -Dimensions: see photos / technical drawing -Dimensions: 150/120/H95 mm -Weight: 7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: MK7/4 -Dimensions: Ø 70/150 mm -Weight: 3.3 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 150 mm -Type: unknown -Mounting: Ø 55 mm -35 teeth: belt width 25 mm -Division: see photos -Quantity: 1x timing belt pulley available -Dimensions: Ø 150 x 45 mm -Weight: 3.4 kg

Gearboxes, spur gears, angle gears, worm gears, bevel gears -Manufacturer: Marzorati, gearbox type A 150 with magnetic filter -Shafts: Ø 32 x 45 mm -Dimensions: 310/275/H200 mm -Weight: 19.6 kg

Cable bridge, drive-over protection, hose bridge, cable duct -Cable bridge: overrun protection -Channel width: 20 mm -6 mounting recesses -Quantity: 1 piece available -Dimensions: 985/150/H30 mm -Weight: 4.2 kg

Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!

Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty

-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M16 -Quantity: 1 piece available -Dimensions: Ø 150 x 40 mm -Weight: 1.1 kg/piece

Mixer for granules and powdered products Mixomat. Completely in stainless steel. Mixing tanks on load cells. Tegiloxane pump. Vacuum pump AZO 5.5 kW. Granulate gate valve NW 100.

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M10 -Quantity: 1 piece available -Dimensions: Ø 150 x 43 mm -Weight: 1.1 kg/piece

FLUIDISED BED Drier/ Cooler BUHLER OTW 150, with a complete peripherical ( see description) in very good condition, was stored for years and NOT USED Suitable for pellets, cereal flakes, extrudates...many other types of materials.or products.. Come along with it : 2 fans, a very nice cyclone , a steam battery to pulse hot air, pipes... Can be used according to alternative ways : whether to dry out materials.. or to cool, a simple inversion of hot or cool air has to be choosen More pictures available, great money spares compared to a new one... Can be shipped to any destination

BUHLER OTW 150 fluidized bed dryer/cooler, with a complete device (see description) in very good condition, has been stored for years and NOT USED Suitable for pellets, cereal flakes, extrudates... many other types of materials. or products. Sold with: 2 fans, a very nice cyclone, a steam battery to pulse hot air, hoses... Can be used in alternative methods: whether for drying materials. or to cool, you have to choose a simple inversion of hot or cold air More photos available, a lot of spare money compared to a new one... Can be shipped to any destination

Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel

Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt widths: 15 mm -Length: 400 mm -Adjustable speed: 14-56 m/min -Number: 2x conveyors available Price: per piece -Weight per piece: 88 kg

for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG

Compact slitting line, with uncoiler, loading prism, pressure arm AH 1500/5000 kg, clamping range 480 - 550 mm, with 3 arched tables, with 4 overflow tables, with 2 bases, with 2 stairs, with guillotine shears for cutting to length, foil holder with brake, with 5 pairs of knives Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.0 mm Color: Blue Total power requirement: 3 x 400 V Machine weight: 9100 kg Dimensions: 11541 x 5300 x 1770 mm Coil weight: 5000 kg Straightening rollers: 7 Number of blades: 5 pairs Straightening rollers at the top: 3 Straightening rollers at the bottom: 4 Speed: 35 m/min Machine Number: K08258

Capacity: 150 kg (480 kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phases Pneumatic green coffee loader, stone selector and cyclone included : Natural gas burner: The roaster is completely renovated with: with speed control on stone selector, new drum and exhaust fan New pneumatics new control cabinet and controls (PLC and touch screen, Artisan and Cropster connection possible) A visit to the roaster is possible at any time.

Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

REF-2741 KRONEN SPIRELLO SP150 VEGETABLE SPIRAL CUTTING MACHINE Manufacturer: KRONEN Model: SPIRELLO SP150 Serial no.: 199 Year: 2017 Automatic machine for cutting vegetables into long spirals. With a capacity of up to 340 kg/h (depending on the product), the SPIRELLO 150 is an unbeatable option for processing large amounts of vegetables into perfect and decorative spirals and strips. Mobile on casters for easy movement. Electrical specifications: 230 V/50 Hz/0.9 kW/1PH Working pressure: 6 bar Two product centring units: diameters 85 mm and 150 mm Max. product length: 300 mm Max. product weight: 2,5 kg Overall dimensions (mm): 850 x 600 x 1,800 (LxWxH) Weight: approx. 180 kg CE marking

6-sided packaging machine from the manufacturer Mac Due, model: Maxi 120/A and integrated shrink tunnel T.150-80 R. suitable for dimensions: 1000 x 1700 x 500 mm. Dimensions complete system: 11245 x 2170 x 2460 mm incl. extensive documentation Viewings possible at any time by arrangement.

