centre lathe used for sale

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

Manufacturer: Homag, Type: 20/50/16/V/G, Year: 1998, Control: Homag, Program: WoodWop , Program version: 5.0, Working range X: 5.600, Working range Y-axis: 1.600, Working range Z: 60, Number of milling spindles: 1, Milling engine 1 hours power: 12, Number of tool magazines: 1, Number of tools per tool-magazine: 12, Vertical drills-X: 5, Drill vertical Y: 4, 2 station allocation: 2, raster table: yes, Vacuum pumps Qty: 2, Saw unit: yes, Edgebanding unit: yes, Year :1998

Manufacturer: IMA, Type: Bima 600, Year: 1993, Control: NUM 760, Working range X: 3000, Working range Y-axis: 1200, Working range Z: 250, C axis: no, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 5, Stops in the table rear: yes, Number of tables: 1, Traverse table: yes(Rolle), Vacuum pumps Qty: 2 X 80, Tool clamping system: vakuum, Year :1993

Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004

DMG DMC70H year 2007 Hours in picture he 2007 Deckel Maho DMC 70 H is a horizontal machining center produced by DMG (Deckel Maho Gildemeister), a renowned German manufacturer known for high-quality CNC machining centers. Here are the key details about this model: Key Specifications: - Type: Horizontal Machining Center - Year: 2007 - Table Size: Usually features a pallet size of 630mm x 630mm, though this can vary based on the setup. - X-Axis Travel: Around 700 mm. - Y-Axis Travel: Around 800 mm. - Z-Axis Travel: Around 800 mm. - Spindle Speed: Can reach up to 18,000 rpm, depending on the specific configuration. - Spindle Motor: Offers robust power, typically around 35 kW (may vary based on options). - Automatic Pallet Changer: Often comes with an automatic pallet changer, improving productivity by minimizing downtime during setup. - High-Rigidity Design: Known for its rigid construct ...

Manufacturer: Weeke, Type: BP 195 T, Year: 1996, Throuh running machine: yes, Working range X: 3200, Working range Y-axis: 1300, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, r.p.m: 18000, r.p.m: 18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Rollentisch: yes, Vacuum pumps m³/h: 120, Bohrer vertikal: 44, Auslegermaschine : yes, zwei getrennte Bohrgetriebe mit einzelnen Achsen Raster 32 mm, Year :1996

Manufacturer: Böllhoff Laufschienenschraubautomat, Type: NC/A1/NC-VS-LS, Year: 1992, Steuerung : Programm, Working range X: 2000, Working range Y-axis: 600, Number of milling spindles: Schraubaggregat, Number of tools per tool-magazine: Stangenmagazin, Working widht max mm: 2000, Arbeitstiefe max mm: 600, Auslegermaschine : yes, Beschlagzuführung über Stangemagazin, Year :1992

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

DMG DMC 70 H year 2007 The 2009 Deckel Maho DMC 70 H is a horizontal machining center manufactured by DMG (Deckel Maho Gildemeister), which is a well-known German company that produces high-precision CNC (computer numerical control) machine tools. Hours in picture Find more here - / Contact us at -

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA

CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16  ...

CNC Model: Fanuc - CNC Version: 18i - TB - Main Spindle Nose: ASA 8 - Main Spindle Power: 26Kw Main spindle bar passage: 81mm - Turning diameter: 300mm - Turning length: 350mm - Main spindle speed: 3500 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 255mm Y-axis travel first turret: +- 60mm First turret Z-axis travel: 800mm Number of second turret tool positions: 12 Number of motorized second turret: 12 Second turret X-axis travel: 190mm Second turret Z-axis travel: 900mm Fast feeds for linear axes X Y Z: 24m/min Sub-spindle: yes Spindle nose: ASA 8 Number of counter-spindle speeds: 3500 Counter spindle power: 26Kw Bar Passage: 81mm Z stroke sub-spindle : 810mm Chip conveyor: belt Presetting: yes Machine equipment: Machine supplied wit ...

