cf 150 used for sale

Ride-on - Sweeper & Suction Machine Manufacturer: Gansow Type: 150 P Year of manufacture: 1999 Operation 13.7.2000 Operating hours 280 h Drive: Petrol engine Broom drive: Hydraulic Special equipment: Panorama Cabin Location: Lower Saxony Price freely loaded from location.

Wire rope Tractel Tirak rope Ø 14 mm - 150 m on reel for grab hoist / winch Rope length 150 m. Diameter 14 mm (5x 26 PP). With drum reel 300 for max. 200 m. Quality features: galvanized steel cable, suitable for tirak tested, Packing with hook and tip.

turning speeds: 24000 U/min frequency: 0 Hz output: kw High Frequ. Grinding spindle, type: TSSV 150 - 15000/16, 16 kW,dia 150 x lgth 400,15.000rpm TSSV 150 - 15000/16, 16 kW,dia 150 x lgth 400,15.000rpm TSSV 150 - 24000/12, 12 kW,dia 150 x lgth 400,24.000rpm TSSV 150 - 24000/12, 12 kW,dia 150 x lgth 400,24.000rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KRAUSS MAFFEI 150 T type 150-520 C2 Force de fermeture : 150 T Année : 2003 31000 heures de fonctionnement Diamètre vis : 40 mm + 1 ensemble vis fourreau 50 mm Volume injectable : 217 cm3 / 340 cm3 Pression d’injection : 2377 bars Distance entre colonnes : 500 x 560 mm Dimensions des plateaux : 780 x 840 mm Epaisseur mini moule : 300 mm Course d'ouverture : 600 mm Interface euromap Noyaux hydrauliques Poids : 6 400 kg

A Koebau centerless cylindrical grinding machine is offered for the high-precision grinding of cylindrical workpieces. Main motor power: 18.5kW, min./max. grinding diameter: 2mm/100mm, max. workpiece length: approx. 600mm, grinding wheel dimensions X/Y: 600mm/200mm, regulating wheel dimensions X/Y: 300mm/200mm, grinding speed: 45m/s. The machine is equipped with a material feeding system, a singulation unit, a robust base frame and a stepped platform. Overall dimensions X/Y/Z: approx. 2500mm/2100mm/2200mm, weight: approx. 4200kg. An on-site inspection is possible.

The SIP 150-6 screw impeller pump is designed and built to meet the needs and demands of much of the world without the need for advanced technologies. This mobile pump unit is the simplest and most basic version in our range of 6″ screw impeller pumps., The Budget configuration is a typical old-fashioned mechanical configuration, has a direct-drive vacuum pump with V-belt without electromagnetic clutch, so the vacuum pump always works even if the screw pump has water., This configuration has no level control, and the speed must be adjusted manually via the throttle lever on the engine., This pump is as basic as you could want... Start/Stop with a switch and the RPM has to be adjusted manually. Equipped with float switching though !, However, the pump unit is completely autonomous and equipped with all the elements that Impulse always offers., It is equipped with its own fuel tank and o ...

workpiece weight: 150 kg workpiece length: 2500 mm diameter: 160 - mm balancing speed variable: 100 - 3000 U/min dia. axle journal: 160 - 350 mm voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 7,50 x 1,30 x 1,60 m Control: 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2.000 mm band speed: U/min motor: 400 V loading area: 450 x 160 mm total power requirement: 4,0 kW dimensions of the machine ca.: 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain turning speeds: 3150 U/min table surface area: 700x350 mm Table load: 400 kg spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solutio ...

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Additional Specifications: Ram (mm) 380 x 380 Ram Travel (mm) 500 Including: Vertical Head ISO 50 4-Axis D.R.O. Metallic Way Covers Pendant Control The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Tea ...

