cf 150 used for sale

width of the strips: 150 mm band length: 2000 mm band speed: 14,5 / 29 m/sec grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4,0 kW 100% ED weight: 84,0 kg range L-W-H: 1.080x520x1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Pan working capacity: 150 Kg. Pan speed: 5 - 15 RPM Pan outside diameter: 48" (1219.2 mm) Pan mouth diameter: 19" (482.6 mm) Base construction: Stainless steel Drive motor: 2 hp 1440 RPM Height: 75" (1917.2 mm) Floor space: 61" x 50" (1548.9 x 1270 mm) Weight: 1550 lb (700 Kg) Advanced Specifications flow tab system: A key feature of the Flowtab system is the unique spraygun, designed by BWI Manesty to improve coating efficiency, reduce operational downtime; and simplify cleaning. The automatic clean-out facility prevents fluid blockages within the nozzle, even during extended production cycles; Even at low atomising pressures, the spray rate and pump speed of the Flowtab can be controlled manually via the portable console or, automatically, from the ACS control console, without adjusting the sprayguns. Noted for their ability to deliver fast, flexible a ...

width of the strips: 150 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4,0 kW 100% ED weight of the machine ca.: 84,0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

coolant capacity: 30 l/min Capacity: 70 Watt conveying height: 4 m voltage: 230 V Suction depth: 150 mm Submersible pump in various depths Of 85, 120, 150, 180, 200, 250, 300 mm Option: You can also get the PA 35 with 230 V (PA 35 M) operating voltage, The loss of performance is then about 10%. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 30 m/min : 200 x 150 x42 mm : 605 mm : 630 m³h total power requirement: 4,8 PS weight of the machine ca.: 100 kg dimensions of the machine ca.: 1025 x 600 x 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alpha AL 150 laser welding machine Machine is in good working condition Wattage 150 w

width of the strips: 150 mm band length: 2000 mm band speed: 2800 - 3300 m/sec : 200 x 150 x 42 mm grinding head for face-and peripheral grind.: 477 mm total power requirement: 7,5 PS weight of the machine ca.: 90 kg dimensions of the machine ca.: 1965 x 605 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KrausMaffei-150 clamping force 1500 fixation plate size 720x710 distance between bars 500x450 mold height 300 opening stroke 600 coupling pin pneu ejector 250 ejector stroke 150 screw 50 disponible from September 2021

Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm

Drive motor for spiral kneader Kemper SP 150 AL -Motor for kneading spiral of spiral kneader Kemper SP 150 AL

Kemper vat wagon with boiler Kneading boiler vat for Kemper spiral kneader SP 150 AL Stainless steel boilers with handle for a maximum of 150 kg flour for max. 240 kg dough Stock: 12 pieces

Sisma SWA 150 Welding Machine 150 WATT Machine is in very good condition Maintenance has been done regularly

Motor for Spiral Kneader Kemper SP 150 ExtendableUnused Motor for Spiral Kneader Kemper SP 150 ExtendableWe have 2 pieces in stockDetails see picture

Romaco Promatic 150 Cartoner Horizontal intermittent motion type, model Promatic 150 W/LAETUS SYSTEM, MODEL ARGUS

Spiral kneaded Kemper SP 150 AL Bakery dough kneading machine spiral kneader Kemper SP 150 AL with 2 stainless steel boilers functionally tested and cleaned immediately available in stock for sale. The machine is automatic with 2 speeds and time wasured.Kesse and mixing tool are made of stainless steel. -with automatic boiler locking -2 automatic timers -2 speeds -for max. 150kg flour / max. 240kg dough -with flour dust cover -with 2 boilers -Stainless steel boiler and spiral -380 Volt 50Hz

3 x Diverter ZWR-150-AS/AS-H0/R2-D-S Distribution or collection element in pneumatic conveyor systems for powdered and granular Products from a wide range of industrial sectors. Factory No. / Item no. /Drive end: 92576 / -- / R 92577 / -- / R 92578 / -- / R GENERAL DATA Product: Li2Co3; LiOH Powder Bulk density: 380.0 kg/m3 Bulk density: 900.0 kg/m3 Grain size distribution: 0.050 mm Grain size distribution: 0.400 mm Product temp. min.: 10.0 °C Product temp. max.: 35.0 °C Ambient temp. min.: 10.0 °C Ambient temp. max.: 35.0 °C Discharge pressure: 0.00 bar (g) Explosion protection: According to customer specifications, no explosion protection provided Design data Max. operating pressure: 6.00 bar (g) Compressed air supply: 4.50 bar MATERIALS / DESIGN Execution: Distribution Housing: Cast aluminium EN AC-42100 (A375.0) with replaceable stainless steel in ...

