cement mill used for sale

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMax machining diameter670 mmMax. Turning Length1530 mmSpeed max.4000 rpmBar diametre80 mmMilling spindle upper side1 Movements X / Z / Y675/1562/300 (±150) mmSlewability of B-Axis±120 degreeSpeed max.12000 rpmNumber of Toolmagazine positions38 Lower Turret0 PositionsMovements X / Z200/1542 mmDrive power main spindle18,5/15 kWDrive power milling spindle28/23 kWDrive power tool spindle5,5/3,7 kWWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spin ...

x-travel: 6.500 mm y-travel: 1.500 mm z-travel: 2.000 mm Size of table plate: 10.000 x 1.100 mm table weight: 2,5 Kg /m² Kg feeds: 25.000 mm/min milling head: 2,5 tool taper: ISO 50 DIN 69871 number of spindle speeds: 20 - 4.000 U/min/rpm transmission ratio: 2 spindle drive: 30 kW Tools changer: 60 fach/tools Internal cooling system: 20 bar chip conveyor: Inkl. kW handwheel: Heidenhain HR-410 total power requirement: 63 kVA weight of the machine ca.: 34,5 t dimensions of the machine ca.: 11.275 x 4.840 x 4.13 mm Maximum tool diameter with adjacent tool positions occupied: 125 mm Maximum tool diameter with adjacent tool positions free: 250 mm Maximum tool length: 400 mm Maximum tool weight: 20 kg Additional tank with paper filter Operator platform Motor drives: SIEMENS DIGITAL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemper ...

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWDouble cartridge filter for coolantDouble Cartridge Filter for Coolant Options includes two filters placed on the coolant distributor. When one filter is stocked, operator can manually switched  ...

General2-axes universal turning center with fixed tools; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode Alternative Speed TurningTechnology cycle Alternate Spindle Speed (Turning) for the application of an alternate speed for vi ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

Milling machine Cincinnati Milacron Sabra 750 BJ 1998

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

Ball Mill GMP Manufacturer: Pharmag consisting of Pharmag Universal Actuator Type UAM and the BM-5 Stainless Steel Ball Mill Year of construction 2021 very good condition Documents available, incl. qualification.

Key data: 800 mm, 700 mm, 600 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 700 Z 600 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface Automatic Swivel Milling Head ( HORIZONTAL + VERTICAL ) Universal tool changer with 30 magazine positions as double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel IKZ – 40 bar Chip conveyor Rotoclear Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Swarf Spray Gun Operating Instructions

Key data: 1500 mm, 700 mm, 600 mm

Universal Milling Machine HURON MU6 Travel X: 1500 mm Travel Y: 700 mm Travel Z: 600 mm Spindle: SA 40 Spindle speed: from 30 to 2066 RPM Table size: Length 2000 mm x Width 460 mm Spindle motor: 12 CV Scale: 3 axes HEIDENHAIN Centralized lubrication sMachine sold as is, some works required: - freewheel of the advances box to be changed - Y-axis locking system needs to be checked - the ram inverter is non-functional - there is a leak on the spindle deflector - there is a missing pin on 1 gearbox lever Voltage: 380 V Length: 2200 mm (without ends table) Depth: 2000 mm Total height: 2000 mm Weight: approx 4 T

Note: The items offered are sold by us unchecked. No functional or technical tests have been carried out. Therefore, we cannot provide any information on function, completeness or technical condition. Traces of use and defects are possible. We expressly point out that a prior inspection of the items is strongly recommended in order to get an idea of the condition and scope of the goods offered. Auction-ID: A1-51029-40

Lot consisting of several CNC tool holders with steep taper interface SK50 Included are, among other things: Boring rods with indexable insert mount Boring Heads / Boring Tools Slip-on milling cutter mandrels Face milling heads with indexable inserts Various milling and drilling holders All tools are sold as a bundle in the condition shown Content may vary. Auction-ID: A1-51014-26

Barreto tiller / hydraulic tiller – incomplete (Used equipment / spare parts carrier / hobbyist object) • Manufacturer: Barreto Manufacturing, Inc. • Country of manufacture: USA • Ident/Serial Number: 5097 • Device type: hand-held hydraulic tiller • Design: self-propelled basic unit • Hydraulic travel and working drive • Operation via guide bar with several control levers • Hydraulic control block available • Various hydraulic lines and quick couplings available • Hydraulic tank and filter unit available • 2 large tread tires • Robust steel frame construction • Guard/guide bar in the operator area Missing parts / notes: • Motor is completely missing • Milling mill / milling rotor is completely missing • Motor mount or drive connection open • Device not operational due to the lack of main components • No functional test possible  ...

