cf 150 used for sale

pallet roller conveyor 1500-1040-900 RA2441 Pallet roller conveyor segment, continuous design length: 1500 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 0,75 kW Construction year: 1998 condition: good (used) Conveying length in mm: 1500 Nominal / outside width in mm: 1040 Roll width in mm: 900 Roll division in mm: 200 Driven: YES scope of delivery: including supports without side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...

Tumbler Manufacturer: Eller Capacity: 1500 liters Completely out of stainless steel

RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year.; Gross weight [kg]: 11481; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000

Cylindrical grinder TOS BHU 50/1500

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1400x1750 mm Weight: 1800 kg Total power requirement: 5 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2040x1495x1025 mm Weight: 540 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2900x1800x1100 mm Total power requirement: 1,5 kW Weight: 550 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1350x1150 mm weight: 500 kg total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x2900x850 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2120x1585x1025 mm Weight: 560 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2985x2160x2000 mm Weight: 2000 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

laser capacity in Watt: 130 / 150 Peak working area: 1300x900 mm Dimensions (L/W/H): 2200x1350x1150 mm Weight: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1400x16502 mm Weight: 1800 kg Total power requirement: 8 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x2100x1300 mm Total power requirement: 1500 kW Weight: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year., Images shown might not reflect actual configuration.; Gross weight [kg]: 7436; Engine: Caterpillar C32; Accessories: Tanker, Control Panel, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000

Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor

Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020

incl. 20 m roller conveyor, brand Laeisz & Lüders, with new S7 control unit (Teyfel) from the year 2015, Process for Big Bag filling:, - You program the desired setpoint on the big-bag scale., - On the roller conveyor 3.1 empty pallets are placed on and moved over the button, Palette” acknowledged on an external control unit., - The empty pallet is driven onto the scale of the roller conveyor 3.2 and the BigBag scale is tared to zero, - An empty big bag must be hooked into the load hooks and the, Fill nozzle pulled over the puff hose on the fill pipe (external switch S6), Expansion hose., - The Start Big-Bag button starts the filling:, · The filling head moves to the top position, · The filling flap opens and the dosing chute feeds in the coarse/fine flow the, Target quantity in the big bag, · After reaching the fill level, the fill flap closes., · Open the load hooks and deflate  ...

Treif Dicer -Model: Raptor 150C -Power: 8 kW -Capacity: up to 4500 kg/h -Blade speed: 400 slices/min -Adjustable cutting length: 1-40 mm -Included knives: 7x7 mm, 9x9 mm, 24x24 mm -With loading for 200; meat bins -Weight: 1850 kg -Chamber dimensions: 620 x 150 x 150 mm -External dimensions: 4200 x 1250 x 2500 mm -Power supply: 400 V, 3-PE, 50 Hz -Machine made of stainless steel -Condition: used in very good condition, ready to work

turning diameter: 660/275 mm turning length: 1498 mm control: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVA weight of the machine ca.: 26,6 t dimensions of the machine ca.: 5301 x 2997 x 2788 mm 9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Island ...

Key data: 1500 kN, 40 mm

ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Dematic conveyor system Accumulating roller 15000-750-690 RA2458 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 15000 mm Condition: good (used) Roller width (RB): 690 mm Nominal/outer width (NB): 750 mm Accumulation slot size: 750 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.35 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side gui ...

Key data: 2000 kN, 291 g/PS, 45 mm

1.0 St. gebr. Rotary Table Injection Molding Machine Manufacturer: ARBURG Type: 1500T2000-800 Year of Make: 2012 Clamping force: 200 tons Rotary table; 2 x 180° Screws DN: 45 mm Max. displacement: 313 cm³ Moulded part weight: 291 g/hp Control: SELGOCIA Equipment: 1 x Core Pulls

General SKU235X167 LocationBarneveld CEcheck MakeBertoli Type150 NLB HA 33037 Pressure Working pressure250 Bar Main Features Capacity3100 Ltr./Hr. Motor37.5 KW Pressure250 Bar Specified Features - Piston homogeniser MaterialStainless steel 1.4462 (Duplex2205), Stainless steel 1.4542 (17-4 PH) Piston homogenisercheck Capacity3,1 m³/h Twin stagecheck Number of pistons:3 Piston diameter40 mm Piston stroke76.2 mm Piston stroke volume0,38l InletDN50 OutletDN50 Motor37,5 kW, 400 volt, With pumpcheck Capacity3000 l/h Motor2,2 kW, 400 volt, 220 rpm Information No.4979 Year of construction2022 With switchgearcheck Floorspace1,55x1,60 m Total height1,20 m Weight1300 kgPiston homogenisersBertoliMills > Piston homogenisersBrand > Bertoli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to ...

NAN-JHIEH NJ-150VM EPS/EPE styrofoam moulding machine was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is designed for the efficient production of various types of polystyrene parts, such as coffers, stucco, packaging inserts and food containers (lunchbox, thermobox, menubox etc.). The polystyrene is processed by means of special moulds that give the component the desired shape. These moulds are interchangeable so the machine can be adapted to different production profiles. A press force of up to 35 tonnes, combined with an extremely rigid design, ensure the achievement of high repeatability and quality of the components produced. The NAN-JHIEH NJ-150VM polystyrene moulding machine is currently configured for the production of expanded polystyrene (EPS) building blocks. Polystyrene building blocks are used in the building industry as lost formwork. Once a wall ...

This 3-axis Eumach LBM-1500 vertical machining center was manufactured in 2016. Consider the opportunity to buy this Eumach LBM-1500 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.

This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information.

This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information.

This Paul Reinhardt K34G / 1500 panel saw was manufactured in 1995. It features a multi-blade saw with a feeding and stacking system, ideal for efficient panel cutting operations. Contact us for more information.

This 5-axis INTOREX TKC-1500 CNC Wood Machining Centre was manufactured in 2025. It features a high-performance electrospindle with a 7.5 kW motor, achieving speeds up to 22,000 rpm. The machine includes a rotary tool magazine with 8 slots and an automatic feed unit for workpieces up to 1500 mm in length. Fully enclosed safety guards ensure compliance with EU standards. If you are looking to get high-quality woodworking capabilities, consider the INTOREX TKC-1500 machine we have for sale. Contact us for more information.

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

This Baykal BPH 1503 + Hypertherm HPR 130 Plasma Cutting machine Machine was manufactured in the year 2012 and has 18000 production hours. It is equipped with a Baykal control unit.

This injection moulding machine was manufactured in 2001. A robust Netstal SYNERGY 1500-600, it features a clamping force of 150 T and a screw diameter of 45 mm. It has been used for PP materials, ensuring reliability and efficiency with 56,000 production hours. A great opportunity to buy this Netstal SYNERGY 1500-600 injection moulding machine. Contact us for more information.

This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information.

Vertical Machining Cenre DUGARD EAGLE 1500

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

General SKU430W1392 MakeHermann Waldner LocationBarneveld CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity238 l. (150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft130-140 rpm Information No.5066 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight500 kg Extra Specifications- control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHermann Waldner ...

A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible.

Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filtertechnik Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction System / Filter System Air volume flow: 2000 m³/h Weight: 1000 kg Control: Herding MP 12 Filter cleaning: pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: available Number of units: 2

table diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.