Lifting tipper Kemper HK 150 -for boiler spiral kneader Kemper SP 150 A and AL -Load capacity 1000kg -Height 204 cm -Tipping height 190cm -can be driven on castors

This is a 150 LITER boiling kettle from the premium manufacturer MKN, type Optima 850. The device is from 2006 and in a top maintained condition. The boiler is a double-jacketed boiler with a separate, integrated and low-maintenance VAPRO steam generator system for fast heat-up times and low energy and water consumption as well as high efficiency. Thanks to the VAPRO rapid steam system, you have short boiling times. In addition, the device has automatic process water monitoring and replenishment, which means that it is always ready for operation. The device has undergone a major inspection in our in-house workshop and is fully functional. The price quoted is net plus 19% VAT. Our used equipment service for you: • 3 months warranty on all electrical parts • High-quality brand-name appliances at fair prices • Professional overhaul / inspection & expert cleaning • Tested  ...

Pen machine Saomad UTP 150/6 Year of construction 1996 18kW 400V 1st spindle: Saw blade Spindle diameter 30mm 3kW motor 3000 rpm Cutting diameter 400 mm Cutting height 125mm Horizontal set 150mm 2nd/3rd spindle: Planer heads Spindle diameter 40mm 2,2kW Adjustable horizontal lower 50 mm Adjustable horizontal upper 75 mm 5000 rpm Planing head 160 mm Planer head length 150 mm Maximum gap between planer heads 185 mm 4th unit: Shaft, milling Spindle diameter 40mm 5.5kW Length 150mm

min. dia.: 0,1 mm max. diameter: 150 mm dimensions: 300 x 150 x 200 mm weight: 4,0 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engel Victory 200/50 Focus (150) without funnel General information Item number: 150 Availability: In stock Year of construction: 2007 Brand: Engel Specifications Spray weight: 89 g Clamping force: 500 kN Screw diameter: 30 mm Spray pressure: 1451(2205) bar Spar spacing: Tie barless Clamping plate size: 450 x 500 mm Control: EC 200 Language: German Power: 31 kW Operating hours: 79044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m Funnel: No Core train: Yes

Vertical slotting machine make BEHR type ST 150Machine -No: 096, built in 1955Technical specifications:large stroke: 150/175 mmSlide adjustment: 150 mmInclination of the ram in both directions: 5/8 degreeProjection: 450 mmHeight of table / UK ram guide: 260 mmRound table diameter: 340 mmLongitudinal displacement of the table: 320 mm3 lifting speeds: 17/54/108 H / min.large groove width: 16/26 mmWeight approx: 1000 kgExternal dimensions approx .: 960 x 1530 x 2030 mmWith- Feeds in X and Y (forwards and backwards) Adjustable speed- Adjustment of the rotary table manually- without the chuckused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Walde ...

Vertical machining center make SIGMA type EK 150 PYear 1989 with table pallet changerCross table travel X: 1500 mmTable longitudinal travel Y: 800 mmSpindle perpendicular Z: 750 mmTable surface: 1900 x 750 mmMax. Table load: 3.5 tSpindle mount: ISA 50Spindle speeds: 20 - 4000 rpm.Max. Drilling capacity: 60 mmThread cutting capacity: M 48Milling capacity: 450 cm³ / min.Working feed: 0 - 10000 mm / min.Rapid feed: 15000 mm / min.Distance spindle axis / guides: 890 mmDistance spindle / table min./max.:150 / 900 mmDrive power: 26 kWWeight approx: 16 tOutside dimensions approx: 3710 x 4100 x 3520 mmWith- Tool changer with 40 tool placesxa0xa0xa0Max. Tool diameter 120/200 mmxa0xa0xa0Max. Tool length 400 mmxa0xa0xa0Max. Weight of each tool 20 kgxa0xa0xa0Tool change time 5,0 sec.xa0xa0xa0Span to Span time 11 sec.- 2 workpiece changing tablesxa0xa0xa0Max. Load of pallet 2.5 txa0xa0xa0Pallet chan ...

