center used for sale

This Deckel Maho DMU 80T Vertical Machining Center was made in 2000 in Germany and has 18361 hours, of which 1849 are spindle hours. It is equipped with a DECKEL MAHO MillPlus control unit and has 3 axis. The machine has a spindle speed of 6300 rpm.

This Okuma MX45-VAE Vertical Machining center was manufactured in the year 1999 in Japan and has 18000 production hours. It is controlled by an Okuma OSP U100M control unit. The machine has a spindle speed of 12000 rpm.

This CHIRON DZ24 WM HS Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a Fanuc Series 31 i – MODEL B5 control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.

This Feeler VMP 30 Vertical Machining center was manufactured in the year 2020 in Taiwan and has 1100 production hours. It is equipped with a Fanuc Series Oi-MF control unit and has 3 axis. The machine has a spindle speed of 10000 rpm, is in very good condition and well maintained.

This Leadwell LCH-500 Horizontal Machine Center was built in the year 2006. It is equipped with a Fanuc Series 0i-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm and is in good condition.

This MAZAK VCN-530C Vertical Machining center was manufactured in the year 2020 in Japan and has 1440 spindle hours. It is equipped with a MAZATROL SmoothG control unit. The spindle has cooling through spindle (15 bar). It is in a very good condition with low spindle hours.

This Quaser MF 630C Vertical Machining center was manufactured in the year 2015 in Taiwain and has 4761 production hours. It is equipped with a SIEMENS Sinumerik 828D control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This HERMLE C 600 V Horizontal Machining center was manufactured in the year 1998 in Germany and has 29289 spindle hours. It is equipped with a HEIDENHAIN TNC 430 M control unit. It is included a Touch probe, a Tapping without compensating chuck and Tool life monitoring.

This Brother TC-32BN QT Vertical Machining center was manufactured in the year 2008 in Japan. It is equipped with a Brother CNC INTERFACE UNIT control unit and has 3+2 axis. The machine has a spindle speed of 12000 rpm. There are 2 units available.

This Heckert HEC500D XXL Horizontal Machining center was manufactured in the year 2010. It is equipped with a SIEMENS SINUMERIK 840D control unit. The machine has a spindle speed of 15000 rpm.

This HAAS UMC-500SS Universal Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS CNC control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This MAZAK NEXUS 4000-III Horizontal Machining center was manufactured in the year 2013 in Japan and has 59968 hours. It is equipped with a Mazatrol control unit and has 4 axis. The machine has a spindle speed of 18000 rpm.

This Okuma Genos M560R-V Vertical Machining center was manufactured in the year 2016 in Taiwan and has 7265 production hours, of which 1841 are spindle hours. It is equipped with an Okuma OSP-P300M-R control unit and has 3 axis. The machine has a spindle speed of 15000 rpm.

This Quaser MK603HPD Horizontal Machining Center from 2004 was built in Taiwan. It is equipped with a Fanuc Series 18I-MB control unit. This 4 axis machine can work with a spindle speed up to 15000 rpm.

This ELUMATEC SBZ 122 Universal Machining center was manufactured in the year 2005. It is equipped with an Elumatec E 550 control unit. The machine has a spindle speed of 21000 rpm and comes with a suction unit.

This DMG DMC 80 U duoBLOCK Universal Machining center was made in 2008 in Germany and has 28951 production hours, of which 14200 are spindle hours. It is equipped with a Heidenhain TNC 530 control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This TOS Optima Horizontal Machining center was manufactured in the year 2005 in Czech Republic and has 83171 production hours, of which 36511 are spindle hours. It is equipped with a HEIDENHAIN iTNC 530 control unit and has 4 axis. The machine has a spindle speed of 6000 rpm.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

This HAAS VF-7/40 Vertical Machining center was manufactured in 2014 in the United States. It is equipped with a HAAS control unit. The machine dispose of a 3 axis: X (2134 mm), Y (813 mm) and Z (762 mm). It is included a ATC Random tool changer with a tool station which has 24 positions.

This Kitamura Mytrunnion 5 Vertical Machining Center was manufactured in Japan in 2014. This 5 axis machine is operated through a Fanuc 30i model B control unit. This machine can work with a spindle speed range up to 20000 rpm and counts with a table size of 630 x 630 mm. Includes a tools magazine of 100 positions.

This DMG DMU 40 evo Vertical Machining center was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

This Deckel Maho DMU 50 Vertical Machining center was manufactured in the year 2005 and has 15380 production hours, of which 2870 are spindle hours. It is equipped with a SIEMENS SINUMERIK 840D control unit, SK 40 tool taper and has 4 axis (servo-driven rotary table).

This Feeler FMH-500 horizontal machine center was made in the year 2007 in Taiwan. The machine has a spindle speed of 10000 rpm and 2 changing pallet tables. Accessories included in the offer: laser tool gauge, through-spindle cooling, 10,000 revolutions, 2x tower.

