126,668 used machines on RESALE, but how to find them? Machine Search
Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - / Contact us at -
Manufacturer: Chiron Model: FZ 08K S Magnum SK Year of Manufacture : 2007 Type of Machine : Vertical Machining Center Factory overhaul: 2017 (Chiron CMS) Operating hours: approximately 22,500 h CNC control: Siemens 840D (PCU 20 / NCU 572.4) Spindle: water-cooled motor spindle, 15,000 rpm Spindle last replaced: September 2025 Last major service: October 2025 (Chiron, 4,000 h interval) NC swivel head swivel range: -20 degrees / +115 degrees Travel X / Y / Z: 450 mm / 270 mm / 310 mm Rapid traverse X / Y / Z: 75 m/min Acceleration X / Y / Z: 1g / 1.5g / 2g Tool positions: 40 x HSK-A 40 Chip-to-chip time: 2.6 seconds vertical (DIN) --------------------------------------------------------------- Equipment and Accessories Included Rotary table package AWU 160 with D105 mm (positioning axis) Hainbuch Spanntop collet chuck D100 6th side machining attachment Part removal hand ...
CONTROLS CNC controls HAAS WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 3048 mm Y-axis travel: 1016 mm Z-axis travel: 762 mm TABLE table surface (left-right): 3048 mm table surface (front-back): 711 mm SPINDLE / HEAD drive power: 15 kW tool fixture: ISO SK 40 TOOL MAGAZINE magazin type: disc magazine number of positions: 24 ELECTRICAL SPECIFICATIONS total power consumption: 15 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 6528 mm space requirements -front/back-: 3531 mm total height: 3105 mm total weight approx.: 15368 kg ATTACHMENTS autom. tool clamping: yes chip conveyor: yes coolant unit: yes ...
A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible.
A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible.
A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible.
serial number: 1068645 x-travel: 2080 mm y-travel: 812 mm z-travel: 750 mm : ja : ja internal cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: EWAG AG Model: Laser Line Ultra Machine type: 5-axis laser processing center Serial number: 7195-0022 Release: 5 Year of Make: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser classification machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating voltage: 3 × 400 VAC/N/PE Frequency: 50 Hz Control voltage: 24 V DC Rated current: 17.3 A Connected load: 12 kVA Max. fuse: 25 A (slow-blow) Electrical diagram number: 100211907 Extraction: ULT LAS 200 extraction system Documentation: fully available Operating hours: 3578802 h Note: Laser unit defective and needs to be replaced Robot is currently being expanded and is being overhauled, optionally available Viewing possible under power
Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change
Manufacturer: EWAG AG Model: Laser Line Ultra Machine type: 5-axis laser processing center Serial number: 7195-0022 Release: 5 Year of Make: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser classification machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating voltage: 3 × 400 VAC/N/PE Frequency: 50 Hz Control voltage: 24 V DC Rated current: 17.3 A Connected load: 12 kVA Max. fuse: 25 A (slow-blow) Electrical diagram number: 100211907 Extraction: ULT LAS 200 extraction system Documentation: fully available Operating hours: 3578802 h Note: Laser unit defective and needs to be replaced Robot is currently being expanded and is being overhauled, optionally available Viewing possible under power
Inv. Num. : 8973 Type: MCFV 1680 Producer: ZPS Created: 2010 Parameters: Work table length: 1800 mm Work table width: 780 mm X-axis travel: 1650 mm Y-axis travel: 810 mm Travel Z axis: 810 mm
- CNC wireless remote control - Zero-3 / 5-channel stepper motor drive - Base frame (movable on wheels) - Dell PC (with monitor, keyboard, and mouse) - WinPC-NC USB software (Version 2.50) - Accessories
Vertical BAZ MIKRON VC 500 with internal cooling 10 bar Year: 2001 Control: Heidenhain 430 TNC Operating hours: 3,300h Technical data: Spindle speed: 10,000 1/min Drive power: 13 KW Tool holder: SK 40 Number of magazine slots: 21 pcs. Travels: X-axis: 510mm Y-axis: 510mm Z-axis: 560mm Table size: 650x600mm Accessories: - IKZ with 10bar - Späneförderer - Electronic handwheel - Renishaw 3D button - Oil mist extraction - Rotoclear Machine was in a training company
Cutting center Type: TS 90 Manufacturer: Macmazza Year: 2019 Cutting length: 4300 mm Effective Cutting Height: 72 mm Motor power: 10 – 20 hp Main blade diameter: 220–325 mm Weight: 3500 Kg Dust extraction hood diameter: 2×120 mm 2×100 mm Saw carriage advance speed: 3-50 m/min Saw carriage return speed: 30-120 m/min Pusher speed: 2-25 m/min Pusher return speed: 25-70 m/min Suctions: 4000 m³/h 2500 N/m² Label printer Machine in good condition, under power Find more here - / Contact us at -
A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.