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

For Sale: 2008 Deckel Maho DMC 70 H duoBLOCK Horizontal Machining Center - Year: 2008 - Make/Model: Deckel Maho DMC 70 H duoBLOCK - Type: Horizontal CNC Machining Center - Control: Siemens 840D - Features: - duoBLOCK design for high rigidity and precision - 5-axis capability - Automatic tool changer - High-speed spindle - Coolant system - Condition: Good, fully functional, under power Find more here - / Contact us at -

Takumi H16 Machining Center :::TECHNICAL SPECIFICATIONS::: CNC model: Fanuc - CNC version: 18i MB - Tool holder: iso 40 - Spindle speed: 16000 Number of tools: 26 - X-axis travel: 1600mm - Y-axis travel: 1300mm - Z-axis travel: 700mm Fast feeds for linear axes X Y Z: 24m/min Table dimensions: 1900 x 1300mm Table capacity: 8000Kg Gantry type: Gantry with fixed upright moving table Chip conveyor: belt Presetting: yes Machine equipment: spindle overhauled in May 2024 :::D DIMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 3700mm

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 18-T Main spindle nose: ASA 11 Main spindle power: 37Kw Main spindle self-centering diameter: 450mm Main spindle bar passage: 117.5mm Turning diameter: 650mm Turning length: 1575mm Number of tool turrets: 1 Number of fixed tool positions for the first turret: 12 First turret X-axis travel: 370mm First turret Z-axis travel: 1575mm Tailstock: yes Steerer stroke: 150mm Chip conveyor: belt :::D DIMENSIONS AND WEIGHT::: Length: 4930mm Width: 2460mm Height: 2587mm Weight: 13690Kg

Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

Key data: 3060 mm, 1260 mm, 150 mm

SPECIFICATIONS: Workspace: X: 3060 mm Y: 1260 mm Z: 150 mm 03 Axles Automatic lubrication system 06 ATS tables (length: 1200 mm) 018 Track rollers 06 rear stops 06 stops at height 970 mm Side stops (2 right + 2 left) 04 Bar lifter Turret tool magazine with 10 places 01 Drill head BH 21 L (7x+7y vertical - 4x+2y horizontal - x-axis knife) 01 Air Cooled 12kw Electrospindle HSK F63 Coupling 01 Becker vacuum pump: 100 m³ SYSTEM: Biesse Works XP600 Controller EQUIPMENT: Carpets and barriers Various tools

Control: Heidenhain iTNC 530 Year of Make: 2009 Travel: X-axis: 650 mm Y-axis: 700 mm Z-axis: 700 mm B-axis: 360 C° Recording: 40 ISO Tool magazine: 120-fold Speed: 12,000 rpm Conveyor Coolant system with filter 600 L and 40 bar 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser New Weiss spindle in 2022

Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

Key data: 3000 mm, 920 mm, 50 mm

CNC Drilling Center C-Express Classic Drilling/sawing/milling from below Easy operation via graphical user interface 1 Machine Software License 19" LCD color display, mouse keyboard Machine weight 850kg Machine dimension: 2,100x1,500x1,950mm Milling spindle 3.3kW (S1), 24,000rpm Collet ER32 manual Drill Head DH 15 6H1S 9 vertical drilling spindles 6 hotizontal drilling spindles 1 grooving saw X direction More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: Infinite, Regulating wheel speed nº: Infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dimensions of the regulating wheel (OD x ID x W): 305 x 190.5 x 254 mm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Power hydraulic motor: 0.55 Kw., Hydraulic motor power: 0.55 Kw., Total power: 27 Kw., Voltage: 220/380V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Tall: 1.900 mm, Weight: 6.420 Kg.

Mazak QTN 350M x 1200 Motorized Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: FUSION 640 T NEXUS Main spindle nose: ASA 8 Main spindle power: 22Kw Main spindle bar passage: 76mm Turning diameter: 420mm Turning length: 1173mm Number of main spindle speeds: 3300 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm First turret Z-axis travel: 1240mm Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3450mm Width: 2050mm Height: 2000mm Weight: 7500Kg

overhauled: 2024 Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling... 20bar ISO 40 L x W x H ... 2700x3000x2940mm Machine weight... 5500kg Magazine spaces ... 20 The machine has undergone a complete overhaul. More info on request.