Table dimensions: . mm Motor output: 9 kW Spindle diameter: . mm reus: U/min Weight: kg Year: 0 9 kW, Diagram No.: 152.29.80.20, with control panel, control cabinet, plastic sideboard, operator mat, and hydraulic vice The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 580 mm main drive motor: 45 kW table surface area: 1600x2000 mm table load: 12,5 t Control: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kg total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x5x5x4 m Machine overhauled 2004 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact ...

spindle diameter: 150 mm x-travel: 4200 mm y-travel: 3000 mm dimension of the ram: 380x380 mm ram: horizontal adjustment: 500 mm spindle travel: 1200 mm Radial face slide diameter: 780 mm radial face slide travel: 250 mm rotary table:: Defum type: S-1600 Table dimensions: 1500x1500 mm table travel: 1100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serial no .: 6749, optional: floor plaates (Plattenfeld) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can fin ...

spindle diameter: 150 mm x-travel: 2005 mm y-travel: 1860 mm z-axis: 1620 mm w-axis: 706 mm control: Siemens 840 C SW5.1 turning speeds: 2500 U/min surface area: 2500 x 2000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK50 tool holder ontrolled axes Long angle head APFVL700 Length 569.34 mm Max. 1200 rpm SK 50 mount Short angle head APFVL700 Length 268.6 mm Max. 1200 rpm SK 50 mount Rapid traverse in x 6 m/min Rapid traverse in y/z 10 m/min Rapid traverse in B 150°/min Feed rate x - 0.001 - 10 m/min Feed rate in y/z 0.001 - 6 m/min Feed rate in B 0.001 - 150°/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, ...

spindle diameter: 150 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 1000 mm w-travel: 1500 mm Table area: 2000x2000 mm Table load: 30 t Feed: 3-3500 mm/min Rapid movement: 5000 mm/min transmission ratio: 2 spindle power: 37 kW total power requirement: kW voltage: 380 V frequency: 50 Hz Control: Heidenhain type: ITNC mm weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. W ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : 1000 mm : 300 mm : 11 kW : 2110 mm : 1000 mm : 2450 mm : 2400 kg : 1 : 610 mm : 1020 mm : 5 mm/s : 10 mm/s : 8 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : fix : 1520 mm : 300 mm : 1520 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 10 mm : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2450 mm : 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heidenhain iTNC530Indramat10,000 mm1,500 mm2,500 mm0.001 mm20,000 NX 20,000 mm/min, Y 20,000 mm/min, Z 20,000 mm/min (16,000 mm/min at 2,500 mm Z stroke)20 micrometres (X over 2,000 mm; Y; Z)10 micrometres (X over 2,000 mm; Y; Z)CES rotary table 2,000 x 2,500 mm, max. load 20,000 kgISO 50 (CSN 22 0433 / DIN 2079-CC)20 - 4,000 rpm, continuous30 / 37 kW1,000 NmVK 4000 universal, VA2 4000 straight, VP2 4000 angular - all after overhaulChain type (Q) - R 40, 40 toolsDia. 130 mm adjacent / 250 mm with one free position; weight 25 kg; length 340 (unit given as kg in the offer, apparently mm)CTC max 80 s / CTC min 30 s50 kVA3 x 400 V, 50 Hz6 barLpA 80 dB, LWA 99 dBChain type chip conveyors with one chip containerCooling unit for thermal stabilization of the spindle head driveProtective fence with electric locking, protective cover of working area, stable operator platformNew wiring; new bearing ...

CONTROLS   CNC controls FANUC BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1   number of b-axes: 1 WORKING RANGE TURNING   bar diameter (max): 50 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 11 kW   spindle bore diameter: 50 mm   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 5000 /min   drive power: 7.5 kW   c-axis: yes   Z-axis travel: 465 mm X/Z SLIDE   tool fixture: Turret   number of tool positions (total): 24   number of live positions: 24   - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4500 mm   space requirements -front/back-: 2200 mm   total height: 1900 mm   total weight approx.: 5500 kg ATTA ...

