126,702 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Three-phase electric motor CEM Type: HETT 132 MH4 ( HETT132MH4 ) Power: 9 kW Speed: 1440 rpm Voltage: 220/ 380 V Frequency: 50 Hz Design: B5, with flange Shaft diameter: 38 mm used tested !' Dimensions: 510 x 350 x 300 mm
For sale is a semi-automatic cup filling system for drinking yoghurt, ayran or similar. Key data on the plant: - Semi-automatic, i.e. the cup must be inserted and the button pressed for each filling. - Lid diameter: 75 mm - Capacity: Up to 300 ml - Power consumption: 1 kW (230 V plug) - Pneumatic: Compressor required. If you are interested, our compressor can also be purchased. (Please inquire separately!) - Pipe connection DN 32 (direct connection to tank possible, so that the liquid can be sucked off the system with a slope - Country of manufacture: Turkey - Thermal sealing: temperature adjustable. Aluminum lids (75 mm) were used with this system. - Magazine for sealing board available. These are placed on the cup by the system itself - Filling capacity: Variable depending on the filling quantity: 250 ml were filled with this system. Here, about 600 cups/hour were possible. ...
The system has been modernized several times by Cemecon, most recently in 2023 to the latest software version Last service 2023 of Cemecon Pure research plant: number of batches approx. 1600 processes The facility is equipped as follows: Six cathodes All DC cathodes, two of them also HIPIMS BIAS: DC, MF, HIPIMS Booster Anodes 3 x heaters Interface for precise tapping of the Peak –I, -U + -P in HIPIMS mode via BNC (with oscilloscope) 2 turbopumps 4 gases, 1 of which is flammable Table of 6 The following accessories can be taken over with the system: water/water heat exchanger, second 6-seater table with base and "pallet truck", 2-person gas cylinder cabinet, spare sheet set, spare heaters, charging material, many targets (all German manufacturers, no China imports) and a variety of accessories and spare parts.
The system has been upgraded several times by Cemecon, the last time in 09/23 to the latest software Pure research facility, only about 5500 processes run. Last service: 2023 by Cemecon. 4 cathodes 5 gases, 1 of which is flammable Anodes all 4 cathodes DC or MF pulsed BIAS: DC or MF pulsed 1x Heater
Balancing machine CEMB ZE-300 / GV - new in1992 - machine weight 1.8 t, power input 1.8 kW - revolutions 200 - 2000 rpm - length of part for balancing up to 3000 mm
Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!
Electric motor, three-phase motor -Power: 0.18 kW -Speed: 3000 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Dimensions: 290/165/H220 mm -Weight: 16.7 kg
Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Dimensions: 355/167/H230 mm -Weight: 23.7 kg
Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 360/260/H200 mm -Weight: 32 kg
Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Dimensions: 315/260/H200 mm -Weight: 24.6 kg
electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft diameter: 19 mm -Design: B14 Protection class: IP EX -Weight: 20 kg
geared motor, electric motor -EX protected -Speed: approx. 35 rpm -Power: 0.18 kW -Design: B3 angle -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Weight: 15 kg
range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4, 3/8, and 1/2, including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4, 3/8, ...
Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
Façade panels fibre cement JAMES HARDI - 93.02 m² - 25 pcs., pallet content, special rejects, natural fibre cement surface with different colour (colour not selectable), thickness 8 mm, weight per sqm: approx. 11.2 kg, format: approx. 305x122 cm, fire class: A2-S1, d0 (DIN EN 13501-1), scrap from production mot opt. defects but fully functional, slight dimensional deviations, these are raw panels - hemming necessary, panels are not 100% right-angled, weather-resistant, paintable - ATTENTION: SAMPLE PHOTO
For sale is a used CEMO spray system with a 500 liter tank (suitcase-shaped, with steel runners). The system is expressly sold as defective or as a spare parts donor. Details: • Manufacturer: CEMO • Tank volume: 500 litres • Year of manufacture / inspection: 2023 (see nameplate) • Incl. pump, control system (HCW City Sprayer / epoke), valves and attachments • Electrical components available Condition: • Significant signs of wear and dirt • Partly heavy rust on pump and metal parts • Functionality not tested / presumably limited • Fuel cap is missing • Sold only for cannibalization or as a spare parts carrier Auction-ID: 04F-QBK-2
used
Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...
Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann
An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.
This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40134-326
This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40134-327
On and including 1 pallet Auction-ID: A1-42014-274
-OHV Petrol engine 420cc - 13HP. -Working width 1600mm. -Blade diameter 2 x 780mm -New -No documents. Auction-ID: A3-43515-30093
Serial: 318248 Dimensions: 950 × 700 × 1800 mm Auction-ID: A7-45181-7
30978-0181. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-26
Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-147
S/N:PM20VPB913258. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-41
Missing front wheels Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-146
Balancing machine with laser touch sreen on and including 1 pallet Auction-ID: A1-42014-281
Digital display, incl. pallet, dimensions approx. 1500x1200 mm Auction-ID: A7-45974-1
Digital display, incl. pallet, dimensions approx. 1500x1200 mm Auction-ID: A7-45974-2
4 sheets; speed range 60-100 r/min; air Cooled; 6530 Auction-ID: A1-45901-7
From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...
Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...
maximum number of results exceeded
please refine your search
412 € 
