centrifugal pump used for sale

Gear Pump, Transfer Pump with Motor and Filter WMW, ORSTA A20-25-63 VS Pump: AC 1,6 TGL 17-747407 Qmax: 1.6 l/min pmax: 6.3 bar engine: Type 1260.1/1 0.06 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 460 x 250 x 170 mm

Stock number: P311, Barrel pump, stainless steel,, Lutz type Niro 40., Ex motor 220 volt,, 460 watt, 9100 rpm., Straw Ø 40 x L 900 mm.

Stock number: P319, Feed pump,, Grundfoss type DDA 7,5-16 FCM., Max 7,5 l/h.

Submersible Pump, Coolant Pump SCHMALENBERGER THK 12 32-08/2 Immersion Depth: 240 mm Pump Foot: Ø 145mm Pump Flange: Ø 180 mm Q: 4,4,00 mmbr / 8 m3/h P: 10.8 bar Pipe connection: 1 1/4 inch ( female thread ) Motor: ATB CAF 100L/2C-11 4 KW 2860 rpm 400 V 3AC IP54 New ! Dimensions: 890 x 240 x 255 mm

Chemical pumping station PAGUS plastic cabinet 700 x 830 x 1590 mm air diaphragm pump ALMATEC AC-E 10 Operating pressure: max 10 bar cabinet almost metal-free ! Dimensions: 700 x 830 x 1590 mm

Stock number: P285, Barrel pump, stainless steel,, 18800 rpm. 220/380 V., Straw Ø 33 mm. x L 3025 mm., Material: Stainless steel AISI 304

Coolant tank with pump ERNAULT-TOYODA 250 liters (e.g. b. for Ernault-Toyoda HES52) pump 120 l/min 3.5 bar 1.1 kW 220 / 380 V used, tested ! Dimensions: 1400 x 1100 x 750 mm

Stock number: P290, Membrane pump, plastic,, Ø 1/2, ASTI type PFD2 216., Max pressure 4 bar,, max capacity 1450 l/h., Material: Plastic

Dosing pump with tank and mixer, chemical pump SERA M412S0 diaphragm pump max. 3 bar 0 - 500 l/h motor: 0.0.00 37 kW 220 / 415 V Mixer: TMR AMS 018/8 Motor: 0.18 kW 670 rpm 230 / 400 V Tank: 230 l stainless steel ! used ! Dimensions: 550 x 670 x 630 mm

Machine Name: High Pressure Pump Manufacturer: Abel Type: HP-K-25-56 Year of Make: 2012 Degree of protection: IP 55 Speed: 1480 rpm Operating voltage: 4009 / 690 V Flanges: DN 80 Frequency: 50 Hz Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 14,400 l/h Dimensions: Approx. L 1600 x W 1400 x H 1600 mm Curb weight: 1500 kg Technical documentation: No Condition: Used Price: On request

Machine Name: High Pressure Pump Manufacturer: Abel Type: HP-K-25-56 Year of Make: 2004 Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 14,400 L/h Dimensions: L 2,000 x W 1,000 x H 1,000 mm Curb weight: 1,500 kg Tech. Documentation: Yes Condition: Used Price: On request

Stock number: P276, Butter pump, stainless steel,, Kolding type 2201., Inlet Ø 2,5, 2,2 kW motor., Gear 110 rpm.,, 220/380 volt., Material: Stainless steel AISI 304

The Bosch Rexroth AA4VG71EP4D1/32R-NSF52F011DP-S (R902232818) is a high-pressure axial piston pump designed for closed circuit applications. This particular model features an integrated boost pump that serves the dual purpose of providing boost and pilot oil supply, ensuring consistent and reliable performance. The swashplate design allows for the smooth change of flow direction as it moves through the neutral position, which is essential for precise control in various applications. This pump is equipped with high-pressure relief valves that incorporate a boost function, enhancing its safety and efficiency. Additionally, it comes with an adjustable pressure cutoff as standard, offering customization according to specific system requirements. The inclusion of a boost pressure relief valve further contributes to its operational safety. Bosch Rexroth has designed this model to be versatile, ...

