centrifugal used for sale

Centrifugal pump, single-stage LOWARA CEA120/5/C 104290040 Q: 60 - 160 l/min H:28.2 - 17.3 m Hmin: 17.3 m Motor: SM80BG/311HE 1.1 KW 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 Pump Foot: 195 / 175 x 183 mm hole spacing: 128 / 150 mm 4x Bore: Ø 11 mm pump material: stainless steel used, tested ! Dimensions (pump): 420 x 220 x 240 mm

Centrifugal pump, single-stage LOWARA CEA120/5/A 104480040 Q: 60 - 160 l/min H: 28,2 - 17.3 m Hmin: 17.3 m Motor: 1.32 KW 220 - 240 / 380 - 415 V 3AC 50 Hz IP55 Suction Side: 1 1/4 ( inch) ) Print Side: 1 ( inch ) Pump material: stainless steel control box is damaged ! used, tested ! Dimensions (pump): 335 x 215 x 225 mm

Description: • Centrifugal extraction fan • Serial number 22 • Motor power 55 KW-1475 rpm • Fan diameter approx. 700 mm • Belt drive • Input pipe diameter approx. 700 mm • Output pipe diameter approx. 650 mm Approx. Onsite Dimension. (l x w x h): 2,550 x 1,740 x 2,050 mm, weight approx.: 900 kg

Description: • Centrifugal extraction fan • Serial number 1046 • Motor power 75 KW-1475 rpm • Fan diameter approx. 1200 mm • Belt drive • Input pipe diameter approx. 800 mm • Output pipe diameter approx. 750 mm Approx. Onsite Dimension. (l x w x h): 3,100 x 2,000 x 2,250 mm, weight approx.: 1,100 kg

Description: • Centrifugal extraction fan • Serial number 308 • Motor power 37 KW-1475 rpm • Fan diameter approx. 1000 mm • Belt drive • Input pipe diameter approx. 650 mm • Output pipe diameter approx. 550 mm Approx. Onsite Dimension. (l x w x h): 2,530 x 1,550 x 1,850 mm, weight approx.: 700 kg

Description: • Centrifugal extraction fan • Motor power 15 KW-2940 rpm • Fan diameter approx. 500 mm • Belt drive • Input pipe diameter approx. 300 mm • Output pipe diameter approx. 300 mm Approx. Onsite Dimension. (l x w x h): 1,470 x 1,080 x 1,420 mm, weight approx.: 320 kg

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Kat-No 08-1514 in very good condition - checked! Pump diagnostics: Pressure test: 4 bar Suction capacity up to -1.5 bar: -0.5 Conveyor pressure: 3 bar Power: 23,500 liters/h Ampere min/max: 3.8 Other pump types or our complete range (tanks, pumps, filters, beverage technology) on request! For questions call 09353 909050 or 0171 651 8248 Fax: 09353 9090522 All prices are ex works, plus Vat Intermediate sale reserved. Freight cost share: by scope of delivery Sightseeing is also possible on weekends or evenings by appointment.

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

; NEW

Kat-No 08-1632 in very good condition HxLxW: 56x78x30 cm For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 All prices are ex works plus law VAT Intermediate sale reserved Freight cost share: by scope of delivery Delivery time: immediately from stock Sightseeing is also possible in the evening or on weekends by appointment.

Cat. No. 07-1260 in very good condition Capacity: 35 cubic meters/h at 6.3 bar = 63 m water column Dimensions: Length: 120 cm Width: 48 cm Height: 48 cm Pump diagnostics: Pressure test: 4 bar Suction capacity: - 1.5 bar to -0.1 bar Pressure: 5.1 bar Power: 370 l/min., 22200 l/h Ampere min./max.: 16.5 6 bar DN 65 15 kW For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 12-1075 in very good condition New price: 2000€ Dimensions and weight: LxWxH: 70 x 48 x 103 cm Weight: 38 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat-Nr. 12-1065 in a very good condition Capacity: 10 bar Original Price: Euro 3000,- Measurements and Weight: LxWxH: 84 x 32 x 100 cm Weight: 27 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat-Nr. 12-1040 in a very good condition Capacity: 12.000 litres/h Motor capacity: 4 kW New Price: 5000€ Multistage (3 Stages) Measurements and Weight: LxWxH: 124 x 38 x 112 cm Weight: 154 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 12-1085 in a very good condition New price: 2000€ Measurements and Weight: LxWxH: 50 x 35 x 105 cm Weight: 48 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1080 in very good condition Measurements and Weight: LxWxH: 820 x 34 x 90 cm Weight: 38 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1110 in a very good condition Capacity: 4000 litres/h Pressure: 10 bar Rotating speed: 1425 U/min Original Price: 3000€ Measurements and Weight: LxWxH: 82 x 38 x 105 cm Weight: 63 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 07-1255 in a very good condition Capacity: 1250 litres/hour Pressure: 4 bar Motor: 4, 8 A Measurements: Length: 105 cm Width: 40 cm Height: 70 cm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 13-0044 in a very good condition Typ: BN 3101 131 424 Testing water by 22°C back pressure at 1 bar Pressure: 1,1 bar capacity: 10.800 litres/h Motor: 1,8 kW Connection: inlet/outlet: DN 65 according to DIN 32676 can be changed on request for an additional charge Measurements: length: 96 cm width: 33 cm height: 100 cm weight: 84 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Type: comparable with AZO E 800 Stainless steel, basket: L = 770 mm, D = 300 mm, with thread of range of in the Inlet area, blocking the existing VA - sieve basket = approx. 1 mm,. Length over all: 2,800 mm Height without spout funnel: 640 mm Light inlet with range thread: 800 X 190 mm Outlet hopper / transition with cone for lower grain (flour) d = 150 mm, Height: 650 mm, Oversize - transition piece on D = 200 mm, Aspiration nozzle D = 150 mm drive: SEW with 3,0 kW

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition

Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Weight 14 kg Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ \" Connection for juice outlet 1¼ \" ; new machine - top condition

Hilge GmbH (Groupe Grundfos) HYGIANA II/4 BLOC 25 m3/h

4 piece standard chemical pump CNN 125-100-315 / ISO 2858-EN 22858 ISO 5199, in stainless steel 1.4408 / process design, 119 m3, FH 25 m, 15 KW, unused with documents and spare Mechanical seal

Fristam pumps type FP 752/250 VA, power 22 kW pressure version. Pumping height 130 m, capacity 15,000 litres. Double shaft seal. Year 2012

Flygt pumps model 3085 Top quality! Steel case, stainless steel shaft 2 kW 1395U RPM Flow rate corresponds to ca 30 l / s 1800 l / min Total length ca. 80 cm, 60 kg Very good condition! â?¬499 This is not a DIY part, these pumps are offered usually for twice. Preferred site 76829 Landau, pick up, delivery possible

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Base frame pump with mechanical seal and extension coupling, flow rate: 6m³/h, rotational speed: 1450/min, motor power: 0.37kW.

Power: 75kW, was used for milk products.

Manufacturer: EDUR Type: NUB 600 E150L Built: 2012 Condition: very good, refurbished Weight: 77 kg Volume flow: 30 m3/h Head: 31 m Power: 3.6 kW Speed: 2900 rpm Suction nozzle: DN 80 Pressure nozzle: DN 65 Operating pressure: 10 bar

IN GOOD CONDITION FOR USE, stoped running

Centrifugalpumpe,stainless acid-proof steel,Alfa Laval type ALC1D/162,7,5 kW

Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

coolant capacity: 10 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor speed: 2900 U/min motor type: 90 L engine output: 2,2 kW weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 10 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor type: 90 L motor speed: 2900 U/min Motor Capacity: 2,2 kW weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 10 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor speed: 2900 U/min motor type: 90 L engine output: 2,2 kW weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Donau DR 23 /Quick Radial /Boom Drilling Machine Drilling capacity / steel approx. 23mm Projection approx. 700mm Table contact surface approx. 1200x600mm Spindle holder MK 3 Speed range approx. 70 - 1550 rpm Feed range approx. 0.075 - 0.3mm /automatic Drilling depth approx. 130mm Thread cutting device Q7tn9 Electromotive drill head adjustment Boom forward - backward movable & horizontally swivelling Hydraulic clamping Gearshift Lateral clamping option for workpieces Chuck Documentation Dimensions approx. LxWxH approx. 2x1.6x1.9 meters Weight approx. 2to

coolant capacity: 10 m3l/h Headroom: 18 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor type: 80 L motor speed: 2900 U/min engine output: 1,1 kW weight: 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EQUIPMENT: acid-resistant impeller and housing Manufacturer: STORK Pumpen Type: FRER 80-140 Dimensions: 1000 x 400 x 550 mm Blunt: DN80; DN80 Voltage: 400 V Power: 5.5 kW

- Moteur: 1.5 PS - 2820 tours/min. - Pression max.: 2 bar - Rendement: 3.5 m3/h (2 bar) - Raccords DN 40, DIN 11851 - Avec socle à pied - Entièrement révisée

Hardly used exhaust fan - was only in operation from 2015 - 2019 and was then dismantled again Data sheets available Engine power: 110 kW Flow rate 80,000m³/h Matching exhaust tower with heat exchanger can be purchased as an option, but is very large (3.33.810m)