cf 150 used for sale

: neu : 2026 : 070179 : prompt, Zwischenverkauf v : Türkei : 19900 € : 382.08 € : 1 : 150 to : fix : 300 mm : 610 mm : 1020 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2470 mm : 2450 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : fix : 1000 mm : 300 mm : 1020 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 8 mm : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2450 mm : 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm

workpiece diameter:63,5 mm centre distance:350 mm honing length max.: mm total power requirement: kW weight of the machine ca.:6 t dimensions of the machine ca.:2,70x2,30x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees + 30 / -30 Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees 0.001 Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm 0.001 tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recomme ...

pressure:150 t throat:400 mm stroke:30 - 150 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1000 x 750 mm hole in the table:320 x 200 mm table height over floor:800 mm ram surface:800 x 600 mm ram adjustment:85 mm weight:10,0 t Dimensions (WxDxH):1,4 x 2,2 x 3,1 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram counterbalance:pneumatic

pressure:150 t distance between columns:300 mm stroke:180 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:570x180 / 300x410 mm table height over floor:875 mm side window:180 mm ram surface:180 mm speed down:250 mm/s speed up:160 mm/s working speed:6 - 12 mm/s oil volume:250 l power requirement:11,0 kW weight:2,4 t dimensions (WxDxH):1,3 x 1,3 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally

General SKU327X695 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck 2x Capacity2x 150 l. Vessel sizesø 700 x 800 mm Top connectionsDN25, DN40 OutletDN25 Information TypeR409/454 No.M702-723865 Mounted on legscheck in frame Floorspace1,90 x 1,00 m Total height2,20 m Weight500 kg Extra SpecificationsQVF Glass Receiver System – 2 × 150 L Receiver Flasks with Coil Heat Exchanger (Condenser/Cooler)Vertical tanksNew arrivalsQVF GlasstechnikTanks > Vertical tanksNew arrivalsBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

General SKU309N500 MakeFalk gmbh & Co. KG No.3304 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4571 (316Ti) Cover materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell1 Bar Working pressure tubes4 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface150.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface150,5 m2 Tube capacity830 Ltr U-typecheck Number of tubes:157 Tube diameter25mm Tube length(2x)5900mm Wall thickness tubes2,0mm Max. temperature100 degr.C Shell capacity1530 Ltr Shell diameterdia.711mm Shell length6370mm Wall thickness shell5mm Max. temperature100 gr.C. Shell connectionsdn500, dn80 Cover connections(2x)dn200 Information Loca ...

General SKU084T495 MakeCollette TypeGRAL-150 Mach.No.77MG15005 Year of construction1978 Main Features MaterialStainless steel Volume150 Ltr. Motor15 KW Specified Features - Universal mixer Gral-granulator(1x) Capacity150 l Vessel sizesø 690 x 450mm, Vessel can be lifted hydr. With covercheck Pneumatic operated outletø 200mm With motor7,5/11,0 kW,(380 V (Ex)) Rotor speed150/225 rpm With lump breakercheck With motor3,0/4,0 kW, (380 V (Ex)) Rotor speed1500/3000 rpm With timercheck MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information LocationBarneveld With switchgearcheck Floorspace2,5 x 1,0 m Total height2,3 m ATEX compatiblecheck Extra Specifications- Air purged seals on mixer/chopper shafts Technical specs Extra informationVessel can be lifted hydr.Universal mixersDiscountColletteMixers > Universal mixersDiscountBrand > Collette What  ...

General SKU214W276 LocationBarneveld CEcheck MakeQVF Glasstechnik Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m2 Tube capacity10 Ltr. Number of tubes:37 Tube diameter14 mm Tube length1980 mm Max. temperature+150°C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN100 (2x) Cover connectionsDN40: DN50 Information TypeROB32/150/SH/3/SIC Year of construction1998 Floorspace0,25 x 2,30m Total height0,25 m Weight100 kg ATEX compatiblecheck Technical specs ...

