134,683 used machines on RESALE, but how to find them? Machine Search
Ø grinding wheel dimensions (od x id x width): Ø650xØ304.8x500 mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): 35 m / s, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/225 rpm, Dressing (auto / manual): Automatic CNC the two wheels, Diamond dressing speed: infinite 10/225 rpm, Lubrication (auto / manual): automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 6, Infeed (auto / manual): Automatic CNC, Regulating wheel dimensions (od x id x width): Ø355xØ203,2x500 mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Weight: 14,000 Kg machine + peripherals, Accessories included: Fairing, hydraulic work cap, hydraulic ruler / Machine casing, hydraulic cover of the grinding wheel, hydraulic workrest
Automatic wheel balancer, CNC gantry loader, electric hoist, cutting speed regulator, hydraulic lifting wheel grinder, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Speed 255 r.p.m., Diamond dressing speed: 255 r.p.m., Control type ((cnc / manual): CNC, Cnc brand: SIEMENS, Cnc model: 840D, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 14.000 kg, Accessories included: Automatic wheel balancer, CNC gantry loader, ...
Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible.
x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 8300 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis IMA BIMA/300/125/530 CNC processing center was manufactured in 2012. It features an extensive working range with an X-direction of 5300 mm and Y-direction of 1400 mm. The machine includes a powerful main spindle with a speed range of 0-24,000 rpm and a tool holder of HSK F63. If you are looking to get high-quality CNC machining capabilities, consider the IMA BIMA/300/125/530 machine we have for sale. Contact us for further details.
Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.
Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement.
Material Name: Oven Bottom Center Cover Material Brand: Generic Model: NIL Material Type: 2997mm Material Specification: 2997mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42
Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement.
Offered is a vertical three-axis machining center. Travels X/Y/Z: 1524mm/660mm/610mm, table: 1675mm x 660mm, spindle speed: 12000rpm, tool holder: SK40, tool changer: 24 positions, spindle hours: 1937h (spindle replaced 10/2019), chip disposal: scraper conveyor, control system: WinMax. Equipped with 3D probe Renishaw, scraper chip conveyor, coolant system, spindle cooler, coolant spray gun, chip splash protection enclosure, flushing system for chip removal, electronic handwheel, rigid tapping, DXF software, cooling air through spindle switchable. Weight: approx. 8400kg, overall dimensions X/Y/Z: approx. 4650mm/3470mm/3030mm. Inspection possible by arrangement.
Sheeter with centering belts Nanmak DS 760 Year of Make: 2022 Condition: Test Machine Belt speed infeed/outlet separately adjustable Roller speed adjustable Adjustable roller gap Belt width 76 cm Working length 172 cm Length per band 81 cm Band height from the ground: 108 cm Centering belt also available as 3 rows Flour shakers External dimensions (LxWxH): 172x110x150 cm
Key data: 800 mm, 600 mm, 500 mm
CNC Vertical - Machining Center HERMLE B 300 V With track control Heidenhain iTNC 530 Year of Make: 2014 Travel : X 800 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle IKZ 40 bar Scraper belt conveyor Tool measurement in the work area ( BLUM Laser ) Coolant Setup Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Control cabinet cooling unit ( RITTAL) Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions
200MM" 3 JAW CHUCK FITTED WITH REVERSIBLE JAWS Spindle bore 59mm The Haas control is simple to use and incorporates on screen toolpath verification, The control interfaces well with CAD-CAM ,we will help with setup if required.
Number of axes: 3, max. speed: 6000rpm, compressed air connection: 6-8bar, main motor power: 20HP, control system: Fanuc Series 18-M, weight: 12t, without documentation. An on-site inspection is possible.
Includes selection of BT30 holders and Digital tool Setter and 3d Haimler. Great machine, little use and always on aluminium. Can be seen running. 16 Position Arm type ATC and LNC Control (I have fusion 360 post as well.) Great machine for small workshop or as we had for home use.Table Size: 700x300 mmT-Slots (Number x Size x Distance): 3x14x100 mmMax. Table Load: 150 kgX Travel: 400 mmY Travel: 300 mmZ Travel: 380 mmDistance between spindle end and tabletop: 150-530 mmDistance between spindle and column surface: 358 mmBT30 10,000 RPM spindle.
Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement.
