cement silo used for sale

Silo 3 m³ volume, payload 4.8 to, dead weight 980 kg Diameter 1750 mm, height 3450 mm Spout height approx. 1050 mm Outlet NW 250 Blow-in line, vent line Inspection cover NW 500 in silo cylinder Filling lid NW 500 in the silo roof Platform with vertical ladder

Minisilo 1.2 m³ volume, payload 2000 kg, dead weight 490 kg Dimensions 1200 x 1000 mm, outlet height 1100 mm Outlet flap NW 250, filling lid NW 500 in silo roof Crane eyelets, forklift pick-up shoes

Pressure silo 3 m³ volume, payload 4800 kg, dead weight approx. 1200 kg Diameter 1750 mm, stand dimensions 1700 x 1720 mm, Spout height 1200 mm / 900 mm Outlet flap NW 250, silo tip with ball valve DN 65 Filling lid NW 450 in the silo roof, Inspection cover NW 450 in silo cylinder Crane eyelets, forklift pick-up shoes Vertical ladder + platform

P393 - used approx. 45 m³ / 45.000 L polyester silo, GRP silo, with undercarriage, completely repainted. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Polyester / GRP Silo Manufacturer: Theodor Vanck GmbH Density DIN 1055: max. 1.4 Kn/m³ DIBT: Z-10.2.2-22 Dimensions: approx. Ø 3.00 m × H total 14.00 m / H GRP cylinder 9.00 m Undercarriage measured externally, i.e. incl. steel girder approx. D 2.56 m × W 3.96 m Undercarriage measured inside, i.e. without steel beam approx. D 2.16 m × W 3.46 m × H 3.70 m Other: Silo and undercarriage were repainted by us, see photos. All parts fit on a truck. Used polyester silo, cleaned, in good condition, former salt silo. Standing silo made of GRP, on load-bearing steel structure / undercarriage, dome on top of the roof, several inlets and outlets. Incl. ladder and railing on top of the silo, see photos. Th ...

Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line

2 Aluminum Exterior Silo approx. 30 cbm capacity Bulk density 1.0 t/m³ Ø 2,400 mm Height approx. 9,500 mm Silos stand on frames for sale Price on request Phone 0172 8345457

For sale are 2 well-preserved malt silos. In addition to the malt silo, the following equipment is also for sale: - Pneumatic conveying system - Bag filling - Lines to the dust collector and the dust filter -Scales Metrics:

Aluminum Silo Content Granules Height approx. 7,500 mm Ø 3,000 mm Inhlat approx. 35 cbm Bulk density 0.6 t/m³ for sale Phone 0172 8345457

VA outdoor silo Zeppelin-Reimelt last content Sugar Ø 4,000 mm Content approx. 175 cbm Discharge: vibrating floor, lock, etc. Jet filter on top Bulk density 1.1 t/m³ Ladder, entrance door, full detector, silo entrance see pictures Price on request or Send asking price Phone +49 (0)172 8345457

4 aluminium silos Ø 2,400 mm Height 17,530 mm Content 70 m³ Bulk density 0.85 t/m³ Vibra floor, sluice discharge, jet filter for sale Phone 0172 8345457

15,000 liter sugar tank/storage tank Characteristics: volume 15000 L Total length 4300 mm Cylinder length 3350 mm Total height 3600 mm diameter 2500 mm material V2A (AISI 304) 1.4301 Outside surface marbled Surface inside 2B=IIIC ground Design Horizontal Number of feet 6 Description MJ UNI-HIGH Tank crown: Inflow 2 mushrooms 2 x Cathedral Digital level measurement Floor slope 3% In front: Cone bottom Manhole 420 x 360 mm with magnetic safety device 2 x line connections - front and rear CIP Residual drain with butterfly valve DN 100 Below: 6 trumpet feet with domes - height adjustable on steel supports

22,000 liter sugar tank/storage tank Characteristics: volume 22000 L Total length 5500 mm Cylinder length 4500 mm Total height 3500 mm diameter 2500 mm material V2A (AISI 304) 1.4301 Outside surface marbled Surface inside 2B=IIIC ground Design Horizontal Number of feet 8 Description MJ UNI-HIGH Tank crown: CIP Management 3 x Connections In front: 2 sight glasses Manhole 470 x 400 mm Circuit Below: Residual drain pipe with disc valve 8 trumpet feet with domes - height adjustable on steel supports

3,800 liter rinsing milk tank/storage tank made of V2A Characteristics: volume 3800 L material V2A (AISI 304) 1.4301 Total height 2400 mm Cylinder height 1100 mm inner diameter 1850 mm Outside surface marbled Surface inside 2B=IIIC ground Design Vertical Number of feet 3 Description: MJ UNI-HIGH Topsoil: Flat floor with 3% slope threaded connector CIP ball Manhole Ø 540 mm vent nozzle Tank cylinder: 2 x Step Arches 2 x Disc Valve Underbody: Cone bottom drawn from outside to inside Residual Drain Pipe 3 solid feet