One-sided centering machine make Gebr. HELLERTechnical specifications:Shaft diameter up to: 150 mm:Center height: 150 mmBed length: 800 mmDrive power motor: 1.1 kWExternal dimensions L x W x H: 1300 x 900 x 1200 mmWeight approx: 200 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic press brake make LOTZE type P 150/35Machine -No: 4850 built in 1966 completely overhauled in 1988Technical specifications:Printing capacity: 150 tWorking length: 3500 mmDimensions approx: 4000 x 1700 x 2500 mmWeight approx: 16 tWith- Upper and lower tool- pneumat. Back gaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Reepack Reeflex 150 Ecoline tray sealer Manufacturer: Reepack srl, Italy Type: ReeFlex 150 Ecoline Year: 2011 Stainless steel Mold: baguette format, 300 mm x 85 mm, 3 times Speed: 6 – 15 / min. Power: 400 v., 50/60Hz, 3-phase Weight: 1000 kg Dimensions: L 4060 mm x W 1300 mm x H 1820 mm

Used ground paver Manufacturer: Hess Type: BF 150 A Year of construction: 1985 Power: 19 KW Block making machine Manufacturer: Hess Type: BF 150 A Year of production: 1985 Power: 19 KW

Machine type welding rotary table Brand MERKLE Type D 150 touch Supply voltage 1 x 230 V Speed range 0.05 – 10 rpm, infinitely variable Speed control 1 : 200 Torque 15 – 50 Nm Face plate diameter 400 mm Face plates - inner passage 60 mm Tilt angle of the face plate 135° Vertical load capacity 150 kg/1.5 kN Table height 750 mm Tilting movement manual, clampable and snap-in Tipping torque 130 Nm Pantograph 400 A at 80 % ED Connection for - foot switch single or double - Handheld remote control - Foot remote control Age 6 months Condition as good as new Weight 65 kg Warranty 24 months from date of delivery List factory price ex stock 3.550,00 € + VAT incl. surcharges Price kpl. ex warehouse Munich 2.890,00 € + VAT Foot switch simple with 3 mtr. cable 225,00 € + VAT 019.0.2900 Foot switch double with 3 mtr.  ...

Used Extendable Boiler for W&, P DK 150 Stainless Steel? Product? Manufacturer: Werner & Pfleiderer? Type: DK 150? Condition: used, baker's condition - needs to be thoroughly cleaned before use? The boiler is integrated on a trolley? The car is easy to drive and rotate? The boiler can be turned in all directions on the trolley? Material trolley: metal? Material shell: stainless steel? for max. 240 kg of dough? Inside of the kettle: 98 cm, 56 cm deep? Outside of the cauldron: 104 cm, 103 cm high? Stock: 8 pieces

Industrial robots Brand: Kuka Model: KR 150-2 Series: 2000 Year of construction: 2007 Nominal payload: 150 kg Reach : 2700 mm Number of axles: 6

used injection moulding machine 2-colours 2-K (45° arrangement of the 2nd unit) from clean room production Manufacturer: Arburg Type: 570C 2000-350/150 Control Selogica year of construction: 2007 Extras / Special features - Robot interface - 4x core pull - Technology level 2 and 3 (3 control pumps) - screw and barrel highly wear resistant - open nozzle - position controlled screw - Accumulator system f. fast injection - hydraulic accumulator - injection pressure increased for 2nd unit - Extension of tie bars of min. mold installation height to 500 mm Opening stroke unchanged - cores freely programmable - blow-out device - Interface for temperature control units - Control extension f. special signals - Interface coloring ( unit 1 u. 2 ) - interface vacuum valve B797ctcwes - additional heating control circuits for nozzle and nozzle tip - 12 electrical he ...

Robot KAWASAKI UX 150 F Year of construction: 1999 Control: CNC 6-axis Max Arm Range: 2 531 mm Max payload: 150 kg Country of origin: Japan

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31400 € : 634.28 € : 1550 mm : 6 mm : 6 mm : 4 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 3750 mm : 880 mm : 1100 mm : 2400 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 707 € : 2050 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created w ...

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

Mechanical NC machine vice GERARDI precision machine vice, clamp jaw width 150 mm jaw height 40 mm wingspan 0 to 200 mm clamping pressure approx. 3 ton. Guideway height 50 mm Guideway length 420 mm- Mechanical machine vice - Quick adjustment with clamping ball lock - Clamping range via trapezoidal spindle approx. 60 mm- Stable base body ground on all sides- Horizontal, vertical or laterally clampable - Guideway with 14 and 16 mm Guide groove Dimensions L x W x H 420 x 150 x 100 mm Weight: 27 kg very good condition; used

