centrifugal pump used for sale

Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump -Manufacturer: DIGEP Diósgyor Maschinenfabrik, centrifugal pump type DP-AMIIV -Engine: Evig 2.2 kW -Performance: 14 l/s / 840 l/min / 50.4 m³/h -Delivery height: 8 m -Pipe connection input: Ø 100 mm -Pipe connection output: Ø 75 mm -Dimensions: 580/290/H380 mm -Weight: 83 kg

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multi-stage vertical centrifugal pump -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm -Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

Stock number: PC9237, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 4 kW - 400 Volt - 3000 rpm., Theoretical capacity: 20.000 l/h, Working pressure : 3,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Pomac, Type: 21044 (175x14), Model: CPC, Year: 2014

Self-priming centrifugal pump with stainless steel housing., Additional title: self-priming centrifugal pump, Frequency: 1450 1/min, Power: 4,0 kW, Material: stainless steel, Features: stainless steel housing

2 KSB centrifugal pumps with frequency control from the ice water circuit of a refrigeration system. Capacity: 2 x 15 m³/h at 2 bar, Additional title: centrifugal pumps, Delivery rate: 15 m³/h, Delivery pressure: 2 bar delivery head 20 m, Running direction: clockwise

Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you., Material: Pump housing and impeller in stainless steel, Position: free standing/mounted on base, Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter

Stock number: PC9240, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 0,75 kW - 220/380 Volt - 2900 rpm., Theoretical capacity: 5350 l/h., Stage: 1, Working pressure : Max 3,4 bar, Working temperature: Max 90° C, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Pedrollo, Type: CP 158 - ST6

Technical details Type: Industrial centrifugal pump set Configuration: - End-suction centrifugal pump - Horizontal pump arrangement - Belt-driven electric motor - V-belt transmission system - Protective belt guard - Steel skid/base frame mounting - Cast-iron pump housing - Flanged suction and discharge connections Application: - Boiler feed water systems - Process water circulation - Cooling water systems - Industrial utility services - General liquid transfer operations Construction: - Heavy-duty cast-iron volute casing - Steel base frame - Industrial electric motor drive Estimated motor power: Approx. 7.5–15 kW Estimated connection size: DN80–DN125 Dimensions: - Length: Approx. 1400 mm - Width: Approx. 700 mm - Height: Approx. 900 mm Weight: Approx. 350 kg Condition: Used Observed condition: - Complete pump and motor assembly present - Belt guard ins ...

Used single-stage centrifugal pump of the ZLKC series from SIHI (Sterling SIHI) with a directly coupled three-phase electric motor from Loher. The pump is designed for pumping liquids in industrial processes and is suitable for use in chemical, energy and supply technology. The flow rate is 150 m³/h at a head of 28 m and a speed of 1450 1/ min.The unit is used and shows normal signs of wear due to use as well as slight traces of corrosion on the nameplate and on surfaces. The pump and motor are mounted on a common base frame. Scope of delivery: 1 SIHI ZLKC centrifugal pump with Loher electric motor Without additional accessories Type: ZLKC 100/250 Version: AK BAN OB.2 Delivery volume (Q): 150 m³/h Delivery head (H): 28 m Speed (n): 1450 1/min Motor power (P): approx. 11 kW (information on the sign sometimes difficult to read) Motor manufacturer: Loher Motor type: ANG A-160MB- ...

Used single-stage centrifugal pump of the ZLKC series from SIHI (Sterling SIHI) with a directly coupled three-phase electric motor from Loher. The pump is designed for pumping liquids in industrial processes and is suitable for use in chemical, energy and supply technology. The flow rate is 150 m³/h at a head of 28 m and a speed of 1450 1/min. The flange connections show slight traces of rust, the housing is mechanically intact. Scope of delivery: 1 SIHI ZLKC centrifugal pump with Loher electric motor Without additional accessories Type: ZLKC 100/250 Version: AK BAN OB.2 Delivery volume (Q): 150 m³/h Delivery head (H): 28 m Speed (n): 1450 1/min Motor power (P): approx. 11 kW (information on the sign sometimes difficult to read) Motor manufacturer: Loher Motor type: ANG A-160MB-04C Motor voltage: 380/660 V Motor standard: VDE 0530 Motor frequency: 50 Hz Protection class  ...

1 of used centrifugal pump, make Alfa Laval, type LKH-45/178 SSS with 11 KW ABB motor, new 2010. On stainless steel frame, with cover.

Worthington 50WR200 Centrifugal pump two in stock, 15Kw motors, 2940 RPM, 50mm discharge outlet, 3Ph

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1455, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A, Estimated capacity: ± 30 m3/h

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1454, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

The APV Puma 2.2.9 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor). Diameter of the impellor: 191 mm (7,5). Pump casing: 9. Connections on the inlet: 2. Connections on the outlet: 2. Capacity with the current motor: ± 35 m3/h at a differential pressure of ± 2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1656, Diameter of the impellor: 191 mm, Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor), Current estimated capacity: ± 35 m3/h at a differential pressure of ± 2 Bar

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1456, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1445, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

- inv 601 - Centrifugal pump for thermal circuits (hot/cold) P.S.C. type engine: - speed: between 2890 and 2910 rpm depending on the voltage (see plate) - power: 9.2 kW Note: Supplied with gasket, cast iron impeller but without pump casing Auction-ID: A1-49706-3

Water Pump/ Slurry Pump Manufacturer: Allweiler Model No.: CLT-H-80-250 150 m³/h 95.2 mtr. Head Electric Motor : Allweiler Type: 16BA280-2AC B3 75kw The pump is new and unused, but may show signs of storage.