General SKU135N667 MakeSussmeyer TypeHM 150 E.H.P. No.103780 Year of construction1990 LocationBarneveld Main Features MaterialMild steel Volume150 Ltr. Motor84 KW Specified Features - Sand mill MaterialMild steel Horizontal sand millcheck Capacity150 Ltr. Housing dimensions Dia. 420x1300mm With mechanical sealcheck With jacketcheck Motor84 KW, 380/660 Volt (Ex) With variable speed drivecheck Information Floorspace3,6x1,5 m Total height1,9 m Weight4250 kg ATEX compatiblecheckSand millsDiscountSussmeyerMills > Sand millsDiscountBrand > Sussmeyer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU214W144 MakeQVF Glasstechnik LocationBarneveld TypeROB 32/150/SH/3/SIC Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell2 Bar Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube diameter38,5 mm Tube length1980 mm Max. temperature150 °C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 Information No.98076 A Year of construction1998 Floorspace2,25x0,3 m Total height0,3 mFine chemicalsStarchOther chemicalRubberShell and tube heat exchangersBiotechnolo ...

General SKU214W147 MakeQVF Glasstechnik LocationBarneveld TypeROB 15/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell3 Bar Working pressure tubes2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)glass Tube (Material)Graphite Surface1.5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface1,5 m² Tube capacity11 Ltr. Number of tubes:37 Tube diameter14 mm Tube length1275 mm Max. temperature150 °C Shell capacity7 Ltr. Shell diameter130 mm Shell length1275 mm Max. temperature150 °C Shell connectionsDN80 (2x) Cover connectionsDN50, DN40 Information No.98083 A Year of construction1998 Floorspace1,3x0,3 m Total height0,5 m Weight90 kgFine chemicalsStarchOther chemicalRubberShell and tube heat exchangersBi ...

General SKU214W143 MakeQVF Glasstechnik LocationBarneveld TypeROB 32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube length1980 mm Max. temperature-50/150 °C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature-50/150 °C Shell connectionsDN150 (2x) Cover connectionsDN80, DN50 Information No.98079 Year of construction1998Fine chemicalsStarchOther chemicalRubberShell and tube heat exchangersBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillers ...

General SKU214W142 MakeQVF Glasstechnik LocationBarneveld TypeROB 32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube diameter14 mm Tube length1980 mm Max. temperature150 °C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 Information No.98081 A Year of construction1998 Floorspace0,3x2,25 m Total height0,3 m Technical specs Extra information- SIC better heat transfer coefficient than glas ...

General SKU251U349 MakeQVF Glasstechnik LocationBarneveld TypeROB32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube length1980 mm Max. temperature-50/150 °C Shell capacity24 Ltr. Shell diameterDN150 Shell length2250 mm Max. temperature-50/150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 Information No.98077 A Year of construction1998 Floorspace2,25x0,3 m Total height0,3 mFine chemicalsStarchOther chemicalRubberShell and tube heat exchangersBiotechnologyAgrochemicalsSp ...

General SKU251U350 LocationBarneveld MakeQVF Glasstechnik TypeROB32/150/SH/3/SIC Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface3,2 m² Tube capacity10 Ltr. Number of tubes:37 Tube length1980 mm Max. temperature-50/150 °C Shell capacity24 Ltr. Shell diameter167 mm Shell length2250 mm Max. temperature-50/150 °C Shell connectionsDN100 (2x) Cover connectionsDN50, DN40 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information No.98080 A Year of construction1998Fine chemicalsStarchOther chemicalRubberShell and tube heat exchangersBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & filler ...