This Deckel Maho DMC 65V Vertical Machining center was manufactured in the year 1999 in Germany and has 71146 production hours. It is equipped with a HEIDENHAIN control unit and has 4 axis. The machine has a spindle speed of 18000 rpm, is in good condition and well maintained.

This DMG DMU70 Vertical Machining center was manufactured in the year 2007 in Germany and has 45808 production hours of which 25900 are spindle hours. It is equipped with a HEIDENHAIN 530 control unit and has 3+2 axis. The machine has a spindle speed of 12000 rpm.

This HAAS VF-5/40TR Vertical Machining center was manufactured in the year 2018 in the United States. It is equipped with a HAAS control unit and has 5 axis (removable 210 mm 2-axis thumb rotary table). The machine has a programmable Coolant Nozzle; a multi-position nozzle that automatically directs coolant precisely at the cutting tool. It has a spindle speed of 8100 rpm.

This AXA DBZ Vertical Machining center was manufactured in the year 2008 in Germany and has 58513 production hours, of which 23672 are spindle hours. It is equipped with a HEIDENHAIN ITNC530 control unit and has 4 axis. The machine has a spindle speed of 6000 rpm, is in good condition and well maintained.

This HAAS VM3 Vertical Machining center was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 12000 rpm.

This STYLE MC 750 Vertical Machining center was manufactured in the year 2020 in the Netherlands and has 1156 production hours. It has 4 axis. The machine has a spindle speed of 8000 rpm. See the extract of the original order confirmation (EN) attached as PDF below.

This DOOSAN VCF 850LSRII Vertical Machining center was manufactured in the year 2022 in South Korea. It is equipped with a 3,000 mm X-axis travel and controlly by a FANUC 31iB5 Plus control unit. The machine has 5-axis with a spindle speed of 12000 rpm. It is like new as only operated for 758 cutting hours. The VCF series is a perfect solution for multi-purpose machining for supreme rigidity. Machine has CE Conformity. See photo and video gallery for more impressions.

This HWACHEON Vesta 1000 Vertical Machining Center was manufactured in the year 2015 and has 26247 total working hours, of which 4727 are spindle hours, the spindle was changed in 2022 and the new spindle hours are 400 working hours. It is equipped with a SIEMENS SINUMERIK 828D control unit. The machine has a spindle speed of 12000 rpm. It comes with measuring technology NC 4 Laser from Renishaw. The robot is not included with the machine but is also for sale.

This DMG DMU 105 MonoBlock Universal Machining center machine was manufactured in the year 2013 in Germany and has 24687 spindle hours. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit. It disposes of a scraper belt chip conveyor and a vertical chain magazine basic with 60 magazine slots. See original order confirmation (German) as PDF attached for more details.

This TONGTAI HA-500II Horizontal Machining center was manufactured in the year 2016 in Taiwan. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.

This DMG Mori DMU 50 Universal Machining center was manufactured in the year 2005 in Germany and has only 2,870 spindle hours (15,380h control on). It is equipped with a SIEMENS SINUMERIK 840D control unit and has 4 axis (X/Y/Z + servo rotary table). Next to a 16 tools magazine it will be delivered with: Measuring system X-Y-Z axis, air cooling, handwheel and second cabin door.

This Axile G6 Compact Vertical Machining center was manufactured in the year 2018 in Taiwan. It is equipped with a Heidenhein TNC640 control unit and has 5 axis. The machine has a spindle speed of 20000 rpm and the table has a diameter of 600mm.

This Droop & Rein FS 130 SKE Vertical Machining center was manufactured in the year 1978. It is equipped with a HEIDENHAIN iTNC 426 control unit and has 3 axis. The machine has a spindle speed of 31.5 – 1600 rpm. The machine was completely overhauled in 2022. See information about overhauling details in PDF (DE) attached. Contact us at any time for further questions.

This Ken Focus5 2022 Universal Machining Center was manufactured in the year 2017 in Taiwan. It is equipped with a HEIDENHAIN control unit and has 5 axis. The machine has a spindle speed of 24000 rpm.

with CNC control, Fabr. SIEMENS, type: 828D, chuck processing up to: 350 mm, center distance: 1200 mm, max. 4000 rpm, BMT turret with 12 tool positions and driven tools, autom. Part removal, bar machining with counter spindle, diameter: 75 mm, internal tool measurement, with autom. Rod bearings, Fabr. BREUNING, Type: ILS-MUK, Oil Mist Extraction, Chip Conveyor & Coolant Supply

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

This used 4-axis vertical machining center was manufactured in 2012, available from May 24. The Hurco VM 30 boasts dimensions of 2,830 x 1,800 x 2,580mm, and a weight of 4550 kg, with a spindle that has logged 18,513 hours. It features a 1,320 x 610 mm table clamping surface, a maximum table load of 540 kg, and rapid traverse speeds of 24 m/min in all X/Y/Z axes. The spindle speed ranges from 10 to 10,000 rpm, supported by a 20-position automatic tool changer. Discover the Hurco VM 30 machine we have for sale. Contact us for more details.

