centrifuga used for sale

Stock number: PC3157, Centrifugal pump, stainless acid proof steel,, Kolding type 5110., 4 kW motor,, 2800 rpm,, 380 V., Material: Stainless acid proof steel AISI 316

Stock number: PC3129, Centrifugal pump, stainless acid proof steel,, Kolding type 5111., 0,37 kW motor,, 1400 rpm,, 220/380 V., Material: Stainless acid proof steel AISI 316

Stock number: PC3130, Centrifugal pump, stainless acid proof steel,, Kolding type 5111., 2,9 kW motor,, 2820 rpm,, 220/380 V., Material: Stainless acid proof steel AISI 316

Properties: Length 770 mm Width 320 mm Total height 410 mm Material V2A (AISI 304) 1.4301 Description for diatomaceous earth filters SCHENK Connections: Suction side DN 65 Print side: DN 90

Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation

Centrifugal fan KASTRUPFabr. No. 27688/1 Year of construction approx. 1985Volume flow approx. 4000 m3/hIntake pipe 250 mmExhaust air connection 400 x 120 mmEngine speed 1440 rpmEngine power 5.5 kWNee connection 380 volts, 50 Hz.- Metal housingSpace requirement L x W x H 1100 x 900 x 1220 mmWeight approx. 150 kgGood condition; used

Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized

Description: Operating pressure test: 6 bar Engine: 37 kW - With connections: suction side: flange DN 80 and pressure side: flange DN 150 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1100 mm Width: 650 mm Height: 1120 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Centrifugal pump FRISTAM Capacity: 2,500 l/h Flow rate: 2,500 l/h Operating pressure test 2.3 bar Motor: 2.2 kW Connections: suction side and discharge side: DN 80 - With chassis mobile with 2 swivel and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 850 mm Width: 500 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost.

Flow rate: 6,300 l/h Operating pressure test 1.9 bar Motor: 5.5 kW Connections: suction side and discharge side: DN 65 - With chassis mobile with 2 swivel and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 750 mm Width: 500 mm Height: 1040 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost.

Flow rate: 143 m³/h Operating pressure test: 32 bar Motor: 11 kW - With connections: suction side DN 65 and pressure side: DN 80 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1020 mm Width: 520 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

General SKU389X986 LocationBarneveld MakeDickow Pumpen TypeNCL s 200/400 Mach.No.24221005 Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Centrifugal Pumps MaterialSilicon steel 1.5023 Information Year of construction2024 Mounted on framecheck Total height1,05 m CEcheck Floorspace0,85 x 2,2 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU389X985 LocationBarneveld CEcheck MakeDickow Pumpen Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump MaterialSilicon steel 1.5023 Centrifugal Pumps Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Information TypeNCL s 200/400 Mach.No.24221006 Year of construction2024 Mounted on framecheck Floorspace0,85 x 2,2 m Total height1,05 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Peeling machine for spelt, oats, sunflowers Built in 2020, only 3 years in operation Motor power 5.5 kW with riser for tray separation Control cabinet

General SKU427X1329 LocationBarneveld CEcheck MakeFlowserve Pressure Working pressure25 Bar Main Features MaterialHastelloy Volume30000 Ltr. Motor2.2 KW Specified Features - Centrifugal Pump MaterialStainless steel 2.4819 (Hastelloy C-276) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity± 10-30 m³/h With motor2,2 kW (400 V, 2877 rpm (Ex)) InletDN32 OutletDN50 Information TypeMARK 3 ISO Mach.No.ES1824032-01 Year of construction2020 Mounted on framecheck Floorspace0,9 x 0,4 m Total height0,5 m Weight120 kg ATEX compatiblecheckCentrifugal PumpsFlowservePumps > Centrifugal PumpsBrand > Flowserve What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, centrifugal fan type DKHR 310-4 -Speed: 1370 rpm -Lesitung: 0.15 kW -Protection rating: IP 44 -Quantity: 12x blowers available -Price per piece -Dimensions: Ø 310 x 165 mm -Weight: 5.5 kg/pc.

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/104-3 -Drive: 0.55 kW -Speed: 2840 rpm -max. delivery rate: 0.5-2.4 m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg

Centrifugal pump, water pump, peripheral pump, domestic water pump, cooling water pump -Manufacturer: Pedrollo, Peripheral pump surface pump type PK60-1 -Connection: 220/380 volts -Power: 0.37 kW -Speed: 2900 rpm -Flow rate: max. 40 l/min -Suction height: max 8 m -Quantity: 1x Pumps Available -Price: per piece -Dimensions: 300/140/H153 mm -Weight: 5.9 kg/pc.

Centrifugal pump, water pump -Pump housing: Nirosta -Pump wheel: stainless steel -Max. Delivery rate: 80 m³/h -Max. H: 4 mWs -Motor power: 2.5 kW -Speed: 1415 rpm -Pipe connection inlet: DN125 -Pipe connection outlet: DN80 -Number: 1x pumps available -Price: per piece -Dimensions: -Weight: 125 kg

Centrifugal pump, water pump -Manufacturer: gwk, self-priming centrifugal pump type WP 60 -Motor: 0.55 kW 2800 rpm -Pump: Speck Pumps -Max. Flow rate: 45 l/min -Max. Delivery height: 55 m -Quantity: 1 pieces available -Price per piece -Dimensions: 280/140/H150 mm -Weight: 10.8 kg/pc.

Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Centrifugal pump, water pump, stainless steel pump, food pump, peripheral impeller pump, coupling housing magnetic coupling centrifugal pump -Manufacturer: Sondermann, coupling housing for magnetic coupling centrifugal pump -Type: MA-EFSK-24-200-1,1/35 -Dimensions: see photo dimensions -Dimensions: 230/215/H230mm -Weight: 8kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Bossler, radial fan -Type: unfortunately no exact type designation, see photo -Speed: 2820 rpm -Power: 0.55 kW -Protection class: IP 54 -Connection input: Ø 155 mm -Dimensions: 300/280/H300mm -Weight: 10.4 kg

Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump -Manufacturer: DIA, centrifugal pump type Z80V-2 -Engine: Bauknecht 4.4 kW -Performance: m³/h -Pipe connection input: Ø 80 mm -Pipe connection output: Ø 95 mm -Number: 2x pump available -Price: per piece -Dimensions: 540/360/H700 mm -Weight: 96 kg

Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump -Manufacturer: DIGEP Diósgyor Maschinenfabrik, centrifugal pump type DP-AMIIV -Engine: Evig 2.2 kW -Performance: 14 l/s / 840 l/min / 50.4 m³/h -Delivery height: 8 m -Pipe connection input: Ø 100 mm -Pipe connection output: Ø 75 mm -Dimensions: 580/290/H380 mm -Weight: 83 kg

Centrifugal pump, water pump, domestic water pump, garden pump, high-pressure centrifugal pump -Manufacturer: WILO, high-pressure centrifugal pump type Helix V1008-1/16/E/KS/400-50 -Power: 3 kW -Flow rate: l/h -p max: 16 bar -Number: 2x pump available -Price: per piece -Dimensions: 250/240/H950 mm -Weight: 47 kg/piece

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multi-stage vertical centrifugal pump -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm -Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible.

Centrifugal concentrator Eppendorf plus 5305 Model: concentrator plus Max speed: 1400 RPM Heating Levels: Ambient, 30°C, 45°C, 60°C Time range: 1 min to 9 h 59 min, continuous Vacuum level:

Pump Manufacturer: Dynamic Pumps Pump Type: FTB 200-150-315 Engine manufacturer: KSB Motor power: 30 kW Speed: approx. 1470 rpm at 50 Hz Flow rate: approx. 300 m³/h Lifting height: approx. 21 m Voltage: 400 V Triangle / 690 V Star at 50 Hz Degree of protection: IP55 200 mm suction connection 150 mm pressure port 315 mm impeller diameter Single Stage Centrifugal Pump axial entry (front) radial exit (top)

centrifugal separator NZ-50 Max. speed 3,000 min-1 Max. rotation speed 2,310 m/min Manufacturer information The NZ-50 centrifugal separator is suitable for Tasks with low volume flows and solids quantities. Sludge emptying is done manually. The compact design allows for easy integration into production equipment, for example by assembling it on machining centres. Special materials also make it easier to use in aggressive media possible – at temperatures up to 90 °C and a pH range from 1–14 . Auction-ID: A7-46802-3

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH4-40/4 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm -Dimensions: 230/180/H435 mm -Weight: 14.9 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg

Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Brinkmann, pressure booster pump type FH 45-54-05 -Drive: 3.3 kW -Speed: 2900 rpm -Max. flow rate: 30 l/min -Max. delivery head: 168 m -Dimensions: 285/220/H1010 mm -Weight: 46 kg

Material Name: Centrifugal Fan 15hp c/w motor Material Brand: Generic Model: 630 (1300X1100) Material Type: Centrifugal fan (radial fan / blower) PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F24WH (F49)

Centrifugal pump for thermal circuits (hot/cold) - Ref 601 Manufacturer: Salmson Type: BM-LRC204B-20/9 Year (engine): 2001 Serial Number: 051 35703 Dimensions (W x D x H): approx. 800 x 550 x 750 mm P.S.C. type engine: - speed: between 2890 and 2910 rpm depending on the voltage (see plate) - power: 9.2 kW Note: Supplied with gasket, cast iron impeller but without pump casing Auction-ID: A1-47051-30

Capacity: 36m3 per hour, pump height: 37.80 meters, Diameter: 142mm. Auction-ID: A1-41277-234

Auction-ID: A1-46820-50

Schenk ZHF Kieselguhrfilter, Additional title: Kieselguhr filter, Capacity: 3000 l/h, Max. pressure: 6 bar, Max. temp.: 20 °C, Vessel content: 680 l, Operation / Control: manual operation, with buttons / switches on the control box, Material: stainless steel, Position: Fixed to the floor on a frame, Features: CIP heat exchanger with fittings, dosing vessel, dosing pump, control cabinet, electric motor for shaft drive

Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force., Capacity: 140 hl/h, Vessel volume: 26 hl, Length: approx. 4000 mm, Width: approx. 2000 mm, Height: approx. 3500 mm, Material: Stainless steel1.4541 (vessel), Base construction: on feet, Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology

Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you., Material: Pump housing and impeller in stainless steel, Position: free standing/mounted on base, Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter

We sell here 8x Magnetic Centrifugal Pump Canned Motor Pump RSPM1.5 see nameplate good condition Best view Auction-ID: A7-47308-48

Centrifugal extraction turrets 400 ºC/2h with vertical rejection ATEX Auction-ID: A1-46676-10

drum diameter:400 mm revolutions per minute:980 U/min total power requirement:2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side ...