General SKU234M150 MakeVan Beek Screwconveyor Systems Drunen TypeKR-150 No.250184 Year of construction1995 Mounted in framecheck Main Features Motor1.5 KW Length3500 mm Inlet diameter270 mm Specified Features - Vertical screw conveyor MaterialStainless steel 1.4552, Stainless steel Vertical conveyor screwcheck Trough-modelcheck Diameter270 mm Length4300 mm Between inlet and outlet3500 Shaft diameter70 mm Pitch50-130mm With hoppercheck (± 500 l) Inlet1200 x 270 mm Outlet± dia. 260x120mm (oval) Motor± 1,5 KW (motor tag is missing) Outlet height0.6 m With coverscheck Information LocationBarneveld With switchcheck Floorspace4,7 x 1,0 m Total height1,65 m Weight390 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsVertical screw conveyorsDetergent & surf.Other pha ...

Halbautomatische Kappsäge Fabr.: Salvador Typ: SUPERPUSH 150 Neumaschine Superpush 150 ist das Einstiegsmodel für den Holzzuschnitt mit Optimierungsfunktion. Die Maschine wurde als direkte technologische Weiterentwicklung der herkömmlichen Sägemethoden entwickelt und kann sowohl die Produktivität als auch die Holzausbeute steigern. ÄUSSERST ROBUST Die Struktur besteht aus dickem, verstärktem und lackiertem Stahl. Horizontale Auflagefläche mit beweglichem Schutz, damit das Werkstück leichter eingelegt werden kann. Schlitten mit Messanschlag und Schubfunktion. Lineareinheit mit Zahnriemen mit Stahleinlagen und Gleitschiene mit Linearlagern. Horizontale, durchgehende Werkstückablage mit einer Breite von 300 mm. TECHNOLOGISCH INNOVATIV Elektronisches System bestehend aus einem Touchscreen mit integrierter CNC. Software für Linux-Umgebung mit kundenspezifische ...

Product number: 3065 Type: UNIMIX 1500L Serial number: 62267 Year of construction: 2002 Mixer: 1500 litres, double shaft paddle mixer Infeed height: 1850 mm Outfeed: 800 mm, double tote bin Weighing cells: Flintec SB4-20kN GP-s Indicator: Bizerba Height open lid: 3500 mm Power: 3 x 400V, 50Hz, 11kW Dimensions: 2600 x 1700 x 2300 mm Machine on weighing cells Suitable for CO2 cooling

pressure: 150 t throat: 400 mm stroke: 400 mm dayligth: 600 mm table surface area: 1000 x 600 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: mm ram surface: 1000 x 600 mm working feed: 5 - 15 mm/sec speed down: 130 mm/sek speed up: 180 mm/sek power requirement: 18 kW weight of the machine ca.: 12,0 t dimensions: 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solu ...

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

CFS MultiFormer forming machine, type: MLF 400, serial number: 2190, year of constructoin: 2002, 3 x 380 V, 50 Hz, 7.86 kW, maximum: 50 strokes per minute, s/s mesh belt, belt width: 400 mm, hopper volume: 270 liter, weight: 1186 kg, total dimensions: 3000 mm x 1000 mm x 2600 mm. Including BDG400 bridge breaker and extra long outfeed conveyor of 900 mm.

WEG CFW700 Frequency Inverter This device is ideal for controlling electric motors and provides reliable performance for industrial applications. - Model: WEG CFW700 - Color: White and Blue - With display and control buttons - Robust design for use in demanding environments The frequency converter is in good, used condition. It shows the usual signs of use, but works perfectly.

Turbine Turbine mileage: 30,000 hours Counter-pressure turbine Manufacturer KKK Initial commissioning in 2002 Type: CFR5 G6a Power Max: 2500 kW Operating power: 2200 kW, Speed 23000 rpm, Fresh steam pressure: 65 bar, Fresh steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002, Total steam forming station renewed from 63 bar to 2.5 bar in 2002, El. Generator Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA renewed, Complete measuring, control, control technology of the turbine renewed, steam turbine renewed With Energy Installed boiler power Boiler I Coal Steam generation: 20 t/h, 63 bar, 495 C Boiler II Coal Steam generation: 13 t/h, 34 bar, 425 C Boiler III: Combined burner for oil and gas, steam generation: 20 t/h, 17 bar, 285 C General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic charcoal and  ...