Key data: 850 mm, 510 mm, 510 mm
General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of spindle stylus
Key data: 850 mm, 510 mm, 510 mm
General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes
Key data: 850 mm, 510 mm, 510 mm
General Manufacturer: Spinner Type: VC 850 Year of Make: 2022 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes
Manufacturer: MTcut Model: UE110-5A Type of Machine : 5-Axis CNC Vertical Machining Centre Power Supply: 400V / 100A / 70 KVA Compressed Air: 3/8 inch, 6-8 bar Coolant Tank: 120 litres Central Lubrication: R68 (ISO68) Hydraulic Oil: R32 (ISO32) Machine Weight: 9,000 kg Machine Bed: Cast Iron Travel and Work Envelope: - X Axis: 1,100 mm - Y Axis: 610 mm - Z Axis: 610 mm - B Axis (Swivel Head): -30 / +120 degrees continuous - C Axis (Rotary Table): 0.001 x 360 degrees - Spindle Nose to Table: 105 - 715 mm Spindle: - Speed: 14,000 rpm - Torque: 160 Nm - Power: 29 kW - Cooling: Water cooled - Tool Interface: HSK63 Swivel Milling Head: - Swivel Range: +30 / -120 degrees stepless - Speed: 11 rpm - Positioning Accuracy: 10 arc seconds - Max Holding Torque: 1,320 Nm - Drive: Siemens Torque Motor Rotary Table: - Diameter: 610 mm - Speed: 50 rpm - Positioning Accuracy: 15 arc seco ...
Traub TNL 20 – 9B Machine No. 11920182 Year of construction 2022 TX8i-s control (with Polyform / Helical / 19" multi-touch with gesture technology) Alternating operation: Use as a short or long-turning lathe Main spindle D20 (with 10,000 rpm) with C-axis Sub-spindle D20 with X/Z/C axis Tool carrier top X/Y/Z/H/B axis with 8 tool holders Tool carrier lower X/Y/Z/H axis with 8 tool holders Recirculating apparatus with 4 tool positions Cooling lubricant mist extraction and filter system Automatic CO2 extinguishing system Accuracy Package Tool breakage control device (Wkz beam above) Tool breakage control device (Wkz beam below) Hinge Belt Chip Conveyor Coolant system with 20 to 80 bar pump Charging magazine FMB Turbo 2-20 Sliding device for loading magazine Portal workpiece removal unit Workpiece conveyor belt
DMG MORI DMC 635 V Ecoline CNC machining center was built in 2014 in Poland by FAMOT Pleszew Sp. z o.o. The machine, designed for precision machining of workpieces, is the perfect solution for both unit and series production. The machining process is performed fully automatically by means of a reliable electro-spindle and tools taken from a 20-position magazine. Process stability, in turn, is ensured by an extremely rigid bed, which continuously eliminates any vibration and oscillation. All this is complemented by an easy-to-use HEIDENHAIN CNC control with many useful functions. The DMG MORI DMC 635V Ecoline CNC vertical machining center weighs 3900 kg. Technical specifications of the DMG MORI DMC 635 V Ecoline CNC milling machine - HEIDENHAIN TNC 620 CNC control with workpiece and machining 3D simulation - feed in the X/Y/Z axis: 635/510/460 mm - rapid traverse in the X,Y,Z axis: ...