Stock number: P280, Pump, stainless steel,, ABS/SIHI type AKLA 1201., Mounted on stainless foundation,, 0,55 kW motor., 1410 rpm.,, 380 volt., Theoretical capacity max 2500 l/h., Material: Stainless steel AISI 304

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Stock# U2443-3 Used twin screw pump by Bornemann type SLH 125-38. Contact parts stainless steel. Feeding inlet has diameter 80 mm, discharge outlet 65 mm. Pump has working output in range from 3 to 5.5 m3/h. Working rotation in range 328-468 rpm. Product viscosity up to 10000 cSt. Pump is driven by el motor 11 kW, 720 rpm, 380/660 V, 50 Hz. Feeding pressure up to 15,8 bar, suction pressure -0,20 bar. Self-priming pump in hygienic design. Mounted on stainless steel platform.

Stock# U2456-4 Used lobe/rotary pistons pump by SPX Waukesha Cherry-Burrell model 030 U1. Contact parts designed in stainless steel. Horizontal inlet and outlet connections, each with diameter 35 mm. Maximal rotation of lobes up to 600 rpm. Working rotation on this drive up to 187,41 rpm. Pump has working output, depending on the product, up to 8200 l/h. On current drive and rotation working output up to 2550 l/h. Working pressure up to 13.8 bar. Pump is driven by reducer and el motor 2.2 kW, 1430 rpm, 380 V, 50 Hz. Ex proof design - ExII2GEExceIIBT4. Pump is mounted on stainless steel supporting plate.

KSB Submersible Motor Pump with Water-Filled Motor Manufacturer: KSB Item number: 110 321 Type: BRZS 535 /1a Motor Type: 12 A 923 Operating voltage: 380/660 V Rated current: 191/111 A 92 kW Speed: 450 1/min Q: 250 m³/h H: 26 m IP: 58 Year of manufacture: unknown Length: approx. 2750 mm The pumps are unused stock goods and are delivered in the original KSB wooden freight crate. More pumps - new and used - can be found in our shop! International shipping costs on request!

Brand Metso Type Pump Model USHM 75 |180 w9Hc Chassis number 3013720100101,00 Year of construction 2011 Weight 0.5 ton Assets 11Kw Length mm 3200 Width mm 700 Height mm: 1100 Transport dimensions L x W x H 3.2 x .07 x 1.1 State machine Good Type of control Automatic Electrical connection 32A 5p Photos/film available: Yes

Stock number: P269, Dose pump, PVC/stainless steel,, Grundfos Alldos type DMH 24-10,, B-PVC/V/G-X-44B1E1., Ex motor 0,18 kW, 1330 rpm., 220/380 V., Capacitet max 24 l/h. (Variabel), Pressure max 10 bar., Material: PVC/Stainless steel AISI 304

Stock number: P237, Vacuum pump, stainless steel,, SIHI type AKHK4101, Mounted on painted frame with wheels., 1,5 kW motor, 1420 rpm, 220 / 380 V., With motor shield., Material: Stainless steel AISI 304

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Danfoss 83024044 PUMP-VAR-DISPL HYDRAULIC PISTON PUMP Weight: 24.6 kg Availability: 1 P.max. - 350 bar Nobmy Exov D Hk Ej Ipocu REF/Serial Number: 026-67039-0 Part number: C5V08-311B1 Manufacturing site/service centre: 41564 KAARST Germany PTS ID/Tracking ID: VKU82E77 Unique Identifier

Stock number: P252, Feed pump, stainless steel,, ProCom, Type DS 15/50, 0,18 kw motor 220/380 V., Dosing 0-5 l/hour., Max 2 bar., Material: Stainless steel AISI 304

Brand-new Sauer Danfoss 11028185 Hydraulic Pump—a high-performance, durable hydraulic component designed for industrial and mobile machinery applications. Model Code: JRR045BLS192 Serial No: S074826737 Max Pressure: Up to 350 bar (verify with specs) Country of Manufacture: Made in Slovakia Ideal for heavy equipment, construction, and hydraulic systems Model No./Ident No.: 11028185 Net weight: 29 kg Manufacturer: Sauer Danfoss Availability: 2 Ncobsv D H Evomy Ex Ipeu

Stock number: PT1069, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Lobe pump, Amount in stock: 1 pc., Motor: 0,75 kW - 220/380 Volt - 930 rpm., Theoretical capacity: 2957 l/h., Throughout: Vertical, Connections: Ø 1, Manufacturer: Ibex, Type: NMOG/322, Other: Plast lobes

Stock number: P253, Feed pump, stainless steel,, ProCam Type DP 15/50, 0,18 kw motor 220/380 V., Dosing 0-5 l/hour., Max 2 bar., Material: Stainless steel AISI 304

Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Eccentric screw pump, Amount in stock: 1 pc., Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30

Stock number: P223, Vacuum pump, Pompetravani,, type BT 292/1KC/A3., 1,35 kW motor, 1415 rpm., 220 / 380 V.

Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Eccentric screw pump, Amount in stock: 1 pc., Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8

Stock number: P234, Feed pump, plastic,, Sera type R409.1-18E., 0,18 kW motor, 2850 rpm, 220/380 V., Variable speed., Capacity 0-18 l/h., Material: Plastic

Stock number: PM2076, Eccentric screw pump, stainless acid proof steel,, Seepex type BT 2-12., 1,5 kW. gear motor,, 220/380 V., 186 rpm., Screw feeding,, inlet flange L 350 x W 180 mm., Theoretical capacity 1.000 l/h., Material: Stainless acid proof steel AISI 316

Stock number: P235, Feed pump, plastic,, Sera type R409.1-18E., 0,18 kW motor, 2850 rpm, 220/380 V., Variable speed., Capacity 0 - 18 l/h., Material: Plastic

Stock number: P250, Feed pump, stainless steel,, BRAN & LÜBBE type V-J33,, 4-headed., 2,2 kW motor, variator gear., Material: Stainless steel AISI 304

Stock number: P233, Self-priming side channel pump, stainless acid proof steel,, Pompe Travani type BT 501/3KO/A3., 1½ connections., Excl. motor (max. 5,5 kW, 1400 rpm.), The pump has not been used., Max. capacity 21000 l/h., Max. 3,6 bars., Material: Stainless acid proof steel AISI 316

Stock number: P229, Side channel pump, stainless steel,, type AHK 25-11/1., Mounted on painted foundation with wheels., 0,75 kW motor, 1400 rpm, 220/380 V., With motor shield., Material: Stainless steel AISI 304

Stock number: P207, Feed pump, stainless acid proof steel,, Watson-Marlow model 5003U., Magnetic driven pump head with Teflon, toothed wheel., 0,18 KW motor, 2655 rpm, EE x II., Material: Stainless acid proof steel AISI 316

Stock number: P197, Side channel pump, Sterling SIHI,, type ADHL., 3 kW motor.

Stock number: P198, Vacuum pump, Trium nr. 2105,, 4 kW motor, 1430 rpm, 380 V., Capacity 1200 l/min., Meter lift 8,3.

Stock number: P200, Side channel pump head,, Sterling SIHI,, excl motor.

Stock number: P195, Feed pump, Delta Scientific,, auto step III., Variable pump speed., Variable flow and dosing., Pause function.

Stock number: P135, Vacuum pump, ALA,, piston type., For V-belt drive.

Stock number: P177, Feed pump, stainless steel,, Lewa type FD2., 2-headed., 0,37 kW motor, 220/380 V., 65 strokes/min., Material: Stainless steel AISI 304

Stock number: P179, Feed pump, stainless steel,, Lewa type EKM 1., 0,25 kW motor, 220/380 V., 110 strokes/min., Max. capacity 19,91 l/h., Material: Stainless steel AISI 304

Stock number: P338, Hose pump,, Wilden type KCS 10-Z-ABNC-SZZZ., For 10 mm. hose,, 0,25 kW gear motor., 20 rpm., 230 Volt., Capacity 100 l/h.

Stock number: P330, Hose pump,, Ø 8 mm. hose., 0,25 kW. motor,, 220/380 V., Variable speed.

Stock number: P305, Hose pump,, Watson Marlow type 701 P/R, Pneumatic., Max 360 rpm.

Stock number: P308, Hose pump, Multifix,, 110 W motor., 230 V., Forward/backward function,, variable speed 0-5000 rpm., Can be mounted with different hose diameter from 5-10 mm.

Stock number: P254, Hosepump, Knight Equipment,, stainless cabinet.