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity., The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

: neu : 2024 : 7321 : prompt, Zwischenverkauf v : Türkei : 12500 € : 216.96 € : 1 : 11300 € : 150 to : horizontal verschiebbar : 300 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2630 mm : 1000 mm : 2480 mm : 2100 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal machine Manufacturer : Stephan Type: KG 150 Technical specifications : The machine is suitable for slicing, grating, grating, shredding, straining and whipping Hourly output 300 – 800 kg/h Agitator with 2 speeds 142/284 rpm Stainless Steel

Offered for sale is a WaldrichSiegen CNC portal milling machine for horizontal and vertical milling as well as drilling of large workpieces. Table travel: 14000mm, crossrail saddle travel: 4500mm, crossrail travel: 4000mm, quill travel: 450mm, positioning accuracy of table/crossrail saddle/crossrail/quill: 0.05mm, distance between columns: 4545mm, distance from table to spindle: 4000mm, table size/clamping surface X/Y: 14000mm/4350mm, main spindle motor power: 125kW, main spindle tool interface: ISO SK60, max. table load: 200t, max. point load: 10000kg, control: Siemens 840D, measuring systems: Heidenhain, axis drives: Siemens/Dornhoff. Including an angle-adjustable universal milling head, angle milling heads with installation heights of 800mm/850mm/1400mm, a 1400mm work spindle extension, adapter plates for the work spindle with 400mm/220mm and chip conveyors on the left/right below flo ...

Key data: 500 mm, 500 mm, 6000 1/min

Manufacturer: GOODWAY Model No.: GLS-150 Year: 2006 Condition: Used Stock number: 9393 Control System: FANUC Series Oi-TC Maximum turning length: 500 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 6000 1/min Travel X: 210 mm Travel Z: 520 mm Weight: 3200 kg Chip conveyor

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 € : 825.12 € : 150 to : 500 mm : 800x600 mm : 630 mm : 22 mm/s : 3 mm/s : 4 kW : 1800 mm : 1200 mm : 2400 mm : 4500 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 € : 982.8 € : 150 to : fix : 1250 mm : 500 mm : 700 mm : 1500 mm : 20 mm/s : 10 mm/s : 3 mm/s : 1200x700 mm : 1250x400 mm : 2400 mm : 1200 mm : 2800 mm : 5200 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

Manufacturer: Indunorm Year of Manufacture: 2015 Model: Indumatik MZA-006 Type of Machine: Linear Pallet Handling System Technical Specifications: - Control: induCell - Power Consumption: 3 kVA - Current: 5A - Power Supply: 400V AC - Compressed Air Connection: Greater than 6 bar - Machine Weight: 1,600 kg - Dimensions: Approximately 6,100mm x 3,510mm - Axes: 5 axes total. X-axis, Y-axis, Z-axis and C-axis active. A-axis and B-axis not present. - Cooling System: None - Pallet Spaces: 32 - Pallet Size: 500 x 500mm - Handling Weight: 150 kg - Pallet Change: Yes - Operating Hours: No operating hour counter installed - Scope of Delivery: Complete handling system - Note: This system was previously operated with a DMG MORI DMU50. The DMU50 is not included in this sale. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Content: 150 litres Double jacket for cooling/heating Max Temperature: 160°C Drive motor: 15 KW Hydraulic power unit: 1.5 KW Tilting mixing trough for easy emptying Product contact area in stainless steel (all internal parts with product contact)

Displacement -150 liters Set – with electrical panel and fittings Capacity – (720g) – 110 pcs. Telugu Electric power – 20 kW Diameter – D 600 mm. Height – H 1225 mm.

General SKU291Y525 LocationBarneveld MakeFryma Koruma TypeMZM 150 No.M 10027 Pressure Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor15 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity150 l. Vessel sizesDia. 780x850 mm Conical bottomcheck Flat top sidecheck With covercheck Top connectionscheck OutletDia. 50 mm and Dia. 25 mm (2x) With jacket30 l. With anchor stirrercheck Motor1,5 kW, 380 V, 1420 rpm. Speed mixing shaft20 rpm With homogenisercheck Motor15 kw, 380 V, 2920 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General Year of construction1980 Floorspace1x1,75 m Total height2,15 m Weight750 kg Extra SpecificationsHomogenisering with conical rotor. Dia. : 190x80 mm with 5 mm grooveswith vacuüm pump, Lohe 25003Generic medicinesOintmentsBiotechnolog ...

