center lathe used for sale

Inv. Num. : 9028 Type: SK 12 Producer: TOS Created: 1971 Parameters: Equipment: Accessories

working area: 1.000-5.700 mm workpiece diameter: 140-450 mm with swarf conveyor: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic lathe Genini TBK 70 Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool Max workable block 70×70 mm Min workable block 20×20 mm Max workable length 300 mm Min. working length 25 mm CE mark Net price

: neu : Bulgarien : 53750 € : 1015.88 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 tur ...

Automatic lathe Locatelli MK-CC 1200 Turning length 1200mm Automatic loading of scantling from the feeder 3 duplomatic knives floating on a template 3 top commuter knives Face drilling in material capability Modernized machine control in 2023

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-138

Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.

An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible.

vibratory feeder diameter range 3,5-10 mm total screw length 150 mm output - pieces/min 28 head dia. 24 mm max.

machine is already ready for transport and can be assessed on viewing day Auction-ID: A1-44905-27

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-26

tooling cabinet not included machine ready for transport Auction-ID: A1-44905-4

X-axis: 300 mm Y-axis: 120 mm Z-axis: 800 mm machine ready for transport and to be assessed on viewing day 9 loading meters needed in truck Auction-ID: A1-44905-94

machine is already ready for transport and can be assessed on viewing day Auction-ID: A1-44905-28

Max. turning Ø180 mm X-Axis 110 mm Z-Axis 300 mm Spindle bore 52 mm ATC / Revolver 12 Pinole taper 3 Mk Stroke pinole 40 mm machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-122

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-137

machine is already ready for transport and can be assessed on viewing day Auction-ID: A1-44905-30

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-88

Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Lathe, turning machine, lead screw lathe, lead screw lathe -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: VDF Heidenreich & Harbeck, Leadscrew and Feedscrew Lathe Type V3 -Machine bed: hardened -Turning length: 1700 mm -Turning Ø over bed: 500 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 57 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Bezel: 150 mm -Drive: 7.5 kW -Accessories: Keyless collet, tool holder, tools see photos -Dimensions: 1440/3370/H1515 mm -Weight: 2510 kg

Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm -Weight: 9.8 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened -Turning length: 1260 mm -Turning diameter over bed: 470 mm -Spindle diameter without bridge bed: 600 mm -Turning diameter over support: 280 mm -Spindle bore: Ø 55 mm Spindle speeds: 36 - 2000 rpm -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg

Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Rotation diameter over bed: 500 -Turning diameter over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x bezel, 7x Multifix tool holders, see photos -Dimensions: 1180/3050/H1345 mm -Weight: 1907 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Manufacturer: Mazak Model: Integrex 100-4 Year of Manufacture: April 2006 Machine Weight: 6,000 kg Find more here - / Contact us at -

Manufacturer: Biglia Model: B501 M Year of Manufacture: 1996 Type of Machine : Lathe CNC Control: GE Fanuc 0-T Turning Capacity - Maximum turning length: 500 mm - Maximum diameter over the bed: 520 mm - Maximum workpiece diameter: 68 mm - Maximum diameter per pass: 250 mm Spindle Specifications - Spindle bore: 80 mm - Spindle motor: 22 kW - Maximum spindle speed: 4000 rpm Axis Travel X-axis travel: 2105 mm Z-axis travel: 500 mm C-axis minimum programmable step: 0.001 degrees High-speed traverse: up to 80 rpm Turret and Tooling - Turret positions: 12 - Motorized tool positions: 6 - Motorized tool speed range: 50 to 3000 rpm - Motorized tool motor: 3.7 kW - Tailstock - Tailstock travel: 100 mm (automatic) - Tailstock taper: CM4 - Additional Equipment Included - Autoblok 210 BB chuck with hardened jaws - Filtermist FI4/8 fume extractor - Chip conveyor Machine Dimensions and  ...

Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement.

Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - / Contact us at -

Find more here - / Contact us at -

Find more here - / Contact us at -

2x2x2m 650 C and 1200 C PLC

Manufacturer: Pinacho Model: SP/250 Machine Type:Lathe Year of Manufacture: October 2002 CE marked Find more here - / Contact us at -

Machine 1 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2000 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: October 2018 Machine 2 - Manufacturer: Tornos - Type: DECO 10mm - Control: Fanuc ITA - Year of Manufacture: 2003 - Loading Magazine: LNS Tryton 112 Machine 3 - Manufacturer: Tornos - Type: DECO 7mm - Control: Fanuc ITA - Year of Manufacture: 1999 - Machine Number: T-63034 - Loading Magazine: LNS Tryton 112 - Electrically and mechanically overhauled: June 2019 General Condition - All machines are fully functional with no technical defects - All machines are currently running in a medical device production line Find more here - / Contact us at -

Offered is a CNC vertical turning machine - pick-up system. Chuck diameter: approx. 160mm - 200mm, swing diameter: approx. 270mm, travels X/Z: approx. 500 - 600mm/approx. 160 - 200mm, max. spindle speed: 6000rpm, tool carrier: 12-station turret, drive system: Siemens SIMODRIVE 611, hydraulic unit: available, coolant system: including pumps and filter (One Eye Ind. magnetic filter installed), hinged belt chip conveyor. Inspection is possible by appointment.

Rotating diameter on the bench: 630 mm Maximum turning diameter: 600 mm Maximum length between tips: 2,000 mm Bar passage: 100 mm Self-centering chuck:400 mm Spindle speed: 1,800 - 2,000 Low rpm Motor power:30 / 37 Kw Fanuc Engine Floor space: 5,500 x 2,300 Height: 2,200 mm Machine weight: Approx. 12,000 kg Auction-ID: A7-44885-6

HEMPEL CKE semi-auto lathe 20 Long. max 2000 mm, max Ø 250 mm. Manual/auto controls, longitudinal carriage, 3-jaw chuck. Robust construction for wood or metal turning, suitable for prod. average. Reliable and versatile machine. Auction-ID: A1-45443-35

Takisawa EX 310 M motorized lathe Turning Diameter: 350 mm Turning Length: 600 mm Bar Passage: 75 mm Spindle: 10\" (ASA 8) | 3,500 rpm | 18.5 kW Turret: 12 BMT motorized stations Rapid (X/Z): 20 / 24 m/min CNC: Fanuc 0i-TD Functions: Manual Guide i, cylindrical/polar interpolation Length approx. 2,850 mm Depth (width): approx. 1,750 mm Height: approx. 1,850 mm Total Weight approx. 5.200 kg Auction-ID: A7-44885-15

YOU-JI Vertical Lathe Model YV-320 E Fanuc Control Maximum Turning Diameter: 450 mm Self-centering diameter: 200 - 250 mm (8\" - 10\") X-axis travel (horizontal): Approx. 200 - 250 mm Z-axis travel (vertical): approx. 400 - 450 mm Spindle speed: Up to 3,000 - 4,000 rpm Total Machine Weight: approx. 4,500 - 5,000 kg Ground Clearance (W x D): Approx. 1,600 x 2,400 mm Total Height: Approx. 2,600 mm Auction-ID: A7-44885-22

FANUC control, complete with chip conveyor, manuals present Auction-ID: A7-44885-23

FANUC control, with chip conveyor Auction-ID: A7-44885-27