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

; NEW

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

Key data: 199 , 6 , 40

FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Elektra power 7.5 kW -Speed: 1435 rpm -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 1160/1900/H1770 mm -Weight: 390 kg

Fan, fan, electric motor, blower, centrifugal roof fan, emergency ventilation fan, flue gas fan -Speed 1420/1260 rpm -Line 0.13/0.09 kW -Dimensions 670/670/H445 mm -Weight 24 kg

Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, centrifugal fan radial fan type R2D190-AA04-19 -Voltage: 415V 50/60Hz 66/77W -Quantity: 1x fan available -Dimensions: 380/260/H85 mm -Weight: 2.8kg

Centrifugal grinding machine / sliding grinding machine for deburring, rounding, polishing of factory troughs. Machines with 18, 60 or 160 litre capacity. Machines incl. dosing pump, speed control and control cabinet - separian unit optional. Detailed offer on request;; New

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition

Centrifugal quick-release chuck, centrifugal chuck, three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Centrifugal quick-release chuck, centrifugal three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -Cone mount: Ø 62 mm -Bolt circle: Ø 82 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Bran centrifugal Buhler type MKLA 45-110, 4 KW, Nr. 218056, V-belt drive 1050 RPM We have several bran centrifugals of different production years in different conditions at various costs in our stock. Just ask. We are happy to support you to find an affordable solution for your requirements.

Technical details Type: Industrial centrifugal blower Configuration: - Belt-driven centrifugal fan assembly - Electric motor drive - Large volute fan housing - Air intake silencer/filter assembly - V-belt transmission system - Steel skid-mounted base frame - Large-diameter duct connections - Horizontal shaft arrangement Application: - Textile plant air extraction - Pneumatic conveying systems - Dust collection installations - Process ventilation - Boiler combustion air supply - Industrial drying systems - Vacuum and air transport applications Construction: - Heavy-duty cast fan housing - Industrial steel base frame - Belt-driven transmission system Estimated motor power: Approx. 7.5–18.5 kW Estimated airflow: Approx. 5000–20000 m³/h Estimated fan diameter: Approx. 500–700 mm Dimensions: - Length: Approx. 1800 mm - Width: Approx. 1000 mm - Height: Appr ...

Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible.

4kW Auction-ID: A1-49374-56

Kemutec KEK Centrifugal sifter Stainless centrifugal sifter, ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh, 3Ph

Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

buckles: 4 knives: 1 max. paper size: 49 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Immediately available used centrifugal lubricating oil fitter

Centrifugal fan REITZ MXE 125-016030-00 Type GR 90° direct drive 45 kW m³/min 160 mm WS 1250 Intake ø 350 mm, outlet ø 275 Workshop tested, very good condition

Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph

Immediately available new

Stock# UG6379 Little used centrifugal blower fan model GF-30. Working output in range from 27000 - 32000 m3/h, at pressure 6-5,8 kPa. Driven by el motor 75 kW, 1450 rpm, 380/660 V, 50 hz. Working temperature up to 20C. New 2021. Shipping dimensions: L 205 cm x W 240 cm x H 220 cm x weight approx 1000 kg. Includes technical documentation.

Centrifugal fan, centrifugal fan, centrifugal fan VEM 8883.2 pneumatic wheel: Ø 160 mm Motor : 0.11 kW 24 V DC armature voltage 18 V DC New ! Dimensions: 310 x 270 x 240 mm

Centrifugal fan, centrifugal fan ZIEHL-ABEGG Type: RD20S-4EW.4C.1L Speed: 1140 rpm Motor : 0.36 kW 230 V AC used, tested ! Dimensions: 380 x 320 x 350 mm

Centrifugal fan, centrifugal fan, centrifugal fan KIPSZER CK250/2 pneumatic wheel: Ø 250 mm Motor : 0.75 kW 220 / 380 V 2850 rpm used, tested ! Dimensions: 500 x 500 x 540 mm

Centrifugal fan, centrifugal fan CINCINNATI FAN PB-10A 457-17620-00 0.37 kW 220 / 380 V New ! Dimensions: 480 x 430 x 650 mm

Centrifugal fan, centrifugal fan, centrifugal fan, mobile MAW ARMATURENWERK ZITTAU ELN-NO. 132 69 319 KENN-NR. 81-1 1020 m3/h pneumatic wheel: Ø 260 mm Motor : 0.75 kW 220 / 380 V 2790 rpm New ! Dimensions: 1000 x 540 x 800 mm

Centrifugal fan, centrifugal fan SIEMENS blower 2CW5367-1 n: 2760 rpm motor : 0.26 kW 230 / 400 V IP55 New ! Dimensions: 335 x 310 x 300 mm

Centrifugal fan, centrifugal fan, centrifugal fan ABB MT80A19F165-2 n: 2850 rpm pneumatic wheel diameter: Ø 180 mm motor : 0,0,000 rpm 75 kW 220 - 240 / 380 - 420 V IP55 used, tested ! Dimensions: 410 x 320 x 290 mm

Centrifugal fan, external fan with bracket EBM PAPST R2D190-AC08-09 n: 2500 rpm motor : 43 W 415 V New ! Dimensions: 380 x 260 x 85 mm