Disassemble yourself, Forklift present 2 tons. Auction-ID: A1-47366-135

Table power supply X-Y axis: 8-400 mm/min. Table power supply Z axis : 4-200 mm/min. Eilgang X-Y shaft: 2400 mm/min. Electrical flux Z axis:1200 mm/min. Heidenhain readout with probe Auction-ID: A1-47366-173

Equipped with: petrol engine, manual start, milling wheel approx. Ø 27 cm, milling wheel speed approx. 4,700 rpm, maximum milling height 25 cm above ground level, maximum milling depth 23 cm below ground level, direct belt drive, manual mobile, folding control lever, weight approx. 61 kg and dimensions approx. 142 × 58 × 114 cm (L×W×H), folded approx. 92 × 58 × 59 cm. NEW ENGINE NOT YET RUN Auction-ID: A1-47394-291

Barreto 1620B Hydraulic Tiller (defective / hobbyist object) • Manufacturer: Barreto Manufacturing, Inc. • Model: 1620B • Design: Self-propelled hydraulic tiller / rototiller • Engine: Briggs & Stratton Vanguard • Engine power: 16 HP • Engine type: V-twin petrol engine • Drive: Hydraulic • Travel drive: Hydraulic • Operation: Handheld Equipment / Construction: • Hydraulic drive • Hydraulically driven milling shaft • Milling rotor with solid milling blades / chopping blades • Control lever for travel and milling drive • Hydraulic valve block • Various hydraulic hoses and connections • Coarse drive tyres • Robust tubular frame / protective bar • Protective cover over the milling rotor • Briggs & Stratton Vanguard 16 HP V-Twin petrol engine Condition: • Device is defective • Expressly offered as a hobbyist object / spar ...

Barreto Rotary Tiller / Trencher – Incomplete / Spare Parts Carrier (Used equipment / hobbyist object) • Manufacturer: Barreto Manufacturing, Inc. • Country of manufacture: USA • Ident/Serial Number: 10958 • Equipment type: walk-behind hydraulic tillage machine/tiller • Design: self-propelled basic unit with hydraulic drive system • Tyres: 2 large tread tyres • Operation: via guide handle with several control levers • Hydraulic system with hydraulic lines and quick couplings • Hydraulic filter available • Protection/retaining bracket on the rear of the device area • Robust steel frame construction Missing parts / notes: • Motor is completely missing • Milling machine / milling unit is completely missing • Device therefore not operational • Offer expressly as an incomplete basic device / hobbyist object or spare parts carrier • Various ...

Hammer mill, ccm grain, equipped with 257Kw MAN water-cooled engine. Automatic addition for acid/bacteria Auction-ID: A1-47394-39

max. Displacement speed 65 m/min Max working speed 45 m/min. Controller HNC, 4 axes simultaneous Motor HNC motor Automatic tool change Swivel milling motor can mill an angle with oblique phase to the material. Aluminum vacuum table divisible into zones, lockable on the front by means of switches Auction-ID: A1-47366-95

Universal milling machine CME (Spain) Model FU-1E Longitudinal displacement : 1000 mm Transverse travel : 300 mm Displacement height : 500 mm Table dimensions : 1300 x 300 mm Machine dimensions W x D x H : 1900 x 1500 x 2200 mm Universal Huron type milling head with ISO 40 holder Includes various tool mounts and milling Auction-ID: A1-47366-73

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2240

Manufacturer: Brandt Kantentechnik GmbH Model: Optimat KDN 350 C Machine type: single-sided edge banding machine Year of Make: 2005 Engine No.: 0-261-06-3872 Electrical connection: 400 V / 50 Hz / 3~ Control voltage: 24 V Fuse: 16 A Edge thickness: 0.4–3 mm Workpiece thickness: 8–50 mm Workpiece width: min. 70 mm Workpiece length: min. 140 mm Feed rate: 11 m/min Edge magazine: automatic for roll material and fixed lengths Cross-cut unit: 2 motors, 0.18 kW / 12,000 rpm each Milling unit: top/bottom, 2 × 0.27 kW / 12,000 rpm Shape milling unit: top/bottom Scraper unit: for PVC edging Buffing unit: 2 motors, 0.09 kW each Control: electronic PC control Accessories: existing edge rollers and edge material to the right of the machine included Suction: separate small suction unit behind the machine included Auction-ID: A ...