For sale is a high-quality CNC turning-milling center spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Sub-spindle powered tools Chip conveyor extensive tool package Technical data: Bar passage 77 mm 12-speed VDI50 turret Main spindle ASA 8 Sub-spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and sub-spindle Weight approx. 6000–7000 kg Nloc Egsy Uwmws S Rrgob
Inv. Num. : 9165 Type: VF-8/40 Producer: HAAS Created: 2016 Parameters: Operating hours: 4500 h Work table length: 1626 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 1626 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 11250 kg
CNC Lathe TAKISAWA TMM 250 M1 CNC Model Fanuc Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools
This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details.
This 5-axis FORMAT4 Profit H350 1630 was manufactured in 2018. It features a robust construction with a heavy-duty welded steel frame and dual-driven moving gantry. The machine offers an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. If you are looking to get high-quality CNC machining capabilities, consider the FORMAT4 Profit H350 1630 CNC processing center we have for sale. Contact us for further details.
X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...
This 5-axis FORMAT4 PROFIT H350 16.30 CNC processing center was manufactured in 2017. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. The machine is equipped with a powerful 12 kW spindle and a dual-driven gantry system, ensuring high precision and efficiency. If you are looking to get high-quality machining capabilities, consider the FORMAT4 PROFIT H350 16.30 machine we have for sale. Contact us for further details.
X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible.
CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of Make: 2007 Internal machine no. 60 Travels: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360° W-axis: 1,550 mm Max. turning diameter: 710 mm Mount: HSK 63 Total tool stations: 40 locations Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyors - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper tape filter system 500l - One Touch IGF
CNC turning and milling center Okuma Multus B400 1SC-1500 Control: OSP-P200L Year of manufacture: 11/2010 Internal machine no. 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40-fold Equipment: - Chip conveyors - 3-jaw chuck SMW KNCS-N-340-117 - Paper belt filter system ISF 540/6670 - One Touch IGF - Tailstock - Touchsetter
Key data: 800 mm, 590 mm, 480 mm
Inv. Num. : 9175 Type: MCV 1000 5AX Producer: MAS Created: 2012 Parameters: Switch-on hours: 35507 h Hours: 20417 h Table diameter: 520 mm Number of synchronized axes: 5 Maximum table load (uniform): 400 kg X-axis travel: 800 mm Y-axis travel: 590 mm Z-axis travel: 480 mm Equipment: Accessories
Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.
Key data: 1000 mm, 600 mm, 650 mm
Inv. Num. : 9176 Type: VCI-Q 1000 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Travel travel Z-axis: 650 mm Machine weight: 5500 kg Equipment: Accessories
surface area: 1168 x 508 mm max. table load: 1800 kg travel -x axis: 1016 mm travel -y axis: 508 mm travel -z axis: 508 mm spindle taper: SK40 spindle speed: 10000 U/min spindle capacity: 15 kW spindle torque max.: 99 Nm rapid traverse y/x/z axis: 28 m/min control: HURCO MAX5 total power requirement: 20 kW weight of the machine ca.: 4,15 t dimensions of the machine ca.: 3,7 x 3,3 x 2,5 m The machine is like new !, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1270 mm, 610 mm, 720 mm
Inv. Num. : 9177 Type: VCI-D 1270 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 600 mm Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine weight: 10500 kg Equipment: Accessories
surface area: 1321 x 610 mm max. table load: 1800 kg travel -x axis: 1270 mm travel -y axis: 508 mm travel -z axis: 508 mm spindle cone: SK40 number of spindle speeds: 12000 U/min spindle capacity: 15 kW spindle torque max.: 82 Nm rapid traverse y/x/z axis: 28 m/min control: HURCO MAX5 total power requirement: 21 kW weight of the machine ca.: 4,25 t dimensions of the machine ca.: 4,1 x 3,35 x 2,6 m the machine is like new!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Overhauled spindle Chiron FZ15KW HIGHSPEED CNC SIEMENS 840D X, Y, Z 550 x 400 x 425 Tools 48, HSK A63 DIN 69893 Spindle 12.000 U/min Rapids 60 m/min Pallet 2 x 660 x 400 mm Year 2001 Coolant through spindle Steel: max 36 mm / M24 Weight 8200 kgs Overhauled spindle. This machine can be inspected and tested in our warehouse. Mimu machine tools (Italy)
Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, ...