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg

used spiral mixer Kemper SP 150 AL extendable, overhauled, for 150 kg flour, 2 clocks (overhauled), with 1 stainless steel kettle, if required another boiler available, stainless steel spiral, newly painted, new electrics, new bearings, new V-belts, No. 6726916/610047, 400 V, 50 A, 50 Hz

DEFUM WHB 150 horizontal boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of heavy workpieces of complex geometry, which are used in a wide range of industries. Thanks to its design and wide machining capabilities, it is ideal for, among others, the machinery, automotive, shipbuilding industries and wherever high accuracy is required. The DEFUM WHB 150 enables a number of complex machining operations to be performed, such as boring, hole drilling and milling. Machining is performed by a spindle with a diameter of 150 mm that ensures maximum accuracy even under heavy loads. The workhead moves in four axes with feeds of 7000 mm (X axis), 3000 mm (Y axis), 1200 (Z axis) and 500 mm (W axis). The installed SONY digital readout, distinguished by its high measurement accuracy, continuously monitors the posi ...

KT7 CNC KSP 150-300 SPEED plasma cutting machine was manufactured in 2019 in Poland. The machine, designed for precision machining of workpieces with a maximum weight of 4 tonnes, is an excellent choice for small businesses as well as for large industrial plants. Its compact design and all components have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. The SPEED KSP 150-300 plasma cutting machine is also equipped with, among others, a WALTER refrigeration dryer and many useful systems that increase precision and production efficiency. The total weight of the machine is 850 kg. Technical specifications of the KT7 CNC KSP 150-300 SPEED plasma cutting machine - work table dimensions (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110 mm - travel speed: 25000 mm/min - working speed: up to 10000  ...

Part number 7975 SPECIFICATIONS - Inlet width 450mm - Inlet height 250mm - shaft width 530mm - knife length 530mm - number of knives 2pcs - sieve dimensions 50x50mm - 2 gear pulling shafts from the bottom - lower shaft motor about 2.2kW - Pulling shaft geared from above - upper shaft motor about 2.2kW - conveyor belt - Conveyor belt length 6500mm - conveyor belt width 400mm - main motor 37kW - 0.37kW conveyor motor - autorever (adjustable) - overall dimensions of the machine l/w/h 2400x1300x1100mm - overall dimensions of the conveyor belt length/width/height 6600x610x550mm - weight about 2500kg – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – with a 6500mm conveyor belt – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR  ...

TECHNICAL SPECIFICATIONS Manufacturer: Tecnomeccanica ZUERCHER S.p.A. Bergamo Description: Floating grab dredger Design: Grab excavator with gantry body Type: TZBK 150 (15t) Year of manufacture: 1989 - Revised: 2017 Gripper volume: 4.50 cbm Shell grab type: MRS 1090, rope mechanical Total load capacity grab: 15.0 to. Max. dredging depth: 60 m underwater Conveying capacity: approx. 100 cbm/h (approx. 180 t/h) Power supply: SENN generator set (BJ 2017) Unit Type: FDG 650 Engine: VOLVO TWD 1653 GE (6-cylinder) Rated power: 650 kVA (547 kW) Particulate filter system: CLEAN LIFE, type SMF-AP 8.1 Pre-screen bar grate available: yes Screening machine: 1-deck, with shower Dewatering Bucket Wheel: SMT Stitch Type: E3009 (BJ 2017), 3.0 kW Number of mooring winches: 4 pcs. Number of discharge belts: 4 pcs. Overall length: 25,190 mm Total length pontoon: 20,800 mm Overal ...

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

Specifications Compact and reliable lifting solution for workshops and production environments The BPL Flexiheffer jib crane is an ideal solution for safely and efficiently moving loads up to 150 kg. The crane is designed for intensive daily use and offers a large working range thanks to the smooth jib arm. Technical Specifications Brand: BPL Type: Flexilifter 150‑R4‑L‑1500‑0 Year of construction: 2003 Height 2, 872 mm, width : 500 mm, length 1,878 mm Maximum lifting capacity: 150 kg, lifting stroke 1,500 mm Swing radius: 4,000 mm Construction: Steel column + swing arm Operation: Manual, smooth running Condition: Well-maintained, fully functional Connection: compressed air min. 6 bar, 700 NL/min ⭐Key Benefits Safe and ergonomic working with light to medium loads Compact design – ideal for workshops with limited space Smooth swivel movement for fast an ...

; Power [PS]: 163; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

; Gross weight [kg]: 2100; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 289

; Gross weight [kg]: 1918; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 349