Technical data Manufacturer: Haas Automation, Inc. Model No.: VF-3YT Serial Number: 1126820 Date of manufacture: 03/2015 Travels: X 1,016 mm / Y 660 mm / Z 635 mm Table: approx. 1,372 × 610 mm, 7 T-slots, 80 mm spacing Spindle holder: 40-taper Power supply: 3-phase, 50/60 Hz, 354-488 V AC Full load current: 40 A Maximum load current: 70 A Control: Haas CNC Control Version: Vertical CNC machining center, YT version with extended Y-travel Configuration Equipment: Tool changer with tool holders, T-slot table, work area with cooling/lubrication device. Remarks - 2026 Buffer battery replaced - Without clamped or surface-mounted tools! Offer refers to the machine only! Note Only operating instructions, but no technical documents available. Information researched to the best of our knowledge and belief. No guarantee is assumed for completeness and corre ...

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040; Catalogue number: ZAFS51040; Provides up to 800 L/day of clinical laboratory reagent water; Dispensing Flow <4 L/min; Operating weight of 222 kg (489.4 lb); Flow rate of 4 L/min; Make-up flow rate of 40 L/h; 800 L/day maximum. use; Resistivity: >15 MΩ-cm, at 25°C; H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches); Tank volume: 90 L, integrated; Total Oxidizable Carbon (TOC) Residues: <30 ppb (Produced Water); Comes with many accessories and filters:; 6 x Progard XL-S-C / PR0GTXLCS1 - Pre-treatment Pack; 2 x Q-GARD XL-4/QGARDTXL04 - Polishing Cartridge; 2 x Opticap XL Filter 4\" 0.22UM Q1 / 0PTIA04NN1 - Filter; 3 x Durapore Cartridge CVDI01TPS; Year of Manufacture: 2019; Resins and filters need to be changed.; Delivered without connectors;  ...

Millipore Milliflex PLUS MXP PUMP 03; ; Model: MXP PLUS 03; With 3 microwire adapters; 3 Filtration Pumps (Milliflex Plus); 3 x 24 W; ; Internal reference: FA-1329; Auction-ID: A1-50994-1094

Year & Manufacturer: Bobcat. Working parameters: Hydraulic milling machine for planing pavements, with rotor equipped with milling teeth and visible hydraulic adjustment. Equipment included: Hydraulic hoses and integrated control cylinders. Notes: Heavily worn condition with significant corrosion visible on structure, components and hoses. Several milling teeth are visible. Auction-ID: A1-50671-10

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2239

W-axis 630 mm Table dimensions (lxw) 1,250 x 1,400 mm Number of tables 1 Auction-ID: A1-50373-15

USED HERMLE FWH 630 MECHANICAL MILLING MACHINE Serial No.: 3221 Table dimensions: 650 x 180 mm Strokes: X=450 - Y=120 - Z=340 mm Spindle speed: 100 to 4480 rpm Equipped with 1 SA30 cone tilting head Manual and automatic longitudinal movement Dimensions and weight Pallet Europe 1200x1200xH1800mm - weight 600 kg Auction-ID: A1-50950-25

Auction-ID: A1-50373-16

Main spindle drive power 14 kW Table dimensions (lxw) 1000 x 560 mm Table load 800 kg Number of tool locations in the magazine 20 incl. handwheel Auction-ID: A1-50373-13

Table dimensions (lxw) 1800 x 1500 mm Table load 15000 kg Speed 2.3 - 810 rpm Spindle stroke max.800 mm Total power requirement 30 kW Table size 2,000 x 1,500 mm Face plate with NC face slide and NC rotary table Heidenhain Digital Display Various tool holders Various clamping devices Auction-ID: A1-50373-14

5-axis universal machining centre, Hermle Siemens CNC control (control panel with TFT screen) Round/swivel table integrated Tool magazine available Full protection cab Electronic handwheel Coolant Setup Machine Light CE marking Auction-ID: A1-51071-7

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2241

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Control: Dialog 11 total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3 x 4 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mill, year 2000, CNC 0i - MD. Used machine. More info & price on IndustrialBuyer.