MORI SEIKI NV5000 alpha 1B/40 CNC machining center was built in 2007 in Japan by Mori Seiki Co., LTD. The machine is designed for precision machining of heavy workpieces weighing up to 1200 kg. The machining process is performed fully automatically by means of a reliable spindle and tools taken from a 30-position magazine. High power and rotational speed of the spindle enable performing efficient roughing as well as finishing operations. The workspace, on the other hand, has been fully maximised to ensure the freedom of the performed operations. All this is complemented by an advanced FANUC CNC control with MAPPS interactive programming. The NV5000 alpha 1B/40 CNC vertical machining center is offered with an extensive range of equipment, consisting of, among others, cooling through the spindle, chip conveyor and high-pressure pump. The total weight of the machine is 7300 kg. Technical ...
CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device
x-travel: 850 mm y-travel: 500 mm z-travel: 500 mm taper: ISO 40 P.D.B. table-size: 400x1250 mm volt: 400 V Control: Heidenhain TNC 355 total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...
A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.
CNC Turning and Milling Center Okuma LT 2000 EX -MY 2pcs Control: OSP-P300L Year of Make: 2013 Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travels: W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) 2 tool turrets with 16 places each (all places driven) Equipment: - Chip conveyors - Paper belt filter system with high-pressure pump - 2x 3-jaw chuck Kitagawa - OGL gantry loader with approx. 5 kg load capacity - Stacking magazine 20 places - Touchsetter - Renishaw touch probe - Extraction system - Various accessories
A vertical CNC 3-axis gantry machining center POS is available. Travel X/Y/Z: 2050mm/1050mm/780mm, table dimensions X/Y: 2200mm/1000mm, max. table load: 3000kg, tool holder: HSK-63, tool stations: 60, speed: 18000rpm, rapid traverse: 30m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 6500mm/4200mm/3800mm, weight: approx. 20000kg, control: Heidenhain, spindle hours: 10375h. Including infrared probe, IKZ and Blum tool measurement. Documentation available. An on-site inspection is possible.
Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg
Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -
CONTROLS CNC controls SIEMENS 840 D SL WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 210 mm Y-axis travel: 270 mm Z-axis travel: 360 mm SPINDLE / HEAD spindle revolutions (max): 40000 /min tool fixture: HSK A40 TOOL MAGAZINE number of positions: 64 AUTOMATIC WORKLOAD EQUIPMENT workpiece manipulator: articulated robot number of store positions: 32 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 9000 kg ATTACHMENTS chip conveyor: yes coolant unit: yes band filtration unit: yes closed cabin: yes Operating hours: Spindle 1: 4050 h, Spindle 2: 11,114 h Internal cooling 70 bar Fanuc ...
CONTROLS CNC controls SIEMENS 840D SL 4.8 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 210 mm Y-axis travel: 270 mm Z-axis travel: 360 mm SPINDLE / HEAD spindle revolutions (max): 40000 /min tool fixture: HSK A40 TOOL MAGAZINE number of positions: 72 AUTOMATIC WORKLOAD EQUIPMENT workpiece manipulator: articulated robot number of store positions: 36 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 8500 mm space requirements -front/back-: 2500 mm total weight approx.: 6000 kg ATTACHMENTS central lubrication system: yes chip conveyor: yes coolant unit: yes &n ...
Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...
Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...
Manufacturer: Queser Model: MV 154 EL Year of Manufacture: 2012 Type of Machine : Machining Center - Low hours - Very good condition - Many tools Find more here - / Contact us at -
BMEI BV100 CNC vertical machining center was built in 2007 in China by BMEI CO., LTD. The machine is used for precision machining of workpieces with a maximum weight of 700 kg. The machining process is performed inside a large workspace, which has been fully maximised to ensure the freedom of performed operations. Inside it, there is a stable work table with a length of 1300 mm and a width of 610 mm and with five T-slots for quick and easy attachment of tooling. The spindle, driven by a high-powered motor, reaches a speed of as much as 15000 rpm and moves in three X,Y,Z axes with feeds of 1050 mm, 510 mm and 560 mm respectively. The capacious 21-position tool magazine, on the other hand, allows storage of a large number of tools with a maximum diameter of 160 mm. A short tool change time of just six seconds reduces machine downtime to a minimum. All this is complemented by an advanced FA ...