This 5-axis vertical machining center was manufactured in 2003. The HAAS VR-11 features extensive travel capabilities with 3050 mm in the X-axis, 1016 mm in the Y-axis, and 762 mm in the Z-axis, ensuring large-scale precision. Its equipped with a HAAS-based control unit for intuitive operation, a 15,000-rpm spindle for high-speed machining, and through-spindle coolant to enhance tool life and chip removal. Consider the HAAS VR-11 machine we have for sale for its advanced features and versatility. For more details, please contact us.

This DMG CMX 1100 V Machining center (vertical) machine was manufactured in 2018 in Italy. This machine has a table size of 1400 x 560 mm. The spindle operates at speeds up to 12000 rpm with a power output of 13 kW. It features a tool capacity of 30 tools and includes a Renishaw probe, optical scales, and tool presetting functionality. Contact us anytime for further information.

This 3-axis vertical machining center manufactured in 2012 features a DMG DMC 1035 v eco with Siemens 810 D ShopMill control system, capable of spindle speeds up to 10,000 rpm with an SK40 holder and cooling through the spindle at 12 bar. It includes a 30-tool magazine, chip conveyor, and paper belt filter, supporting a table of 1200 x 560 mm with a maximum load of 1,000 kg. It has approximately 10,500 spindle hours and comes with a measuring probe for both tool and workpiece. Consider the DMG DMC 1035 v eco machine we have for sale for precision and reliability. For more details, please contact us.

This HAAS EC-400 Machining center (horizontal) machine was manufactured in 2020. It includes two 400x400 pallets with M12 threads and centering holes, a main spindle speed of 15000 rpm, and 50 tool slots. Additionally, it features a Renishaw tool setting and zeroing system, internal cooling through the main spindle, a chip conveyor, and an internal camera system. Contact us anytime for further information.

We hereby offer this used Haas VM 2 vertical machining center from 2014, located in The Netherlands. This industrial powerhouse, featuring a cutting-edge Haas control unit, stands as a testament to efficiency and accuracy in metal machining. With a generous working area of 914 x 457 mm, the Haas VM 2 is tailored for diverse machining tasks. The robust 12000 rpm spindle speed, coupled with a formidable 22.4 kW motor power, ensures swift and precise machining operations. Technical specifications: Control unit: Haas X-Axis travel: 762 mm Y-Axis travel: 508 mm Z-Axis travel: 508 mm Rapids on X-Y-Z axis: 18 - 18 - 18 m/min Table length: 914 mm Table width: 457 mm Table load: 1361 kg Spindle nose to table: 610 mm Spindle speed: 12000 rpm Spindle taper: CT40 | BT40 | HSK-A63 Motor power: 22.4 kW Tool changer: 40+1 tools Dimensions: Length: 2600 mm Width: 2700 mm Height: 26 ...

CNC : Siemens 840D X-axis travel : 1450 mm Y-axis travel : 1100 mm Z-axis travel : 1300 mm Feed rates : 60000 mm/min Rapid traverse : 60 m/min Number of pallets : 2 Table dimensions : 800 x 800 mm 360.000 positions : Max. workpiece weight : 2000 kg Spindle speed : 6.000 rpm Spindle drive power : 50 kW Cooling through the Spindle Center : 80 Tool holder : HSK-A100 High pressure pump, filtration unit

X-axis travel : 900 mm Y-axis trave : 800 mm Z-axis travel : 1020 mm Feed rates : 50 m/min Rapid traverse : 50 m/min Number of pallets : 2 Table dimensions : 630x630 mm 360.000 positions : Max. workpiece weight : 1200 Kg Spindle speed : 6000 rpm Spindle drive power : 50 kW Cooling through the Spindle Center : 80 Tool holder : HSK-A100 Tool magazine slots : 137 Chip conveyor High pressure pump Filtration unit

This 5-Axis vertical machining center was manufactured in 2007. The Hurco VMX50 features a robust technical setup including X/Y/Z traverse paths of 1270/660/610 mm, a high-pressure cooling system (20 bar), IKZ, a chip conveyor, and a 40-position tool changer. Its equipped with a Kitagawa TT 251 rotary table for 5th axis operations, making it a versatile addition to any production line. The ULTIMAX 4 control unit ensures precision and ease of use. Dont miss the Hurco VMX50 machine we have for sale. Contact us for more details.

3-Axis vertical machine center manufactured in 2015, the ROMI D600 features a Siemens 828D CNC control system, enhancing precision and ease of use. Its spindle speed reaches up to 8,000 rpm with an ISO-40 taper, and a tool capacity of 20, supporting efficient operation. The worktable measures 840 x 500 mm, handling a maximum weight of 800 kg. Ideal for demanding tasks, it also includes a chip conveyor for hassle-free maintenance. Consider the ROMI D600 machine we have for sale for reliable and robust machining solutions. Contact us for more details.

Drilling and threading machining center. • MANUFACTURER: ROSSINI • MODEL: TR-3-TV • YEAR OF CONSTRUCTION: 1989.