Reckermann FW 1300 S - Vertical milling machine - 3-axis - Heidenhain position display - Vertical head - Year of construction 1983 Technical data - X-travel: 1175 mm - Y-travel: 430 mm - Z-travel: 430 mm - Table size: 1500 x 400 mm - Milling carriage horizontally adjustable: 430 mm - Distance from spindle center to stand: 670 mm - Quill stroke vertical: 80 mm - Spindle taper: ISO 50 - Milling speed: 33 - 1800 rpm - Feeds longitudinal and transverse: 10 - 1000 mm/min - Feeds vertical: 4 - 400 mm/min - Rapid traverse longitudinal & transverse: 4.0 m/min - Rapid traverse vertical: 1.6 m/min - Feed motor: 3.2 kW - Coolant pump: 0.1 kW - Drive power: 14.8 W - Dimensions: approx. 3000 x 2200 x 2000 mm - Machine weight: approx. 4000 kg

- Engine power 0.94 KW-2690 rpm. - Maximum part capacity 150 x 75 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-605

- Motor power 0.75 KW. - Maximum rotational speed 3400 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-606

Machine Type: Milling Machine Manufacturer: Hermle Type: FW 801 Condition: used Offer will only be sent if a complete imprint is provided! Price 3.450 Euro incl. 19% VAT Location Warstein , Germany Reference number M-HER-1026 DESCRIPTION We offer you a used milling machine from the manufacturer Hermle. Incl. machine vise, Counter bearing for horizontal milling and mounted cutter head. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your complete contact details in order to receive an offer with our terms and conditions of payment. Errors in the descriptions and offers are reserved

CNC universal milling machine HERMLE U 630 T With track control Heidenhain TNC 426 Year of Make: 1998 Travel: X 630 (875) Y 500 Z 500 Speed range: 20 – 7,000 rpm infinitely variable With the following accessories: Rigid angle table 900 mm x 528 mm clamping surface Vertical tool changer with 16 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Heidenhain Coolant Setup 4 Height Adjustable M

Manufacturer: AYCE Maquinaria S.A.L. – Spain Model: AC100-K4 Year of Manufacture: 1999 Serial Number: 744 Machine Type: CNC Horizontal Boring and Milling Machine Country of Origin: Spain 1. Technical Specifications Specification Value Spindle diameter 100 mm Spindle taper ISO 50 / MT5 (depending on configuration) Spindle speed range 12–1,200 rpm Number of spindle speeds 18 Horizontal spindle travel (W-axis) 700 mm Vertical headstock travel (Y-axis) 1,200 mm Longitudinal table travel (X-axis) 1,500 mm Cross travel (Z-axis) 1,700 mm Rotary table dimensions 1,100 × 1,200 mm Table rotation (B-axis) 360° Working feed rates 2–1,500 mm/min Rapid traverse (X/Y/Z) 3,000 mm/min Rapid traverse (spindle) 1,500 mm/min Electrical power 16 kW Electrical supply 380 V Frequency 50 Hz Approximate machine weight 12,700 kg Auction-ID: A1-51153-72

New and used milling cutters and drills. Various manufacturers Approx. 300-350 pieces The table is not part of the auction. Auction-ID: A7-51143-1

Bridgeport Interact 1 CNC Milling Machine Type: CNC milling machine Manufacturer: Bridgeport Model: Interact 1 X-axis travel: 457 mm Y-axis travel: 305 mm Z-axis travel: 365 mm T-slot table size: 410 x 1065 mm Speed range: up to 4000 rpm Machine weight: 1600 kg Dimensions (L x W x H): approx 1700 x 1300 x 2300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-19

Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-51153-7

Hexagon M&H RWP38 – Tool Setting Probe 3D ISO50 Auction-ID: A1-51153-67

Vintage: 2018 Appellation: Champagne Region: Champagne Quantity: 6 bottles Capacity: 75 cl Classification: Hommage William Deutz Meurtet Vintage 2018 - Brut - Champagne Deutz - Champagne Packaging: case of origin Auction-ID: A1-51167-20

FOOKE ENDURA 83.1 Portal milling machine The FOOKE ENDURA 83.1 is a 5-axis CNC portal milling machine with three linear axes X, Y, Z and two rotary axes A and C. The clamping surface consists of two machine tables of 3,200 mm x 1,000 mm each. An additional, brand-new spindle unit from the manufacturer SPL is included in the scope of delivery. Year of construction 2003 Control SIEMENS SINUMERIK 840D Travel X - 3,500 mm / Y - 2,500 mm / Z - 1,200 mm / A - ± 120° / C - 365° Rapid traverse X/Y/Z axis up to 20 m/min Rotation speed A/C axis up to 15 rpm Equipment: Spindle HSK 63A make SPL, type/DRF-FO-180M-W-16-34 with 34 kW up to 16,000 rpm. Tool changer for 20 tools / diameter up to 100 mm Internal cooling IKZ up to 30 bar Spindle cooling Paper belt filter system KNOLL Hinged belt chip conveyor KNOLL Automatic doors Full enclosure Electronic handwheel Machin ...