HEDELIUS BC 40 MACHINING CENTER - X 1600 mm - Y400 mm - Z 400 mm SK40 HEIDENHAIN control system

Make: Tos Machine No: F641 Type SPEEDtec CNC brand Siemens CNC type Sinumerik 840D Year of construction 2009 X 1,250 mm Y 1,000 mm Z 600 mm Mounting HSK 100 Motor power 25 kW Speed 12000 RPM Tool Changer Number of pallets 4 Outgoing Aries Including manuals Maximum speed 12,000 RPM Maximum pallet load 4,000 kg Chip transport Magazine slots: 2x 40 , HSK 100 4 tables, 1x 1,000 x 1,250mm / 3x 1,000 x 1,000mm

Key data: 1600 mm, 1600 mm, 1200 mm

Brand : OKK Type: VP1200 CNC Brand: Fanuc CNC Model: 160is-MB Year of Make: 2004 Table length: 1,600 mm Table width: 1,300 mm X: 1,600 mm Y: 1,300 mm Z: 550 mm Projection: 560 mm Tool Changers: 40 Minimum speed: 100 RPM Maximum speed: 12,000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2,000 kg Further information can be found in the pdf file Machine size: 5,800 x 3,200 x 2,800 mm Machine weight: 16,000 kg

Key data: 500 mm, 450 mm, 400 mm

Brand DMG Mori Seiki Machine No: F652 Type DMU 50 Ecoline Control Siemens 840D Year of construction 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle Taper SK40 Minimum speed 20 RPM Maximum speed 10,000 RPM Maximum table load 200 kg Chip transport Machine size 3,400 x 2,500 x 2,200 mm Machine weight 4,700 kg Magazine slots: 30 B-axis: +110/-5° C-axis: 360° Engine power: 13/9 Kw

Key data: 635 mm, 510 mm, 460 mm

Brand DMG Mori Seiki Machine No: F666 Type DMC 635 V Ecoline Control Siemens 840D Year of construction 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle Taper SK40 Maximum speed 12,000 RPM Chip transport Machine size 3,400 x 2,400 x 2,800 mm Machine weight 3,950 kg Magazine slots: 30

CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of Make: 2017 Travel: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Manual swivel of the milling head: -5° / + 95° Round table top: Ø 400 mm Centering hole: Ø102 H7 A-axis (swingarm): +/- 30 s C-axis rotary table: +/- 10 s Swivel range A-axis: -120/-95° C-axis rotation range: 360° rotation Mount: SK 40 DIN69871 Tool magazine: 60-fold Spindle speed: 1 – 12,000 rpm Accessories - Coolant system - IKZ with high-pressure pump - Electronic handwheel -Conveyor - 3D probes

Grinding wheel dimensions (od x id x width): Ø350 x 125 mm, Ø min/max to be rectified: 1.5 - 50 mm, Regulating wheel dimensions (od x id x width): Ø220 x 125 mm, Grinding wheel width: 125 mm, Maximum length to be rectified in plongeé: 120 mm, Grinding wheel head motor power: 10 HP, Total power: 8,5 Kw, Weight: 1.500 kg

The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance unknown, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg, Power connection: 200-240V, network connection: Ethernet, software: EOS RP Tools (optional), EOSPRINT, laser: Yb-Fibre Laser 100W, scanner: High-speed scanner, F-Theta lens, scanning speed: up to 7.0  ...

Vertical machining center DOOSAN DNM 650, control system FANUC

Key data: 3000 mm, 800 mm, 720 mm

Travel X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Rapid traverse X/Y/Z: 50 m/min B/C: 50/25 rpm Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 DIN69781 Tool magazine Mazak Tool Hive System Number of tool positions: 155 More options Air blowing out on the workpiece High pressure 15bar through the spindle Mazak Monitoring B (Renishaw RMP60) Tool Length Measurement x2 Table Center Partition NC rotary table, 360,000 positions, diameter: 1,000 mm Conveyor 5-axis simultaneous machining package Drilling cycle with torque-dependent chip breaking B) Cylinder interpolation B) Rapid Traverse Constant Tilt Angle B) Milling spindle synchronized tapping