Turbine Operating Hours of Turbine: 30.000h Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW, Revolution number: 23000 U /min, Live steam pressure: 65 bar, Live steam pressure temperature: 480 °C, Evaporation pressure: 1-17 bar, Investments in the year 2002 , Entire steam transforming station from 63 bar to 2,5 bar in the year 2002 renewed, El. Generator Fa. Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA, renewed, Entire measuring -, governing and control of the turbine renewed, Steam turbine renewed with Energy Production Installed boiler efficiency: Boiler I , Hard coal, Steam generation: 20 t/h, 63 bar, 495 °C Boiler II , Hard coalr Steam generation: 13 t/h, 34 bar, 425 °C Boiler III: , Combination burner for oil and gas, Steam generation: 20 t/h, 17 bar, 285 °C General overha ...

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with batter pump (2 pieces) outfeed belt outside dimensions (l x w x h) : ± 2.600 x 1.300 x 1.700 mm

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

CFS oil filter / oil filter CMF-56 380V 50 HZ 2kW. BJ. 2002

all stainless steel belt width 900 mm mobile adjustable speed dimensions (l x w x h) : ± 900 x 1.580 x 2.030 mm capacity : 380V, 50Hz, 5.62kW weight : 885 kg

mobile belt width 400 mm adjustable speed with press roller capacity : 3,95 kW with air knife dimensions (l x w x h) : ± 3.700 x 900 x 1.700 mm

. Retreat-holder for MULTIFIX - recording, size C . threaded steel holder and Knife 60 ° . Price: EUR 430,--+ VAT free within Germany .

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0406 Payload: 200 kg Load capacity platform pull-out: 100 kg Platform dimensions: 1.34 x 0.76 m Platform extendable + 0.55 m Transport dimensions 1.34 m x 0.785 m Height: 2.07 m Railings folded down Height: 1.67 m Weight approx.: 790 Kg Working height: 6.5 m Platform height: 4.5m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 120 Ah integrated charger 24 V/ 15 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform can be easily loaded and transported, can be easily transported with appropriate ramps with a car trailer or in a Sprinter or so. Other sizes with wheel and crawler drive available. For further dates or offers  ...

scissor lift; Terrain - Working platform with crawler chassis Type: CFPT0608LDN Payload: 230 kg Load capacity platform pull-out: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport dimensions 2.06 m x 0.99 m Height: 2,17m Railings folded down Height: 1.8 m Weight approx.: 1710 Kg Working height: 8.7 m Platform height: 6.7 m Gradeability up to: 25° Overload shutdown: Drive via battery 24 V / 300 Ah integrated charger 24 V/ 30 A German operating instructions included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with appropriate ramps with car trailer. Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquir ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0608 LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.28 m Handrails folded down Height:1.75 m Weight approx.: 2800 Kg Working height: 8 m Platform height: 6 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 10 / 12 / and 14m working height, with and without support. In addition, the machine is also available with bright non-marking chains. For further data please inquire. The machine can be viewed at our warehouse a ...

Scissor lift terrain - working platform with crawler chassis and automatic support. Type: CFPT 0810LDS Payload: 450 kg Load capacity platform pull-out: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport dimensions 2.78 m x 1.58 m Height: 2.40 m Handrails folded down Height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Gradeability up to: 30° Overload shutdown: Drive via battery 48 V / 210 Ah integrated charger 48 V/ 25 A German operating instructions included 2 years manufacturer's warranty The machine is also available with 8 / 12 / and 14m working height, with and without support. In addition, the machine is also available with normal black chains. For further data please inquire. The machine can be viewed at our warehouse and tes ...

