centre lathe used for sale

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

Doosan DNM 750 II Machining center - vertical - new in 2016 - control system: FANUC

Max Machining Dimentions : 3200x1190x70 mm Min Machining Dimentions : 200x70x8 mm Drilling head 15 spindles include sawing unit in X direction Linear tool changers 6

This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, its ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine.

This 4-axis YCM MV106A vertical machining centre was manufactured in 2006. It features a generous XYZ travel of 1020 x 600 x 600 mm and a robust table size of 1120 x 600 mm, with a maximum table load of 800 kg. The machine is equipped with a 30-tool automatic tool changer and coolant in the spindle. If you are looking to get high-quality machining capabilities, consider the YCM MV106A machine we have for sale. Contact us for further details.

SPECIFICATIONS: Working table: 1000 x 1000 mm CNC control: Bosch CC 120 3-axis machining: X: 1050 mm Y: 920 mm Z: 110 mm 6-fold tool changer Spindle: ISO 25 Vacuum pump (VGS): 40 m³ air Total power: 12 KW Spindle motor power: 4 KW Speed: 18000 rpm EQUIPMENT: 4 spindles

This 5-axis SPINNER U5-2520 was manufactured in 2017. It features an impressive X-axis travel of 2,660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 104 tools. If you are looking to get high-quality milling capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Mazak NEXUS 4000 II was manufactured in 2011. It features an X-axis travel of 560 mm, Y-axis travel of 630 mm, and Z-axis travel of 640 mm. The machine has a maximum workpiece diameter of Ø630 mm and a weight capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 4000 II horizontal machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details.

Double Column Machine SNK RB-7VM Year 2007 5 axis control (X,Y,Z, Wm, Ws) FANUC 18i-MB Bet Column : 4100 Table : 6000 X 3500 XYZ: 6250 x 4500 x 600 W: 2100 Main axis / Quil: 90/ 300 40~8000 rpm ATC :40, AAC Angular Attachment : (L=300)

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details.

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

This 4-axis DOOSAN HM 8000 was manufactured in 2007. It features an impressive X/Y/Z axis travel of 1250 x 1000 x 1000 mm and a maximum load capacity of 1600 kg. The machine includes a tool magazine capacity of 90 positions and operates with a spindle speed of 20 - 6,000 RPM. If you are looking to get high-quality machining capabilities, consider the DOOSAN HM 8000 horizontal machining centre we have for sale. Contact us for further details.

Grinding wheel dimensions (od x id x width): Ø 508 x 304.8 x 250, Regulating wheel dimensions (od x id x width): Ø 255 x 155 x 250

This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details.

This 4-axis AXA DBZ vertical machining centre was manufactured in 2005. It features a travel of 750 mm in the X and Y axes, and 600 mm in the Z axis. The machine includes a robust table size of 1000 x 500 mm, with a maximum table load of 800 kg/m². If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON MILL FX 1250 was manufactured in 2015. It has a mass of 9700 kg and operates at a voltage of 400 V with a full load current of 63 A. If you are looking to get high-quality machining capabilities, consider the CHIRON MILL FX 1250 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS VF-2SSYT vertical machining centre was manufactured in 2016. It features a 30.0 hp spindle with a maximum speed of 12000 rpm and a torque of 122.0 Nm at 2000 rpm. The machine includes a 30+1 side-mount tool changer and supports a maximum table load of 680 kg. Rapid traverse rates reach up to 35.6 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information.

This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details.

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a table size of 1200 x 540 mm and impressive travels of 1020 mm in the X-axis, 540 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a 30-position automatic tool changer and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 500 vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak VARIAXIS500-5XII was manufactured in 2006. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 60 positions. The machine has an impressive X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS500-5XII vertical machining centre we have for sale. Contact us for further details.

This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine.

Key data: 900 mm, 560 mm, 480 mm

Inv. Num. : 5373 Type: MCV 1000 POWER 5AX Producer: MAS Created: 2009 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 57709 h Spindle hours: 47727 h Table diameter: 520 mm Maximum table load (even): 400 kg Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 8000 1/min Mechanical feed length axis X: 900 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 480 mm Cone: ISO 50 Number of tools: 40 pieces Tool diameter: 125 mm Max. tool weight: 15 kg Machine height: 3300 mm Machine length: 4600 mm Machine width: 3600 mm Machine weight: 13 t 2020: new spindle

Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

Key data: 750 mm, 500 mm, 600 mm

Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis

x-travel: 2000 mm y-travel: 600 mm z-travel: 500 mm table surface area: 2500 x 650 mm spindle taper: SK 40 control: HEIDENHAIN, TNC 426 ATC: 36 Pos total power requirement: 60 kW weight of the machine ca.: 7,5 t - with coolant through spindle - Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant - new spindle on X-axis in 2020 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table size 900x400 mm X Travel 750 mm Y, Travel 450 mm Z Travel 450 mm Spindle speed 12.000 rpm Controller Siemens 840D Sl Spindle taper SK40 Number of tools in magazine 24 Can be tested under power

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

TOS W 75

BFT 90/3 SPINDEL 102 , ISO

Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)

This 3-axis POSmill C 800 Kompakt was manufactured in 2017. It features a nominal power of 25 kVA and a net weight of 6,800 kg, making it a robust option for various machining tasks. The machine is equipped with a Heidenhain TNC620 control system, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the POSmill C 800 Kompakt vertical machining centre we have for sale. Contact us for further details.

Key data: 500 mm, 400 mm, 300 mm

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

This 5-axis DMG DMU 40 evo was manufactured in 2013. It features a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 60 tools. The working area measures 400 x 400 x 375 mm, providing ample space for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DMU 40 evo vertical machining centre we have for sale. Contact us for further details.

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

This 3-axis AWEA BM-1600 was manufactured in 2007. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a FANUC CNC control and has a robust table size of 2,000 x 800 mm. If you are looking to get high-quality machining capabilities, consider the AWEA BM-1600 vertical machining centre we have for sale. Contact us for further details.

x-travel: 750 mm y-travel: 750 mm z-travel: 725 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische ...

This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details.

This 3-axis DMG Mori Seiki NVX 5080 II/40 was manufactured in 2013. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a weight of 6350 kg and is equipped with a rated power of 34 kVA. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki NVX 5080 II/40 vertical machining center we have for sale. Contact us for further details.

This 3-axis FANUC ROBODRILL alpha-D21LiA5 was manufactured in 2015. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a weight of 2200 kg and is equipped with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL alpha-D21LiA5 vertical machining centre we have for sale. Contact us for further details.

X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008

This 3-axis MORI SEIKI NV 5000 alpha1 was manufactured in 2008. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine has a weight of 7300 kg and includes a central spindle cooling unit, along with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV 5000 alpha1 vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI DuraVertical 5080 was manufactured in 2008. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 500 mm. The machine has a robust weight of 6100 kg and includes a rotary/indexing table, which has been unused since new. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5080 vertical machining centre we have for sale. Contact us for further details.

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

Year of construction: 2019 CNC controller: FS-31iB (MAPPS IVB) Axes X-axis travel mm: 1540 Y-axis travel mm: 760 Z-axis travel mm: 660 Rapid traverse m/min: 20 Worktable Table dimensions mm: 1700x760 Max. workpiece weight kg: 2000 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 18,5/15/11 (10 min./30 min./cont) Spindle torque Nm: 81 (10%ED) Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 60 With free neighboring places mm: 125 With occupied neighboring places mm: 95 Max. Tool Length mm: 450 Max tool weight kg: 12 Tool-to-tool time s: 2.1 Equipment Electronic Handwheel Internal cooling lubricant supply Rinsing gun Signal lamp Tool measuring arm Mist collector Heat compensator Program restart Paper band filter Machine running times Under power: 35557 Spindle Working: 27278 Rated power kVA:  ...

EQUIPMENT: TENONNAGE: CARRIAGE WITH AUTOMATIC WORKPIECE TURNING CUTSAW SHAFT 1 TENONNAGE 620 MM WITH AUTOMATIC SPLINTER GUARD MULTI-FUNCTION ELECTRO-SPINDLE WITH 1 24-POSITION TOOL MAGAZINE SHAFT 2 TENONNAGE 620 MM WITH AUTOMATIC SPLINTER GUARD PROFILING: VERTICAL SHAFT 1 PROFILING 620 MM VERTICAL SHAFT 2 PROFILING 620 MM TOP HORIZONTAL SHAFT 150MM LOWER HORIZONTAL SHAFT 150MM VERTICAL SHAFT 3 PROFILING 150 MM GLAZING BEAD SAW WITH EXTRACTOR MOVABLE GUIDE FOR LEAF CALIBRATION AUTOMATIC UNLOADING TABLE PARTS TO OPERATOR RETURN BELT ALL SHAFTS ARE Y/Z DIGITIZED DIMENSIONS OF THE WORKPIECE Maximum length (with stop reference).. mm 3200 Minimum length (inner tenon)... mm 200 Maximum height mm 130 Minimum height. mm 30 Maximum width. mm 200 Minimum width. mm 30 Driving carriage speed... m/min 0-55 Profiling speed m/min 4-20 Roll forming table height mm 850 Roll forming machine t ...