centre lathe used for sale

This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information.

Auction-ID: A1-45752-14

Auction-ID: A7-45927-1

This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine.

excluding tooling; including 4th axle; equipped with updated 2018 CNC control with touch screen and software Auction-ID: A1-45793-14

This 3-axis Wele AA1165 was manufactured in 2014. A vertical CNC machining center featuring a Fanuc 0i-MC control, it offers X/Y/Z travels of 1,100 mm, 650 mm, and 600 mm respectively. Rapid feeds reach up to 24 m/min, with a spindle speed of 15,000 rpm. The table supports loads up to 1,100 Kg. Consider the opportunity to buy this Wele AA1165 vertical machining center. Contact us for more information about this machine.

This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details.

Specifications: Control: Haas NGC Hours: 1892 X-axis: 508mm Y-axis: 406mm Z-axis: 394mm Feedrate XYZ: 61m/min Table size: 660mm x 381mm Max. Table load: 113kg Spindle taper: BT-30 Spindle speed: 15.000rpm Spindle motor power: 29kW Positions on ATC: 20 Machine is equipped with: - chip conveyor - Renishaw / Haas OTS probe - Renishaw OMP 40-2 probe - through spindle coolant - prepared for 4th & 5th axis - extra coolant filter Auction-ID: A1-45752-9

This DMG ecoMill 800v was manufactured in 2016. It features an impressive X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG ecoMill 800v vertical machining centre we have for sale. Contact us for further details.

Milling head is defect and needs to be overhauled! Auction-ID: A1-45752-8

This 3-axis CHIRON FZ08W was manufactured in 2006. A vertical CNC machining center featuring a Fanuc 21i-M series control, it offers X, Y, Z travels of 300 mm, 250 mm, and 250 mm respectively. It includes a table size of 550 x 300 mm, a spindle speed of 10,000 rpm, and a 12-position tool magazine. Consider the opportunity to buy this CHIRON FZ08W vertical machining center. Contact us for more information.

This 5-axis DECKEL MAHO DMP60S was manufactured in 2003, featuring a vertical machining center with X, Y, Z travels of 760 mm, 460 mm, and 560 mm respectively. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine.

This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details.

Control: Fanuc 0i-MD Cutting time: 2011 hours - X-axis: 1000mm - Y-axis: 550mm - Z-axis: 500mm - Spindle distance to table: 130 ~ 630mm - Table size: 1100mm x 502mm - Max. part weight: 700kg - Spindle speed: 10.000 tpm - Spindle taper: BT-40 - Spindle motor power: 11kW - Positions on tool magazine: 24 Auction-ID: A1-45752-18

This 3s DMG MORI DMC 1035 V ecoline was manufactured in 2012. It features travels of 1035 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis, with a spindle speed range of 12,000 rpm. The machine includes a 20-station tool magazine and an internal coolant supply. Consider the opportunity to buy this DMG MORI DMC 1035 V ecoline vertical machining centre. Contact us for further details.

Machine is equipped with: - 24 position ATC - Renishaw Haas OTS probe - Chip conveyor - Through spindle coolant - Programable coolant nozzle - Stairs Auction-ID: A1-45752-3

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

Auction-ID: A1-45752-15

This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details.

This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details.

This 4-axis TAJMAC-ZPS H40 TREND was manufactured in 2004. It features a rotary table and two-pallet automatic changer, enhancing productivity and flexibility. The machine accommodates a maximum workpiece size of dia 600 x height 600 mm and supports up to 300 kg. Ideal for complex machining tasks, it includes a high-pressure cooling system and a laser tool probe. Contact us for more information about this machine.

This 3s Huron VX8 DNU was manufactured in 2019, featuring a table size of 1,000 x 530 mm and a load capacity of 500 kg. With an X-axis travel of 820 mm and a rapid traverse speed of 24,000 mm/min, it offers efficient machining capabilities. Consider the opportunity to buy this Huron VX8 DNU vertical machining centre. Contact us for further details.

X-axis: 2500mm Y-axis: 920mm Z-axis: 820mm Machine is equipped with: - chip conveyor - through spindle coolant 40 bar - coolant filtration system - 30 position ATC Auction-ID: A1-45752-5

This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details.

Machine is equipped with: - chip conveyor - through spindle coolant - 30 positions ATC - Nikken 4th& 5th axis Auction-ID: A1-45752-19

This 3s Takumi V12s vertical machining centre was manufactured in 2022. It features a robust table size of 1,250 x 650 mm and a maximum load capacity of 1,200 kg, making it suitable for various machining tasks. With a spindle speed of 12,000 rpm and rapid feed rates of up to 24 m/min, it offers efficient performance. Consider the opportunity to buy this Takumi V12 vertical machining centre. Contact us for further details.

This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details.

This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.

This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details.

4TH AXIS! Machine is equipped with: - 4th axis - through spindle coolant - oil chiller - chip conveyor - Renishaw probe system Auction-ID: A1-45752-6

This 3-axis KOVOSVIT MAS MCV 800 QUICK was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 550 mm. The machine includes a robust table size of 1000 x 500 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 800 QUICK vertical machining centre we have for sale. Contact us for further details.