CORMAK MILL850 CNC machining center was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. The CORMAK MILL850 1000 x 500 is the perfect choice for precision machining of workpieces with a maximum weight of 500 kg. The machine is distinguished by the use of many well-proven components that guarantee reliability and long-term performance. The machining process is performed inside a large, fully illuminated workspace. This space has been fully maximised to ensure the freedom of the performed operations. The hermetic enclosure of the workspace prevents possible dangers, as well as keeping the work area clean. The hardened work table with a length of 1000 mm and a width of 500 mm enables secure fixing of workpieces without overloading the design. The spindle, driven by a high-powered motor, reaches speeds of up to 12000 rpm. A ...
CK 50 CNC turning center was built in 2022. This state-of-the-art, extremely efficient machine is used in both unit and series production. Workpieces with a maximum diameter of 570 mm and a length of 500 mm are machined by means of a reliable spindle and cutting tools taken from a 12-position turret. The spindle, driven by a high-powered motor reaches a speed of 4200 rpm and moves in two X,Z axes with feeds of 270 mm and 610 mm respectively. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the turning process. The CNC CK50 lathe has an inclined bed, which increases the stability of the design through better distribution of loads during machining. This solution reduces the risk of vibration and oscillation, thus increasing turning accuracy and giving the ability to perform more complex operations. It also makes it easier to evacuate the ...
Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...
Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...
Used machine Machine type: CNC turning and milling center Model No.: CTXgamma1250TC4a Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2020 #001348 Location: Germany Technical data - Main spindle as integrated spindle motor, ISM102 - Sub-spindle as integrated spindle motor, ISM 76 - tailstock function for the sub-spindle - C-axis and spindle brake (hydr.) - Chuck rinsing device of the main spindle, external - Absolute, direct displacement measuring systems X-'Y-'Z1-axis - Differential stress main spindle - 36-cavity tool disc magazine - Hinge belt chip conveyor - Coolant system 8/20/80 bar - Coolant supply through the sub-spindle - Coolant spray gun - Mechanical oil mist separator - Automatic work area door - Workpiece probes - Tool turret at the bottom This offer is subject to change and non-binding. Changes, errors and prior ...
Used machine DMU40eVo with EROWA Magazine Machine type: CNC machining center 5-axis vertical Model: DMU40eVo with EROWA Manufacturer: DMGMORI Control: CELOS Heidenhain TNC640 Year of Make: 2019 Location: Germany #001371 Options: -Motor spindle speedMASTER® HSK-A63 -Spindle speed 20-20,000 min-1 -NC swivel rotary table -Tool magazine 210 places -Scraper chip conveyor -Internal coolant supply (IKZ) paper belt filter 20-80bar -Advanced chip flushing -Blowing air through the center of the spindle -Rotating lens -Oil and emulsion mist separator mechanical - Infrared touch probe -Tool breakage detection TRS2 -Preparation 3D quickSET -Signal light, four-color -DMG MORI automation interface -Pneumatic control of the PowerChuck 210 zero-point clamping system -EROWA Robot Compact (ERC80) -Magazine:15x rack level PC210 with 3 pos. each = total 45 pos. Changes, Thi ...
Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...
Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...
From now on we can arrange the following services for you! ✔ CAD/CAM programming Experts support you in programming your components – from the simple 2D contour to complex 5-axis simultaneous machining. We work with market-leading CAD/CAM systems and optimize your programs for maximum efficiency. ✔ Cost-per-part calculation We analyze your components with regard to cost-effectiveness. Together we determine your unit costs and help you to make optimal use of the machine and processes. ✔ Feasibility studies Before purchasing, we check the technical feasibility of your applications. How to get Certainty that the machine meets your requirements and that your production is sustainable supported. ✔ Programming Training Our training courses are aimed at beginners as well as advanced learners and are individually tailored to Adapted to your requirements. How to en ...
Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
maximum number of results exceeded
please refine your search