MOBILE MIXER-MINCER, WOLFKING TYPE: SFG 150/100 + PORTIONER TYPE: PD200 Technical description: Material: Stainless Steel Mixer, type: SFG 150/100 Serial number: 59440, year: 1998 Power supply: 380 V, 50 Hz, 7.8 / 9 A, 3.7 / 4.4 kW Weight: 350 kg Outlet diameter: ?100 mm Mixer mill size: 1310 x 600 x 1500 mm Foot control Portioner, type: PD 200 Serial number: 59441, year: 1998 Power supply: 220 V, 50 Hz, 0,4 A, 35 kW Weight: 100 kg Band width: 200 mm Working width: 180 mm Dimensions: 1300 x 600 x 1140 mm

High precision tower SCHAUBLIN type 150 TECHNICAL SPECIFICATIONS: Year: 1998 Number of axes: 2 X-axis stroke: 180 [mm] Z-axis stroke: 600 [mm] Z-axis fast forward speed: 4000 [mm/min] Tip distance: 600 [mm] Peak height: 150 [mm] Diameter allowed above the bench: 340 [mm] Permissible diameter above trolley: 177 [mm] Spindle nose: CAMLOCK D 1-4'' Inner pin cone: CM5 Spindle for clamping pliers: B32 Spindle passage diameter: 40 [mm] Mini speed. Pin: 55 [rpm] Maximum speed. Pin: 3000 [rpm] Pin power: 4 [kW] Cone: CM5 Metric pitch range: 0.25 - 14 [mm] English pitch range: 112 - 1/2" [nets/inch] Modular pitches: 0.12 - 7.5 [modules] Watering tray capacity: 29 [l] Installed capacity: 6 [kVA] Supply voltage: 400 [V] Dimensions: 1730 x 970 x 1300 [mm] Weight: 1250 [kg] EQUIPMENT INCLUDED: x1 visualization HEIDENHAIN type ND780 (2 axes) x44 SCHAUBLIN B32 clamp ...

Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm

Industrial robot KUKA KR 150-2 Series 2000 6-axis robot Control KRC 2 with cable set and hand-held control unit Load capacity 150 kg 200mm arm extension Connecting cable 8m Dimensions: L 1300mm, W 3000mm, H, 2500 Weight: approx. 1300 kg Power supply: 400V, 50Hz, max. 7kW The gripper shown is not included in the scope of delivery Subject to errors, changes and prior sale

- Separator WESTFALIA SAMP 150 36 - Year of construction: 1965 - Motor: 22 Kw 380/400V/50Hz - New fully automatic control: Year 2013 original Westfalia - Output: fruit juice/wine up to 10'000l/h - Max. Water output: 20000 l/h - With rotary brush sieve - Machines in very good condition, very few working hours - Overhauled machines - Separator WESTFALIA SAMP 150 36 - Year of construction: 1968 - Motor: 22 Kw 380/400V/50Hz - New fully automatic control: Year 2013 original Westfalia - Output: fruit juice/wine up to 10'000l/h - Max. Water output: 20000 l/h - With rotary brush sieve - Machines in very good condition, very few working hours! - Overhauled machines

thickness of jaw: 150 / 160 / 200 mm max. clamping width: 105 / 138 / 275 mm ca. high of jaw: 46 / 63 mm New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 780, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 220S 150-60 Clamping force: 15 t Production year: 1999 Injection weight: 14 (PS) g Injection unit: .../60 Screw diameter: 15 mm Specific injection pressure: 2330 bar Injection volume: 15 ccm Injection weight: 14 (PS) g Pump motor power: 5.5 kW Tool closure system: 150/... Clamping force: 15 t Distance between columns: 220 x 220 mm Opening distance: 275 mm Maximum plate distance: 425mm General data: Total installed power: 11 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other peripherals and injection machines. www.europnet.eu

Labeller Manafacture: Weber Alpha Compact Type 150-30-LH Year of construction 08/2018 suitable for self-adhesive labels Label width min. 10 mm – max. 150 mm Label length min. 20 mm – max. 300 mm Label roll outside diameter 300 mm Sleeve core diameter 76 mm Includes tripod mobile

Tumbler Ruhle with cooling Model: MKR 150 Volume: 150 liters Dimensions: 120x100x135cm Electrical power: 3kW

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Stamp: for Herrenknecht tunneling -Piston diameter: approx. 150 mm -Piston rod: Ø 110 mm -Stroke: 700 mm -Applicable: universal -Number: 2x cylinders available -Price: per piece -Dimensions: 950 x 300 mm -Weight: 150 kg/piece

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, band saw machine, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x.150 mm -Cutting data round: mm -Cutting data square: 150 mm -Saw band speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant device -Dimensions: 1800/940/H1310 mm -Weight: 528 kg