Stock number: D656, Litre: 100 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Diameter: Ø 60 mm., Motor: 1,1 kW - 380/420 Volt - 397 rpm., Manufacturer: BM Silo Ltd., Other: Product funnel with flexible screw

1.400 litre, Stock number: T2548, Litre: 1.400, Material: Aluminum, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On transport frame, Top: Plain, closed, Bottom: Conical, Tank cover: In the top, Ø 450 mm., Dimensions: L 1330 x W 1130 x H 1850 mm.

20.000 litre, Stock number: T1168, Litre: 20.000, Material: Steel 37, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On the shroud, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: With trapez plate, Tank cover: In the top, Inner diameter: Ø 2650 mm, Other: Cyclone in the top, vibrating conveyor and cell sluice in the bottom

30.000 litre, Stock number: T1561, Litre: 30.000, Material: Fiberglass, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: 6 pcs. legs, Top: Dished, Bottom: Conical, Inner diameter: Ø 3400 mm., Total height: H 5950 mm., Other: Filter in the top and sliding draught in the bottom.

11.161 litre, Stock number: T3620, Litre: 11.161, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On leg console, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Riveted aluminium, Tank cover: In the top, Ø 600 mm., Working temperature: + 80° C, Inner diameter: Ø 2060 mm., Manufacturer: AMS Technology, Year: 2010

5.000 litre, Stock number: T2225, Litre: 5.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: 3 pcs. leg console, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 450 mm, Inner diameter: Ø 1900 mm, Total height: H 3800 mm, Other: Vibration outlet in the bottom - 2 pcs. lifting eyes

11.161 litre, Stock number: T3619, Litre: 11.161, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On leg console, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Riveted aluminium, Tank cover: In the top, Ø 600 mm., Working temperature: + 80° C, Inner diameter: Ø 2060 mm., Manufacturer: AMS Technology, Year: 2010

A.Z.O. Indoor Silo System Round silo 4 x 4 tons in steel Control with Winback PC 100 kg scale for sale Price on request Phone 0172 8345457

1.000 litre, Stock number: T2294, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: 3 pcs. legs, Top: Open with strengthening ring, Bottom: Conical, Inner diameter: Ø 950 mm, Total height: H 3550 mm, Other: Screw outlet in the bottom

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](.germanplast.eu/listings/4115725-drying-system-for-vertical-mi xers), price options: size and shape bespoke to project

35.000 litre, Stock number: T485, Litre: 35.000, Material: Fiberglass, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On legs, Top: Dished, Bottom: Conical, Tank cover: In the top, Ø 600 mm., Working temperature: 30° C, Inner diameter: Ø 3300 mm. , Total height: H 5200 mm., Other: Max density 0,7, Year: 1989

Stainless steel tank

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3

TECHNICAL SPECIFICATIONS Number of silos: 3 pcs. (identical) Capacity: approx. 200 cbm/pc. Diameter: 6,500 mm Silo body height: 8,500 mm Cone height: 4,000 mm Total height: approx. 10,500 mm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - At the cone precipitation drainage

TECHNICAL SPECIFICATIONS Number of silos: 4 pcs. Number of lanyards: 2 pcs. COMPOSED OF - 3 loading silos of approx. 90 cbm each - Diameter: 5,800 mmm - Hot-dip galvanized steel substructure - 1 loading silo with approx. 115 cbm - Diameter 7,000 mmm - 1 pc. take-off tape, AA 21,500 / BB 800 mm - 1 piece loading conveyor, AA 18,000 / BB 800 mm - Discharge height: approx. 4.0 m - Incl. weighing system

TECHNICAL SPECIFICATIONS Description: Bulk Silo, Sand Silo Capacity: approx. 90 cbm Diameter: 6,000 mm Total height: approx. 8,500 mm Height of silo body: approx. 4,500 mm Discharge height: approx. 4,000 mm Support beam: 30x40 cm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - Suitable for truck loading

Various mixing and storage silos are available. 1) Stainless steel silo. 2) Stainless steel silo Zeppelin, year of construction: 1983, capacity: 32m³, friction angle range: 25°-45°, overpressure range: 5mbar-45mbar, max operating temperature: 50°C, bulk density: 0.6kg/dm³, silo height: 11250mm, silo diameter: 3000mm. 3) Stainless steel silo. 4) 3x identical HD-PE mixing silos, total height: approx. 10500mm, diameter: 3000mm, volume: approx. 49.5m³, mixing pipes: NW 150, motor power: 15kW. 5) 2x identical storage silos Zeppelin, year of construction: 1980, volume: 127m³, capacity: 119m³, silo diameter: 3500mm, inclination angle: 15°, hopper height: 1680mm, support ring height: 3700mm, total height: 17500mm. Documentation available. An on-site inspection is possible. Individual sale possible.