Brand: CFT Model: TE Series Manufacture year: 2002 Production capacity: 15 tn per hour The series has been designed to improve the already superior performance of its predecessors, the MANZINI TE. 15 and TE.30. While preserving the important characteristics of its truncated cone-shaped screen, this new design permits a rapid changeover (without removing the paddles) because the narrow end of the conical screen is at the front of the unit, beneath the cover. The series of turboextractors has a peculiar characteristic: product emulsion due to air trapped within the product. In fact, the infeed of product is located on a completely closed cover and the centrifugal action of the paddles against the conical wall produces an impingement effect in the direction of product flow that helps pomace conveyance towards the expulsion channel. Turboextractors are specifically designed for e ...

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW

Turbine Turbine operating hours: 30,000h Backpressure turbine Manufacturer: Kkk First start-up: 2002 Type: CFR5 G6a Power max: 2500 kW Operating efficiency: 2200 kW, Number of revolutions: 23000 rpm, Live steam pressure: 65 bar, Live steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002 , Entire steam transformation station renewed from 63 bar to 2.5 bar in 2002, El. Generator Fa. Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA, renewed, complete measurement, control and control of the turbine renewed, steam turbine renewed with energy production General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic corder and ash removal system renewed, water treatment plant renewed, complete instrumentation renewed, flue gas cleaning plant Lurgie renewed from 1991 - 2001 Mistakes excepted!

Off-road scissor lift - work platform with crawler chassis and automatic support. Type: CFPT 0810LDS Load capacity: 450 kg Load capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.12 m Platform extendable + 0.9 m Transport Dimensions: 2.78 m x 1.58 m Height: 2.40 m Railing folded down height: 1.86 m Weight approx.: 2950 Kg Working height: 10 m Platform height: 8 m automatic levelling support Climbing ability up to: 30° Overload cut-off: Powered by battery 48 V / 210 Ah integrated charger 48 V/ 25 A German instruction manual included 2 years manufacturer's warranty This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing is carried out by .DLL Leasing. Further terms and details on request. The machine is also available with 8 / 12 / and 14m working h ...

scissor lift; Off-road platform with crawler chassis Type: CFPT0608LDN Load capacity: 230 kg Load capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Platform extendable + 0.90 m Transport Dimensions: 2.06 m x 0.99 m Height: 2,17m Railing folded down height: 1.8 m Weight approx.: 1710 Kg Working height: 8 m Platform height: 6 m Climbing ability up to: 25° Overload cut-off: Powered by battery 24 V / 300 Ah integrated charger 24 V/ 30 A German instruction manual included 2 years manufacturer's warranty Bright non-marking chains. Due to the compact design and the crawler chassis, the platform is easy to load and transport, can be easily transported with car trailer with appropriate ramps. This offer is a hire-purchase leasing offer through .DLL Leasing with a term of 36 months. Credit check and processing i ...

1300 KW KK&K CFR3 G5A tandem condensing steam turbine 40 bar inlet pressure from 1997 with 50.000 running hours in very good working condition for sale. Scope of supply: controlpannel, turbine with generator, documents. turbine: KK&K type: CFR3 G5A el. power: 1300 KW steam inlet pressure: 40 bar manufactured: 1997 generator: AEM type: SE 500 M4 powerrating: 1830 KVA volts: 400 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Product number: 1427B Type: BRN3000/500 Serial number: 517 Belt width: 500 mm Frying length: 3000 mm Heating: electric Power: 3 x 380V, 50Hz, 72kW Weight: 2500 kg Dimensions: 6300 x 1700 x 3100 mm Teflon infeed, hold down belt, circulation pump, oil level control, sediment removal, electric hoists, prepared for CO2 fire extinguisher Including separate infeed belt Machine delivered with CFS OT1750 oiltank and oilpump

all stainless steel suitable for thermal oil heating 209 kW suitable for fire protection with top hold down belt isolated canopy infeed belt oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with manual hoists dimensions (l x w x h) : ± 8.900 x 2.000 x 4.000 mm

all stainless steel electrically heated 85 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control Teflon-infeed oil circulation pump filter sediment removal system hoists fire protection total length ± 6.300 mm total width ± 1.500 mm total height ± 3.310 mm

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm