centrifugal used for sale

Centrax ROLLS ROYCE 5 MW CX 501 KB7 Gas Turbine-Generator Package YEAR 2011 HOURS 40 000 Equipment List: Turbine/Alternator Housing and its complete contents including: • 1 Allison 501 KB7S DLE Gas Turbine - • 1 Alternator • 1 Epicyclic Gearbox • 1 Acoustic Enclosure • 1 Alternator Control Cabinet and Software • 1 Turbine Control Cabinet and Software • 1 Auxiliary Distribution Cabinet and Software • 1 Lubrication Unit including Oil Cooler • 1 Fuel Supply Circuit in Acoustic Enclosure • 1 Electro-Hydraulic Starting System- • 1 Compressor Cleaning System • 1 DC Power Supply • Battery Charger • Fire Protection and Gas Detection Circuit • Fan acoustic enclosure • Air cooler fan List of components: • Control/command panel and room and its complete contents • Filtration assembly and combustion air ducts • Filtration assembly, silencers and box ventilat ...

Capacity: 3-axis Stroke: Longitudinal X:300 mm - Vertical Y: 350 mm- Transverse Z: 250 mm Spindle motor: Max speed: 6000rpm Continuous power :3.7 kW Peak power :5.5 kw Table: Dimensions: 300 x 300 mm Mounting: M8 centerline: 50 m Fast travel speed: 10 m/min Fast Rotation Speed B: 10RPM Tool Holder Type: BT40 Number of pitches :20

1350 m³/h - 40 m - W 208

core engine Centaur 50. The turbine and associated gearbox have been completely base overhauled after last operating and are a ready-to-install for a zero-hour turbine exchange. After the overhaul, there was no active operation / no installation. The turbine and gear box Sale Solar Centaur 50 Base overhauled core engine: Manufacturer Solar Turbines - Type CENTAUR 50 SoLoNox - Year of construction 2022 Zero-hour core turbine and gearbox - Electrical output 4,040 kWel - Speed 14,944 rpm 50Hz - Fuel Natural gas H - Design temperature 15° C - Turbine inlet temperature 665 °C (1.229 °F) - Gearbox with zero operating hours - Turbine control Solar TTS4

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Automation equipment manufactured in 2022. This CENTURION CT930 features a rated power of 43 kW and a weight of 2810 kg. It operates at a rated voltage of 3x400V and has a maximum loading of 62 A. If you are looking to get high-quality reflow soldering capabilities, consider the CENTURION CT930 machine we have for sale. Contact us for further details.

Centrisys decanter centrifuge set including: - a centrifuge -complete electrical cabinet -polymer preparation -eccentric pump All in perfect condition Currently in operation until the end of August 2026

Centauro CL900 Manufacturer: Centauro M-Nr.: 2064 Year: 1996 Motor: 5.5 KW with electro-pneumatic brake Table dimensions: 1.100800 mm Wheel: 900mm Saw height: 550 mm Max saw widt: 850mm Saw band length: 6.190 – 6.380 mm Saw band width: 30 – 50mm Tilting/blade: 45° Working height: 960 mm Dust extraction: ø120 mm Weight: 925 KG Noise: 82,3 dB(A)

HIGH SPEED MULTIFORMAT POUCH MACHINE MATERIAL WIDTH :1200MM (MAX) MATERIAL DIA : 1000 MM (MAX) POUCH WIDTH : 50-650 MM POUCH LENGTH : 30-300 MM - (250 MM X 6 =1500 MM) MACHINE SPEED :180CPM /45 meters POWER : 220V, 3 PHASE, 50/60 HZ COLOR: : STAINLESS STEEL/White COMPLETE WITH: - SHAFTED UNWIND ST AND X 1 SET - UNWIND DIA. 800 MM WITH ROLL - 3" AIR SHAFT - 2.5 KW POWDER BRAKE WITH ROTARY ENCODER AND DANCER FOR TENSION CONTROL - .55KW DRIVE MOTOR NIP WITH INVERTER CONTROL FOR UNWIND UNIT FOR CONTINUOUS MOTI ON UNWINDING - LPC SENSOR FOR UNWIND MATERIAL FOR EDGE/LINE GUIDING - PHOTO SENSOR (NT-6) FOR PUNCHING AND ELECTRONIC TOUCHSCREEN CONTROL FOR POSITIONING X 1 SET - DANCER ROLLER DEVICE X 1 SETS - UNWIND STAND CAN BE MOVED LEFT/ RIGHT BY MANUAL - ADJUSTMENT FOR QUICK SETUPS Material folding device for gussets x 1 set. Material ...

Condenser Centauro Type: ACI/R 263/96.9Y Cooling capacity: 48,3 Kw Air flow: 11400 m3/h Number of fans: 2x630 mm RPM: 660/520 Dimensions: 2880x630x1230 mm Entry/exit diameter: 42/35 mm Quantity in stock:1 Stock number: SK104 Condition: Used

Centauro SP-700 Band Saw Maximum cutting height 360mm Maximum cutting width 680mm Wheel diameter 700mm Blade length max/min : 4970/4870 mm Blade width max/min 40/10mm Tilt of the work table up to 20° 3kw main motor Power supply 400v Emergency brake CE Certified Year of production 2011 Extraction spigots 2x100mm Machine dimensions: 2180 x 1210 x 840 mm Net price

Centering device CENTRICATOR Scanning range inside 6 to 220 mm Scanning range outside 0 to 150 mm Scanning range plan 90 to 280 mm Clamping Shank SK 40 Weight approx. 2.4 kg

Centrax Gas Turbine-Generator Package - (USED) 50Hz Fuel Description Bio Gas Only Unit type M2000 KB5S Running hours 126701 Starts 2950 Megawatt hours 349558.0 mwhr Turbine speed 14580 RPM inspection report available

Centrax 501 KB57 DLE Gas Turbine-Generator Package engine overhaul in 2017 at 24 000 hours 372 start service hours 23 000

Centauro Slitting Saw Type SLG 8000 Year of construction: 2011 Cutting length max. 8000 mm Cutting width max. 1900 mm Cutting height max. 160 mm Motor 11 kW with laser light with pressure beam

Available CENTION SAB-HW18 Absorption chiller machine on perfect condition. The year of manufacturing is February of 2012. It works with lithium bromide. Power: 633 kW Equipment ready to deliver at our wharehouse.

Manufacturer: Central Mine Equipment Model: 75 Year of Manufacture: 1972 Type of Machine : drill for geotechnics Km Count : 165208 kilometers Find more here - .ucymachines/ Contact us at - sales@ucymachines

Lathe Centauro Copy lathe Type: T 2 Model: C 140/4 Clamping length 1400 mm Center height 250 mm automatic feed infinitely adjustable feed rate 0 – 1.5 m/min. Spindle speed adjustable via belt Speeds: 900 / 1200 / 1500 / 1800 / 2400 / 3000 rpm. 2 knife holders with bezel with workpiece holder for long workpieces 2 molded steel holders 3 x 3 jaw chuck with a lot of tools Dimensions 3000 mm x 580 mm x H 1260 mm Weight approx. 650 kg

GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE

Band saw CENTAURO mod. CO700 - CE rules - CE rules - Year 2014

FOR SALE CORE TURBINE CENTRAX 501 KB5 I don't have any more information since the factory has closed LOADED NOW IN FRANCE GOOD PRICE

Centurfax ccDot Printing Plates Densitometer

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Slitting saw CENTAURO SL 3000 Cutting Length 3400mm Cutting width max 600mm Cutting height max 160mm Saw size 550mm Main motor power 11kw Feed speed up to 80m/min Machine dimensions 5285x1532x2150cmH Weight 1500kg Year of manufacture 2001 Net price

SPECIFICATIONS: - Automatic workpiece blocking pneumatically controlled - Machine for the execution of slots of different lengths and depths for window parts, folding shutters and doors

Details of the equipment offered: • 1 Rolls Royce Type 501K-2044 turbine – ASP Engine Model 501-KB7, with sound-absorbing box • 1 ALEN GEARS Type STAR speed reducer – ASG34 • 1 Leroy Somer LSA 56 BUL85-4p / 6750 KVA alternator – 50 Hz • Natural gas control system • Box ventilation system • Electrical control cabinet • Fire Suppression System • Flue gas and water recovery boiler • Compressed air control system Characteristics: • Year of manufacture: 1999 • Total hours of service: 43,000 hours • Equipment still in operation, maintenance monitored by the manufacturer • Loading from France Overhauled in 2023 Photos and video available on request: This package represents an interesting opportunity for any company looking for a reliable and immediately operational solution. Do not hesitate to contact us for any further information, ...

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1380 rpm -Shaft: Ø 11 x 22 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 175/170/H140 mm -Weight: 5.6 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 3/8 - 1 inch -In the transport case -Weight: 5 kg

Max drilling depth 150 mm Max drilling length 310 mm Heading 270 x 90 mm Head rotation +/- 45? Min/max height door/window 600/1000 mm Worktable dimensions 420 x 60 mm Tilt adjustment work table +/- 45? Motor chain 2,2 kW Front mechanical pusher Automatic chain lubrication pump

air flow quantity: . m³/h suction power: . kPa power capacity: . kW The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Table size: 1200 x 800 mm Tilting table Flywheel size: Ø 800 mm Installed power: 4 kW

SPECIFICATIONS: Table size: 1100 x 900 Flywheel size: Ø 900 Saw blade: min. 6200 - max. 6400 mm Installed power: 5 HP

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

TECHNICAL DATA: Work table: 800 x 1180 mm Flywheels: Ø 900 mm Installed power: 5.5 kW TECHNICAL DATA SPLITTING MACHINE: Roller: Ø 200 mm Roller height: 210 mm Max. distance between angle and saw blade: 300 mm Max. distance between roller and saw blade: 100 mm

PRIMINER DELTA CENTER V6L CNC vertical machining center was built in 2017 in China by PRIMINER MACHINE TOOLS DONGGUAN CO., LTD. PRIMINER DELTA CENTER V6L CNC vertical machining center was built in 2017 in China by PRIMINER MACHINE TOOLS DONGGUAN CO., LTD. The machine has been regularly serviced and maintained. Throughout its service life, the following work has been carried out: – spindle reconditioning 12.2023 – regular replacement and topping up of oil and coolant in accordance with the manufacturer’s recommendations (tool magazine, spindle cooling system) – inspection of individual components – cleaning of filters – levelling of the machine – inspection of the machine’s geometry – inspection of clearances and their adjustment on gearboxes – calibration of measuring probes – creation of a backup copy of the control syste The machine is designed for mac ...

SARTORIUS CENTRISART A-14C Refrigerated Laboratory Micro Centrifuge with A1C Rotor Tubes 1.5/2ml (1-14K SIGMA) Almost new equipment, used for a few days. Model: Micro A-14C CENTRISART / SIGMA 1-14K Manufacturer Number: A-14C-1EU Type: Refrigerated Benchtop Centrifuge for Microtube Dimensions: 28x52x24 cm Weight: 19kg Speed / Force: 15000 rpm RCF max with fixed angle rotor (g): 16602 Temperature range: -10°C and +40°C Fixed rotor reference A1C For 12 tubes of 1.5 / 2ml The A1C rotor is specially adapted to Vivaspin® 500 ultrafiltration concentrators, but it can also be operated with conventional 1.5 and 2 ml conical bottom tubes. Year of manufacture: 2016

This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details.

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details.

This 3-axis Okuma ACE CENTER MF-46VA was manufactured in 2006. It features an X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 15,000 rpm and an automatic tool changer with 32 stations. If you are looking to get high-quality machining capabilities, consider the Okuma ACE CENTER MF-46VA vertical machining centre we have for sale. Contact us for further details.

Laboratory centrifuge ID DIAMED id-centrifuge 12 S II In excellent working condition Technical specifications: Number of ID cards: 12 Rated speed: 1030 rpm Dimensions: 30 x 36 x 18cm Weight: 6kg Rotor: 009551

vertical machining center, year 1998, CNC 18. Used machine in good condition. More info & price on IndustrialBuyer.

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold

Amut Vertical centrifugal dryer under refurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content (less with LLDPE, more with rigid plastics), Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon are included in this offer, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h depending on material and water %, conditions: reconditioned with warranty, ty ...

This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.

Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement.

Control: Fanuc x-travel: 660 mm weight: 4 t : ja control: Fanuc 10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.