Auction-ID: A1-45752-16

This 3-axis Hurco VMX1 was manufactured in 2004. It features a maximum spindle speed of 10,000 rpm and a cutting feed rate of up to 11,400 mm/min. The machine has a table size of approximately 760 × 355 mm and offers a tool changer with 16 stations. If you are looking to get high-quality milling capabilities, consider the Hurco VMX1 vertical machining centre we have for sale. Contact us for further details.

5 axis simultaneous! Machine has low hours and costed €375.000! Range: X-axis: 900mm Y-axis: 700mm Z-axis: 610mm B-axis: +120° ~ -120° C-axis: 360° Rotary table: Drive: direct drive build-in on both axes Table size: 400mm x 400mm Max. Workpiece size: ø630 x 540mm Max. Table load: 500kg Table to spindle nose: 60~670mm Angular encoder: Heidenhain RCN (A- and C-axis) Spindle: Type: HSTec HM-15A (Built-in motorized spindle) Spindle taper: HSK-A63 Max. Spindle speed: 15.000rpm Spindle power: 51 kW (S6-25%) Max. Torque: 162Nm Tool magazine: Capacity: 90 positions Max. Tool diameter: 76.2mm ( 125mm with adjacent positions empty) Max. Tool length: 300mm Control: Manufacturer: Heidenhain Model: TNC 640 with 19” touchscreen Linear scales: Heidenhain (X, Y, Z axes) Machine details: Year of construction: 2020 Floor space: 4810 x 3920mm Machine height: 3520mm Machine is equippe ...

This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It features a Heidenhain iTNC 530 control, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine offers a tool magazine with 32 positions and a robust coolant system with a 280-liter capacity. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 70 eVo machine we have for sale. Contact us for more information about this machine.

Control: Mazatrol Smooth X Hours: 11019 X-axis: 350mm Y-axis: 550mm Z-axis: 510mm A-axis: -120° ~ +30° C-axis: 360° Rapid feedrate: 30m/min Table size: 500mm x 400mm Max. Workpiece weight: 200kg Min. / max. Height under spindle: 50 ~ 560mm Spindle taper: SK-40 Spindle speed: 12.000 Spindle motor power: 11Kw Positions on ATC: 30 Machine is equipped with: - Chip conveyor - Through spindle coolant - Renishaw RMP 40 probe - Digital user manuals Auction-ID: A1-45752-1

This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details.

Machine is equipped with: - Chip conveyor - Oil skimmer - Through spindle coolant Auction-ID: A1-45752-17

This 3s HAAS VF-2SSYT CNC Vertical Machining Center manufactured in 2024 features a maximum spindle speed of 12,000 rpm and a robust tool changer with a capacity of 30+1 tools. The machine has been lightly used and is in excellent condition, offering travels of 762 mm in the X-axis and 508 mm in both Y and Z axes. Consider the opportunity to buy this HAAS VF-2SSYT vertical machining center. Contact us for further details.

This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine.

This 3s DMG DMC 635 V vertical machining centre was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful spindle with 18.5 kW. The machine has a working area with a table dimension of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMC 635 V machine we have for sale. Contact us for further details.

This 5-axis MORI SEIKI SH8000/5AX was manufactured in 2002. Fully overhauled in 2016, it features a Fanuc 16iMA control, a spindle speed of 10,000 rpm, and a tool magazine with a capacity of 150 tools. The machine has a pallet size of 630 × 630 mm and a loading capacity of 1000 kg. If you are looking to get high quality milling capabilities consider the MORI SEIKI SH8000/5AX machine we have for sale. Contact us for more information.

This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19 LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information.

This 3-axis Mazak VCS 530C vertical machining centre was manufactured in 2014. It features a table size of 1300x550 mm, X/Y/Z travels of 1050/530/510 mm, and a maximum spindle speed of 12000 min⁻¹. The machine supports a table load up to 1200 kg and includes a 30-tool magazine with a rapid tool change time of 2.8 seconds. Consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information about this machine.

This 3-axis Optimum Optimill F150 was manufactured in 2017 and features a Siemens Sinumerik 828D control system, a vertical spindle type SK40 with a speed range of 10-10,000 rpm, and a carousel tool changer with a 16-tool capacity. It supports a maximum table load of 350 kg and includes a screw-type chip conveyor. If you are looking to get high-quality milling capabilities, consider the Optimum Optimill F150 machine we have for sale. Contact us for more information.

This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information.

This 3-axis VICTORY VC F76 vertical machining center was manufactured in 2021. It features Fanuc Series Oi-MF Plus control, with axis traverses of X-760, Y-500, Z-510, and rapids at 32m/min. The table size is 840x500, supporting a 500 kg workload, and it includes a 24-tool magazine. Machine weight is 5260 kg. If you are looking to get high-quality milling capabilities, consider the VICTORY VC F76 machine we have for sale. Contact us for more information.

This 3-axis HAAS VF-6SS was manufactured in 2014, featuring a robust direct-drive spindle with a 22.4 kW motor and a maximum speed of 12,000 rpm. It supports a table load of 907 kg and includes a side-mount tool changer with a 30 + 1 tool capacity. Ideal for high-precision machining with rapid feed rates up to 30.5 m/min. If you are looking to get high-quality milling capabilities consider the HAAS VF-6SS machine we have for sale. Contact us for more information.

This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information.