The machine is in good technical condition, testing is possible after prior agreement. 5-axis HSC machining center designed mainly for the production of molds, models, aircraft parts and large precision parts. Travels X/Y/Z 2700 × 1100 × 1400 mm Table 2000 × 2000 mm Table load capacity 12,000–15,000 kg Spindle speed up to 24,000 rpm Spindle power 34–45 kW Control FIDIA C20 Tool magazine 42–84 positions Clamping HSK 63A (some configurations HSK 100) Rapid traverses X 50 m/min, Y 40 m/min, Z 30 m/min Machine weight approx. 38–38.5 t Positioning accuracy X 0.006 mm, Y 0.005 mm, Z 0.004 mm
Horizontal panel saw with pressure beam Type: HPP 200/32/32 Manufacturer: Holzma Year: 2015 Avaílable: 10/2026 Cross section: 3200x3200 mm Optimization directly on the CADPLAN 4 saw - JUST IN TIME Large PICA II printer Two engines, main unit 13kw, pre-cut 1.1kw Package for cut-outs Grooving package Additional two-finger collet for the 175mm position 3x set of disc and pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
CONTROLS CNC controls. 3D MILLPLUS IT V600 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 500 mm Y-axis travel: 450 mm Z-axis travel: 400 mm TABLE table surface (left-right): 700 mm table surface (front-back): 500 mm workpiece load (max): 500 kg SPINDLE / HEAD spindle revolutions (min): 20 /min spindle revolutions (max): 10000 /min tool fixture: ISO SK 40 drive power: 13 kW AXIS DRIVES traverse velocity X (max): 24000 mm/min traverse velocity Y (max): 24000 mm/min traverse velocity Z (max): 24000 mm/min TOOL MAGAZINE number of positions: 30 tool diameter max.: 80 mm - with free neighbour positions: 130 mm tool length max.: 300 mm tool weight max.: 6 kg tool changing time: 8 s ATTACHMENTS European CE standards: yes No cooling system; the machine is connected to ...
control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
vertical CNC turning center, year 2013, CNC 840D. Used machine in good condition. More info & price on IndustrialBuyer.
Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 860 mm y-travel: 560 mm z-travel: 600 mm table-size: 1000x560 mm spindle turning speed range: 10000 U/min tool magazin:: 24 weight of the machine ca.: 6.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
vertical CNC turning center, year 2008, CNC 0i-TC. Used machine in good condition. More info & price on IndustrialBuyer.
vertical machining center, year 2010, CNC iTNC 530. Used machine in good condition. More info & price on IndustrialBuyer.
vertical machining center, year 2007, CNC 0i-MC. Used machine in good condition. More info & price on IndustrialBuyer.
horizontal machining center, year 2004, CNC 16i-MB. Used machine in good condition. More info & price on IndustrialBuyer.
The machine is in good technical condition, after prior agreement it is possible to test it. 25 micron filter, chip conveyor belt, cooling through the spindle center, pressure 300 psi, wireless probe for tools and workpieces, side tool changer, ISO 40 taper, 30+1 tools, synchronized thread cutting, rotary gauge, 1x clamping vice, 20x tool holders
The machine is in good technical condition, testing is possible by prior arrangement. Chip screw conveyor Programmable coolant nozzle Power failure detection module Remote control via rotary knob with color LCD display Direct thread cutting Spindle 15,000 rpm, ISO 40 taper, 30 hp (22.4 kW) vector drive, direct "inline" drive Renishaw intuitive wireless probe system 2x clamping vice 30x tool holder
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm
x-travel: 1050 mm y-travel: 570 mm z-travel: 510 mm Control: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 16,5 / 11 kW max. Torque: 141 Nm tool taper: BT 40 distance spindle /table: 150 - 775 mm work table:: table surface area: 1300 x 570 mm max. table load: 1000 kg tool magazin:: number of toolpositions: 40 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,2 sec change-time chip to chip: 3,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min workpiece height max.: 590 mm total power requirement: 40,9 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,5 x 3,1 x 2,98 m 3-axis vertical CNC machining center - Siemens 828D CNC control and workshop-oriented programming support Shop Mill - 40-tool tool changer (BT 40) - Bas ...
maximum number of results exceeded
please refine your search