A Cepi flour silo is available. Containers: 2. Container capacity 1: 4000kg, container capacity 2: 4500kg. Including electrical control and weighing hopper. Documentation available. An on-site inspection is possible.

Stock number: F619, Liter: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On leg rack with 4 pcs. of wheels, Conveyor: In the bottom, W 300 x L 750 mm., Outlet for belt: H 0-65 x W 200 mm.

Silo system for granules or pellets up to 1000 kg/m3 Loading by bucket elevator Distribution with conveyor corners Discharge organs oscillomats Truck can be driven under Plant was only in operation for a short time

Closed stainless steel butter silo. Single jacketed. Vacuum on the silo is possible (manometer 0 / - 1,0 Bar). The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, no nametag on motor, only on drivework). Total capacity: 3.000 kg. Manhole, round, on one side and a sight glass on the same side. 1x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) on the back side and one on the side of the QHK butter silo (DN100). CIP cleanable with spraybowl in the top. Outfeed plate with 1x rectangular flange and 1x round DN100 flange on the outfeed of the silo. Excluding control panel or outfeed butterpumps., Type of Machine: Buttersilo, Capacity: 3.000 kg, Motor: +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, Dimensions: ± 275 x 200 x 225 cm, Weight: ± 1.500 kg

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

Flour silo ALU2 pieces made of ALUMINUMProduct descriptionManufacturer: AT HefeleIdeal for cellars height 200cmEach piece 4 clay pieces Silo per mass Diameter : 240cm Height : 190cmDetails see pictures.

Silo plant with a total gross capacity of 90 m³, consisting of 3 steel round silos of 30 m³ each. Usable volume per silo: 25 m³, diameter: 3,500 mm, total height: 5,850 mm, cylindrical height: 2,150 mm, cone height: 2,735 mm, cone inclination: 62.2°, outlet height: 965 mm, outlet cross-section: DN 250 mm. Silos have always been under roof and can be viewed in their assembled condition.

Containers, granule containers, storage tanks, powder containers, paint powder containers, storage containers, silo systems, tanks, silos -Silo system: Granule container on a solid base, stackable -Capacity: approx. 600 liters -Container: Material: Aluminum -Inlet/Outlet: 450 x 450 mm / Ø 200 mm Dimensions: see photos / technical drawing -Overall dimensions: 1190/1180/H1315 mm -Weight: 137 kg

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

Capacity per silo approx. 13.5 tons of flour with 100 kg scale VA Computer Dosimat MW Dimensions: 2,650 x 2,650 mm Height: approx. 4,200 mm complete with motor, control cabinet, etc. For Sale Price on request Phone +49 172 8345457

Used stainless steel, vertical silo made by German company AZO, capacity: 12 tons (approx. 7.2 m³). The silo features a vibrating floor, a silo discharge valve, and a blow-off pipe. Used for storing PVC powder. 10 units available.

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Cone 90 ° No ladders and railings

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Cone 90 ° No ladder or railings

3 cylindroconical fermentation and storage tanks with frame and cone cooling, Additional title: Vertical stainless steel tanks with frame and cone cooling, Total volume: 3000 l, Pressure capacity: 3 bar, Length: 1860 mm, Width: 1860 mm, Height: 3700 mm, Material: stainless steel, Base construction: standing on feet, Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

3 vertical stainless steel tanks, each capable of being heated with hot water. Previously used as CIP tanks (2 x alkali tanks and 1 x acid tank), Additional title: heatable, vertical stainless steel vessel, Volume appr.: 1000 l, Width: 1 m, Height: 2 m, Weight: 250 kg, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with square tubular feet on spherical caps, Features: Top lid, temperature measurement, equipment for heating with hot water

Cylindro-conical fermentation tank made of austenitic steel., Additional title: vertical, coolable stainless steel tank, Capacity: 6300 l, Max. overpressure: 1 bar, Temperature range: 50 °C, Length: 1700 mm, Height: 4359 mm, Material: stainless steel 1.4571, 1.4404, 1.4301, Position: standing, vertical, Base construction: feet, Features: 2 x jacket cooling, 1 x cone cooling

60 cbm Aluminum Silo Manufacturer: Zeppelin Bulk density 0.6 Diameter 2.40 m Height without railing 15.50 m Cone 90 ° Head Railings Filter Rotary valve Drawing available

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Railings Cone 90 ° Drawing available Rotary valve

Lanfranchi Stainless Steel Silo - Silo A (2013) Auction-ID: A1-48805-38