Key data: 1050 mm, 900 mm, 980 mm

Mazatrol Smooth G Travel X-axis: 1,050 mm Y-axis: 900 mm Z-axis: 980 mm Distance spindle nose to pallet center 100-1,080 mm Distance from spindle centerline to pallet surface 100-1,000 mm Pallet Changer – Palletech 6 pallets Pallet size: 630 x 630 mm Setup station NC rotary table 360,000 Items Milling spindle Drive power 30 kW Max. spindle speed 8,000 rpm Tool magazine 160 tool positions BT-40 More options Tool length measurement Synchronized Threading Detachable handwheel Coolant system and chip conveyor Conveyor 70 bar high pressure pump separate tank with filter

Key data: 630 mm, 620 mm, 710 mm

ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.

Key data: 1060 mm, 620 mm, 620 mm

Vertical CNC Center YANG type MV 1060 Year of construction: 2006 Travel X: 1060 mm Travel Y: 620 mm Travel Z: 620 mm CNC FANUC Oi-MC Spindle speed: 8000 RPM Table size: 1180 x 560 mm Tools store: 24 tools Spindle motor: 11 kW Voltage: 380 V Weight: approx 6,5 T

Key data: 3414 mm, 1313 mm, 200 mm

SCM Tech99L Processing

Vacuum pump Becker Rotary Vane Vacuum Pump Type KVT 3.100 Item no. B.153231g Built in 1999 Motor 3.0/3.6 kW Speed 1420 / 1700 rpm Pumping speed 100/120 m³/h Suction pressure/vacuum -900 mbar Dimensions 1000 mm x 450 mm x H 500 mm Shipping Dimensions 1200 mm x 800 mm x H 700 mm Weight with pallet 120 kg

Beam cutting center STROMAB CT800 Beam cutting center with large cross-sections, making it an optimal solution for carpentry and frame construction. Thanks to its electronically controlled 5-axis technology, it meets all requirements for straight, tilt and complex cutting. It guarantees maximum processing speed and finished product quality, reducing labor and maximizing production. The CT800 can process beams of any length and cross-sections from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilted upper hold-downs Specification:. Motor Power: 18 kw TCT Disc: 800mm Number of electronically controlled axes: 4 Table saw rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Dial angle: 90° ÷ 45° Positioning Speed: 0 ÷ 17 mt./min Cutting range: . At 90° with single stroke: mm. 280×290 / 250×390 / 200×450 At 90 ...

Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor

SCM Morbidelli m90 3115 x 1320 mm Z180 Electrospindle HSK 63 9.5 kW - 13Hp Tool Changer FAST14 Tool Changer TRB11 Suction hood for electrospindle 3 - 4 axes Drilling unit RO. AX F23L Pressure booster in the Z-axis 6 "TV FLEX" work tables 1300 4 Device for loading aid H= 75 x1300 12 Fixed suction cup 145x145 mm H=75 mm 4 rotatable suction cups 145x50mm H75mm Laser device for positioning the Teat Pro-Space Guards SCM eye-M console with integrated PC Machine Operator Interface Software Maestro cnc Human-Machine Surface Software (HMI) Maestro Active "TECPAD" remote control with 7" touchscreen screen Vacuum pump capacity 90/108 m³/h

2001 Hurco VMX40 Technical data: - Ultimax 4 control - network card - DXF software - Tool changer 24 places - SK40 holder - Spindle speed 10-10,000 rpm - Chip conveyor - Operating hours 5279 Travels: - X-axis 1,020mm - Y-axis 510mm - Z-axis 610mm Find more here - / Contact us at -

Fully automatic timber feed with feed roller conveyor Extension of the feed cross conveyor and feed roller conveyor for timber lengths up to 13 m Feed and feed cross conveyors Under-table swivel cross-cut saw Universal milling unit 4-axis (UF4) Combined support for vertical tools Drilling rig 2.2 kW Combined support for horizontally working tools Drilling rig 2.2 kW Longitudinal and transverse groove milling machine Rear marking device (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for timber conveying incl. extension (without drive) Component ejectors Wooden shelf 5-arm Safety devices and enclosures