General SKU298Y570 MakeBaumgartner Serial393 Specified Features - Pressure vessel Material finishMirror polished inside Pressure Working pressure2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume223 Ltr. Pressure2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity150 l. (223 l.) Vessel sizesø 700 x 750 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN40 Max. temperature110 °C MaterialStainless steel 1.4435 (316L) General Type150 L Year of construction2002 Mounted on legscheck LocationBarneveld Floorspace0,80 x 0,80 m Total height1,65 m Weight200 kg CEcheckGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIPressure vesselsBaumgartnerIndustries > Pharmaceutical > Generic medicinesI ...

General SKU298Y571 MakeBaumgartner &: Co Serial392 Pressure Working pressure2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume150 Ltr. Pressure2 Bar Specified Features - Pressure vessel Capacity150 l. (223 l.) Vessel sizesø 700 x 750 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN40 Max. temperature110 °C MaterialStainless steel 1.4435 (316L) General Type150 l Year of construction2002 Mounted on legscheck LocationBarneveld Floorspace0,80 x 0,80 m Total height1,75 m Weight200 kg CEcheck Extra Specifications3 cover screws missingGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIPressure vesselsBaumgartnerIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsInd ...

Briquetting press Type: BrikStar 150–19 Manufacturer: BRIKLIS Year: 2023 Intended for medium-sized operations, which presses wood waste, straw, hay, paper and other materials into briquettes with a diameter of 65 mm, while offering an output of 130-160 kg/hour (depending on the material) at an input of 13.5 kW, while the version with a hopper of 3 m³ (type 19) weighs around 1340 kg and is equipped with automatic regulation. parameters: Output: 130–160 kg/hour (depends on the processed material) Diameter of briquettes: 65 mm Electrical input: 13.5 kW Suitable materials: Wood dust, sawdust, straw, hay, paper, sedge, poppies, energy plants. Operation: Medium operations, single-shift and multi-shift. Features: Hydraulic press, modern management, automatic quality control, sensor min. levels, possibility of adjustments. Type 19: The designation 19 refers to the version with  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 28450 € : 543.4 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone leng ...

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...

width of the strips: 150 mm band length: 2000 mm revolutions per minute: 3000 U/min engine output: 4.0 kW weight: 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 € : 1631.07 € : 150 to : 300 mm : 950x650 mm : 1200x750 mm : 550 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3250 mm : 8200 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 71000 € : 1341.9 € : 150 to : 300 mm : 750x500 mm : 1000x700 mm : 500 mm : 10 mm/s : 3,5 mm/s : 22 mm/s : 7.5 kW : 2300 mm : 1400 mm : 2750 mm : 7700 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15500 € : 297.6 € : 150 to : horizontal verschiebbar : 300 mm : 750 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2560 mm : 1000 mm : 2480 mm : 2350 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 € : 1260.63 € : 150 to : 500 mm : 1.550 x 2.000 mm : 800 mm : 20 mm/s : 3 mm/s : 2350 mm : 2000 mm : 2500 mm : 4100 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 75000 € : 1417.5 € : 150 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 3 mm/s : 2900 mm : 2500 mm : 2500 mm : 5200 kg : horizontal verschiebbar : 2050 mm : 1400 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...

: neu : 2024 : 5546 : prompt, Zwischenverkauf v : Polen : 1730 € : 1 : 150 mm : 2.000 x 150 mm : 200 x 150 x 42 ø mm : 605 mm : 3000 1/min : 3.5 kW : 1025 mm : 600 mm : 1000 mm : 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

work table:: 290x130 mm table - tiltable +/-: 15 ° cross adjustment: grinding wheel diameter: 150 mm turning speeds:: 1 dimensions of the machine ca.: 780X630X1100 mmxmmxmm weight of the machine ca.: 185 kg coolant: komplett The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 38 kW degree: 500 Grad weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sek. total power requirement: 3 kW weight of the machine ca.: 95 kg turning speeds: 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Control: Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 16,5/33 m/sec total power requirement: 2,6/3,37 kW turning speeds: 1400/2800 U/min weight of the machine ca.: 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.